scholarly journals Comparative Study of Triboelectric Nanogenerators with Differently Woven Cotton Textiles for Wearable Electronics

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1443 ◽  
Author(s):  
Jaebum Jeong ◽  
Jin-Hyuk Kwon ◽  
Kyungmin Lim ◽  
Swarup Biswas ◽  
Alexandra Tibaldi ◽  
...  
Keyword(s):  
Comparative Study ◽  
Cotton Fiber ◽  
Output Voltage ◽  
Electrical Performance ◽  
Cotton Fibers ◽  
Wearable Electronics ◽  
Charge Generation ◽  
Cotton Textiles ◽  
The Difference ◽  
Triboelectric Nanogenerators

A comparative study of the electrical performance of triboelectric nanogenerators (TENGs) with plain- and 2/1 twill-woven cotton textiles was conducted. Furthermore, the microstructures of the cotton fiber surfaces were examined to understand the fundamental mechanical interaction among the cotton fibers in the TENGs. The TENG with 2/1 twill-woven cotton textiles exhibited higher output voltages compared to that with plain-woven cotton textiles. The difference in the output voltage between the two types of TENGs resulted from the difference in triboelectric charge generation between the constituent cotton textiles. The higher output voltage of the TENG with 2/1 twill-woven cotton textiles was attributed to the higher density in triboelectric interactions among the cotton fiber molecules.

Improved Output Voltage of a Nanogenerator with 3D Fabric

2020 ◽  
Vol 20 (8) ◽  
pp. 4666-4670
Author(s):  
Do-Kyung Kim ◽  
Jae Bum Jeong ◽  
Kyungmin Lim ◽  
Jaehoon Ko ◽  
Philippe Lang ◽  
...  
Keyword(s):  
Active Layer ◽  
Output Voltage ◽  
High Surface ◽  
3D Structure ◽  
Wearable Electronics ◽  
Triboelectric Nanogenerators ◽  
High Output Voltage ◽  
Electrically Enhanced ◽  
Triboelectric Effect ◽  
High Output

Electrically enhanced triboelectric nanogenerators (TENGs) using 3D fabrics and polydimethylsiloxane (PDMS) are suggested for next-generation wearable electronics. TENGs with fabric–fabric– fabric (FFF) and PDMS–fabric–PDMS (PFP) structures were fabricated with ordinary 2D fabrics and honeycomb-like 3D fabrics. A 3D fabric TENG with an FFF structure showed an output voltage of 7 V, 7 times higher than a 2D fabric FFF structured TENG. Interestingly, an extremely high output voltage of 240 V was achieved by a 3D fabric PFP structured TENG. This was attributed to the high surface frictional triboelectric effect between fabric and PDMS and also marginal 3D structure in the 3D fabric active layer.

Comparative Study of Gardenia Yellow Dye Adsorption on Cotton Fiber Surface with Reactive and Non-Reactive Modification

2012 ◽  
Vol 441 ◽  
pp. 212-216
Author(s):  
Li Qin Chai ◽  
Jian Zhong Shao ◽  
Lan Zhou
Keyword(s):  
Surface Modification ◽  
Zeta Potential ◽  
Comparative Study ◽  
Cotton Fiber ◽  
Positive Charge ◽  
Dye Adsorption ◽  
Fiber Surface ◽  
Cotton Fibers ◽  
Adsorption Studies ◽  
Reactive Modification

Biquaternary ammonium salt CY and cationic surfactant DAB were investigated as pretreating agents for surface modification of cotton fibers. The measurement of zeta potential was used to indicate the effectiveness of the pretreatment. It was found that CY and DAB both largely enhanced the positive charge on cotton fibers following an increase in the pH. Adsorption studies of gardenia yellow dye on these pretreated cotton fibers showed that both CY and DAB enhance adsorption capacity of gardenia yellow dye on cotton fibers. The zeta potential results and adsorption studies revealed that the uptake of gardenia yellow dye on treated cotton fibers occurs via electrostatic attractions between the anion of the dye and cationic segments of the treated cotton fibers. The washing fastness and crocking fastness of the dyeings were improved after the pretreatments.

Comparative Study of Size, Total Protein, Fibrinogen and 5-HT Content of Human and Canine Platelet Density Subpopulations

1986 ◽  
Vol 56 (03) ◽  
pp. 288-292 ◽  
Author(s):  
Diego Mezzano ◽  
Eduardo Aranda ◽  
Arnaldo Foradori
Keyword(s):  
Comparative Study ◽  
Protein Content ◽  
Cell Density ◽  
Total Protein ◽  
Unit Volume ◽  
Low Density ◽  
Dense Bodies ◽  
Artifactual Changes ◽  
Platelet Release ◽  
The Difference

SummaryThe size, total protein, fibrinogen and 5-HT content were evaluated in density subpopulations of human and canine platelets fractionated in linear arabinogalactan gradients. The methodology was assessed to ascertain that platelet separation was by density and to discard artifactual changes and platelet release during the procedure. EDTA or PGEi increased the size of human PRP-platelets, but not of dog platelets. In humans, high density (HD) platelets were 1.26 times larger and contained 1.88 times more fibrinogen, 2.23 times more 5-HT and 1.37 times more protein than low density (LD) platelets; in dogs, these density cohorts did not differ in protein content, but LD platelets were 1.29 times larger and had 1.33 times more fibrinogen and 5-HT than HD platelets. These findings suggest that cell density is mostly dependent on the protein content per unit volume of platelets (and not on dense bodies). The differences in fibrinogen and 5-HT content between HD and LD cohorts in humans and dogs may be related to platelet age. The difference in volume between HD and LD platelets in dogs is of uncertain interpretation.

Pandhawa Gubah sebagai Representasi Interaksi Metafisik Manusia Jawa dan Perbandingannya dengan Cheritera Pandawa Lima

Manuskripta ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 67
Author(s):  
Novarina Novarina
Keyword(s):  
Comparative Study ◽  
Literary Theory ◽  
Research Method ◽  
Descriptive Analysis ◽  
Literary Study ◽  
Analysis Method ◽  
Research Objects ◽  
Similarities And Differences ◽  
The Difference ◽  
The Comparative Study

Abstract: This research is a comparative literary study that uses Malay and Javanese versions of Mahabarata text sources. The research objects used were the text edition of Pandhawa Gubah (PG) by Sudibjo Z. Hadisutjipto and the text of Cheritera Pandawa Lima (CPL) by Khalid Hussain. The research method used is descriptive-analysis method. In the comparative study used a comparative literary theory proposed by Endraswara (2011). The results of the text comparison reveal the similarities and differences in the image of Bima figures in the Javanese and Malay versions. The equation as a whole is that both texts contain the same heroic storyline and heroic character, Bima. In addition, Indian influence is still evident in the two texts seen from the nuances of Hinduism that exist in both texts. While the difference is seen in the events that accompany Bima's struggle in achieving his victory. Based on these similarities and differences, it can be seen that the authors attempt to represent the concept of metaphysical interactions vertically and horizontally expressed through PG text. --- Abstrak: Penelitian ini adalah satu kajian sastra bandingan yang menggunakan sumber teks Mahabarata versi Melayu dan Jawa. Objek penelitian yang digunakan adalah edisi teks Pandhawa Gubah (PG) karya Sudibjo Z. Hadisutjipto dan teks Cheritera Pandawa Lima (CPL) karya Khalid Hussain. Metode penelitian yang digunakan adalah metode deskriptif-analisis. Dalam telaah perbandingan digunakan teori sastra bandingan yang dikemukakan Endraswara (2011). Hasil perbandingan teks mengungkapkan adanya persamaan dan perbedaan citra tokoh Bima dalam versi Jawa maupun versi Melayu. Persamaan secara keseluruhan adalah kedua teks tersebut mengandung alur cerita kepahlawanan dan tokoh pahlawan yang sama yaitu Bima. Selain itu, pengaruh India masih tampak dalam kedua teks tersebut dilihat dari nuansa Hinduisme yang ada dalam kedua teks. Sementara perbedaannya tampak pada peristiwa-peristiwa yang menyertai perjuangan Bima dalam mencapai kemenangannya. Berdasarkan persamaan dan perbedaan tersebut tampak adanya upaya penulis untuk merepresentasikan konsep interaksi metafisik secara vertikal dan horizontal yang diungkapkan melalui teks PG.

Being Mother:Comparative Study of the Contested Motherhood between South Korea and Indonesia

2018 ◽  
Vol 1 (1) ◽  
pp. 22
Author(s):  
Desintha Asriani
Keyword(s):  
Political Economy ◽  
South Korea ◽  
Comparative Study ◽  
Cultural Issues ◽  
Family Routine ◽  
The Difference

This paper attempts to explain the discourse of motherhood in both South Korea and Indonesia. It is based on the interesting dynamic of being mother that is much influenced by the interrelated actions played by number of dominant actors around woman itself. By using a comparative study, it is found that the map or the trace of political economy in terms of developmental agenda, in fact drives the difference flows in shaping the notion of motherhood. In Indonesia, for being mother, women exist in the intersection of state intention, industrialization and culture pressure. Indonesian motherhood is interestingly in line with another analysis, such in their relation with housemaids. Meanwhile, in South Korea, the description of motherhood occurs in the middle of nationalism spirit, competition, ambience and family routine. Hence, this study concludes that being mother is highly contested and closely associated with the endless structural and cultural issues.

The Tensile Property of the SPF/Cotton Blended Yarn

2011 ◽  
Vol 321 ◽  
pp. 192-195
Author(s):  
Qing Bin Yang ◽  
Xiao Yang
Keyword(s):  
Experimental Data ◽  
Simple Model ◽  
Tensile Property ◽  
Cotton Fibers ◽  
Blended Yarn ◽  
The Difference ◽  
The Relationship

In order to analysis the relationship between the strength and elongation and the blended ratio of SPF/Cotton blended yarn, the strength and elongation of SPF /cotton blended yarn with different blended ratio were measured and compared with the simple model. The results indicated that For the SPF/cotton blended yarn, the difference between the experimental data and the model value is remarkable because of the high cohesion of the cotton fibers.

Source of Metal Ions on Raw Cotton Fibers and their Influence on Dyeing

2021 ◽  
Vol 8 (2) ◽  
pp. 1-8
Author(s):  
Chanel Angelique Fortier ◽  
Christopher Delhom ◽  
Michael K. Dowd
Keyword(s):  
Metal Ions ◽  
Cotton Fiber ◽  
Metal Content ◽  
Fiber Development ◽  
Cultivar Differences ◽  
Cotton Fibers ◽  
Dye Uptake ◽  
Metal Levels ◽  
Fiber Metal ◽  
Cotton Bolls

This work reports on two debated points related to the metal content of cotton fiber and its influence on processing. The first issue is if the metal levels of raw fibers are naturally deposited during fiber development or if the levels are influenced by weathering and harvesting conditions present after boll opening. This was tested by harvesting bolls just as they were opening and after the opened bolls were allowed to field age. The second issue relates to the importance of metal levels on fiber dyeability. Results indicate that the metal levels of newly-opened cotton were not appreciably different from those of aged cotton bolls and that the fiber metal levels after scouring and bleaching had little correlation with dye uptake. Additionally, some metal levels exceeded those previously reported and the environment appeared to have a stronger influence on fiber Ca and Mg levels than did cultivar differences.

Sign in / Sign up

Export Citation Format

Share Document