scholarly journals Influence of Dimethacrylate Monomer on the Polymerization Efficacy of Resin-Based Dental Cements—FTIR Analysis

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 247
Author(s):  
Aleksandra Maletin ◽  
Ivan Ristic ◽  
Tanja Veljovic ◽  
Bojana Ramic ◽  
Tatjana Puskar ◽  
...  
Keyword(s):  
Spectral Analysis ◽  
Clinical Practice ◽  
Chemical Structure ◽  
Cementitious Materials ◽  
Degree Of Polymerization ◽  
Cementitious Material ◽  
Ftir Analysis ◽  
Dental Cement ◽  
Polymerization Mechanism ◽  
The Difference

The degree of polymerization for dimethacrylate resin-based materials (BisGMA, TEGDMA, UDMA, HEMA) ranges from 55 to 75%. Literature data indicate that polymerization efficacy depends, among other factors, on the type of methacrylate resin comprising the material. The aim of this study was to evaluate the polymerization efficacy of four dental cement materials characterized by different polymerization mechanisms using FTIR analysis. In the present study, the FTIR method was adopted to analyze the degree of polymerization efficacy of four resin-based dental cement materials, two of which were self-cured and two were dual-cured cements. The IR spectral analysis was performed 24 h after the polymerization of the cementitious material. RelyX ARC cement exhibits the lowest polymerization efficacy (61.3%), while that of Variolink II (85.8%) and Maxcem Elite is the highest (90.1%). Although the efficacy of self-cured cements appears to be superior, the difference is not statistically significant (p = 0.280). Polymerization efficacy largely depends on the chemical structure of the material in terms of the presence of a particular methacrylate resin and less on the polymerization mechanism itself, i.e., whether it is a self-cured or dually cured dental cement. Thus, in clinical practice, cementitious materials with a higher proportion of TEGDMA compared with BisGMA are recommended.

scholarly journals Research on C30 Concrete Mix Proportion in Guangdong Province

2020 ◽  
Vol 213 ◽  
pp. 02039
Author(s):  
Guangxing Lai ◽  
Jianli Yin ◽  
Junhui Ye ◽  
Yujia Chen ◽  
Wei Xiao
Keyword(s):  
Guangdong Province ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
Bleeding Rate ◽  
Slag Powder ◽  
Mix Proportion ◽  
Concrete Mix ◽  
Water Test ◽  
The Difference ◽  
Bleeding Water

The reasons of C30 concrete bleeding in winter in Guangdong province were studied by collecting the concrete mix proportions of C30 concrete mixing plants in Guangdong, Fujian, Henan, Hunan, Chongqing and Shaanxi regions, the difference between the concrete mix proportions in Guangdong and other regions was investigated. Based on the representative concrete mix proportion in Guangdong province, the concrete bleeding water test was carried out, and the correlation between the amount of different cementing materials and the bleeding rate was investigated. The results showed that compared with other regions, the C30 concrete mix proportion in Guangdong has the lowest total cementitious material, which made it more prone to bleeding. The amount of slag powder and the total amount of cementitious materials have a high correlation with the bleeding rate. With the increase of the amount of slag powder and the total amount of cementitious materials, the bleeding rate decreases.

GAGs-Potentiated Inhibition of Thrombin, Factor Xa and Plasmin in Plasma and in a Purified System Containing Antithrombin III – Correlation with Total Charge Density

1981 ◽  
Vol 46 (04) ◽  
pp. 749-751 ◽  
Author(s):  
E Cofrancesco ◽  
A Vigo ◽  
E M Pogliani
Keyword(s):  
Charge Density ◽  
Chemical Structure ◽  
Antithrombin Iii ◽  
Factor Xa ◽  
Total Charge ◽  
Pure System ◽  
At Iii ◽  
Total Charge Density ◽  
The Difference ◽  
Inhibition Of Thrombin

SummaryThe ability of heparin and related glycosaminoglycans (GAGs) to accelerate the inhibition of thrombin, factor Xa and plasmin in plasma and in a purified system containing antithrombin III (At III) was studied using chromogenic peptide substrate assaysThere was a good correlation between the charge density of the mucopolysaccharides and the activities investigated. While the difference between potentiation of the antithrombin activity by GAGs in plasma and in the purified system was slight, the inhibition of factor Xa in plasma was more pronounced than in the presence of purified At III, indicating the mechanisms for GAGs-potentiated inhibition of thrombin and factor Xa are not identical.For the antiplasmin activity, there was a good correlation between the chemical structure and biological activity only in the pure system, confirming that the antithrombin-GAG complex plays a very limited role in the inactivation of plasmin in plasma.

Klein with Lacan: A Study on the Reception of Lacanian Ideas in Uruguay and Its Effects on Clinical Practices (1955–82)

2020 ◽  
Vol 22 (3) ◽  
pp. 341-361
Author(s):  
Gonzalo Grau-Pérez ◽  
J. Guillermo Milán
Keyword(s):  
Clinical Practice ◽  
Clinical Material ◽  
Clinical Practices ◽  
Before And After ◽  
The Difference ◽  
The 1960S ◽  
The Relationship ◽  
Discursive Approach ◽  
The Way ◽  
Clinical Cases

In Uruguay, Lacanian ideas arrived in the 1960s, into a context of Kleinian hegemony. Adopting a discursive approach, this study researched the initial reception of these ideas and its effects on clinical practices. We gathered a corpus of discursive data from clinical cases and theoretical-doctrinal articles (from the 1960s, 1970s and 1980s). In order to examine the effects of Lacanian ideas, we analysed the difference in the way of interpreting the clinical material before and after Lacan's reception. The results of this research illuminate some epistemological problems of psychoanalysis, especially the relationship between theory and clinical practice.

Theory-Practice Gap: The Experiences of Nigerian Nursing Students

2018 ◽  
Vol 20 (1) ◽  
Author(s):  
Titilayo Dorothy Odetola ◽  
Olusola Oluwasola ◽  
Christoph Pimmer ◽  
Oluwafemi Dipeolu ◽  
Samson Oluwayemi Akande ◽  
...  
Keyword(s):  
Clinical Practice ◽  
Nursing Students ◽  
Developing Country ◽  
The Body ◽  
Clinical Staff ◽  
Clinical Settings ◽  
Practice Gap ◽  
The Difference ◽  
Analyse Data ◽  
Theory Practice Gap

The “disconnect” between the body of knowledge acquired in classroom settings and the application of this knowledge in clinical practice is one of the main reasons for professional fear, anxiety and feelings of incompetence among freshly graduated nurses. While the phenomenon of the theory-to-practice gap has been researched quite extensively in high-income country settings much less is known about nursing students’ experiences in a developing country context. To rectify this shortcoming, the qualitative study investigated the experiences of nursing students in their attempt to apply what they learn in classrooms in clinical learning contexts in seven sites in Nigeria. Thematic content analysis was used to analyse data gained from eight focus group discussions (n = 80) with the students. The findings reveal a multifaceted theory-practice gap which plays out along four tensions: (1) procedural, i.e. the difference between practices from education institutions and the ones enacted in clinical wards – and contradictions that emerge even within one clinical setting; (2) political, i.e. conflicts that arise between students and clinical staff, especially personnel with a lower qualification profile than the degree that students pursue; (3) material, i.e. the disconnect between contemporary instruments and equipment available in schools and the lack thereof in clinical settings; and (4) temporal, i.e. restricted opportunities for supervised practice owing to time constraints in clinical settings in which education tends to be undervalued. Many of these aspects are linked to and aggravated by infrastructural limitations, which are typical for the setting of a developing country. Nursing students need to be prepared regarding how to deal with the identified procedural, political, material and temporal tensions before and while being immersed in clinical practice, and, in so doing, they need to be supported by educationally better qualified clinical staff.

Degree of Conversion of Light Cured Resin Cements Polymerized under Two Thicknesses of Different Lithium Silicate Ceramics

2020 ◽  
Author(s):  
Mohamed Abdel Rahman Maraghy
Keyword(s):  
Degree Of Polymerization ◽  
Resin Cement ◽  
Lithium Silicate ◽  
Resin Cements ◽  
Ceramic Disc ◽  
Ceramic Disk ◽  
The Difference ◽  
Light Cure Unit ◽  
Glass Slab ◽  
Finger Pressure

Objective: To show the consequence of two thicknesses of ceramic on the polymerization of resin cement light cured when three different lithium silicate ceramics were used. Materials and Methods: 42 ceramic slices were prepared from three types of ceramics, Emax CAD, Celtra Duo CAD and Vita suprinity CAD (n=14). They were further divided into two subgroups according to thicknesses into sub group thickness 0.5mm and sub group thickness 1mm (n=7). Teflon moulds were fabricated with specific dimensions, where the ceramic disc was placed followed by light cured resin cement Bisco choice 2 veneer and a glass slab with finger pressure applied. Curing with Ascent® PX LED light cure unit for 20 seconds took place, where the tip placed over the ceramic sample directly. Cement film was then separated from the ceramic disk and subjected to analysis by Fourier Transform Infrared Spectroscope. Uncured cement samples were also subjected to analysis. Results: Celtra DUO CAD ceramic showed higher degree of polymerization that of Emax and Vita suprinity while the difference between Emax and Suprinity on the degree of polymerization was not significant. Also, ceramic thicknesses had a significant effect on the degree of polymerization of the resin cement. Conclusion: Thickness of ceramics up to 1mm affects the polymerization of resin cement significantly.

scholarly journals Effects of Amino Acid Side-Chain Length and Chemical Structure on Anionic Polyglutamic and Polyaspartic Acid Cellulose-Based Polyelectrolyte Brushes

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1789
Author(s):  
Dmitry Tolmachev ◽  
George Mamistvalov ◽  
Natalia Lukasheva ◽  
Sergey Larin ◽  
Mikko Karttunen
Keyword(s):  
Glutamic Acid ◽  
Chain Length ◽  
Chemical Structure ◽  
Side Chain ◽  
Side Chains ◽  
Side Chain Length ◽  
Polyelectrolyte Brushes ◽  
Grafting Density ◽  
The Difference ◽  
Cellulose Surface

We used atomistic molecular dynamics (MD) simulations to study polyelectrolyte brushes based on anionic α,L-glutamic acid and α,L-aspartic acid grafted on cellulose in the presence of divalent CaCl2 salt at different concentrations. The motivation is to search for ways to control properties such as sorption capacity and the structural response of the brush to multivalent salts. For this detailed understanding of the role of side-chain length, the chemical structure and their interplay are required. It was found that in the case of glutamic acid oligomers, the longer side chains facilitate attractive interactions with the cellulose surface, which forces the grafted chains to lie down on the surface. The additional methylene group in the side chain enables side-chain rotation, enhancing this effect. On the other hand, the shorter and more restricted side chains of aspartic acid oligomers prevent attractive interactions to a large degree and push the grafted chains away from the surface. The difference in side-chain length also leads to differences in other properties of the brush in divalent salt solutions. At a low grafting density, the longer side chains of glutamic acid allow the adsorbed cations to be spatially distributed inside the brush resulting in a charge inversion. With an increase in grafting density, the difference in the total charge of the aspartic and glutamine brushes disappears, but new structural features appear. The longer sides allow for ion bridging between the grafted chains and the cellulose surface without a significant change in main-chain conformation. This leads to the brush structure being less sensitive to changes in salt concentration.

scholarly journals Effects of Various Types of Expandable Graphite and Blackcurrant Pomace on the Properties of Viscoelastic Polyurethane Foams

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1801
Author(s):  
Rafał Oliwa ◽  
Joanna Ryszkowska ◽  
Mariusz Oleksy ◽  
Monika Auguścik-Królikowska ◽  
Małgorzata Gzik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Structure ◽  
Oxygen Index ◽  
Polyurethane Foams ◽  
Expandable Graphite ◽  
Ftir Analysis ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
Physical And Chemical ◽  
Scanning Electron

We investigated the effect of the type and amount of expandable graphite (EG) and blackcurrant pomace (BCP) on the flammability, thermal stability, mechanical properties, physical, and chemical structure of viscoelastic polyurethane foams (VEF). For this purpose, the polyurethane foams containing EG, BCP, and EG with BCP were obtained. The content of EG varied in the range of 3–15 per hundred polyols (php), while the BCP content was 30 php. Based on the obtained results, it was found that the additional introduction of BCPs into EG-containing composites allows for an additive effect in improving the functional properties of viscoelastic polyurethane foams. As a result, the composite containing 30 php of BCP and 15 php of EG with the largest particle size and expanded volume shows the largest change in the studied parameters (hardness (H) = 2.65 kPa (+16.2%), limiting oxygen index (LOI) = 26% (+44.4%), and peak heat release rate (pHRR) = 15.5 kW/m2 (−87.4%)). In addition, this composite was characterized by the highest char yield (m600 = 17.9% (+44.1%)). In turn, the change in mechanical properties is related to a change in the physical and chemical structure of the foams as indicated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis.

scholarly journals Coupled Preparation of Ferronickel and Cementitious Material from Laterite Nickel Ores

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4992
Author(s):  
Ruimeng Shi ◽  
Xiaoming Li ◽  
Yaru Cui ◽  
Junxue Zhao ◽  
Chong Zou ◽  
...  
Keyword(s):  
Direct Reduction ◽  
Cementitious Materials ◽  
Tricalcium Silicate ◽  
Cementitious Material ◽  
Raw Material ◽  
Tricalcium Aluminate ◽  
Thermodynamic Conditions ◽  
Nickel Ores ◽  
Main Components ◽  
Factsage Software

Nickel slags can be produced through ferronickel preparation by the pyrometallurgical processing of laterite nickel ores; however, such techniques are underutilized at present, and serious environmental problems arise from the stockpiling of such nickel ores. In this study, a modification to the process of ferronickel preparation by the direct reduction of carbon bases in laterite nickel ores is proposed. The gangue from the ore is used as a raw material to prepare a cementitious material, with the main components of tricalcium silicate and tricalcium aluminate. By using FactSage software, thermodynamic calculations are performed to analyze the reduction of nickel and iron and the effect of reduction on the formation of tricalcium silicate and tricalcium aluminate. The feasibility of a coupled process to prepare ferronickel and cementitious materials by the direct reduction of laterite nickel ore and gangue calcination, respectively, is discussed under varying thermodynamic conditions. Different warming strategies are applied to experimentally verify the coupled reactions. The coupled preparation of ferronickel and cementitious materials with calcium silicate and calcium aluminate as the main phases in the same experimental process is realized.

scholarly journals Feasibility study of assessing the Preclinical Alzheimer Cognitive Composite (PACC) score via videoconferencing

2021 ◽  
Author(s):  
Giulia Seghezzo ◽  
Yvonne Van Hoecke ◽  
Laura James ◽  
Donna Davoren ◽  
Elizabeth Williamson ◽  
...  
Keyword(s):  
Cognitive Impairment ◽  
Clinical Practice ◽  
Linear Regression ◽  
Multiple Linear Regression ◽  
Pearson Correlation ◽  
Cognitive Tests ◽  
Strong Positive Correlation ◽  
Pearson Correlation Coefficient ◽  
Face To Face ◽  
The Difference

Abstract Background The Preclinical Alzheimer Cognitive Composite (PACC) is a composite score which can detect the first signs of cognitive impairment, which can be of importance for research and clinical practice. It is designed to be administered in person; however, in-person assessments are costly, and are difficult during the current COVID-19 pandemic. Objective To assess the feasibility of performing the PACC assessment with videoconferencing, and to compare the validity of this remote PACC with the in-person PACC obtained previously. Methods Participants from the HEalth and Ageing Data IN the Game of football (HEADING) Study who had already undergone an in-person assessment were re-contacted and re-assessed remotely. The correlation between the two PACC scores was estimated. The difference between the two PACC scores was calculated and used in multiple linear regression to assess which variables were associated with a difference in PACC scores. Findings Of the 43 participants who were invited to this external study, 28 were re-assessed. The median duration in days between the in-person and the remote assessments was 236.5 days (7.9 months) (IQR 62.5). There was a strong positive correlation between the two assessments for the PACC score, with a Pearson correlation coefficient of 0·82 (95% CI 0·66, 0·98). The multiple linear regression found that the only predictor of the PACC difference was the time between assessments. Interpretation This study provides evidence on the feasibility of performing cognitive tests online, with the PACC tests being successfully administered through videoconferencing. This is relevant, especially during times when face-to-face assessments cannot be performed.

Thermogravimetric Analysis of Glucose-Based and Fructose-Based Carbohydrates

2013 ◽  
Vol 805-806 ◽  
pp. 265-268 ◽  
Author(s):  
Fang Ming Cui ◽  
Xiao Yuan Zhang ◽  
Li Min Shang
Keyword(s):  
Activation Energy ◽  
Thermogravimetric Analysis ◽  
Kinetic Parameters ◽  
Degree Of Polymerization ◽  
Experiment Data ◽  
Pyrolysis Characteristics ◽  
The Difference ◽  
Kinetic Calculations

Thermogravimetric analysis (TGA) was employed to study the pyrolysis characteristics of four glucose-based and three fructose-based carbohydrates. Kinetic parameters were calculated based on the experiment data. The results indicated that the starting and maximal pyrolysis temperatures of the glucose-based carbohydrates were increased steadily as the rising of their degree of polymerization (DP). The fructose-based carbohydrates exhibited similar pyrolysis behaviors as the glucose-based carbohydrates, but the difference was smaller. Kinetic calculations revealed that the activation energy values of the glucose-based carbohydrates were higher than those of the fructose-based carbohydrates, indicating the glucose-based carbohydrates were more difficult to decompose than the fructose-based carbohydrates.

Sign in / Sign up

Export Citation Format

Share Document