scholarly journals Catalyst Speciation during ansa-Zirconocene-Catalyzed Polymerization of 1-Hexene Studied by UV-vis Spectroscopy—Formation and Partial Re-Activation of Zr-Allyl Intermediates †

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 936 ◽  
Author(s):  
Valentina N. Panchenko ◽  
Dmitrii E. Babushkin ◽  
John E. Bercaw ◽  
Hans H. Brintzinger
Keyword(s):  
Olefin Polymerization ◽  
The Other ◽  
Catalyst Precursor ◽  
Spectral Changes ◽  
Polymerization Catalysis ◽  
Pol I ◽  
Vis Spectroscopy ◽  
Catalytically Active ◽  
Kinetics Of ◽  
Catalyzed Polymerization

Catalyst speciation during polymerization of 1-hexene in benzene or toluene solutions of the catalyst precursor SBIZr(μ-Me)2AlMe2+ B(C6F5)4− (SBI = rac-dimethylsilyl-bis(1-indenyl)) at 23 °C is studied by following the accompanying UV-vis-spectral changes. These indicate that the onset of polymerization catalysis is associated with the concurrent formation of two distinct zirconocene species. One of these is proposed to consist of SBIZr-σ-polyhexenyl cations arising from SBIZr-Me+ (formed from SBIZr(μ-Me)2AlMe2+ by release of AlMe3) by repeated olefin insertions, while the other one is proposed to consist of SBIZr-η3-allyl cations of composition SBIZr-η3-(1-R-C3H4)+ (R = n-propyl), formed by σ-bond metathesis between SBIZr-Me+ and 1-hexene under release of methane. At later reaction stages, all zirconocene-σ–polymeryl cations appear to decay to yet another SBIZr-allyl species, i.e., to cations of the type SBIZr-η3-(x-R-(3-x)-pol-C3H3)+ (pol = i-polyhexenyl, x = 1 or 2). Renewed addition of excess 1-hexene is proposed to convert these sterically encumbered Zr-allyl cations back to catalytically active SBIZr-σ–polymeryl cations within a few seconds, presumably by initial 1-hexene insertion into the η1- isomer, followed by repeated additional insertions, while the initially formed, less crowded allyl cations, SBIZr-η3-(1-R-C3H4)+ appear to remain unchanged. Implications of these results with regard to the kinetics of zirconocene-catalyzed olefin polymerization are discussed.

Kinetics of oxidation of ammonia on cobalt catalyst I model of the reactor with catalytically active wall

1982 ◽  
Vol 47 (8) ◽  
pp. 2087-2096 ◽  
Author(s):  
Bohumil Bernauer ◽  
Antonín Šimeček ◽  
Jan Vosolsobě
Keyword(s):  
Parabolic Equations ◽  
Cobalt Catalyst ◽  
Nonlinear Parabolic Equations ◽  
Catalytic Reactions ◽  
Temperature Profiles ◽  
Dimensional Model ◽  
Kinetics Of Oxidation ◽  
Nonlinear Parabolic ◽  
Catalytically Active ◽  
Kinetics Of

A two dimensional model of a tabular reactor with the catalytically active wall has been proposed in which several exothermic catalytic reactions take place. The derived dimensionless equations enable evaluation of concentration and temperature profiles on the surface of the active component. The resulting nonlinear parabolic equations have been solved by the method of orthogonal collocations.

The Reactivity of Different Active Forms of Sodium Carbonate with Respect to Sulfur Dioxide

1992 ◽  
Vol 57 (11) ◽  
pp. 2302-2308
Author(s):  
Karel Mocek ◽  
Erich Lippert ◽  
Emerich Erdös
Keyword(s):  
Thermal Decomposition ◽  
Liquid Phase ◽  
Sulfur Dioxide ◽  
Specific Surface ◽  
Surface Area ◽  
Sodium Carbonate ◽  
Room Temperature ◽  
Active Form ◽  
The Other ◽  
Kinetics Of

The kinetics of the reaction of solid sodium carbonate with sulfur dioxide depends on the microstructure of the solid, which in turn is affected by the way and conditions of its preparation. The active form, analogous to that obtained by thermal decomposition of NaHCO3, emerges from the dehydration of Na2CO3 . 10 H2O in a vacuum or its weathering in air at room temperature. The two active forms are porous and have approximately the same specific surface area. Partial hydration of the active Na2CO3 in air at room temperature followed by thermal dehydration does not bring about a significant decrease in reactivity. On the other hand, if the preparation of anhydrous Na2CO3 involves, partly or completely, the liquid phase, the reactivity of the product is substantially lower.

On the kinetics of Hadamard-type fractional differential systems

2020 ◽  
Vol 23 (2) ◽  
pp. 553-570 ◽  
Author(s):  
Li Ma
Keyword(s):  
Differential Operator ◽  
Numerical Simulations ◽  
Type Inequality ◽  
The Other ◽  
Differential Systems ◽  
Fractional Differential Systems ◽  
Fractional Differential Operator ◽  
Fractional Differential ◽  
Kinetics Of ◽  
Theoretical Results

AbstractThis paper is devoted to the investigation of the kinetics of Hadamard-type fractional differential systems (HTFDSs) in two aspects. On one hand, the nonexistence of non-trivial periodic solutions for general HTFDSs, which are considered in some functional spaces, is proved and the corresponding eigenfunction of Hadamard-type fractional differential operator is also discussed. On the other hand, by the generalized Gronwall-type inequality, we estimate the bound of the Lyapunov exponents for HTFDSs. In addition, numerical simulations are addressed to verify the obtained theoretical results.

scholarly journals Controlling the Kinetics of an Enzymatic Reaction through Enzyme or Substrate Confinement into Lipid Mesophases with Tunable Structural Parameters

2020 ◽  
Vol 21 (14) ◽  
pp. 5116
Author(s):  
Marco Mendozza ◽  
Arianna Balestri ◽  
Costanza Montis ◽  
Debora Berti
Keyword(s):  
Reaction Kinetics ◽  
Self Assembly ◽  
Liquid Crystalline ◽  
Structural Parameters ◽  
Enzymatic Reaction ◽  
X Ray Scattering ◽  
Nitrophenyl Phosphate ◽  
Vis Spectroscopy ◽  
Kinetics Of ◽  
Enzyme Alkaline Phosphatase

Lipid liquid crystalline mesophases, resulting from the self-assembly of polymorphic lipids in water, have been widely explored as biocompatible drug delivery systems. In this respect, non-lamellar structures are particularly attractive: they are characterized by complex 3D architectures, with the coexistence of hydrophobic and hydrophilic regions that can conveniently host drugs of different polarities. The fine tunability of the structural parameters is nontrivial, but of paramount relevance, in order to control the diffusive properties of encapsulated active principles and, ultimately, their pharmacokinetics and release. In this work, we investigate the reaction kinetics of p-nitrophenyl phosphate conversion into p-nitrophenol, catalysed by the enzyme Alkaline Phosphatase, upon alternative confinement of the substrate and of the enzyme into liquid crystalline mesophases of phytantriol/H2O containing variable amounts of an additive, sucrose stearate, able to swell the mesophase. A structural investigation through Small-Angle X-ray Scattering, revealed the possibility to finely control the structure/size of the mesophases with the amount of the included additive. A UV–vis spectroscopy study highlighted that the enzymatic reaction kinetics could be controlled by tuning the structural parameters of the mesophase, opening new perspectives for the exploitation of non-lamellar mesophases for confinement and controlled release of therapeutics.

scholarly journals Characterization of the Two Mycobacterium tuberculosis recA Promoters

2003 ◽  
Vol 185 (20) ◽  
pp. 6005-6015 ◽  
Author(s):  
Krishna K. Gopaul ◽  
Patricia C. Brooks ◽  
Jean-François Prost ◽  
Elaine O. Davis
Keyword(s):  
Escherichia Coli ◽  
Dna Damage ◽  
Mycobacterium Tuberculosis ◽  
Promoter Activity ◽  
The Other ◽  
Expression Level ◽  
Promoter Elements ◽  
Kinetics Of

ABSTRACT The recA gene of Mycobacterium tuberculosis is unusual in that it is expressed from two promoters, one of which, P1, is DNA damage inducible independently of LexA and RecA, while the other, P2, is regulated by LexA in the classical way (E. O. Davis, B. Springer, K. K. Gopaul, K. G. Papavinasasundaram, P. Sander, and E. C. Böttger, Mol. Microbiol. 46:791-800, 2002). In this study we characterized these two promoters in more detail. Firstly, we localized the promoter elements for each of the promoters, and in so doing we identified a mutation in each promoter which eliminates promoter activity. Interestingly, a motif with similarity to Escherichia coli σ70 −35 elements but located much closer to the −10 element is important for optimal expression of P1, whereas the sequence at the −35 location is not. Secondly, we found that the sequences flanking the promoters can have a profound effect on the expression level directed by each of the promoters. Finally, we examined the contribution of each of the promoters to recA expression and compared their kinetics of induction following DNA damage.

scholarly journals Charging and coagulation of radioactive and nonradioactive particles in the atmosphere

2015 ◽  
Vol 15 (17) ◽  
pp. 23795-23840
Author(s):  
Y.-H. Kim ◽  
S. Yiacoumi ◽  
A. Nenes ◽  
C. Tsouris
Keyword(s):  
Atmospheric Particles ◽  
The Other ◽  
Urban Atmosphere ◽  
Balance Model ◽  
Charge Accumulation ◽  
Charge Balance ◽  
Charge Distributions ◽  
Coagulation Kinetics ◽  
Balance Charge ◽  
Kinetics Of

Abstract. Charging and coagulation influence one another and impact the particle charge and size distributions in the atmosphere. However, few investigations to date have focused on the coagulation kinetics of atmospheric particles accumulating charge. This study presents three approaches to include mutual effects of charging and coagulation on the microphysical evolution of atmospheric particles such as radioactive particles. The first approach employs ion balance, charge balance, and a bivariate population balance model (PBM) to comprehensively calculate both charge accumulation and coagulation rates of particles. The second approach involves a much simpler description of charging, and uses a monovariate PBM and subsequent effects of charge on particle coagulation. The third approach is further simplified assuming that particles instantaneously reach their steady-state charge distributions. It is found that compared to the other two approaches, the first approach can accurately predict time-dependent changes in the size and charge distributions of particles over a wide size range covering from the free molecule to continuum regimes. The other two approaches can reliably predict both charge accumulation and coagulation rates for particles larger than about 40 nm and atmospherically relevant conditions. These approaches are applied to investigate coagulation kinetics of particles accumulating charge in a radioactive neutralizer, the urban atmosphere, and a radioactive plume. Limitations of the approaches are discussed.

scholarly journals Determination of Dental Adhesive Composition throughout Solvent Drying and Polymerization Using ATR–FTIR Spectroscopy

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3886
Author(s):  
Arwa Almusa ◽  
António H.S. Delgado ◽  
Paul Ashley ◽  
Anne M. Young
Keyword(s):  
Light Exposure ◽  
Light Emitting Diode ◽  
Attenuated Total Reflectance ◽  
Drying Time ◽  
Light Emitting ◽  
Spectral Changes ◽  
One Step ◽  
Urethane Dimethacrylate ◽  
Kinetics Of

The of this study aim was to develop a rapid method to determine the chemical composition, solvent evaporation rates, and polymerization kinetics of dental adhesives. Single-component, acetone-containing adhesives One-Step (OS; Bisco, USA), Optibond Universal (OU; Kerr, USA), and G-Bond (GB; GC, Japan) were studied. Filler levels were determined gravimetrically. Monomers and solvents were quantified by comparing their pure Attenuated Total Reflectance-Fourier Transform Infra-Red (ATR–FTIR) spectra, summed in different ratios, with those of the adhesives. Spectral changes at 37 °C, throughout passive evaporation for 5 min, then polymerisation initiated by 20 s, and blue light emitting diode (LED) (600 mW/cm2) exposure (n = 3) were determined. Evaporation and polymerisation extent versus time and final changes were calculated using acetone (1360 cm−1) and methacrylate (1320 cm−1) peaks. OS, OU, and GB filler contents were 0, 9.6, and 5.3%. FTIR suggested OS and OU were Bis-GMA based, GB was urethane dimethacrylate (UDMA) based, and that each had a different diluent and acidic monomers and possible UDMA/acetone interactions. Furthermore, initial acetone percentages were all 40−50%. After 5 min drying, they were 0% for OS and OU but 10% for GB. Whilst OS had no water, that in OU declined from 18 to 10% and in GB from 25 to 20% upon drying. Evaporation extents were 50% of final levels at 23, 25, and 113 s for OS, OU, and GB, respectively. Polymerisation extents were all 50 and 80% of final levels before 10 and at 20 s of light exposure, respectively. Final monomer polymerisation levels were 68, 69, and 88% for OS, OU, and GB, respectively. An appreciation of initial and final adhesive chemistry is important for understanding the properties. The rates of evaporation and polymerisation provide indications of relative required drying and light cure times. UDMA/acetone interactions might explain the considerably greater drying time of GB.

scholarly journals Physical Properties and Non-Isothermal Crystallisation Kinetics of Primary Mechanically Recycled Poly(l-lactic acid) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3396
Author(s):  
Luboš Běhálek ◽  
Jan Novák ◽  
Pavel Brdlík ◽  
Martin Borůvka ◽  
Jiří Habr ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Physical Properties ◽  
Structural Changes ◽  
The Other ◽  
Half Time ◽  
Crystallisation Kinetics ◽  
Isothermal Crystallisation ◽  
Melt Crystallisation ◽  
Kinetics Of ◽  
Crystallisation Rate

The physical properties and non-isothermal melt- and cold-crystallisation kinetics of poly (l-lactic acid) (PLLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) biobased polymers reprocessed by mechanical milling of moulded specimens and followed injection moulding with up to seven recycling cycles are investigated. Non-isothermal crystallisation kinetics are evaluated by the half-time of crystallisation and a procedure based on the mathematical treatment of DSC cumulative crystallisation curves at their inflection point (Kratochvil-Kelnar method). Thermomechanical recycling of PLLA raised structural changes that resulted in an increase in melt flow properties by up to six times, a decrease in the thermal stability by up to 80 °C, a reduction in the melt half-time crystallisation by up to about 40%, an increase in the melt crystallisation start temperature, and an increase in the maximum melt crystallisation rate (up to 2.7 times). Furthermore, reprocessing after the first recycling cycle caused the elimination of cold crystallisation when cooling at a slow rate. These structural changes also lowered the cold crystallisation temperature without impacting the maximum cold crystallisation rate. The structural changes of reprocessed PHBV had no significant effect on the non-isothermal crystallisation kinetics of this material. Additionally, the thermomechanical behaviour of reprocessed PHBV indicates that the technological waste of this biopolymer is suitable for recycling as a reusable additive to the virgin polymer matrix. In the case of reprocessed PLLA, on the other hand, a significant decrease in tensile and flexural strength (by 22% and 46%, respectively) was detected, which reflected changes within the biobased polymer structure. Apart from the elastic modulus, all the other thermomechanical properties of PLLA dropped down with an increasing level of recycling.

Reactions of hydrogen atoms with hexafluoroacetone

1978 ◽  
Vol 56 (20) ◽  
pp. 2638-2645 ◽  
Author(s):  
D. W. Grattan ◽  
K. O. Kutschke
Keyword(s):  
Rate Constant ◽  
Cross Sections ◽  
The Other ◽  
Hydrogen Atoms ◽  
Kinetics Of

Attempts were made to study the kinetics of the reaction of atomic H with (CF3)2CO vapour (HFA). Atomic H was generated from H2 by mercury photosensitization in the presence of C2H4 and HFA but the system was complicated by the loss of C2H5 radicals by addition to HFA and the kinetic results were intractable. When atomic H was generated from C3H8, the kinetics again were obscured by some unidentified reaction(s) which became more important at higher [HFA]/[C3H8]. An estimate of the rate constant for the addition of H to HFA obtained at low [HFA]/[C3H8] yielded k9 = 8.5 × 105 l mol−1 s−1. Trifluoroacetaldehyde was identified with some reliability but many of the other heavier products formed in the H2 + HFA reaction could not be identified. Quenching cross-sections were determined for C2H4, C3H8, C4H10, and HFA relative to that for N2O.

Sign in / Sign up

Export Citation Format

Share Document