weakly alkaline
Recently Published Documents


TOTAL DOCUMENTS

241
(FIVE YEARS 79)

H-INDEX

24
(FIVE YEARS 2)

2022 ◽  
Author(s):  
Shengfeng LIU ◽  
Bai Gao ◽  
Huanhuan Qin ◽  
Qin Ge ◽  
Huilan Ling ◽  
...  

Abstract Located in semi-arid regions of Hulun Buir League in China Inner Mongolia Autonomous Region, Hailar Basin is a region with less precipitation, where groundwater is the most important source for water supply. It is very important to study groundwater characteristics and hydrogeochemical processes for better management of the groundwater resource.The current status of fluorine (F), arsenic (As), and uranium (U) co-contamination exists in groundwater of the Hailar Basin, China. To understand the concentration mechanism of F, As, and U in groundwater in the study area, groundwater samples were collected for detection and analysis. The results showed that the main hydrochemical types were Cl-Na, HCO3-Na, and HCO3-Ca in the study area. The average values of F, As, and U were 3.94 mg/L, 0.04 mg/L, and 0.07 mg/L, respectively, which all exceeded the World Health Organization(WHO) guidelines. Through the Gibbs diagram and the end member diagram, it can be seen that the groundwater in the study area is mainly affected by the hydrogeochemical effects of evaporative crystallization, rock weathering mechanism, and the dissolution of silicate rock and evaporative salt rock minerals. Mineral dissolution, cation exchange, and weakly alkaline environment are important factors affecting F concentration; Low NO3ˉ and SO42- will cause a reducing environment and the competitive adsorption of HCO3ˉ will promote As pollution; The concentration of Ca2+,Mg2+, SO42-,and NO3ˉ have a great influence on the concentration of U.


2021 ◽  
Author(s):  
Hongying Yuan ◽  
Shuqing Yang ◽  
Bo Wang

Abstract Groundwater is an important resource of water in arid and semi-arid agricultural regions. This study considered the spatial differentiation of geographical features and the concentration of groundwater flow. The upstream of the Hetao Irrigation District Shenwu Irrigation Area (SWIA) and the downstream Wulate Irrigation Area (WLTIA) were selected as the study area, and a total of 85 groundwater samples (42 from SW and 43 from WLTIA) were collected. The aims of the study were to analyze the chemical composition and main control mechanisms of groundwater, and to evaluate the suitability of groundwater irrigation in the study area from the perspective of salt and alkali damage. Geological and environmental factors increase the spatial variability of groundwater chemical characteristics in the Hetao Irrigation District. In addition the groundwater of the study area is weakly alkaline, with the flow of groundwater; the solute content of downstream (WLTIA) is higher than that of upstream (SWIA); SWIA is mainly fresh water (47.62%); and WLTIA is mainly brackish water (65.12%). The main water chemistry types are Cl-Na type, Cl·SO-Ca· Mg type, Na+ and Cl− have obvious advantages in WLTIA, and they are the main contribution indicators of groundwater TDS in the study area. Rock weathering, ions exchange and evaporate crystallization are the main controlling factors for groundwater in the Hetao Irrigation District. Na+ mainly originates from the dissolution of evaporate salt rock and silicate rock, and Ca2+ from the dissolution of gypsum and carbonate. The order of contribution of different rocks is evaporation rock > silicate rock > carbonate rock, and the contribution rates of human activities and atmospheric input are small. The groundwater quality of the upstream SW is better than that of the downstream WLTIA. However, due to the high chemical ion concentration of the groundwater, most of the groundwater cannot be directly used for irrigation, which may cause salt and alkali damage. Therefore, when using groundwater irrigation, either drip irrigation or irrigation water aeration pretreatment can be used to avoid damages such as reduced soil permeability and compaction.


Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1330
Author(s):  
Chunlian Wang ◽  
Xiaocan Yu ◽  
Ruiqin Li ◽  
Lihong Liu ◽  
Kai Yan ◽  
...  

A large number of lithium–potassium-rich brines have been found in Paleocene reservoirs in the Jianghan Basin, South China. First, the brines have exceptionally high lithium and potassium contents that are even higher than those in other closed basins on the Tibetan Plateau. Second, the enriched brines are widely distributed in the center of the basin. The Mesozoic and Cenozoic igneous rocks in the Jiangling depression are mainly basalt and granite, and their distribution area exceeds 50% of the basin. The large basalt body provided a thermal source for the water–rock reaction. The igneous rocks in the study area could have provided ore-forming elements, such as lithium and potassium, for the brine. A static immersion experiment at room temperature shows that fluids with certain salinities are more likely to activate K ions in basalt. However, weakly alkaline solutions more easily dissolve K. High-temperature water–rock experiments show that the dissolution rates of Ca, Mg, and Sr decrease with increasing temperature, while the dissolution rates of K and Li first increase and then decrease with increasing temperature. The dissolution of K and Li is easier when saline fluid reacts with volcanic rock. The dissolution rate of K is higher than that of Li in basalt, and the dissolution rate of Li is higher than that of K in granite. Compared with the results at normal temperatures, the ability of the fluid to leach elements at higher temperatures is significantly enhanced. Temperature is the main factor controlling the ability of fluid to leach elements. High-salinity fluid is the main carrier of ore-forming elements. According to the water–rock experiments, the mineral composition of the ancient brine in the Jiangling depression that formed during the Paleocene is consistent with that of the ore-rich brine found today, but different by a few orders of magnitude, indicating that the formation of lithium–potassium-rich brines requires a long time. The water–rock reaction is one of the important processes of brine formation, and surface evaporation and concentration are the main mechanisms of brine mineralization.


Water ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 3345
Author(s):  
Zongjun Gao ◽  
Hui Tong ◽  
Qiao Su ◽  
Jiutan Liu ◽  
Fasheng Gao ◽  
...  

This study investigated the hydrochemical characteristics and formation mechanism of natural water in the southeastern Qinghai-Tibet Plateau. To this end, 19 groundwater samples were collected, tested, and analyzed using various methods, such as mathematical statistics, a Piper diagram, correlation analysis, Gibbs plots, and an ion ratio analysis. The results show that the dominant anions are HCO3− and SO42−, and the dominant cations are Ca2+ and Mg2+, which accounted for 98.50% and 85.94% of the total amount of anions and cations, respectively. The samples were weakly alkaline water, where the TDS (total dissolved solids) ranged from 28.00 mg/L to 242.00 mg/L, with an average value of 129.10 mg/L. The hydrochemical types were mainly Ca·Mg-HCO3·SO4—accounting for 42.10%. The hydrochemical evolution process was found to be mainly controlled by the weathering and dissolution of carbonate and silicate rocks. The main sources of Na+ and K+ are rock salt and silicate rocks, and those of Ca2+, Mg2+, HCO3−, and SO42− are from the dissolution of dolomite, calcite, gypsum, and other calcium and magnesium bearing minerals. In addition, atmospheric precipitation serves as a replenishment source of natural water in the region, and the recharge is affected by evaporation.


2021 ◽  
Vol 22 (21) ◽  
pp. 11916
Author(s):  
Vincenzo De Leo ◽  
Anna Maria Maurelli ◽  
Chiara Ingrosso ◽  
Fabio Lupone ◽  
Lucia Catucci

Mussel-inspired chemistry was usefully exploited here with the aim of developing a high-efficiency, environmentally friendly material for water remediation. A micro-structured material based on polydopamine (PDA) was obtained by using liposomes as templating agents and was used for the first time as an adsorbent material for the removal of methylene blue (MB) dye from aqueous solutions. Phospholipid liposomes were made by extrusion and coated with PDA by self-polymerization of dopamine under simple and mild conditions. The obtained Liposome@PDA microspheres were characterized by DLS and Zeta potential analysis, TEM microscopy, and FTIR spectroscopy. The effects of pH, temperature, MB concentration, amount of Liposome@PDA, and contact time on the adsorption process were investigated. Results showed that the highest adsorption capacity was obtained in weakly alkaline conditions (pH = 8.0) and that it could reach up to 395.4 mg g−1 at 298 K. In addition, adsorption kinetics showed that the adsorption behavior fits a pseudo-second-order kinetic model well. The equilibrium adsorption data, instead, were well described by Langmuir isotherm. Thermodynamic analysis demonstrated that the adsorption process was endothermic and spontaneous (ΔG0 = −12.55 kJ mol−1, ΔH0 = 13.37 kJ mol−1) in the investigated experimental conditions. Finally, the applicability of Liposome@PDA microspheres to model wastewater and the excellent reusability after regeneration by removing MB were demonstrated.


2021 ◽  
Vol 877 (1) ◽  
pp. 012013
Author(s):  
Inass Abdal Razaq Almallah ◽  
Fahad Al Najm ◽  
Zainb Ali Husain

Abstract Water injection by water flooding was used to enhance and increase oil production in Zubair oil field, southern Iraq. Physical-chemical and biological analysis of five water samples from different sources were collected to evaluate its compatibility with formation water using biological experiments and chemical compatibility simulation. The results show that injection water is classified weakly acidic-weakly alkaline and saline water, whereas surface water samples are considered weakly acid-weakly alkaline. The total dissolved solids results show brackish types accept for Formation water which classified weakly acid and Brine water. All the studied water samples contain bacteria colonies of Escherichia coli and Coliform expect for one sample, while Sulfate Reducing Bacteria was founded in all studied samples. Mathematical model of chemical compatibility between studied water samples and Zubair Formation water of the scale prediction model show that there are no needs for any inhibition treatments of all scales except for Geothite and Dolomite that should be treated before water injection. The biological compatibility experiments results show Formation damage about (61%) and (69%) in the studied core samples, while Bactria in water injection caused formation damage about (20%) and (51%).


Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 188
Author(s):  
Svetlana Bratskaya ◽  
Anna Skatova ◽  
Yuliya Privar ◽  
Andrey Boroda ◽  
Ekaterina Kantemirova ◽  
...  

Here, we discuss the applicability of (methylenebis(salicylaldehyde)—MbSA) for the fabrication of the stimuli-responsive N-carboxyethylchitosan (CEC) hydrogels with a tunable dissolution rate under physiological conditions. In comparison with non-covalent salicylimine hydrogels, MbSA cross-linking via covalent bis(‘imine clip’) and non-covalent hydrophobic interactions allowed the fabrication of hydrogels with storage moduli > 1 kPa at ten-fold lower aldehyde/CEC molar ratio with the preservation of pH- and amino-acid responsive behavior. Although MbSA-cross-linked CEC hydrogels were stable at neutral and weakly alkaline pH, their disassembly in cell growth medium (Dulbecco’s modified Eagle’s medium, DMEM) under physiological conditions was feasible due to transimination reaction with amino acids contained in DMEM. Depending on the cross-linking density, the complete dissolution time of the fabricated hydrogels varied from 28 h to 11 days. The cytotoxicity of MbSA cross-linked CEC hydrogels toward a human colon carcinoma cell line (HCT 116) and primary human dermal fibroblasts (HDF) was remarkably lower in comparison with CEC-salicylimine hydrogels. Fast gelation, relatively low cytotoxicity, and tunable stimuli-induced disassembly under physiological conditions make MbSA cross-linked CEC hydrogels promising for drug encapsulation and release, 3D printing, cell culturing, and other biomedical applications.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Kangni Chen ◽  
Yanbo Li ◽  
Jinyan Shang ◽  
Heping Li

AbstractBiothiols play important roles in various physiological and biological processes, which closely related to many diseases. Hydrazine is widely used in the chemical industry, but it is harmful to humans and animals. Therefore, it is very important to develop a fluorescent probe that can simultaneously detect biological thiols and hydrazine. In this work, a new fluorescent probe (2E,4Z)-2-(benzo[d]thiazol-2-yl)-5-chloro-5-(7-(diethylamino)-2-oxo-2H-chromen-3-yl)penta-2,4-dienenitrile (BCD) was synthesized by integrating coumarin and benzothiazole acetonitrile. Featured with four binding sites and different bonding mechanism between probe with biothiols and hydrazine, this probe exhibited fluorescent turn-on for distinguishing Cys, Hcy, GSH and hydrazine with 760-, 8-, 6- and 637-fold fluorescent intensity increase at 502, 479, 476 and 458 nm, respectively, through different excitation wavelengths. Research on the effect of pH on the fluorescent performance of BCD shows that the probe exhibits superior stability in a weakly alkaline to weakly acidic environment, which will facilitate the detection of biological thiols or hydrazine hydrate by BCD. Selectivity studies have shown that the probe has high specificity to biological thiols and hydrazine, which is of great significance to the application of BCD.


2021 ◽  
Vol 22 (21) ◽  
pp. 11590
Author(s):  
Evgenia Burilova ◽  
Alexander Solodov ◽  
Julia Shayimova ◽  
Julia Zhuravleva ◽  
Darya Shurtakova ◽  
...  

Through nuclear magnetic relaxation and pH-metry, the details of the complexation of gadolinium(III) ions with citric acid (H4L) in water and aqueous solutions of cationic polyelectrolytes are established. It is shown that the presence of poly(ethylene imine) (PEI) in solution affects magnetic relaxation behavior of gadolinium(III) complexes with citric acid (Cit) to a greater extent than polydiallyldimethylammonium chloride (PDDC). A large increase in relaxivity (up to 50 mM−1s−1) in the broad pH range (4–8) is revealed for the gadolinium(III)–citric acid–PEI system, which is particularly strong in the case of PEI with the molecular weight of 25 and 60 kDa. In weakly acidic medium (pH 3–7), the presence of PEI results in the formation of two tris-ligand associates [Gd(H2L)3]3− and [Gd(H2L)2(HL)]4−, which do not exist in aqueous medium. In weakly alkaline medium (pH 7–10), formation of ternary complexes Gd(III)–Cit–PEI with the Gd(III)–to–Cit ratio of 1:2 is evidenced. Using transmission electron microscopy (TEM) and dynamic light scattering techniques (DLS), the formation of the particles with the size of 50–100 nm possessing narrow molecular-mass distribution (PDI 0.08) is determined in the solution containing associate of PEI with tris-ligand complex [Gd(H2L)2(HL)]4−.


Sign in / Sign up

Export Citation Format

Share Document