scholarly journals Experimental Investigation on Stability, Viscosity, and Electrical Conductivity of Water-Based Hybrid Nanofluid of MWCNT-Fe2O3

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 136
Author(s):  
Solomon O. Giwa ◽  
Mohsen Sharifpur ◽  
Mohammad H. Ahmadi ◽  
S. M. Sohel Murshed ◽  
Josua P. Meyer
Keyword(s):  
Electrical Conductivity ◽  
Visual Inspection ◽  
Volume Concentration ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Hybrid Nanofluids ◽  
Uv Visible ◽  
The Stability

The superiority of nanofluid over conventional working fluid has been well researched and proven. Newest on the horizon is the hybrid nanofluid currently being examined due to its improved thermal properties. This paper examined the viscosity and electrical conductivity of deionized water (DIW)-based multiwalled carbon nanotube (MWCNT)-Fe2O3 (20:80) nanofluids at temperatures and volume concentrations ranging from 15 °C to 55 °C and 0.1–1.5%, respectively. The morphology of the suspended hybrid nanofluids was characterized using a transmission electron microscope, and the stability was monitored using visual inspection, UV–visible, and viscosity-checking techniques. With the aid of a viscometer and electrical conductivity meter, the viscosity and electrical conductivity of the hybrid nanofluids were determined, respectively. The MWCNT-Fe2O3/DIW nanofluids were found to be stable and well suspended. Both the electrical conductivity and viscosity of the hybrid nanofluids were augmented with respect to increasing volume concentration. In contrast, the temperature rise was noticed to diminish the viscosity of the nanofluids, but it enhanced electrical conductivity. Maximum increments of 35.7% and 1676.4% were obtained for the viscosity and electrical conductivity of the hybrid nanofluids, respectively, when compared with the base fluid. The obtained results were observed to agree with previous studies in the literature. After fitting the obtained experimental data, high accuracy was achieved with the formulated correlations for estimating the electrical conductivity and viscosity. The examined hybrid nanofluid was noticed to possess a lesser viscosity in comparison with the mono-particle nanofluid of Fe2O3/water, which was good for engineering applications as the pumping power would be reduced.

Energy Efficient Hybrid Nanofluids for Tubular Cooling Applications

2014 ◽  
Vol 592-594 ◽  
pp. 922-926 ◽  
Author(s):  
Devasenan Madhesh ◽  
S. Kalaiselvam
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Concentration ◽  
Thermal Characteristics ◽  
Hybrid Nanofluid ◽  
Tubular Heat Exchanger ◽  
Overall Heat Transfer Coefficient ◽  
Flow Through ◽  
Hybrid Nanofluids

Analysis of heat transfer behaviour of hybrid nanofluid (HyNF) flow through the tubular heat exchanger was experimentally investigated. In this analysis the effects of thermal characteristics of forced convection, Nusselt number, Peclet number, and overall heat transfer coefficient were investigated.The nanofluid was prepared by dispersing the copper-titania hybrid nanocomposite (HyNC) in the water. The experiments were performed for various nanoparticle volume concentrations addition in the base fluid from the range of 0.1% to 1.0%. The experimental results show that the overall heat transfer coefficient was found to increases maximum by 30.4%, up to 0.7% volume concentration of HyNC.

scholarly journals Thermal Performance of Hybrid-Inspired Coolant for Radiator Application

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1100
Author(s):  
F. Benedict ◽  
Amit Kumar ◽  
K. Kadirgama ◽  
Hussein A. Mohammed ◽  
D. Ramasamy ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Volume Concentration ◽  
The Other ◽  
Hybrid Nanofluid ◽  
Hybrid Nanofluids ◽  
Tio2 Nanofluids

Due to the increasing demand in industrial application, nanofluids have attracted the considerable attention of researchers in recent decades. The addition of nanocellulose (CNC) with water (W) and ethylene glycol (EG) to a coolant for a radiator application exhibits beneficial properties to improve the efficiency of the radiator. The focus of the present work was to investigate the performance of mono or hybrid metal oxide such as Al2O3 and TiO2 with or without plant base-extracted CNC with varying concentrations as a better heat transfer nanofluid in comparison to distilled water as a radiator coolant. The CNC is dispersed in the base fluid of EG and W with a 60:40 ratio. The highest absorption peak was noticed at 0.9% volume concentration of TiO2, Al2O3, CNC, Al2O3/TiO2, and Al2O3/CNC nanofluids which indicates a better stability of the nanofluids’ suspension. Better thermal conductivity improvement was observed for the Al2O3 nanofluids in all mono nanofluids followed by the CNC and TiO2 nanofluids, respectively. The thermal conductivity of the Al2O3/CNC hybrid nanofluids with 0.9% volume concentration was found to be superior than that of the Al2O3/TiO2 hybrid nanofluids. Al2O3/CNC hybrid nanofluid dominates over other mono and hybrid nanofluids in terms of viscosity at all volume concentrations. CNC nanofluids (all volume concentrations) exhibited the highest specific heat capacity than other mono nanofluids. Additionally, in both hybrid nanofluids, Al2O3/CNC showed the lowest specific heat capacity. The optimized volume concentration from the statistical analytical tool was found to be 0.5%. The experimental results show that the heat transfer coefficient, convective heat transfer, Reynolds number and the Nusselt number have a proportional relationship with the volumetric flow rate. Hybrid nanofluids exhibit better thermal conductivity than mono nanofluids. For instance, a better thermal conductivity improvement was shown by the mono Al2O3 nanofluids than the CNC and TiO2 nanofluids. On the other hand, superior thermal conductivity was observed for the Al2O3/CNC hybrid nanofluids compared to the other mono and hybrid ones (Al2O3/TiO2).

Gelatin as an ecofriendly natural polymer for preparing colloidal silver@gold nanobranches

2016 ◽  
Vol 5 (5) ◽  
Author(s):  
Phuong Phong Nguyen Thi ◽  
Dai Hai Nguyen
Keyword(s):  
Ph Value ◽  
Component Ratio ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
Au Nps ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible ◽  
The Stability ◽  
Maximum Absorption Wavelength

AbstractWe report star-shaped silver@gold (Ag@Au) nanoparticles (NPs) in gelatin suspensions for the purpose of enhancing the stability of Ag@Au NPs. In this case, Ag NPs were designed as nucleating agents, whereas gelatin was used as a protecting agent for Au development. Especially, variable gelatin concentrations were also prepared to explore its ability to increase the stability of Ag@Au NPs. The obtained samples were then characterized by UV-visible spectroscopy, transmission electron spectroscopy (TEM), X-ray diffraction, and Fourier transform infrared spectroscopy. The maximum absorption wavelength of all samples (566–580 nm) indicated that branched Ag@Au@gelatin NPs were successfully synthesized. In addition, our TEM results revealed that the size of branched Ag@Au@gelatin NPs was found to be between 20 and 45 nm as influenced by the component ratio and the pH value. These results can provide valuable insights into the improvement of Ag@Au NP stability in the presence of gelatin.

Experimental Study on the Thermal Properties and Stability of Hybrid Nanofluids and Evaluation of its Heat Exchange Efficiency

2020 ◽  
Author(s):  
Yubai Xiao ◽  
Hu Zhang ◽  
Junmei Wu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Performance ◽  
Volume Concentration ◽  
High Thermal Conductivity ◽  
Transfer Efficiency ◽  
Working Fluid ◽  
Transfer Performance ◽  
Heat Transfer Efficiency ◽  
Hybrid Nanofluids

Abstract In recent years, hybrid nanofluids, as a new kind of working fluid, have been widely studied because they possessing better heat transfer performance than single component nanofluids when prepared with proper constituents and proportions. The application of hybrid nanofluids in nuclear power system as a working fluid is an effective way of improving the capability of In-Vessel Retention (IVR) when the reactor is in a severe accident. In order to obtain hybrid nanofluids with excellent heat transfer performance, three kinds of hybrid nanofluids with high thermal conductivity are measured by transient plane source method, and their viscosity and stability are also investigated experimentally. These experimental results are used to evaluate the heat transfer efficiency of hybrid nanofluids. The results show that: (1) The thermal conductivity of hybrid nanofluids increases with increasing temperature and volume concentration. When compared to the base fluid, the thermal conductivity of Al2O3-CuO/H2O, Al2O3-C/H2O and AlN-TiO2/H2O nanofluids at 0.25% volume concentration increased by 36%, 24%, and 22%, respectively. (2) Surfactants can improve the stability of hybrid nanofluids. The Zeta potential value is related to the thermal conductivity of the hybrid nanofluids, and it could be used to explain the relationship between the thermal conductivity of the hybrid nanofluids and the dispersion. It also could provide a reference for subsequent screening of high thermal conductivity nanofluids. (3) The addition of C/H2O can effectively reduce the dynamic viscosity coefficient of hybrid nanofluids. (4) The analysis of heat transfer efficiency of the hybrid nanofluids found that both Al2O3-CuO/H2O and Al2O3-C/H2O have better heat transfer ability than water under certain mixing conditions. This study is conducive to further optimizing hybrid nanofluids and its application to the In-Vessel Retention in severe reactor accidents.

Thermodynamic analysis of hybrid nanofluid based solar flat plate collector

2018 ◽  
Vol 15 (1) ◽  
pp. 27-39
Author(s):  
Ranga Babu J.A. ◽  
Kiran Kumar K. ◽  
Srinivasa Rao S.
Keyword(s):  
Pressure Drop ◽  
Flat Plate ◽  
Hybrid Nanoparticles ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Heat Gain ◽  
Content Type ◽  
Energy And Exergy ◽  
Hybrid Nanofluids ◽  
Flat Plate Collector

Purpose This paper aims to present an analytical investigation of energy and exergy performance on a solar flat plate collector (SFPC) with Cu-CuO/water hybrid nanofluid, Cu/water and CuO/water nanofluids as collector running fluids. Design/methodology/approach Heat transfer characteristics, pressure drop and energy and exergy efficiencies of SFPC working on these nanofluids are investigated and compared. In this study, a comparison is made by varying the mass flow rates and nanoparticle volume concentration. Thermophysical properties of hybrid nanofluids are estimated using distinctive correlations available in the open literature. Then, the influence of these properties on energy and exergy efficiencies of SFPC is discussed in detail. Findings Energy analysis reveals that by introducing the hybrid nanoparticles in water, the thermal conductivity of the working fluid is enhanced by 17.52 per cent and that of the individual constituents is enhanced by 15.72 and 15.35 per cent for Cu/water and CuO/water nanofluids, respectively. This resulted in 2.16 per cent improvement in useful heat gain for hybrid nanofluid and 1.03 and 0.91 per cent improvement in heat gain for Cu/water and CuO/water nanofluids, respectively. In line with the above, the collector efficiency increased by 2.175 per cent for the hybrid nanofluid and 0.93 and 1.05 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Exergy analysis elucidates that by using the hybrid nanofluid, exergy efficiency is increased by 2.59 per cent, whereas it is 2.32 and 2.18 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Entropy generation is reduced by 3.31, 2.35 and 2.96 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, as compared to water. Research limitations/implications However, this is associated with a penalty of increment in pressure drop of 2.92, 3.09 and 2.74 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, compared with water. Originality/value It is clear from the analysis that Cu-CuO/water hybrid nanofluids possess notable increment in both energy and exergy efficiencies to use them in SFPCs.

scholarly journals Impact of Employing Hybrid Nanofluids as Heat Carrier Fluid on the Thermal Performance of a Borehole Heat Exchanger

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2892
Author(s):  
Hossein Javadi ◽  
Javier F. Urchueguia ◽  
Seyed Soheil Mousavi Ajarostaghi ◽  
Borja Badenes
Keyword(s):  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Carrier ◽  
Pure Water ◽  
Coefficient Of Performance ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Borehole Heat Exchanger ◽  
Carrier Fluid ◽  
Hybrid Nanofluids

In this numerical study, 4 types of hybrid nanofluid, including Ag-MgO/water, TiO2-Cu/water, Al2O3-CuO/water, and Fe3O4-multi-wall carbon nanotube/water, have been considered potential working fluid in a single U-tube borehole heat exchanger. The selected hybrid nanofluid is then analyzed by changing the volume fraction and the Reynolds number. Based on the numerical results, Ag-MgO/water hybrid nanofluid is chosen as the most favorable heat carrier fluid, among others, considering its superior effectiveness, minor pressure drop, and appropriate thermal resistance compared to the pure water. Moreover, it was indicated that all cases of Ag-MgO/water hybrid nanofluid at various volume fractions (from 0.05 to 0.20) and Reynolds numbers (from 3200 to 6200) could achieve better effectiveness and lower thermal resistances, but higher pressure drops compared to the corresponding cases of pure water. Nevertheless, all the evaluated hybrid nanofluids present lower coefficient of performance (COP)-improvement than unity which means that applying them as working fluid is not economically viable because of having higher pressure drop than the heat transfer enhancement.

scholarly journals Fabrication of Electrical Conductivity and Reinforced Electrospun Silk Nanofibers with MWNTs

2017 ◽  
Vol 25 (0) ◽  
pp. 40-44 ◽  
Author(s):  
Liuyang Zuo ◽  
Feng Zhang ◽  
Bing Gao ◽  
Baoqi Zuo
Keyword(s):  
Electrical Conductivity ◽  
Nerve Repair ◽  
Electrospun Nanofibers ◽  
Fiber Axis ◽  
X Ray Diffraction ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Repair Materials ◽  
Nanoscale Fibers ◽  
Silk Fibroin Nanofibers

Electrospinning is an effective technique for fabricating submicron to nanoscale fibers from synthetic polymer as well as natural proteins. In this study, multiwalled carbon nanotubes (MWNTs) were embedded via electrospinning by adding MWNTs into the spinning dope, and found to be well aligned along the fiber axis in the silk fibroin nanofibers. The morphology and microstructure of the electrospun nanofibers were characterised using a field emission scanning electron microscope (FESEM) and Transmission electron microscopy (TEM). X-ray diffraction (XRD) and TG-DTA were used to study the crystal structure of the silk/MWNTs composite nanofibres, carried out to alter the strength, toughness and electrical conductivity of silk nanofibers by adding a small amount of MWNTs. The electrospun random silk mats with 1% MWNTs had a Young’s modulus, ultimate tensile strength and strain of 107.46 ± 9.15MPa, 9.94 ± 1.2MPa and 9.25 ± 1.5%, respectively, and electrical conductivity increased to 1.2×10-4S/cm. The silk/MWNTs composite nanofibres could potentially be applied in nerve repair materials owing to their excellent mechanical properties and electrical conductivity.

scholarly journals Investigation on Rheological Properties of Water-Based Novel Ternary Hybrid Nanofluids Using Experimental and Taguchi Method

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 28
Author(s):  
Jalal Mohammed Zayan ◽  
Abdul Khaliq Rasheed ◽  
Akbar John ◽  
Mohammad Khalid ◽  
Ahmad Faris Ismail ◽  
...  
Keyword(s):  
Shear Stress ◽  
Taguchi Method ◽  
Rheological Properties ◽  
Volume Concentration ◽  
Solid Particles ◽  
Hybrid Nanofluid ◽  
Damping Factor ◽  
Water Based ◽  
Hybrid Nanofluids ◽  
The Impact

This study presents the rheological behavior of water-based GO-TiO2-Ag and rGO-TiO2-Ag ternary-hybrid nanofluids. The impact of nanoparticles’ volumetric concentration and temperature on the rheological properties were studied. All experiments were performed under temperatures ranging from 25 to 50 °C in the solid volume concentration range of 0.5–0.00005%. The data optimization technique was adopted using the Taguchi method. The types of nanomaterials, concentration, temperature, and shear rate were chosen to optimize the viscosity and shear stress. The effect of shear stress, angular sweep, frequency sweep, and damping factor ratio is plotted. The experimental results demonstrated that the rheological properties of the ternary hybrid nanofluid depend on the ternary hybrid nanofluid’s temperature. The viscosity of ternary hybrid nanofluids (THNf) change by 40% for GO-TiO2-Ag and 33% for rGO-TiO2-Ag when temperature and shear rates are increased. All the ternary hybrid nanofluids demonstrated non-Newtonian behavior at lower concentrations and higher shear stress, suggesting a potential influence of nanoparticle aggregation on the viscosity. The dynamic viscosity of ternary hybrid nanofluid increased with enhancing solid particles’ volume concentration and temperature.

scholarly journals Energetic and Exergetic Assessment of the Cooling Efficiency of Automobile Radiator Using Mono and Hybrid Nanofluids

2021 ◽  
Vol 39 (4) ◽  
pp. 1321-1327
Author(s):  
Khalid Faisal Sultan ◽  
Hosham salim Anead ◽  
Ameer Abed Jaddoa
Keyword(s):  
Heat Transfer ◽  
Fluid Velocity ◽  
Exergy Efficiency ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Exergy Destruction ◽  
Current Form ◽  
Nano Fluid ◽  
Hybrid Nanofluids ◽  
Primary Form

In this paper, for two separate half-breed Nano liquids, Ag (25nm) + refined water and Ag (50nm) + Zn (50nm)-refined water tentatively considered at the vehicle radiator, the execution of restricted convection. Four distinct cross-breed Nano liquid concentrations in the range of 2-6 vol %. The increase of half breed nanoparticles into the refined water as a base liquid was organized by percentage. Within the range of 20 l/min-60 l /min, the coolant flow rate is altered. Inside the warm trade, Crossover Nano coolants show colossal change compared to the refined water. Ag-refined water cross breed Nano liquid's warm exchange execution was found to be much better than Ag + Zn-refined water half breed Nano coolant. In addition, with the rise in the concentration of half breed nanoparticle and half breed Nano fluid velocity, the Nusselt number is found to expand. In the advancement of the warm exchange rate, Mono and hybrid nanofluid forms play a very important role in enhancing the heat transfer and refrigeration of car radiators. With an increase in concentration of half-breed nanoparticles for the primary form about 44 percent warm exchange transition, expansion of 6 vol percent crossover nanoparticles were achieved with the rate of warm exchange. In comparison to the current form of cross breed nanoparticles, with an expansion of 6 percent vol concentration, 22 percent extended. The exergy in flow, exergy destruction and exergy efficiency of mono nanofluid (Ag +Dw) are greater than hybrid nanofluid (Ag + Zn + Dw) and distilled water. The exergy inflow, exergy destruction, and exergy efficiency as the concentration of nanoparticles increases for the two forms of mono and hybrid nanofluid. The values parameters of the mono nanofluid (Ag + Dw) such as exergy in flow, exergy destruction and exergy efficiency at 6 vol% were 572 W, 460 W, 72% respectively while in hybrid nanofluids (Ag + Zn + Dw) were 420W, 282W, 51%. The use of mono and hybrid nanofluid as a working fluid results in higher efficiency of heat transfer, which promotes the performance of the car engine and decreases fuel consumption.

scholarly journals Experimental Research on the Selective Absorption of Solar Energy by Hybrid Nanofluids

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8186
Author(s):  
Xin Jin ◽  
Guiping Lin ◽  
Haichuan Jin ◽  
Zunru Fu ◽  
Haoyang Sun
Keyword(s):  
Solar Energy ◽  
Low Cost ◽  
Clean Energy ◽  
Absorption Efficiency ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Selective Absorption ◽  
Solar Collectors ◽  
Direct Absorption ◽  
Hybrid Nanofluids

As low-cost, widely distributed and easily accessible renewable clean energy, solar energy has attracted more and more attention. Direct absorption solar collectors can convert solar energy into heat, but their efficiency is closely related to the absorption performance of the working fluid. In order to improve the absorption efficiency of direct absorption solar collectors, an experimental study on the selective absorption of solar energy by hybrid nanofluids was carried out. Five hybrid nanofluids were prepared and characterized, and the energy transfer advantages of hybrid nanofluid over single nanofluid were carefully studied. Experiments have found that the light-to-heat conversion properties of hybrid nanofluids show no obvious advantages or disadvantages compared with single nanofluid, and their performance is closely related to the types of nanoparticles. In addition, the hybrid nanofluid generally has two peaks, exactly the same as the single nanofluid in the mixed component, but the absorption curve is flatter than that of the single nanofluid. Further research of more types of hybrid nanofluids can provide new insights into the use of solar energy.

Sign in / Sign up

Export Citation Format

Share Document