scholarly journals Multiscale Structure of Starches Grafted with Hydrophobic Groups: A New Analytical Strategy

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2827 ◽  
Author(s):  
Chloé Volant ◽  
Alexandre Gilet ◽  
Fatima Beddiaf ◽  
Marion Collinet-Fressancourt ◽  
Xavier Falourd ◽  
...  
Keyword(s):  
Amylose Content ◽  
Low Cost ◽  
Hydroxyl Groups ◽  
Analytical Strategy ◽  
Multiscale Structure ◽  
Specific Analysis ◽  
Free Hydroxyl ◽  
Chemical Groups ◽  
Multiangle Laser Light Scattering ◽  
First Time

Starch, an abundant and low-cost plant-based glucopolymer, has great potential to replace carbon-based polymers in various materials. In order to optimize its functional properties for bioplastics applications chemical groups need to be introduced on the free hydroxyl groups in a controlled manner, so an understanding of the resulting structure-properties relationships is therefore essential. The purpose of this work was to study the multiscale structure of highly-acetylated (degree of substitution, 0.4 < DS ≤ 3) and etherified starches by using an original combination of experimental strategies and methodologies. The molecular structure and substituents repartition were investigated by developing new sample preparation strategies for specific analysis including Asymmetrical Flow Field Flow Fractionation associated with Multiangle Laser Light Scattering, Nuclear Magnetic Resonance (NMR), Raman and Time of Flight Secondary Ion Mass spectroscopies. Molar mass decrease and specific ways of chain breakage due to modification were pointed out and are correlated to the amylose content. The amorphous structuration was revealed by solid-state NMR. This original broad analytical approach allowed for the first time a large characterization of highly-acetylated starches insoluble in aqueous solvents. This strategy, then applied to characterize etherified starches, opens the way to correlate the structure to the properties of such insoluble starch-based materials.

The synthesis and structure of silica-supported bis(h5-cyclopentadienyl)dichlorotitanium(IV) complexes

1986 ◽  
Vol 51 (7) ◽  
pp. 1430-1438 ◽  
Author(s):  
Alena Reissová ◽  
Zdeněk Bastl ◽  
Martin Čapka
Keyword(s):  
Free Surface ◽  
Hydroxyl Groups ◽  
Titanium Complex ◽  
Surface Hydroxyl ◽  
Surface Hydroxyl Groups ◽  
Free Hydroxyl ◽  
Cyclopentadienyl Anion

The title complexes have been obtained by functionalization of silica with cyclopentadienylsilanes of the type Rx(CH3)3 - xSi(CH2)nC5H5 (x = 1-3, n = 0, 1, 3), trimethylsilylation of free surface hydroxyl groups, transformation of the bonded cyclopentadienyl group to the cyclopentadienyl anion, followed by coordination of (h5-cyclopentadienyl)trichlorotitanium. The effects of single steps of the above immobilization on texture of the support, the number of free hydroxyl groups, the coverage of the surface by cyclopentadienyl groups and the degree of their utilization in anchoring the titanium complex have been investigated. ESCA study has shown that the above anchoring leads to formation of the silica-supported bis(h5-cyclopentadienyl)dichlorotitanium(IV) complex.

scholarly journals Chitosan Adsorbent Derivatives for Pharmaceuticals Removal from Effluents: A Review

Macromol ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 130-154
Author(s):  
Efstathios V. Liakos ◽  
Maria Lazaridou ◽  
Georgia Michailidou ◽  
Ioanna Koumentakou ◽  
Dimitra A. Lambropoulou ◽  
...  
Keyword(s):  
Emerging Contaminants ◽  
Low Cost ◽  
Value Added ◽  
Ph Effects ◽  
Hydroxyl Groups ◽  
Research Papers ◽  
Natural Polysaccharide ◽  
Best Fitting ◽  
Isotherm And Kinetic Models ◽  
Published Research

Chitin is mentioned as the second most abundant and important natural biopolymer in worldwide scale. The main sources for the extraction and exploitation of this natural polysaccharide polymer are crabs and shrimps. Chitosan (poly-β-(1 → 4)-2-amino-2-deoxy-d-glucose) is the most important derivative of chitin and can be used in a wide variety of applications including cosmetics, pharmaceutical and biomedical applications, food, etc., giving this substance high value-added applications. Moreover, chitosan has applications in adsorption because it contains amino and hydroxyl groups in its molecules, and can thus contribute to many possible adsorption interactions between chitosan and pollutants (pharmaceuticals/drugs, metals, phenols, pesticides, etc.). However, it must be noted that one of the most important techniques of decontamination is considered to be adsorption because it is simple, low-cost, and fast. This review emphasizes on recently published research papers (2013–2021) and briefly describes the chemical modifications of chitosan (grafting, cross-linking, etc.), for the adsorption of a variety of emerging contaminants from aqueous solutions, and characterization results. Finally, tables are depicted from selected chitosan synthetic routes and the pH effects are discussed, along with the best-fitting isotherm and kinetic models.

scholarly journals Evaluation of indigenous aromatic rice cultivars from sub-Himalayan Terai region of India for nutritional attributes and blast resistance

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Debayan Mondal ◽  
Prudveesh Kantamraju ◽  
Susmita Jha ◽  
Gadge Sushant Sundarrao ◽  
Arpan Bhowmik ◽  
...  
Keyword(s):  
Nutritive Value ◽  
Amylose Content ◽  
Blast Resistance ◽  
Starch Content ◽  
Low Cost ◽  
Principal Component ◽  
Blast Disease ◽  
Basmati Rice ◽  
Phenotypic Traits ◽  
Rice Cultivars

AbstractIndigenous folk rice cultivars often possess remarkable but unrevealed potential in terms of nutritional attributes and biotic stress tolerance. The unique cooking qualities and blissful aroma of many of these landraces make it an attractive low-cost alternative to high priced Basmati rice. Sub-Himalayan Terai region is bestowed with great agrobiodiversity in traditional heirloom rice cultivars. In the present study, ninety-nine folk rice cultivars from these regions were collected, purified and characterized for morphological and yield traits. Based on traditional importance and presence of aroma, thirty-five genotypes were selected and analyzed for genetic diversity using micro-satellite marker system. The genotypes were found to be genetically distinct and of high nutritive value. The resistant starch content, amylose content, glycemic index and antioxidant potential of these genotypes represented wide variability and ‘Kataribhog’, ‘Sadanunia’, ‘Chakhao’ etc. were identified as promising genotypes in terms of different nutritional attributes. These cultivars were screened further for resistance against blast disease in field trials and cultivars like ‘Sadanunia’, ‘T4M-3-5’, ‘Chakhao Sampark’ were found to be highly resistant to the blast disease whereas ‘Kalonunia’, ‘Gobindabhog’, ‘Konkanijoha’ were found to be highly susceptible. Principal Component analysis divided the genotypes in distinct groups for nutritional potential and blast tolerance. The resistant and susceptible genotypes were screened for the presence of the blast resistant pi genes and association analysis was performed with disease tolerance. Finally, a logistic model based on phenotypic traits for prediction of the blast susceptibility of the genotypes is proposed with more than 80% accuracy.

scholarly journals UV Inscription and Pressure Induced Long-Period Gratings through 3D Printed Amplitude Masks

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1977
Author(s):  
Ricardo Oliveira ◽  
Liliana M. Sousa ◽  
Ana M. Rocha ◽  
Rogério Nogueira ◽  
Lúcia Bilro
Keyword(s):  
State Of The Art ◽  
Low Cost ◽  
Resonance Wavelength ◽  
Complex Structures ◽  
Pressing Method ◽  
Long Period ◽  
Long Period Gratings ◽  
3D Printed ◽  
Mechanical Pressing ◽  
First Time

In this work, we demonstrate for the first time the capability to inscribe long-period gratings (LPGs) with UV radiation using simple and low cost amplitude masks fabricated with a consumer grade 3D printer. The spectrum obtained for a grating with 690 µm period and 38 mm length presented good quality, showing sharp resonances (i.e., 3 dB bandwidth < 3 nm), low out-of-band loss (~0.2 dB), and dip losses up to 18 dB. Furthermore, the capability to select the resonance wavelength has been demonstrated using different amplitude mask periods. The customization of the masks makes it possible to fabricate gratings with complex structures. Additionally, the simplicity in 3D printing an amplitude mask solves the problem of the lack of amplitude masks on the market and avoids the use of high resolution motorized stages, as is the case of the point-by-point technique. Finally, the 3D printed masks were also used to induce LPGs using the mechanical pressing method. Due to the better resolution of these masks compared to ones described on the state of the art, we were able to induce gratings with higher quality, such as low out-of-band loss (0.6 dB), reduced spectral ripples, and narrow bandwidths (~3 nm).

scholarly journals Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3694
Author(s):  
Luminita Georgeta Confederat ◽  
Cristina Gabriela Tuchilus ◽  
Maria Dragan ◽  
Mousa Sha’at ◽  
Oana Maria Dragostin
Keyword(s):  
Antimicrobial Activity ◽  
Low Cost ◽  
Hydroxyl Groups ◽  
Pharmacological Properties ◽  
Natural Polymers ◽  
Economic Sectors ◽  
Physico Chemical ◽  
Long Time ◽  
Resistant Strains ◽  
Strength And Durability

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.

scholarly journals High catalytic activity for formaldehyde oxidation of an interconnected network structure composed of δ-MnO2 nanosheets and γ-MnOOH nanowires

2020 ◽  
Vol 8 (4) ◽  
pp. 429-439
Author(s):  
Ying Tao ◽  
Rong Li ◽  
Ai-Bin Huang ◽  
Yi-Ning Ma ◽  
Shi-Dong Ji ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Network Structure ◽  
Manganese Oxides ◽  
Active Oxygen Species ◽  
Low Cost ◽  
High Dispersion ◽  
Hydroxyl Groups ◽  
High Catalytic Activity ◽  
Interconnected Network ◽  
Surface Hydroxyl

AbstractAmong the transition metal oxide catalysts, manganese oxides have great potential for formaldehyde (HCHO) oxidation at ambient temperature because of their high activity, nontoxicity, low cost, and polybasic morphologies. In this work, a MnO2-based catalyst (M-MnO2) with an interconnected network structure was successfully synthesized by a one-step hydrothermal method. The M-MnO2 catalyst was composed of the main catalytic agent, δ-MnO2 nanosheets, dispersed in a nonactive framework material of γ-MnOOH nanowires. The catalytic activity of M-MnO2 for HCHO oxidation at room temperature was much higher than that of the pure δ-MnO2 nanosheets. This is attributed to the special interconnected network structure. The special interconnected network structure has high dispersion and specific surface area, which can provide more surface active oxygen species and higher surface hydroxyl groups to realize rapid decomposition of HCHO.

Substitutional and solvation effects on conformational equilibria. Effects on the interaction between opposing axial oxygen atoms

1969 ◽  
Vol 47 (23) ◽  
pp. 4441-4446 ◽  
Author(s):  
R. U. Lemieux ◽  
A. A. Pavia
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Hydrogen Bonding ◽  
Magnetic Resonance ◽  
Hydroxyl Groups ◽  
Evidence Based ◽  
Electrostatic Repulsion ◽  
Hydrogen Bridge ◽  
Conformational Equilibria ◽  
Free Hydroxyl ◽  
Oxygen Atoms

Evidence based both on nuclear magnetic resonance and rotation data primarily obtained from methyl 3-deoxy-β-L-erythro-pentopyranoside and a number of its derivatives is interpreted to show that the electrostatic repulsion between the oxygen atoms at the 2 and 4 positions is substantially less when these oxygens are linked to acyl groups than when in the form of either methyl ethers or as hydroxyl groups hydrogen bonded to solvent. Also, experimental evidence is presented which requires the hydrogen bridge between two axially disposed hydroxyl groups to be substantially strengthened by hydrogen bonding of the free hydroxyl by solvent.

Printing ultrathin graphene oxide nanofiltration membranes for water purification

2017 ◽  
Vol 5 (39) ◽  
pp. 20860-20866 ◽  
Author(s):  
Mahdi Fathizadeh ◽  
Huynh Ngoc Tien ◽  
Konstantin Khivantsev ◽  
Jung-Tsai Chen ◽  
Miao Yu
Keyword(s):  
Graphene Oxide ◽  
Water Purification ◽  
Inkjet Printing ◽  
Low Cost ◽  
Nanofiltration Membranes ◽  
Highly Effective ◽  
First Time ◽  
Polymeric Supports ◽  
Effective Water

We demonstrated for the first time that inkjet printing can be a low-cost, easy, fast, and scalable method for depositing ultrathin (7.5–60 nm) uniform graphene oxide (GO) nanofiltration membranes on polymeric supports for highly effective water purification.

Light-Mediated Cross-Coupling of Anomeric Trifluoroborates

2021 ◽  
Author(s):  
Eric Miller ◽  
Maciej Walczak
Keyword(s):  
Cross Coupling ◽  
Hydroxyl Groups ◽  
Anomeric Effect ◽  
Computational Studies ◽  
Carbohydrate Chemistry ◽  
New Class ◽  
Free Hydroxyl ◽  
Anomeric Carbon ◽  
Stereoselective Reactions

Stereoselective reactions at the anomeric carbon constitute the cornerstone of preparative carbohydrate chemistry. Here, we report the synthesis of axial C1 trifluoroborates and stereoselective C-arylation and etherification reactions under photoredox conditions. These reactions are characterized by high anomeric selectivities for 2-deoxysugars and broad substrate scope (24 examples), including disaccharides and trifluoroborates with free hydroxyl groups. Computational studies show that high axial selectivities for these reactions originate from a combination of kinetic anomeric effect of the intermediate C1 radical and stereoelectronic stabilization of Ni(III) through the metallo-anomeric effect. Taken together, this new class of carbohydrate reagents adds the palette of anomeric nucleophile reagents suitable for efficient installation C-C and Cheteroatom bonds.

Sign in / Sign up

Export Citation Format

Share Document