scholarly journals Synthesis of Linseed Oil-Based Waterborne Urethane Oil Wood Coatings

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1235 ◽  
Author(s):  
Chia-Wei Chang ◽  
Jing-Ping Chang ◽  
Kun-Tsung Lu
Keyword(s):  
Linseed Oil ◽  
Average Molecular Weight ◽  
Solid Content ◽  
Hexamethylene Diisocyanate ◽  
Molar Ratio ◽  
Pseudoplastic Fluid ◽  
Weakly Alkaline ◽  
Molar Ratios ◽  
Fluid Behavior ◽  
Wood Coatings

The linseed oil glyceride (LOG) was synthesized by using a transesterification process with a glycerol/linseed oil molar ratio of 1.0. The waterborne urethane oil (WUO) wood coating was prepared by acetone process. First, dimethylolpropionic acid was reacted with hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI), followed by adding LOG at various NCO/OH molars of 0.7, 0.8, and 0.9, respectively, and the COOH-containing prepolymer was obtained. Then, the ionomer which was prepared by neutralizing prepolymer with trimethylamine, was dispersed by adding deionized water, and the water–acetone dispersion was obtained. Finally, the acetone was removed by vacuum distillation. In the whole synthesized process, the LOG and COOH-containing prepolymer could be steadily synthesized by FTIR analysis, and the weight-average molecular weight and polydispersity of COOH-containing prepolymer increased with an increase of NCO/OH molar ratios. During the water dispersion process of the ionomer acetone solution, the point of phase inversion was prolonged, meaning the solid content decreased with an increase of NCO/OH molar ratios. After acetone was removed, the color of WUO was milky-white, and it was weakly alkaline and possessed a pseudoplastic fluid behavior. The particle size of WUO increased with increasing of NCO/OH molar ratios, however, the storage stability was extended for HDI and shortened for IPDI synthesized with increasing of NCO/OH molar ratios.

Synthesis and Properties of Biodegradable ABA Triblock Copolymers of Polylactide (A) and Polyethylene Glycol (B)

2006 ◽  
Vol 11-12 ◽  
pp. 469-472 ◽  
Author(s):  
Shu Xian Shi ◽  
Yu Zheng Xia ◽  
Xiao Yan Ma ◽  
Shu Ke Jiao ◽  
Xiao Yu Li
Keyword(s):  
Molecular Weight ◽  
Ethylene Glycol ◽  
Ring Opening ◽  
Average Molecular Weight ◽  
Analytical Techniques ◽  
Normal Pressure ◽  
Molar Ratio ◽  
Poly Ethylene Glycol ◽  
Molar Ratios ◽  
Poly Ethylene

The triblock ABA copolymers of poly (D,L-lactide)-b-poly (ethylene glycol)-b-poly (D,L-lactide) (PDLLA-PEG-PDLLA) were synthesized by bulk ring-opening polymerization in the presence of N2 under normal pressure, using the D,L-lactide (DLLA) as monomer, hydroxyl endgroups of poly(ethylene glycol) (PEG) as initiator and the stannous octoate as the catalyst. The resulting copolymers were characterized by various analytical techniques. Effects of molar ratios of lactide to PEG and the chain length of PEG on the viscosity-average molecular weight of the copolymers, the biodegradation behaviors and hydrophilicity of the copolymers were investigated in detail. The results showed that the viscosity-average molecular weight and the contact angle of the copolymers increased with the molar ratio of lactide to PEG, but water uptake and degradability decreased.

scholarly journals Syntheses and Characteristics of Urushiol-Based Waterborne UV-Cured Wood Coatings

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 4005
Author(s):  
Chia-Wei Chang ◽  
Jyun-Ya Liao ◽  
Kun-Tsung Lu
Keyword(s):  
Impact Resistance ◽  
Solid Content ◽  
Hexamethylene Diisocyanate ◽  
Ph Values ◽  
Wood Coatings ◽  
Lower Viscosity ◽  
Bending Resistance ◽  
Excellent Adhesion ◽  
Polyurethane Dispersions ◽  
The Eu

The manufacture and properties of waterborne UV-cured coatings (WUV coatings) by acetone process based on urushiol for wood finishing were investigated. Firstly, epoxide urushiol (EU) was prepared by reacting urushiol with epichlorohydrin. Secondly, the EU was reacted with acrylic acid to obtain acrylic epoxide urushiol (AEU). Next, the prepolymers were synthesized by the reaction of AEU, 2,2-Bis(hydroxymethyl)propionic acid (DMPA), and isophorone diisocyanate (IPDI) and hexamethylene diisocyanate (HDI), respectively, using acetone as a solvent. The prepolymers were further neutralized by triethylamine (TEA) to obtain ionomers and dispersed in the water. After removing the acetone by vacuum distillation, the polyurethane dispersions (PUDs) were obtained. Finally, the WUV coatings were performed by adding a photoinitiator (Irgacure 2959). The products in the synthesized processes and the properties of the WUV coatings were examined. The results showed that the EU, AEU, prepolymers, and ionomers could be synthesized stably. The PUDs synthesized by the IPDI and HDI had a similar solid content of 25.2% and 26.2%, and similar pH values of 7.8 and 7.6. However, the IPDI-containing PUD displayed lower viscosity, smaller particle size, and a more even polydispersity index. The IPDI-containing WUV film displayed a higher hardness, gloss, and lightfastness. The HDI-containing WUV film possessed superior impact resistance. Both IPDI-containing and HDI-containing WUV films showed excellent adhesion, bending resistance, and mass retention, and demonstrated a potential for wood finishing.

Metathesis Polymerization of Phenylacetylene by Tungsten Aryloxo Complexes

1995 ◽  
Vol 60 (3) ◽  
pp. 489-497 ◽  
Author(s):  
Hynek Balcar ◽  
Jan Sedláček ◽  
Marta Pacovská ◽  
Vratislav Blechta
Keyword(s):  
Molecular Weight ◽  
Catalytic Activity ◽  
Induction Period ◽  
Average Molecular Weight ◽  
Molar Fraction ◽  
Molar Ratio ◽  
Weight Average Molecular Weight ◽  
Polymer Yield ◽  
Positive Effect ◽  
Ligand Addition

Catalytic activity of the tungsten aryloxo complexes WCl5(OAr) and WOCl3(OAr), where Ar = 4-t-C4H9C6H4, 2,6-(t-C4H9)2C6H3, 2,6-Cl2C6H3, 2,4,6-Cl3C6H2, and 2,4,6-Br3C6H2 in polymerization of phenylacetylene (20 °C, monomer to catalyst molar ratio = 1 000) was studied. The activity of WCl5(OAr) as unicomponent catalysts increases with increasing electron withdrawing character of the -OAr ligand. Addition of two equivalents of organotin cocatalysts (Me4Sn, Bu4Sn, Ph4Sn, Bu3SnH) to WCl5(O-C6H2Cl3-2,4 ,6) has only slight positive effect (slightly higher polymer yield and/or molecular weight of poly(phenylacetylene)s was achieved). However, in the case of WOCl3(O-C6H3Cl2-2, 6) catalyst, it enhances the activity considerably by eliminating the induction period. Poly(phenylacetylene)s prepared with the catalysts studied have weight-average molecular weight ranging from 100 000 to 200 000. They are trans-prevailing and have relatively low molar fraction of monomer units comprised in cyclohexadiene sequences (about 6%).

scholarly journals Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 346
Author(s):  
Sonam Goyal ◽  
Maizatul Shima Shaharun ◽  
Ganaga Suriya Jayabal ◽  
Chong Fai Kait ◽  
Bawadi Abdullah ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalyst Support ◽  
Oxidation Potential ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Optimum Parameters ◽  
Reduction Of Co2 ◽  
Enhanced Yield

A set of novel photocatalysts, i.e., copper-zirconia imidazolate (CuZrIm) frameworks, were synthesized using different zirconia molar ratios (i.e., 0.5, 1, and 1.5 mmol). The photoreduction process of CO2 to methanol in a continuous-flow stirred photoreactor at pressure and temperature of 1 atm and 25 °C, respectively, was studied. The physicochemical properties of the synthesized catalysts were studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. The highest methanol activity of 818.59 µmol/L.g was recorded when the CuZrIm1 catalyst with Cu/Zr/Im/NH4OH molar ratio of 2:1:4:2 (mmol/mmol/mmol/M) was employed. The enhanced yield is attributed to the presence of Cu2+ oxidation state and the uniformly dispersed active metals. The response surface methodology (RSM) was used to optimize the reaction parameters. The predicted results agreed well with the experimental ones with the correlation coefficient (R2) of 0.99. The optimization results showed that the highest methanol activity of 1054 µmol/L.g was recorded when the optimum parameters were employed, i.e., stirring rate (540 rpm), intensity of light (275 W/m2) and photocatalyst loading (1.3 g/L). The redox potential value for the CuZrIm1 shows that the reduction potential is −1.70 V and the oxidation potential is +1.28 V for the photoreduction of CO2 to methanol. The current work has established the potential utilization of the imidazolate framework as catalyst support for the photoreduction of CO2 to methanol.

scholarly journals Lipozyme 435-Mediated Synthesis of Xylose Oleate in Methyl Ethyl Ketone

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3317
Author(s):  
Maria Carolina Pereira Gonçalves ◽  
Jéssica Cristina Amaral ◽  
Roberto Fernandez-Lafuente ◽  
Ruy de Sousa Junior ◽  
Paulo Waldir Tardioli
Keyword(s):  
Oleic Acid ◽  
Methyl Ethyl Ketone ◽  
Molar Ratio ◽  
Methyl Ethyl ◽  
Sugar Ester ◽  
Molar Ratios ◽  
Emulsion Capacity ◽  
Ping Pong ◽  
Commercial Sugar ◽  
Repeated Use

In this paper, we have performed the Lipozyme 435-catalyzed synthesis of xylose oleate in methyl ethyl ketone (MEK) from xylose and oleic acid. The effects of substrates’ molar ratios, reaction temperature, reaction time on esterification rates, and Lipozyme 435 reuse were studied. Results showed that an excess of oleic acid (xylose: oleic acid molar ratio of 1:5) significantly favored the reaction, yielding 98% of xylose conversion and 31% oleic acid conversion after 24 h-reaction (mainly to xylose mono- and dioleate, as confirmed by mass spectrometry). The highest Lipozyme 435 activities occurred between 55 and 70 °C. The predicted Ping Pong Bi Bi kinetic model fitted very well to the experimental data and there was no evidence of inhibitions in the range assessed. The reaction product was purified and presented an emulsion capacity close to that of a commercial sugar ester detergent. Finally, the repeated use of Lipozyme 435 showed a reduction in the reaction yields (by 48 and 19% in the xylose and oleic acid conversions, respectively), after ten 12 h-cycles.

Appearance, corrosion properties, and leach resistance of spruce and pine wood treated with Mea modified micronized copper preservative (MCu)

Holzforschung ◽  
2014 ◽  
Vol 68 (4) ◽  
pp. 477-486 ◽  
Author(s):  
Myung Jae Lee ◽  
Sedric Pankras ◽  
Paul Cooper
Keyword(s):  
Wood Species ◽  
Wood Preservative ◽  
Molar Ratio ◽  
Corrosion Properties ◽  
Pine Wood ◽  
Molar Ratios ◽  
Copper Leaching ◽  
Mold Resistance ◽  
Refractory Wood

Abstract Canadian refractory wood species treated with micronized copper (MCu) wood preservative become mottled and streaky in appearance. To overcome this issue, the MCu system was modified by adding small amounts of monoethanolamine (Mea). The modified systems were evaluated to clarify the role of Mea in terms of leaching, corrosion, and mold resistance of MCu systems. The mottled and streaky surface on treated spruce was prevented at Mea/Cu molar ratios between 0.7 and 1.5. Copper leaching remained modest and was only slightly higher than that of MCu alone up to a Mea/Cu molar ratio of 1.2. However, adding even a small amount of Mea to the MCu formulation increased fastener corrosion compared with MCu. Protonated Mea increased as more Mea was added and was identified as the main corrosion-causing electrolyte in the system.

Hydrogen-bonded bent-core blue phase liquid crystal complexes containing various molar ratios of proton acceptors and donors

RSC Advances ◽  
2016 ◽  
Vol 6 (38) ◽  
pp. 32319-32327 ◽  
Author(s):  
Chun-Chieh Han ◽  
Yu-Chaing Chou ◽  
San-Yuan Chen ◽  
Hong-Cheu Lin
Keyword(s):  
Liquid Crystal ◽  
Chain Length ◽  
Alkyl Chain ◽  
Alkyl Chain Length ◽  
Chiral Center ◽  
Molar Ratio ◽  
Core Complex ◽  
Molar Ratios ◽  
Phase Liquid ◽  
Blue Phase

The molar ratio, alkyl chain length, lateral fluoro-substitution and the chiral center of H-bonded bent-core supramolecules would affect the BP ranges of BPLC complexes. H-bonded bent-core complex PIIIC9/AIIF* (3/7 mol mol−1) displayed the widest BPI range of ΔTBPI = 12 °C.

scholarly journals BrO/SO<sub>2</sub> molar ratios from scanning DOAS measurements in the NOVAC network

2013 ◽  
Vol 5 (2) ◽  
pp. 1845-1870 ◽  
Author(s):  
P. Lübcke ◽  
N. Bobrowski ◽  
S. Arellano ◽  
B. Galle ◽  
G. Garzón ◽  
...  
Keyword(s):  
Molar Ratio ◽  
Optical Absorption Spectroscopy ◽  
Short Term ◽  
Dynamic Changes ◽  
Volcanic System ◽  
Molar Ratios ◽  
Remote Sensing Technique ◽  
Field Campaigns ◽  
Term Field

Abstract. The molar ratio of BrO to SO2 is, like other halogen/sulphur ratios, a~possible precursor for dynamic changes in the shallow part of a volcanic system. While the predictive significance of the BrO/SO2 ratio has not been well constrained yet, it has the major advantage that this ratio can be readily measured using the remote-sensing technique Differential Optical Absorption Spectroscopy (DOAS) in the UV. While BrO/SO2 ratios have been measured during several short-term field campaigns this article presents an algorithm that can be used to obtain long-term time series of BrO/SO2 ratios from the scanning DOAS instruments of the Network for Observation of Volcanic and Atmospheric Change (NOVAC) or comparable networks. Parameters of the DOAS retrieval of both trace gases are given and the influence of co-adding spectra on the retrieval error will be investigated. Difficulties in the evaluation of spectroscopic data from monitoring instruments in volcanic environments and possible solutions are discussed. The new algorithm is demonstrated by evaluating data from the NOVAC scanning DOAS systems at Nevado del Ruiz, Colombia encompassing almost four years of measurements between November 2009 and end of June 2013. This dataset shows variations of the BrO/SO2 ratio several weeks prior to the eruption on 30 June 2012.

Structural characteristics of tetanolysin and its binding to lipid vesicles

1982 ◽  
Vol 152 (2) ◽  
pp. 888-892
Author(s):  
S Rottem ◽  
R M Cole ◽  
W H Habig ◽  
M F Barile ◽  
M C Hardegree
Keyword(s):  
Structural Characteristics ◽  
Lipid Vesicles ◽  
Molar Ratio ◽  
Molar Ratios ◽  
High Concentrations

Tetanolysin binding to lipid vesicles was found to depend on the molar ratio of cholesterol to phospholipid, being low in vesicles containing up to 20 mol% cholesterol and high in vesicles containing more than 33 mol%. High concentrations of purified tetanolysin preparations formed arc- and ring-shaped structures. The structures were not readily detectable in diluted preparations unless incubated with lipid vesicles containing high molar ratios of cholesterol to phospholipid. It is suggested that the toxin is concentrated on the vesicles to local concentrations high enough to form the arcs and rings.

Sign in / Sign up

Export Citation Format

Share Document