scholarly journals Optimization of Ultrasound-Assisted Extraction on Antioxidative Activity of Malus toringoides Using Response Surface Methodology

Processes ◽  
2019 ◽  
Vol 7 (5) ◽  
pp. 270 ◽  
Author(s):  
Qiang Ye ◽  
Li Guo ◽  
Hongmei Liu ◽  
Yushi Liu ◽  
Cunyan Zhang ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Umbilical Vein ◽  
Extraction Temperature ◽  
Least Squares Regression ◽  
Protective Activity ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction

Ultrasonic-assisted extraction (UAE) was optimized using response surface methodology (RSM) to maintain the cyto-protective activity of M.toringoides against oxidative stress. The optimal conditions for UAE were a 58 mL/g liquid-solid ratio, a 38 °C extraction temperature, an 85% solvent concentration, and a 19-min extraction time, which resulted in a protection rate of 54.57% against hydrogen peroxide-induced oxidative stress in human umbilical vein endothelial cells (HUVECs). These results were comparable to the predicted value of 53.75%. The extracts showed excellent antioxidant activity, and phlorizin was detected in the dried leaves of Malus.toringoides. The highest yield of phlorizin (101.239 mg/g) was also obtained using these conditions. Taken together, these results showed that the method successfully integrated RSM and partial least squares regression methods to optimize M.toringoides extraction to yield the highest cyto-protective activity and effectively increase the yield of phlorizin from M.toringoides.

scholarly journals Response Surface Methodology (RSM)-Based Optimization of Ultrasound-Assisted Extraction of Sennoside A, Sennoside B, Aloe-Emodin, Emodin, and Chrysophanol from Senna alexandrina (Aerial Parts): HPLC-UV and Antioxidant Analysis

Molecules ◽  
2022 ◽  
Vol 27 (1) ◽  
pp. 298
Author(s):  
Perwez Alam ◽  
Omar M. Noman ◽  
Rashed N. Herqash ◽  
Omer M. Almarfadi ◽  
Ali Akhtar ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Aerial Parts ◽  
Assisted Extraction ◽  
Aloe Emodin ◽  
Ultrasound Assisted

In this study, ultrasound-assisted extraction conditions were optimized to maximize the yields of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol from S. alexandrina (aerial parts). The three UAE factors, extraction temperature (S1), extraction time (S2), and liquid to solid ratio (S3), were optimized using response surface methodology (RSM). A Box–Behnken design was used for experimental design and phytoconstituent analysis was performed using high-performance liquid chromatography-UV. The optimal extraction conditions were found to be a 64.2 °C extraction temperature, 52.1 min extraction time, and 25.2 mL/g liquid to solid ratio. The experimental values of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol (2.237, 12.792, 2.457, 0.261, and 1.529%, respectively) agreed with those predicted (2.152, 12.031, 2.331, 0.214, and 1.411%, respectively) by RSM models, thus demonstrating the appropriateness of the model used and the accomplishment of RSM in optimizing the extraction conditions. Excellent antioxidant properties were exhibited by S. alexandrina methanol extract obtained using the optimized extraction conditions with a DPPH assay (IC50 = 59.7 ± 1.93, µg/mL) and ABTS method (47.2 ± 1.40, µg/mL) compared to standard ascorbic acid.

Process Optimization of Ultrasound-Assisted Extraction of Pectin from Helianthus annuus L. Heads by Response Surface Methodology

2014 ◽  
Vol 955-959 ◽  
pp. 848-854
Author(s):  
Yin Xiang Gao ◽  
Lei Yang ◽  
Yuan Gang Zu ◽  
Li Ping Yao
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Helianthus Annuus ◽  
Response Surfaces ◽  
Quadratic Model ◽  
High Yield ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted

An ultrasound-assisted procedure for the extraction of pectin from heads ofHelianthus annuusL. (sunflower) was established. A Box–Behnken design (BBD) was employed to optimize the extraction temperature (X1: 30–50°C), extraction time (X2: 20–40 min) and pH (X3: 2.5–3.5) to obtain a high yield of pectin with high degree of esterification (DE) from sunflower heads. Analysis of variance showed that the contribution of a quadratic model was significant for the pectin extraction yield and DE. An optimization study using response surface methodology was performed and 3D response surfaces were plotted from the mathematical model. According to the RSM model, the highest pectin yield (23.11 ± 0.08%) and DE (39.85 ± 0.14%) can be achieved when the UAE process is carried out at 50°C for 40min using a hydrochloric acid solution of pH 3.0. These results suggest that ultrasound-assisted extraction could be a good option for the extraction of functional pectin from sunflower heads at industrial level.

Optimization of Ultrasonic-Assisted Extraction of Flavonoids from Moringa oleifera Leaves Using Response Surface Methodology

2021 ◽  
pp. 363-367
Author(s):  
Abdelhakim Benarima ◽  
Mohamed Nasreddine Raache ◽  
Moulay Rachid Kouadri ◽  
Yassine Belaiche ◽  
Salah Eddine Laouini
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Moringa Oleifera ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Moringa Oleifera Leaves ◽  
Ultrasonic Assisted Extraction

Moringa oleifera is considered one of the most useful plants in the world because it's rich in bioactive substances, which employing on modern medical treatment, also can be used for many fields: pharmaceutical, food and cosmetics purposes. In this study, the response surface methodology (RSM) based on a Box–Behnken design (BBD) was employed to optimize the extraction time (X1: 20–60 min), extraction temperature (X2: 15–45 °C) and solvent-solid ratio (X3: 5–7 ml/g), to obtain a high crude of flavonoids yield from Moringa oleifera Leaves by ultrasonic-assisted extraction technique (UAE). The optimum conditions were an extraction time 23 (min), extraction temperature 44 (°C) and solvent-solid ratio 5.05 (ml/g). Under these conditions, the experimental yield was 72.65 (mg ER/g), well matched with the predicted yield 74.34 (mg ER/g) with the coefficients of determination (R2= 0.9861), thus indicating the suitability of response surface methodology in optimizing the ultrasound-assisted extraction of flavonoids from Moringa oleifera Leaves.

Optimization of Ultrasonic-Assisted Extraction for Pinocembrin from Flos populi Using Response Surface Methodology

2017 ◽  
Vol 13 (5) ◽  
Author(s):  
Zunlai Sheng ◽  
Biying Wang ◽  
Jiahong Zhao ◽  
Wenhui Yu
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Time ◽  
Surface Model ◽  
Extraction Temperature ◽  
Acoustic Intensity ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasonic Assisted

Abstract In this study, the ultrasound-assisted extraction (UAE) was used for extraction of pinocembrin from Flos populi. Based on the results of the single-factor experiment, four independent parameters, including ethanol concentration (40–80 %), extraction temperature (50–70 °C), extraction time (25–45 min) and electrical acoustic intensity (40.8–81.5 W/m2) were further investigated using response surface methodology (RSM) coupled with Box-Behnken design. The experimental data were fitted to the quadratic response surface model using multiple regression analysis with high adjusted determination coefficient value (R 2) of 0.9697. The highest yield (134.2 ± 1.53 mg/g) of pinocembrin was obtained under the optimal conditions (ethanol concentration of 68 %, extraction temperature of 69 °C, extraction time of 42 min and electrical acoustic intensity of 66.81 W/cm2), which agreed to the predicted value of 132.9 mg/g. Moreover, the comparison between the UAE and reflux extraction also showed the suitability of UAE for pinocembrin from Flos populi.

scholarly journals Optimization of Ultrasound-Assisted Extraction of Bioactive Compounds from Acacia Seyal Gum Using Response Surface Methodology and Their Chemical Content Identification by Raman, FTIR, and GC-TOFMS

Antioxidants ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1612
Author(s):  
Tahani Maher ◽  
Nassereldeen A. Kabbashi ◽  
Mohamed E. S. Mirghani ◽  
Md Z. Alam ◽  
Djabir Daddiouaissa ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Bioactive Compounds ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Acacia Seyal

Acacia Seyal gum (ASG), also known as gum Arabic, is an antioxidant-rich soluble fiber. ASG has been reported to have many biological activities, including anticancer, antidiabetic, antiulcer, and immunomodulatory activity. Extraction of bioactive compounds from ASG is commonly performed using conventional extraction methods. However, these techniques have certain limitation in terms of extraction time, energy, and solvent requirements. Ultrasound-assisted extraction (UAE) could be used as an alternative technique to extract bioactive compounds in less time, at low temperature, and with less energy and solvent requirements. In this study, the UAE extraction of ASG was optimized using response surface methodology (RSM). A face-centered central composite design (FCCCD) was used to monitor the effect of different independent factors of ultrasound operation (sonication time, temperature, and solvent ratio) on ASG extraction yield. In addition, screening and characterization of phytochemicals in 60% ethanol ASG extract was carried out using Raman microscopy, Fourier transform infrared spectroscopy (FTIR), and gas chromatography time-of-flight mass spectroscopy (GC-TOFMS) analysis. The results indicated that, under optimal conditions (extraction time 45 min, extraction temperature 40 °C, and solid–liquid ratio of 1:25 g/mL), the yield of ASG was 75.87% ± 0.10. This yield was reasonably close to the predicted yield of 75.39% suggested by the design of experiment. The ANOVA revealed that the model was highly significant due to the low probability value (p < 0.0001). Raman spectrum fingerprint detected polysaccharides, such as galactose and glucose, and protein like lysine and proline, while FTIR spectrum revealed the presence of functional groups peaks value of alkanes, aldehydes, aliphatic amines, and phenol. GC-TOFMS spectroscopic detected the presence of strong d-galactopyranose, carotenoid, and lycopene antioxidant compounds. In conclusion, this study demonstrated that the UAE technique is an efficient method to achieve a high yield of ASG extracts. The selected model is adequate to optimize the extraction of several chemical compounds reported in this study.

A ULTRASOUND-ASSISTED EXTRACTION (UAE) OF PHYTOCHEMICALS WITH RESPONSE SURFACE METHODOLOGY(RSM) IN Curcuma xanthorrhiza

2020 ◽  
Vol 2 (2) ◽  
pp. 139-146
Author(s):  
Najiba Azemi ◽  
Norazah Basar ◽  
Susilawati Toemen
Keyword(s):  
Response Surface Methodology ◽  
Optimum Condition ◽  
Response Surface ◽  
Extraction Process ◽  
Extraction Time ◽  
Array Detector ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted

The Curcuma genus belongs to the Zingiberaceae family is commonly known for its usage as spice and medicine.it is widely used in pharmaceutical, food supplement, cosmetic industries lead to economic benefits. Recently, noticing to an eco-friendly extraction approach which provides the extraction efficiency is considered that in the extraction process, exploring the optimum condition of extraction parameters. This study is performed to improve the bioactive compounds extraction from C. xanthorrhiza by ultrasound-assisted extraction (UAE) through Response Surface Methodology (RSM). Three independent variables: extraction time (5-20 min), temperature (30-50 ° C) and liquid-solid ratio (6-10 mL / g) are applied using Box-Behnken (BBD) design. Quantification of curcumin and xanthorrhizol are carried out using reversed-phase high-performance liquid chromatography (RP HPLC) equiped by a photodiode array detector. Extraction time 20 minutes, temperature of 50°C, and LS ratio 8 mL/g are found as the optimum condition of extraction yield and quantification of xanthorrhizol. Curcumin 's optimum state, however, is observed at extraction time 12.50 minutes, temperature 30 ° C, and liquid-solid ratio of 10 mL / g. This study suggests that there are favorable potential using method of ultrasound-assisted extraction under specific parameters in the extraction process which is advantageous for advanced research.  

scholarly journals Optimum Conditions and LC-ESI-MS Analysis of Phenolic Rich Extract from Eucalyptus marginata L. under Maceration and Ultrasound-Assisted Extraction Methods Using Response Surface Methodology

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Soumaya Hasni ◽  
Ghayth Rigane ◽  
Hanene Ghazghazi ◽  
Hajer Riguene ◽  
Amir Bouallegue ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Phenolic Compounds ◽  
Response Surface ◽  
Total Phenolic ◽  
Ultrasound Assisted Extraction ◽  
Eucalyptus Marginata ◽  
Esi Ms ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted

Eucalyptus marginata L. has a significant value in traditional medicine and recently has been shown to possess many pharmacological properties in vitro. The main goal of the present study was to optimize the extraction parameters of phenolic compounds from Eucalyptus marginata L. leaves using the extraction technique assisted by ultrasound in comparison with maceration using response surface methodology as a predicted tool. Therefore, total phenolic and flavonoid contents have been optimized, taking into account four variables: extraction time, temperature, liquid-to-solid ratio, and ethanol concentration. The optimum ultrasound-assisted extraction method for total phenolic and total flavonoid contents was obtained by ensuring the following parameters: t = 49.9 min, T = 74.9°C, liquid-to-solid ratio = 39.5 ml/g, and ethanol = 58.48%. The optimum extract has been subjected to LC-ESI-MS analysis. This technique allowed us to identify ten phenolic compounds: four phenolic acids mainly gallic acid (27.77 ± 0.06 µg/g DW) and protocatechuic acid (37.66 ± 0.04 µg/g DW) and six flavonoid compounds such as quercetrin (150.78 ± 0.02 µg/g DW) and hyperoside (39.19 ± 0.03 µg/g DW). These green and efficient procedures should be a promising option to guide industrial design for the production of phenolic-rich plant extracts.

scholarly journals Optimization Extraction of Shikonin Using Ultrasound-Assisted Response Surface Methodology and Antibacterial Studies

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Xiang-Yue Huang ◽  
Hua-Lin Fu ◽  
Hua-Qiao Tang ◽  
Zhong-Qiong Yin ◽  
Wei Zhang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Bacterial Infections ◽  
Maximum Yield ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Arnebia Euchroma ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Time Kill

The objectives of this study were to develop and optimize ultrasound-assisted extraction (UAE) for shikonin from Arnebia euchroma using response surface methodology (RSM) and to evaluate the antimicrobial activity of shikonin. The maximum yield of shikonin was 1.26% under the optimal extraction conditions (ultrasound power, 93 W; time, 87 min; temperature, 39°C; and liquid-solid ratio, 11 : 1). Shikonin showed inhibitory activity against standard strains and clinical isolates to varying extents (MICs ranging from 128 to 1024 μg/mL, MBCs ranging from 256 to 2048 μg/mL), and it was more effective for Gram-positive bacteria as indicated by lower MIC and MBC values. Time-kill curves revealed that antibacterial activity of shikonin exhibited a dose-response relationship. In summary, via this study, we identified ultrasound-assisted RSM as the optimal extraction method for shikonin, which is a potential material for the treatment of bacterial infections.

scholarly journals Response Surface Optimized Ultrasonic Assisted Extraction of Total Flavonoids from QingLi Cao and Antioxidant Activities

2015 ◽  
Vol 9 (1) ◽  
pp. 134-142 ◽  
Author(s):  
Xudong Jiang ◽  
YaoLing Liao ◽  
GuiXi Lu ◽  
Zhike Xiao
Keyword(s):  
Response Surface ◽  
Antioxidant Activities ◽  
Reducing Power ◽  
Total Flavonoids ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

An ultrasound-assisted extraction technique was used to extract the total flavonoids from QingLi Cao. The optimal conditions were ethanol concentration 59.20%, liquid-to-solid ratio 31.15 mL/g, extraction time 57.42 min and extraction temperature 58.57°C, which were determined using response surface methodology. The antioxidant activities including reducing power, ABTS+, DPPH, superoxide anion and hydroxyl radical were evaluated, which suggested significant antioxidant activities.

scholarly journals Optimization of Ultrasound Assisted Extraction of Isoliquiritigenin from Licorice by Response Surface Methodology

2015 ◽  
Vol 9 (1) ◽  
pp. 149-154
Author(s):  
Hu Zhiyong ◽  
Zhou Yajing ◽  
Xu Xia ◽  
Liu Shuyan ◽  
Jing Jie
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Time ◽  
Ultrasound Assisted Extraction ◽  
Box Behnken Design ◽  
Solid Ratio ◽  
Chemopreventive Agent ◽  
Assisted Extraction ◽  
Potential Cancer

Isoliquiritigenin (ILG) of licorice is a potential cancer chemopreventive agent. In this paper, response surface methodology (RSM) integrating with Box-Behnken design (BBD) was firstly employed to optimize the ILG extraction, which based on the single-factor experiments. According to analysis, the effect of extraction time and ethanol concentration on yields was significantly. The optimum values were the ethanol concentration of 73.25%, extraction time of 27.82 min and liquid-solid ratio of 19.10: 1. Under these conditions, the highest yield of ILG from licorice was 0.26 mg/g.

Sign in / Sign up

Export Citation Format

Share Document