scholarly journals Green Nanotechnology in the Formulation of a Novel Solid Dispersed Multilayered Core-Sheath Raloxifene-Loaded Nanofibrous Buccal Film; In Vitro and In Vivo Characterization

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 474
Author(s):  
Sara Nageeb El-Helaly ◽  
Eman Abd-Elrasheed ◽  
Samar A. Salim ◽  
Rania H. Fahmy ◽  
Salwa Salah ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Aqueous Solubility ◽  
Relative Bioavailability ◽  
Poly Vinyl Alcohol ◽  
Electrospinning Technique ◽  
Green Nanotechnology ◽  
In Vitro Characterization

Green nanotechnology utilizes the principles of green chemistry to formulate eco-friendly nanocarrier systems to mitigate patients and environment hazards. Raloxifene (RLX) demonstrates poor aqueous solubility (BCS class II) and low bioavailability, only 2% (extensive first-pass metabolism). The aim of this study is to enhance RLX solubility and bioavailability via development of novel solid dispersed multilayered core-sheath RLX-loaded nanofibers (RLX-NFs) without the involvement of organic solvents. A modified emulsion electrospinning technique was developed. Electrospinning of an RLX-nanoemulsion (RLX-NE) with polymer solution (poly vinyl alcohol (PVA), hydroxypropyl methylcellulose (HPMC), and chitosan (CS) in different volume ratios (1:9, 2:8, and 4:6) using D-optimal response surface methodology was adopted. In vitro characterization of RLX-loaded NFs was performed; scanning electron microscope (SEM), thermal analysis, drug content, release studies, and bioadhesion potential. The optimum NFs formula was evaluated for morphology using high-resolution transmission electron microscopy (HRTEM), and ex vivo drug permeation. The superiority of E2 (comprising RLX-NE and PVA (2:8)) over other NF formulae was statistically observed with respect to Q60 (56.048%), Q240 (94.612%), fiber size (594.678 nm), mucoadhesion time 24 h, flux (5.51 µg/cm2/h), and enhancement ratio (2.12). RLX pharmacokinetics parameters were evaluated in rabbits following buccal application of NF formula E2, relative to RLX oral dispersion. E2 showed significantly higher Cmax (53.18 ± 4.56 ng/mL), and relative bioavailability (≈2.29-fold).

scholarly journals Fabrication of Transgelosomes for Enhancing the Ocular Delivery of Acetazolamide: Statistical Optimization, In Vitro Characterization, and In Vivo Study

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 465 ◽  
Author(s):  
Eman A. Mazyed ◽  
Abdelaziz E. Abdelaziz
Keyword(s):  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Ocular Delivery ◽  
Ethanol Injection ◽  
In Vitro Characterization ◽  
Span 60 ◽  
In Vivo Characterization

Acetazolamide (ACZ) is a potent carbonic anhydrase inhibitor that is used for the treatment of glaucoma. Its oral administration causes various undesirable side effects. This study aimed to formulate transgelosomes (TGS) for enhancing the ocular delivery of ACZ. ACZ-loaded transfersomes were formulated by the ethanol injection method, using phosphatidylcholine (PC) and different edge activators, including Tween 80, Span 60, and Cremophor RH 40. The effects of the ratio of lipid to surfactant and type of surfactant on % drug released after 8 h (Q8h) and entrapment efficiency (EE%) were investigated by using Design-Expert software. The optimized formula was formulated as TGS, using poloxamers as gelling agents. In vitro and in vivo characterization of ACZ-loaded TGS was performed. According to optimization study, F8 had the highest desirability value and was chosen as the optimized formula for preparing TGS. F8 appeared as spherical elastic nanovesicles with Q8h of 93.01 ± 3.76% and EE% of 84.44 ± 2.82. Compared to a free drug, TGS exhibited more prolonged drug release of 71.28 ± 0.46% after 8 h, higher ex vivo permeation of 66.82 ± 1.11% after 8 h and a significant lowering of intraocular pressure (IOP) for 24 h. Therefore, TGS provided a promising technique for improving the corneal delivery of ACZ.

scholarly journals Quality by design (QbD) based fabrication of atazanavir loaded nanostructured lipid carriers for lymph targeting: Bioavailability enhancement using chylomicron flow block model and toxicity study

2021 ◽  
Author(s):  
Vishal Gurumukhi ◽  
Sanjaykumar Bari
Keyword(s):  
High Pressure ◽  
Quality By Design ◽  
Aqueous Solubility ◽  
Relative Bioavailability ◽  
Nanostructured Lipid Carriers ◽  
Block Model ◽  
Critical Material ◽  
Bioavailability Enhancement

Abstract Atazanavir (ATV) is widely used as anti-HIV agent with poor aqueous solubility which requires fabrication of novel drug delivery system to enhance therapeutic activity and safety. For this purpose, the quality by design (QbD) based ATV loaded nanostructured lipid carriers (NLCs) to address the challenges of bioavailability and its safety on oral administration. Herein, the main objective was to identify the influencing variables for the production of quality product. Considering this objective, quality target product profile (QTPP) was assigned and a systematic risk assessment study was performed to identify the critical material attributes (CMAs) and critical process parameter (CPP) having an influence on critical quality attributes (CQAs). Lipid concentrations, surfactant concentrations, and pressure of high-pressure homogenizer were identified as CMAs and CPP. ATV-NLCs were prepared by emulsification-high pressure homogenization method and further lyophilized to obtain solid-state NLCs. The effect of formulation variables (CMAs and CPP) on responses like particle size (Y1), polydispersity index (Y2), and zeta potential (Y3) was observed by central composite rotatable design (CCRD). The data were statistically evaluated by ANOVA for confirmation of a significant level (P<0.05). The optimal conditions of NLCs were obtained by generating design space and desirability value. The lyophilized ATV-NLCs were characterized by DSC, PXRD, and FT-IR analysis. The morphology of NLCs was revealed by TEM and FESEM. In vitro study suggested a sustained release pattern of drug (92.37±1.03 %) with a mechanism of Korsmeyer-Peppas model (r2 =0.925, and n=0.63). In vivo evaluation in Wistar rats showed significantly higher (p<0.001) plasma drug concentration of ATV-NLCs as compared to ATV-suspension using chylomicron flow block model. The relative bioavailability of ATV-NLCs was obtained to be 2.54 folds. Thus, a safe and promising drug targeting system was successfully developed to improve bioavailability and avoiding first-pass effect ensures to circumvent the acute-toxicity of liver.

scholarly journals Four ricin chain A-based immunotoxins directed against the common chronic lymphocytic leukemia antigen: in vitro characterization

Blood ◽  
1993 ◽  
Vol 82 (2) ◽  
pp. 536-543
Author(s):  
GB Faguet ◽  
JF Agee
Keyword(s):  
Chronic Lymphocytic Leukemia ◽  
T Lymphocytes ◽  
Ex Vivo ◽  
Lymphocytic Leukemia ◽  
Fab Fragment ◽  
In Vitro Characterization ◽  
The Common ◽  
Dose Dependent

The common B-chronic lymphocytic leukemia (B-CLL) antigen (cCLLa) appears to be ideal for targeted immunotherapy in that it is the most prevalent and disease-restricted marker in B-CLL. To assess this potential, we developed four immunotoxins (ITs) of anti-cCLLa monoclonal antibody CLL2m (an IgG2a kappa), using ricin chain A (RTA) or its deglycosylated derivative (dgA), each conjugated to either the whole IgG molecule or its Fab' fragment. Each IT was tested in vitro for specificity and cytotoxic activity (assessed by protein synthesis inhibition [PSI] and by cell kill [CK] in the clonogenic assay) against B-CLL cells. RTA-based anti-CD5 ITs and enriched normal B and T lymphocytes were used as controls. Each IT exhibited antigen-specific, dose-dependent activity. Thus, whereas B-CLL cells exhibited dose- dependent PSI and CK (whether the B-CLL clone was CD5+ or CD5-), normal B (cCLLa-/CD5-) and T lymphocytes (cCLLa-/CD5+) remained unaffected. IT potency was independent of toxin glycosylation, but was slightly influenced by antibody valence; divalent ITs were twice as potent as monovalent ITs (IC50, 2.3 v 7.1 x 10(-11) mol/L; CK, 2.6- v 2.0-log reached with 524 v 1,072 IT molecules bound/cell, respectively). In the presence of ammonium chloride or Verapamil, IT-induced CK was enhanced 10- to 80-fold. These data suggest that the cCLLa is a promising target for IT-based immunotherapy of B-CLL in vivo and ex vivo.

scholarly journals [68Ga]Ga-DFO-c(RGDyK): Synthesis and Evaluation of Its Potential for Tumor Imaging in Mice

2021 ◽  
Vol 22 (14) ◽  
pp. 7391
Author(s):  
Sona Krajcovicova ◽  
Andrea Daniskova ◽  
Katerina Bendova ◽  
Zbynek Novy ◽  
Miroslav Soural ◽  
...  
Keyword(s):  
Tumor Cell ◽  
Tumor Imaging ◽  
Ex Vivo ◽  
Cell Uptake ◽  
Αvβ3 Integrin ◽  
In Vitro Characterization ◽  
Positron Emission ◽  
Gallium 68

Angiogenesis has a pivotal role in tumor growth and the metastatic process. Molecular imaging was shown to be useful for imaging of tumor-induced angiogenesis. A great variety of radiolabeled peptides have been developed to target αvβ3 integrin, a target structure involved in the tumor-induced angiogenic process. The presented study aimed to synthesize deferoxamine (DFO)-based c(RGD) peptide conjugate for radiolabeling with gallium-68 and perform its basic preclinical characterization including testing of its tumor-imaging potential. DFO-c(RGDyK) was labeled with gallium-68 with high radiochemical purity. In vitro characterization including stability, partition coefficient, protein binding determination, tumor cell uptake assays, and ex vivo biodistribution as well as PET/CT imaging was performed. [68Ga]Ga-DFO-c(RGDyK) showed hydrophilic properties, high stability in PBS and human serum, and specific uptake in U-87 MG and M21 tumor cell lines in vitro and in vivo. We have shown here that [68Ga]Ga-DFO-c(RGDyK) can be used for αvβ3 integrin targeting, allowing imaging of tumor-induced angiogenesis by positron emission tomography.

scholarly journals Enhancement of Curcumin Anti-Inflammatory Effect via Formulation into Myrrh Oil-Based Nanoemulgel

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 577 ◽  
Author(s):  
Wafaa E. Soliman ◽  
Tamer M. Shehata ◽  
Maged E. Mohamed ◽  
Nancy S. Younis ◽  
Heba S. Elsewedy
Keyword(s):  
Ex Vivo ◽  
Skin Permeation ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Delivery Methods ◽  
Anti Cancer ◽  
Permeation Studies ◽  
Anti Inflammatory

Background: Curcumin (Cur) possesses a variety of beneficial pharmacological properties including antioxidant, antimicrobial, anti-cancer and anti-inflammatory activities. Nevertheless, the low aqueous solubility and subsequent poor bioavailability greatly limits its effectiveness. Besides, the role of myrrh oil as an essential oil in treating inflammatory disorders has been recently demonstrated. The objective of the current investigation is to enhance Cur efficacy via developing Cur nanoemulgel, which helps to improve its solubility and permeability, for transdermal delivery. Methods: The formulated preparations (Cur gel, emulgel and nanoemulgel) were evaluated for their physical appearance, spreadability, viscosity, particle size, in vitro release and ex vivo drug permeation studies. The in vivo anti-inflammatory activity was estimated using the carrageenan-induced rat hind paw edema method. Results: The formulated Cur-loaded preparations exhibited good physical characteristics that were in the acceptable range of transdermal preparations. The release of Cur from gel, emulgel and nanoemulgel after 12 h was 72.17 ± 3.76, 51.93 ± 3.81 and 62.0 ± 3.9%, respectively. Skin permeation of Cur was significantly (p < 0.05) improved when formulated into nanoemulgel since it showed the best steady state transdermal flux (SSTF) value (108.6 ± 3.8 µg/cm2·h) with the highest enhancement ratio (ER) (7.1 ± 0.2). In vivo anti-inflammatory studies proved that Cur-loaded nanoemulgel displayed the lowest percent of swelling (26.6% after 12 h). Conclusions: The obtained data confirmed the potential of the nanoemulgel dosage form and established the synergism of myrrh oil and Cur as an advanced anti-inflammatory drug.

scholarly journals Oxidized Alginate Dopamine Conjugate: In Vitro Characterization for Nose-to-Brain Delivery Application

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3495
Author(s):  
Adriana Trapani ◽  
Filomena Corbo ◽  
Gennaro Agrimi ◽  
Nicoletta Ditaranto ◽  
Nicola Cioffi ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Near Field ◽  
Neuroblastoma Cell ◽  
Fluorescein Isothiocyanate ◽  
Neuroblastoma Cell Line ◽  
In Vivo Studies ◽  
Brain Delivery ◽  
In Vitro Characterization

Background: The blood–brain barrier (BBB) bypass of dopamine (DA) is still a challenge for supplying it to the neurons of Substantia Nigra mainly affected by Parkinson disease. DA prodrugs have been studied to cross the BBB, overcoming the limitations of DA hydrophilicity. Therefore, the aim of this work is the synthesis and preliminary characterization of an oxidized alginate-dopamine (AlgOX-DA) conjugate conceived for DA nose-to-brain delivery. Methods: A Schiff base was designed to connect oxidized polymeric backbone to DA and both AlgOX and AlgOX-DA were characterized in terms of Raman, XPS, FT-IR, and 1H- NMR spectroscopies, as well as in vitro mucoadhesive and release tests. Results: Data demonstrated that AlgOX-DA was the most mucoadhesive material among the tested ones and it released the neurotransmitter in simulated nasal fluid and in low amounts in phosphate buffer saline. Results also demonstrated the capability of scanning near-field optical microscopy to study the structural and fluorescence properties of AlgOX, fluorescently labeled with fluorescein isothiocyanate microstructures. Interestingly, in SH-SY5Y neuroblastoma cell line up to 100 μg/mL, no toxic effect was derived from AlgOX and AlgOX-DA in 24 h. Conclusions: Overall, the in vitro performances of AlgOX and AlgOX-DA conjugates seem to encourage further ex vivo and in vivo studies in view of nose-to-brain administration.

scholarly journals FORMULATION AND OPTIMIZATION OF QUERCETIN LOADED NANOSPONGES TOPICAL GEL: EX VIVO, PHARMACODYNAMIC AND PHARMACOKINETIC STUDIES

2019 ◽  
pp. 156-165
Author(s):  
Y. SARAH SUJITHA ◽  
Y. INDIRA MUZIB
Keyword(s):  
Particle Size ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Diffusion Method ◽  
Pharmacokinetic Studies ◽  
Topical Gel

Objective: Quercetin is therapeutically hampered because of its poor solubility. The present investigation was aimed to prepare quercetin loaded nanosponges topical gel to enhance the solubility and efficacy of the drug. Methods: Quercetin nanosponges were prepared by emulsion solvent diffusion method. Developed nanosponges optimized by particle size, SEM, entrapment efficiency, FT-IR, DSC, P-XRD, In vitro studies. The optimized formulation of nanosponges was loaded into a topical gel and it was characterized by ex-vivo, in vivo Pharmacodynamic and kinetic studies. Results: The particle size and zeta potential of optimized nanosponges were found to be 188.3 nm and-0.1mV. Surface morphology was studied using SEM Analysis which showed tiny sponge-like structure and entrapment efficiency was found to be 96.5 %. In vitro drug release of optimized nanosponges was found to be 98.6% for 7hours. Optimized nanosponges entrapped gel was prepared by using carbopol 934 and hydroxypropyl methylcellulose as gelling agents. The prepared nanogels were homogenous and ex-vivo skin permeation studies of the optimized nanosponges gel was found to be 98.1% for 5 h, quercetin loaded nanosponges has shown higher skin permeation efficiency (18.4µg/cm2±2.1) compared to pure quercetin gel. The pharmacokinetic and pharmacodynamic studies showed that the quercetin loaded nanosponges has shown more effective when compared to marketed formulation. Conclusion: Quercetin loaded nanosponges gel has shown a significant increase in activity (p<0.05) compared to the marketed formulation (Voveran Emulgel).

Sign in / Sign up

Export Citation Format

Share Document