scholarly journals Weathered Sand of Basalt as a Potential Nickel Adsorbent

Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1238
Author(s):  
Jae Hong Park ◽  
Jae Kwan Lee
Keyword(s):  
Adsorption Process ◽  
Sem Analysis ◽  
Langmuir Model ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Freundlich Isotherms ◽  
Freundlich Equation ◽  
Low Concentrations ◽  
Pseudo Second Order

The natural mineral, weathered sand of basalt (WSB), was utilized to investigate whether nickel can be removed. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were performed to characterize WSB. The effects of various conditions, i.e., contact time, pH, WSB dosage, particle size of WSB, and temperature were analyzed. The experimental data were analyzed by two widely used equations, i.e., Langmuir and Freundlich isotherms. The results obtained revealed that the WSB adsorption process was more consistent with the Langmuir model than the Freundlich equation. The kinetics data fitted well into the pseudo-second-order model. The findings of the present study indicate that WSB could be used for removing nickel from aqueous solution. Moreover, its concentration can be reduced from 1.0 mg/L to ND (not detected, below the device limit <0.01 μg/L) under the optimal condition. Therefore, WSB is considered to be usable as one of the adsorbents for nickel removal in water. In addition, since heavy metals are often present in low concentrations in water, it is considered that WSB can be applied as one of the effective alternatives for removing low-concentration nickel.

scholarly journals Synthesis Fe3O4/Talc nanocomposite by coprecipition-ultrasonication method and advances in hexavalent chromium removal from aqueous solution

2020 ◽  
Vol 38 (9-10) ◽  
pp. 483-501
Author(s):  
Nguyen Thi Huong ◽  
Nguyen Ngoc Son ◽  
Vo Hoang Phuong ◽  
Cong Tien Dung ◽  
Pham Thi Mai Huong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Batch Experiments ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Langmuir And Freundlich Equations

The Fe3O4/Talc nanocomposite was synthesized by the coprecipitation-ultrasonication method. The reaction was carried out under a inert gas environment. The nanoparticles were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry techniques (VSM), the surface area of the nanoparticles was determined to be 77.92 m2/g by Brunauer-Emmett-Teller method (BET). The kinetic data showed that the adsorption process fitted with the pseudo-second order model. Batch experiments were carried out to determine the adsorption kinetics and mechanisms of Cr(VI) by Fe3O4/Talc nanocomposite. The adsorption process was found to be highly pH-dependent, which made the material selectively adsorb these metals from aqueous solution. The isotherms of adsorption were also studied using Langmuir and Freundlich equations in linear forms. It is found that the Langmuir equation showed better linear correlation with the experimental data than the Freundlich. The thermodynamics of Cr(VI) adsorption onto the Fe3O4/Talc nanocomposite indicated that the adsorption was exothermic. The reusability study has proven that Fe3O4/Talc nanocomposite can be employed as a low-cost and easy to separate.

scholarly journals Structuring of ZnTiO3/TiO2 Adsorbents for the Removal of Methylene Blue, Using Zeolite Precursor Clays as Natural Additives

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 898
Author(s):  
Ximena Jaramillo-Fierro ◽  
Silvia González ◽  
Fernando Montesdeoca-Mendoza ◽  
Francesc Medina
Keyword(s):  
Methylene Blue ◽  
Adsorption Process ◽  
Sol Gel ◽  
Area Measurement ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Surface Area Measurement ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption is an effective method of removing harmful pollutants from air and water. In the present study, zeolites prepared by sol-gel method from two Ecuadorian clays were combined with precursor clays and the ZnTiO3/TiO2 semiconductor for adsorbing methylene blue (MB) as a water contaminant. The synthesized compounds were characterized using powder X-ray diffraction, X-ray fluorescence, scanning electron microscopy, energy dispersive X-ray, and surface area measurement. These compounds were combined to form cylindrical extrudates of 0.2 cm (diameter) and 1.0 cm (length). The adsorption characteristics of the composites were measured using batch sorption studies as a function of pH, initial concentration, and contact time. The pseudo-second-order model and the Langmuir isotherm model were better suited to the adsorption process. The equilibrium state was achieved around 180 min of adsorption, and a pH of 7 was established as the optimal operating condition. The maximum adsorption values of the dye were obtained with the composites derived from G-Clay, whose average adsorption capacity was 46.36 mg g−1, in contrast with composites derived from R-Clay, whose average adsorption value was 36.24 mg g−1. The results reflect that synthesized composites could be used potentially for the removal of cationic dye from wastewater.

scholarly journals Adsorption purification of waste water from chromium by ferrite manganese

2020 ◽  
Vol 168 ◽  
pp. 00026
Author(s):  
Liliia Frolova ◽  
Mykola Kharytonov ◽  
Iryna Klimkina ◽  
Oleksandr Kovrov ◽  
Andrii Koveria
Keyword(s):  
Adsorption Process ◽  
Uv Spectroscopy ◽  
Second Order ◽  
Waste Waters ◽  
Equilibrium Isotherms ◽  
X Ray ◽  
First Order ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Kinetics Of

Plasma method is used to synthesize manganese ferrite. The basic properties of ferrite are determined by IR spectroscopy, UV spectroscopy, X-ray phase analysis, vibration magnetometry. The paper shows that the use of magnetically controlled sorbent allows to purify waste waters from chromium (III). The process of adsorption of chromium cations (III) is investigated. The kinetics of the process is studied. To describe the equilibrium isotherms, the experimental data are analysed by the models of Langmuir, Freundlich isotherms. Pseudo-first order, pseudo-second-order, and Weber-Morris are used to elucidate the kinetic parameters and mechanism of the adsorption process. It has been established that the removal of Cr (III) cations is described by the pseudo-second order of the Langmuir reaction and mechanism.

scholarly journals Removal of Cesium and Strontium From Radioactive Wastewater by Prussian Blue Nanorods

2022 ◽  
Author(s):  
Chuqing Yao ◽  
Yaodong Dai ◽  
Shuquan Chang ◽  
Haiqian Zhang
Keyword(s):  
Prussian Blue ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Radioactive Wastewater ◽  
Pseudo Second Order ◽  
Co Precipitation ◽  
Solvothermal Methods

Abstract In this work, novel Prussian blue tetragonal nanorods were prepared by template-free solvothermal methods for removal of radionuclide Cs and Sr. It was worth that Prussian blue nanorods exhibited the better adsorption performance than co-precipitation PB or Prussian blue analogue composites. Thermodynamic analysis implied that adsorption process was spontaneous and endothermic which was described well with Langmuir isotherm and pseudo-second-order equation, the maximum adsorption capacity of PB nanorod was estimated to be 194.26 mg g-1 and 256.62 mg g-1 for Cs+ and Sr2+. The adsorption mechanism of Cs+ and Sr2+ was studied by X-ray photoelectron spectroscopy, X-ray diffraction and 57Fe Mössbaure spectroscopy, the results revealed that Cs+ entered in PB crystal to generate a new phase, the most of Sr2+ was trapped in internal crystal and the other exchanged Fe2+. Furthermore, the effect of co-existing ions and pH for PB adsorption process were also investigated. The results suggest that PB nanorods were outstanding candidate for removal of Cs+ and Sr2+ from radioactive wastewater.

scholarly journals Obtaining adsorbents from acid and acid-thermal activation of bentonite for chlorothalonil pesticide removal

2020 ◽  
Vol 15 (3) ◽  
pp. 812-825
Author(s):  
Nadia Boudouara ◽  
Réda Marouf ◽  
Jacques Schott
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Thermal Activation ◽  
X Ray Diffraction ◽  
Acid Attack ◽  
Experimental Conditions ◽  
X Ray ◽  
Pesticide Removal ◽  
Freundlich Equation ◽  
Pseudo Second Order

Abstract Bentonite samples collected from M'Zila of Mostaganem (Algeria) were treated in first protocol with sulfuric acid at concentrations 1, 3 and 6N. The second protocol concerns the acid attack of bentonite combined with thermal treatment at temperatures of 100 and 200 °C. The obtained adsorbents were characterized by different analyses techniques such as chemical composition, X-ray diffraction (XRD), specific surface area and pHPZC. The modified bentonites were used for removal of Chlorothalonil (Chl) from aqueous solution. The adsorption behavior of the pesticide was studied under different experimental conditions of pH, contact time, concentration of Chl and temperature of solution. The adsorption of Chl followed pseudo-second order kinetics and was described by the Freundlich equation. Thermodynamic study revealed that Chl adsorption was endothermic and physical in nature.

scholarly journals Equilibrium and Kinetic Study of Removal Copper(II) from Aqueous Solution Using Chicken Eggshells: Low Cost Sorbent

Molekul ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. 28
Author(s):  
Mohammad Jihad Madiabu ◽  
Joko Untung ◽  
Imas Solihat ◽  
Andi Muhammad Ichzan
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Adsorption Condition ◽  
Pseudo Second Order ◽  
Effect Of Copper

The research aims to investigate feasibility eggshells as potential adsorbent to remove copper(II) ions from aqueous solution. Eggshells powder was characterized using X-ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy. Effect of copper(II) initial concentration, adsorbent dosage, and contact time have conducted. The optimum adsorption condition obtained when 0.7 g eggshells applied to 50 mg/L copper(II) solution for 50 minutes. The maximum percentage of copper(II) removal was exceeded more than 85%. Langmuir and Freundlich isotherm model were applied to describe the equilibrium adsorption. Copper(II) kinetics sorption process was fitted to pseudo-second order model with a rate constant equal to 0.516 g/mg.min. The results clearly exhibit that eggshells powder can be effectively used to remove copper(II) ions from aqueous solutions.

scholarly journals The adsorption behavior and mechanism investigation of Cr(VI) ions removal by poly(2-(dimethylamino)ethyl methacrylate)/poly(ethyleneimine) gels

2015 ◽  
Vol 80 (7) ◽  
pp. 889-902 ◽  
Author(s):  
Zhengbo Hou ◽  
Weixia Zhu ◽  
Hang Song ◽  
Pengfei Chen ◽  
Shun Yao
Keyword(s):  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Interaction Mechanism ◽  
Langmuir Model ◽  
Adsorption Behavior ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Ethyl Methacrylate ◽  
Pseudo Second Order ◽  
Scanning Electron

The composite hydrogels based on N,N?-dimethylamino ethyl methacrylate (DMAEMA) and polyethyleneimine (PEI) were prepared by amino radical polymerization and confirmed by Fourier Transform Infrared Spectra (FTIR) and elemental analysis. Then adsorption behavior and mechanism of Cr(VI) ions on the obtained materials were investigated with scanning electron microscope, Zeta potential and thermal gravity analysis, etc. The adsorption process was found to follow the pseudo-second order kinetics and Langmuir model, and the maximum adsorption capacity of Cr(VI) ions reached 122.8 mg g-1. X-ray photoelectron spectroscopy (XPS) and pH analysis revealed that the Cr(VI) ions were adsorbed into the gels through electrostatic interaction mechanism, and SO42- in the solution had a great effect on the adsorption process. In addition, high pH and ionic strength could reduce the uptakes of adsorbate, which could be used for desorption of Cr(VI) ions from the gels.

scholarly journals La-Doped ZnTiO3/TiO2 Nanocomposite Supported on Ecuadorian Diatomaceous Earth as a Highly Efficient Photocatalyst Driven by Solar Light

Molecules ◽  
2021 ◽  
Vol 26 (20) ◽  
pp. 6232
Author(s):  
Ximena Jaramillo-Fierro ◽  
Silvia González ◽  
Francesc Medina
Keyword(s):  
Diatomaceous Earth ◽  
Diffuse Reflectance Spectroscopy ◽  
Solar Irradiation ◽  
Batch Reactors ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
La Doped

Currently, there is great interest in the use of TiO2 for photocatalytic remediation of wastewater. Doping, heterojunction, and immobilization on porous materials are effective methods to improve the photocatalytic efficiency of this semiconductor oxide. In this study, ZnTiO3/TiO2 (ZTO) and ZnTiO3/TiO2/La (ZTO/La) nanocomposites were successfully prepared and immobilized on diatomaceous earth (DE). The composition and texture of the composites prepared were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM-EDX), and specific surface area (SSA). The adsorption capacity and photocatalytic activity of the composites were determined via degradation of methylene blue (MB) in batch reactors. The materials evaluated were prepared in the shape of 0.2 cm (diameter) and 1.0 cm (length) cylindrical extrudates. The results indicate that the ZTO/La-DE composite exhibited higher efficiency for the removal of MB under solar irradiation than both ZTO-DE and DE. The pseudo-second-order model and the Langmuir isotherm model were better suited to explain the adsorption process. The highest degradation percentage of MB obtained was 96% after 150 min of irradiation. The results indicate that synthesized composite could be used for the removal of cationic dyes in wastewater.

Removal of sunset yellow FCF from aqueous solution using polyethyleneimine-modified MWCNTs

2015 ◽  
Vol 73 (6) ◽  
pp. 1269-1278 ◽  
Author(s):  
Hejun Gao ◽  
Luanluan Zhang ◽  
Yunwen Liao
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Mechanism ◽  
Adsorption Process ◽  
Langmuir Model ◽  
Order Model ◽  
Sunset Yellow ◽  
Multi Wall Carbon Nanotubes ◽  
Initial Ph ◽  
Pseudo Second Order

A novel adsorbent consisting of polyethyleneimine-modified multi-wall carbon nanotubes (PEI-MWCNTs) was synthesized by grafting PEI on the carboxyl MWCNTs. The surface properties of the PEI-MWCNTs were measured by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared, and zeta potential. The adsorption behavior of the PEI-MWCNTs was investigated using sunset yellow FCF as adsorbate. The effects of dosage of adsorbent, the initial pH of solution, contact time and temperature on the adsorption capacity were studied. Then, the kinetics and thermodynamics of the adsorption process were further investigated. Experimental results showed that the adsorption kinetics fitted a pseudo-second-order model and the adsorption isotherms agreed well with the Langmuir model. The adsorption process occurred very fast and the adsorption capacity of PEI-MWCNTs was much higher than that of many of the previously reported adsorbents. Additionally, the plausible adsorption mechanism was discussed.

Sorption properties of Amberlite XAD 7 functionalized with sodium β-glycerophosphate

2016 ◽  
Vol 88 (12) ◽  
pp. 1143-1154
Author(s):  
Andreea Gabor ◽  
Corneliu Mircea Davidescu ◽  
Adina Negrea ◽  
Mihaela Ciopec ◽  
Cornelia Muntean ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Ph Value ◽  
Sorption Properties ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
X Ray ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Efficient Adsorbent

Abstract This paper presents the sorption properties of a new adsorbent material prepared by impregnating Amberlite XAD 7 polymer with sodium β-glycerophosphate. For impregnation, the pellicular vacuum solvent vaporization method was employed. The functionalization was evidenced by energy dispersive X-ray analysis. The usefulness of this material and its performances were studied for the adsorption of the rare earth element La(III) in batch experiments. The influence of various parameters affecting the adsorption of lanthanum like contact time, initial concentration, pH value, and temperature was studied. The kinetic of the adsorption process was best described by the pseudo-second-order model. Sips isotherm was found to be the best fit of the equilibrium data. The maximum adsorption capacity of the functionalized material was of 33.8 mg La(III)/g. The values of thermodynamic parameters (ΔGo, ΔHo, ΔSo) showed that the adsorption process was endothermic and spontaneous. The results proved that Amberlite XAD 7 functionalized with sodium β-glycerophosphate is an efficient adsorbent for the removal of La(III) ions from aqueous solutions. Quantum chemistry was performed using Spartan software.

Sign in / Sign up

Export Citation Format

Share Document