scholarly journals Dynamic Effect of Operational Regulation on the Mesophilic BioMethanation of Grape Marc

Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6692
Author(s):  
Josue Kassongo ◽  
Esmaeil Shahsavari ◽  
Andrew S. Ball
Keyword(s):  
Dynamic Effect ◽  
Cost Effective ◽  
Pollutant Removal ◽  
Trophic Relationships ◽  
Operational Parameters ◽  
Wine Production ◽  
Grape Marc ◽  
Substrate To Inoculum Ratio ◽  
The Cost ◽  
Calculated Average

Wine production annually generates an estimated 11 million metric tonnes of grape marc (GM) worldwide. The diversion of this organic waste away from landfill and towards its use in the generation of renewable energy has been investigated. This study aimed to evaluate the effectiveness of operational parameters relating to the treatment regime and inoculum source in the extraction of methane from GM under unmixed anaerobic conditions at 35 °C. The study entailed the recirculation of a previously acclimated sludge (120 days) as downstream inoculum, an increased loading volume (1.3 kg) and a low substrate-to-inoculum ratio (10:3 SIR). The results showed that an incorporation of accessible operational controls can effectively enhance cumulative methane yield (0.145 m3 CH4 kg−1 VS), corresponding to higher amounts of digestible organics converted. The calculated average volumetric methane productivity equalled 0.8802 L CH4 LWork−1 d−1 over 33.6 days whilst moderate pollutant removal (43.50% COD removal efficiency) was achieved. Molecular analyses identified Firmicutes and Bacteroidetes phyla as core organisms for hydrolytic and fermentative stages in trophic relationships with terminal electron acceptors from the methane-producing Methanosarcina genus. Economic projections established that the cost-effective operational enhancements were sustainable for valorisation from grape marc by existing wineries and distilleries.

scholarly journals Assessment of Effective Operational Parameters on Removal of Amoxicillin from Synthetic Wastewater Using Electrocoagulation Process

2019 ◽  
pp. 1-8
Author(s):  
Davoud Balarak ◽  
Kethineni Chandrika ◽  
Marzieh Attaolahi
Keyword(s):  
Cost Effective ◽  
Synthetic Wastewater ◽  
Simultaneous Increase ◽  
Operational Parameters ◽  
Effective Removal ◽  
Electrocoagulation Process ◽  
Synthetic Solution ◽  
Water And Wastewater ◽  
Aluminum Electrodes ◽  
The Cost

In this study, efficiency of electrocoagulation (EC) process with aluminum electrodes for treatment of Amoxicillin (AMO) from synthetic solution has been studied and concluded. This experiment was conducted in a batch system with a volume of 1 L that had been equipped with four aluminum electrodes. The effect of operating parameters, such as voltage, time of reaction, initial AMO concentration, KCl concentration and pH on the AMO removal efficiency was investigated. In optimum condition (pH 7, voltage 60 V, electrolysis time 75 min, KCl concentration 3 g/L), electrocoagulation method was able to remove 98.8% of AMO antibiotics from synthetic solution.  In addition, it is found that an increase in the applied voltage the speed of the treatment significantly. However, simultaneous increase of electrode and energy consumption was observed. The method was found to be highly efficient and relatively fast compared to conventional existing techniques and also, it can be concluded that the electrocoagulation process has the potential to be utilized for the cost-effective removal of AMO from water and wastewater.

The IBM-PC in electron microscopy

1996 ◽  
Vol 54 ◽  
pp. 612-613
Author(s):  
James F. Mancuso
Keyword(s):  
Head Start ◽  
Image Acquisition ◽  
Cost Effective ◽  
Financial Applications ◽  
Number Of Factors ◽  
Instrument Control ◽  
The Cost ◽  
Training And Support ◽  
Control Image ◽  
Ibm Pc

IBM PC compatible computers are widely used in microscopy for applications ranging from control to image acquisition and analysis. The choice of IBM-PC based systems over competing computer platforms can be based on technical merit alone or on a number of factors relating to economics, availability of peripherals, management dictum, or simple personal preference.IBM-PC got a strong “head start” by first dominating clerical, document processing and financial applications. The use of these computers spilled into the laboratory where the DOS based IBM-PC replaced mini-computers. Compared to minicomputer, the PC provided a more for cost-effective platform for applications in numerical analysis, engineering and design, instrument control, image acquisition and image processing. In addition, the sitewide use of a common PC platform could reduce the cost of training and support services relative to cases where many different computer platforms were used. This could be especially true for the microscopists who must use computers in both the laboratory and the office.

Sonographically guided, transcatheter foam sclerotherapy of the great saphenous vein

Phlebologie ◽  
2007 ◽  
Vol 36 (06) ◽  
pp. 309-312 ◽  
Author(s):  
T. Schulz ◽  
M. Jünger ◽  
M. Hahn
Keyword(s):  
Saphenous Vein ◽  
Great Saphenous Vein ◽  
Clinical Stage ◽  
Clinical Signs ◽  
Cost Effective ◽  
Duplex Sonography ◽  
Foam Sclerotherapy ◽  
Average Loss ◽  
One Year ◽  
The Cost

Summary Objective: The goal of the study was to assess the effectiveness and patient tolerability of single-session, sonographically guided, transcatheter foam sclerotherapy and to evaluate its economic impact. Patients, methods: We treated 20 patients with a total of 22 varicoses of the great saphenous vein (GSV) in Hach stage III-IV, clinical stage C2-C5 and a mean GSV diameter of 9 mm (range: 7 to 13 mm). We used 10 ml 3% Aethoxysklerol®. Additional varicoses of the auxiliary veins of the GSV were sclerosed immediately afterwards. Results: The occlusion rate in the treated GSVs was 100% one week after therapy as demonstrated with duplex sonography. The cost of the procedure was 207.91 E including follow-up visit, with an average loss of working time of 0.6 days. After one year one patient showed clinical signs of recurrent varicosis in the GSV; duplex sonography showed reflux in the region of the saphenofemoral junction in a total of seven patients (32% of the treated GSVs). Conclusion: Transcatheter foam sclerotherapy of the GSV is a cost-effective, safe method of treating varicoses of GSV and broadens the spectrum of therapeutic options. Relapses can be re-treated inexpensively with sclerotherapy.

A Digital Economy Model for Talent Prediction Data Analytic

2019 ◽  
Vol 2 (4) ◽  
pp. 260-266
Author(s):  
Haru Purnomo Ipung ◽  
Amin Soetomo
Keyword(s):  
Business Model ◽  
Industrial Revolution ◽  
Technology Innovation ◽  
Cost Effective ◽  
Sharing Economy ◽  
Token Economy ◽  
Economy Model ◽  
New Business ◽  
The Cost ◽  
Data Analytic

This research proposed a model to assist the design of the associated data architecture and data analytic to support talent forecast in the current accelerating changes in economy, industry and business change due to the accelerating pace of technological change. The emerging and re-emerging economy model were available, such as Industrial revolution 4.0, platform economy, sharing economy and token economy. Those were driven by new business model and technology innovation. An increase capability of technology to automate more jobs will cause a shift in talent pool and workforce. New business model emerge as the availabilityand the cost effective emerging technology, and as a result of emerging or re-emerging economic models. Both, new business model and technology innovation, create new jobs and works that have not been existed decades ago. The future workers will be faced by jobs that may not exist today. A dynamics model of inter-correlation of economy, industry, business model and talent forecast were proposed. A collection of literature review were conducted to initially validate the model.

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

Production of Asbestos-free Brake Pad Using Groundnut Shell as Filler Material

2018 ◽  
Vol 4 (12) ◽  
Author(s):  
W. C. Solomon ◽  
M. T. Lilly ◽  
J. I. Sodiki
Keyword(s):  
Phenolic Resin ◽  
Cost Effective ◽  
Filler Material ◽  
Particle Sizes ◽  
Brake Pad ◽  
Brake Pads ◽  
Environmental Friendly ◽  
Sieve Size ◽  
Groundnut Shell ◽  
The Cost

The development and evaluation of brake pads using groundnut shell (GS) particles as substitute material for asbestos were carried out in this study. This was with a view to harnessing the properties of GS, which is largely deposited as waste, and in replacing asbestos which is carcinogenic in nature despite its good tribological and mechanical properties. Two sets of composite material were developed using varying particle sizes of GS as filler material, with phenolic resin as binder with percentage compositions of 45% and 50% respectively. Results obtained indicate that the compressive strength and density increase as the sieve size of the filler material decreases, while water and oil absorption rates increase with an increase in sieve size of GS particle. This study also indicates that the cost of producing brake pad can be reduced by 19.14 percent if GS is use as filler material in producing brake pad. The results when compared with those of asbestos and industrial waste showed that GS particle can be used as an effective replacement for asbestos in producing automobile brake pad. Unlike asbestos, GS-based brake pads are environmental friendly, biodegradable and cost effective.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

Monitoring effluent quality in hypertrophic wastewater reservoirs using remote sensing

1996 ◽  
Vol 33 (8) ◽  
pp. 23-29 ◽  
Author(s):  
I. Dor ◽  
N. Ben-Yosef
Keyword(s):  
Water Quality ◽  
Theoretical Model ◽  
Principal Component ◽  
Cost Effective ◽  
Operational Parameters ◽  
Effluent Quality ◽  
Optical Images ◽  
Routine Monitoring ◽  
Cost Effective Method ◽  
Wastewater Quality

About one hundred and fifty wastewater reservoirs store effluents for irrigation in Israel. Effluent qualities differ according to the inflowing wastewater quality, the degree of pretreatment and the operational parameters. Certain aspects of water quality like concentration of organic matter, suspended solids and chlorophyll are significantly correlated with the water column transparency and colour. Accordingly optical images of the reservoirs obtained from the SPOT satellite demonstrate pronounced differences correlated with the water quality. The analysis of satellite multispectral images is based on a theoretical model. The model calculates, using the radiation transfer equation, the volume reflectance of the water body. Satellite images of 99 reservoirs were analyzed in the chromacity space in order to classify them according to water quality. Principal Component Analysis backed by the theoretical model increases the method sensitivity. Further elaboration of this approach will lead to the establishment of a time and cost effective method for the routine monitoring of these hypertrophic wastewater reservoirs.

Pound Wise and Penny Foolish? Weight Loss and The Dynamics of Health Care Spending

2011 ◽  
Vol 14 (2) ◽  
Author(s):  
Thomas G Koch
Keyword(s):  
Weight Loss ◽  
Cost Savings ◽  
Cost Effective ◽  
Economic Consequences ◽  
Health Care Spending ◽  
Order Of Magnitude ◽  
Dynamic Measures ◽  
The Cost ◽  
The Impact ◽  
The Relationship

Current estimates of obesity costs ignore the impact of future weight loss and gain, and may either over or underestimate economic consequences of weight loss. In light of this, I construct static and dynamic measures of medical costs associated with body mass index (BMI), to be balanced against the cost of one-time interventions. This study finds that ignoring the implications of weight loss and gain over time overstates the medical-cost savings of such interventions by an order of magnitude. When the relationship between spending and age is allowed to vary, weight-loss attempts appear to be cost-effective starting and ending with middle age. Some interventions recently proven to decrease weight may also be cost-effective.

scholarly journals Cost-Effectiveness Analysis of BCG Vaccination against Tuberculosis in Indonesia: A Model-Based Study

Vaccines ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 707
Author(s):  
Afifah Machlaurin ◽  
Franklin Christiaan Karel Dolk ◽  
Didik Setiawan ◽  
Tjipke Sytse van der Werf ◽  
Maarten J. Postma
Keyword(s):  
Cost Effectiveness ◽  
Univariate Analysis ◽  
Cost Effective ◽  
Epidemiological Data ◽  
Control Programme ◽  
Detection Rates ◽  
Middle Income ◽  
Bcg Vaccination ◽  
Life Years ◽  
The Cost

Bacillus Calmette–Guerin (BCG), the only available vaccine for tuberculosis (TB), has been applied for decades. The Indonesian government recently introduced a national TB disease control programme that includes several action plans, notably enhanced vaccination coverage, which can be strengthened through underpinning its favourable cost-effectiveness. We designed a Markov model to assess the cost-effectiveness of Indonesia’s current BCG vaccination programme. Incremental cost-effectiveness ratios (ICERs) were evaluated from the perspectives of both society and healthcare. The robustness of the analysis was confirmed through univariate and probabilistic sensitivity analysis (PSA). Using epidemiological data compiled for Indonesia, BCG vaccination at a price US$14 was estimated to be a cost-effective strategy in controlling TB disease. From societal and healthcare perspectives, ICERs were US$104 and US$112 per quality-adjusted life years (QALYs), respectively. The results were robust for variations of most variables in the univariate analysis. Notably, the vaccine’s effectiveness regarding disease protection, vaccination costs, and case detection rates were key drivers for cost-effectiveness. The PSA results indicated that vaccination was cost-effective even at US$175 threshold in 95% of cases, approximating the monthly GDP per capita. Our findings suggest that this strategy was highly cost-effective and merits prioritization and extension within the national TB programme. Our results may be relevant for other high endemic low- and middle-income countries.

Sign in / Sign up

Export Citation Format

Share Document