scholarly journals In Situ Modification of Activated Carbons by Oleic Acid under Microwave Heating to Improve Adsorptive Removal of Naphthalene in Aqueous Solutions

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 391
Author(s):  
Zhansheng Wu ◽  
Pengyun Liu ◽  
Zhilin Wu ◽  
Giancarlo Cravotto
Keyword(s):  
Oleic Acid ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Microwave Heating ◽  
Column Height ◽  
Batch Adsorption ◽  
One Pot ◽  
Column Adsorption ◽  
Adsorption Data

This study aimed to improve the adsorption capacity of activated carbon (AC) towards naphthalene (NAP) in aqueous solutions. Starch-based AC (SAC) and pulverized coal-based AC (PCAC) were prepared in a one-pot procedure by activation with oleic acid and KOH under microwave heating. Brunauer–Emmett–Teller (BET) specific surface areas reached 725.0 and 912.9 m2/g for in situ modified SAC (O-SAC1) and PCAC (O-PCAC1), respectively. π–π bond, H-bond, and hydrophobic effects were directly involved in the NAP adsorption process. Batch adsorption data were well fitted by pseudo-second order kinetics and the Freundlich isotherm model. As compared to ACs prepared with only KOH activation, NAP adsorption capacities of PCAC and SAC prepared by the one-pot method increased by 16.9% and 13.7%, respectively. Influences of varying factors were investigated in column adsorption of NAP using O-SAC1 and O-PCAC1. Based on breakthrough curves analysis, the larger column height (H), lower flow rate (Q0), and lower initial concentration (C0) resulted in the longer breakthrough and exhaustion times in both cases. Specifically, we concluded that O-PCAC1 exhibits better adsorption capacity than O-SAC1 in the given conditions. The optimized operating parameters were 1 cm (H), 1 mL/min (Q0) and 30 mg/L (C0). Finally, column adsorption data could be well fitted by the Thomas model.

scholarly journals Removal of Cu(II) from Aqueous Solutions Using Amine-Doped Polyacrylonitrile Fibers

2020 ◽  
Vol 10 (5) ◽  
pp. 1738
Author(s):  
Kay Thwe Aung ◽  
Seung-Hee Hong ◽  
Seong-Jik Park ◽  
Chang-Gu Lee
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Naoh Solution ◽  
Surface Modified ◽  
Pan Fibers

Polyacrylonitrile (PAN) fibers were prepared via electrospinning and were modified with diethylenetriamine (DETA) to fabricate surface-modified PAN fibers. The surface-modified PAN fibers were used to evaluate their adsorption capacity for the removal of Cu(II) from aqueous solutions. Batch adsorption experiments were performed to examine the effects of the modification process, initial concentration, initial pH, and adsorbent dose on the adsorption of Cu(II). Kinetic analysis revealed that the experimental data fitted the pseudo-second-order kinetic model better than the pseudo-first-order model. Adsorption equilibrium studies were conducted using the Freundlich and Langmuir isotherm models, and the findings indicated that the PAN fibers modified with 85% DETA presented the highest adsorption capacity for Cu(II) of all analyzed samples. Moreover, the results revealed that the Freundlich model was more appropriate than the Langmuir one for describing the adsorption of Cu(II) onto the modified fibers at various initial Cu(II) concentrations. The maximum adsorption capacity was determined to be 87.77 mg/g at pH 4, and the percent removal of Cu(II) increased as the amount of adsorbent increased. Furthermore, the surface-modified PAN fibers could be easily regenerated using NaOH solution. Therefore, surface-modified PAN fibers could be used as adsorbents for the removal of Cu(II) from aqueous solutions.

Surface Charge and Adsorption Characteristics for Fluoride of Hexadecyltrimethylammonium Modified Vermiculite

2013 ◽  
Vol 781-784 ◽  
pp. 2265-2268 ◽  
Author(s):  
Shi Yong Wei ◽  
Xu Hong Deng
Keyword(s):  
Aqueous Solutions ◽  
Surface Charge ◽  
Adsorption Capacity ◽  
Langmuir Model ◽  
Point Of Zero Charge ◽  
Hexadecyltrimethylammonium Bromide ◽  
Fluoride Ions ◽  
Langmuir Adsorption ◽  
Adsorption Characteristics ◽  
Adsorption Data

HDTMA-modified vermiculite (HDTMA-Ver) was formed in a suspension by the interactions between vermiculite and hexadecyltrimethylammonium bromide (HDTMA). For vermiculite and HDTMA-Ver, the pH of the point of zero charge (pHpzc) is 3.16 and 5.09, the surface charge at pH 4.5 is-0.167 and 0.083 mmol/g, and the Langmuir adsorption capacity (qmax) is 4.98 and 8.67 mg/g, respectively. The adsorption data for fluoride by vermiculite and HDTMA-Ver could be fitted by Langmuir model. The as-prepared HDTMA-Ver exhibited excellent ability to remove fluoride ions from aqueous solutions.

scholarly journals Sorptive removal of phenanthrene from aqueous solutions using magnetic and non-magnetic rice husk-derived biochars

2018 ◽  
Vol 5 (5) ◽  
pp. 172382 ◽  
Author(s):  
Wei Guo ◽  
Shujuan Wang ◽  
Yunkai Wang ◽  
Shaoyong Lu ◽  
Yue Gao
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Rice Husk ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Magnetic Modification ◽  
Pseudo Second Order ◽  
Rice Husk Biochar

A magnetically modified rice husk biochar (MBC) was successfully prepared by a hydrothermal method from original biochar (BC) and subsequently used to remove phenanthrene (PHE) from aqueous solutions. The porosity, specific surface area and hydrophobicity of BC were significantly improved (approx. two times) after magnetic modification. The adsorption data fitted well to pseudo-second-order kinetic and Langmuir models. Compared with BC, MBC had a faster adsorption rate and higher adsorption capacity of PHE. The adsorption equilibrium for PHE on MBC was achieved within 1.0 h. The maximum adsorption capacity of PHE on MBC was 97.6 mg g −1 based on the analysis of the Sips model, which was significantly higher than that of other sources of BCs. The adsorption mechanism of the two BCs was mainly attributed to the action of surface functional groups and π–π-conjugated reactions. The adsorption of PHE on MBC mainly occurred in the functional groups of C–O and Fe 3 O 4 , but that on BC was mainly in the functional groups of –OH, N–H, C=C and C–O.

Adsorption of Cu(II) from Aqueous Solution by Peanut Shell

2011 ◽  
Vol 347-353 ◽  
pp. 1852-1855 ◽  
Author(s):  
Zheng Jun Gong ◽  
Cong Cong Tang ◽  
Cai Yun Sun ◽  
Lu Tang ◽  
Jun Chen
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Isotherms ◽  
Batch Adsorption ◽  
Present System ◽  
Peanut Shell ◽  
Optimum Conditions ◽  
Langmuir Adsorption ◽  
Adsorption Data ◽  
Adsorption Intensity

A natural peanut shell was used as adsorbent for removal of Cu(Ⅱ) from aqueous solution. Optimum conditions for the elimination of Cu(Ⅱ) from aqueous solution were established by means of a batch adsorption technique. The applicability of the Langmuir and Freundlich adsorption isotherms for the present system was tested. The Langmuir adsorption capacity Qmax (mg/g) is 39.68 and the equilibrium constant b is 0.00776. The Freundlich adsorption capacity k is 0.978 and adsorption intensity n is 1.65. The goodness of fitness was obtained with the Langmuir and Freundlich adsorption isotherms from the equilibrium adsorption data.

scholarly journals Removal of Mercury(II) from Aqueous Solutions by Adsorption on Poly(1-amino-5-chloroanthraquinone) Nanofibrils: Equilibrium, Kinetics, and Mechanism Studies

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Shaojun Huang ◽  
Chengzhang Ma ◽  
Yaozu Liao ◽  
Chungang Min ◽  
Ping Du ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Repeated Use ◽  
Real Wastewater ◽  
Adsorption Desorption ◽  
Order Rate Equation

Poly(1-amino-5-chloroanthraquinone) (PACA) nanofibrils were applied as novel nanoadsorbents for highly toxic mercury removal from aqueous solutions. A series of batch adsorption experiments were conducted to study the effect of adsorbent dose, pH, contact time, and metal concentration on Hg(II) uptake by PACA nanofibrils. Kinetic data indicated that the adsorption process of PACA nanofibrils for Hg(II) achieved equilibrium within 2 h following a pseudo-second-order rate equation. The adsorption mechanism of PACA nanofibrils for Hg(II) was investigated by Fourier transform-infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) analyses. The adsorption isotherm of Hg(II) fitted well the Langmuir model, exhibiting superb adsorption capacity of 3.846 mmol of metal per gram of adsorbent. Lastly, we found out that the as-synthesized PACA nanofibrils are efficient in Hg(II) removal from real wastewater. Furthermore, five consecutive adsorption-desorption cycles demonstrated that the PACA nanofibrils were suitable for repeated use without considerable changes in the adsorption capacity.

scholarly journals Arsenic Removal from Aqueous Solutions Using Carbon Embedded Silica and Zeolite: Column Adsorption Studies

2020 ◽  
pp. 42-53
Keyword(s):  
Aqueous Solutions ◽  
Rice Husk ◽  
Arsenic Removal ◽  
Freundlich Isotherm ◽  
Column Height ◽  
Isotherm Models ◽  
Tem Analysis ◽  
X Ray ◽  
Transmission Electron ◽  
Column Adsorption

Column adsorption of the As (III) & As (V) using rice husk mediated carbon embedded silica (CES) and zeolite (Z-RHA) has been proved promising technique rather than the other conventional methods. The present work investigates the adsorption capability of newly manufactured CES and Z-RHA to remove As (III) & As (V) from aqueous solutions. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray (EDX), and Transmission electron microscopy (TEM) analysis have been investigated for the characterization of synthesized materials. The effects of different parameters like initial concentrations, column diameter, column height, particle size distribution have been investigated. The maximum removal efficiency of CES adsorbents for As (III) is 98% and for As (V) is 85%, and of Z-RHA for As (III) is 95% and for As (V) is 92%. To describe the adsorption behavior the Langmuir and Freundlich isotherm models as well as to kinetics models like Adam-Bohart, Thomas, and Yoon Nelson model were applied. Finally, to dispose of the rice husk mediated adsorbents after arsenic treatment solidification has been done.

scholarly journals Sheet-like Skeleton Carbon Derived from Shaddock Peels with Hierarchically Porous Structures for Ultra-Fast Removal of Methylene Blue

Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2554
Author(s):  
Panlong Dong ◽  
Hailin Liu ◽  
Shengrui Xu ◽  
Changpo Chen ◽  
Suling Feng ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Adsorption Process ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Hierarchically Porous ◽  
Column Adsorption

To remove the pollutant methylene blue (MB) from water, a sheet-like skeleton carbon derived from shaddock peels (SPACs) was prepared by NaOH activation followed by a calcination procedure under nitrogen protection in this study. Characterization results demonstrated that the as-prepared SPACs displayed a hierarchically porous structure assembled with a thin sheet-like carbon layer, and the surface area of SPAC-8 (activated by 8 g NaOH) was up to 782.2 m2/g. The as-prepared carbon material presented an ultra-fast and efficient adsorption capacity towards MB due to its macro-mesoporous structure, high surface area, and abundant functional groups. SPAC-8 showed ultrafast and efficient removal capacity for MB dye. Adsorption equilibrium was reached within 1 min with a removal efficiency of 99.6% at an initial concentration of 100 mg/g under batch adsorption model conditions. The maximum adsorption capacity for MB was up to 432.5 mg/g. A pseudo-second-order kinetic model and a Langmuir isotherm model described the adsorption process well, which suggested that adsorption rate depended on chemisorption and the adsorption process was controlled by a monolayer adsorption, respectively. Furthermore, column adsorption experiments showed that 96.58% of MB was removed after passing through a SPAC-8 packed column with a flow rate of 20 mL/min, initial concentration of 50 mg/L, and adsorbent dosage of 5 mg. The as-prepared adsorbent displays potential value in practical applications for dye removal due to its ultrafast and efficient adsorption capacity.

scholarly journals Comparative Removal of Lead and Nickel Ions onto Nanofibrous Sheet of Activated Polyacrylonitrile in Batch Adsorption and Application of Conventional Kinetic and Isotherm Models

Membranes ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Muhammad Tahir Amin ◽  
Abdulrahman Ali Alazba ◽  
Muhammad Shafiq
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Optimum Dose ◽  
Infrared Spectrometry ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Data

We investigated the adsorption of lead (Pb2+) and nickel (Ni2+) ions by electrospun membranes of polyacrylonitrile (PAN) nanofiber activated with NaHCO3 (PANmod). Analysis by Fourier-transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray spectroscopy (EDX) validated the functionalization of PAN nanofibers with NaHCO3, and the successful agglomeration of Pb2+ and Ni2+ onto PANmod. After a rapid uptake of the heavy metal ions (15 min), the equilibrium contact time was attained (60 min) following a linear increase of both adsorption capacity and removal efficiency. PANmod showed a better affinity for Ni2+ than Pb2+. The adsorption on PANmod was best described by the pseudo-second-order kinetic model for both studied models, supporting chemisorption. By varying the solution pH from 2.0 to 9.0, we found that the adsorption capacity followed an increasing trend, reaching a maximum at the pH of 7.0. Despite increasing adsorption capacities, the removal efficiency of both heavy metal ions exhibited a decreasing trend with increase in initial concentrations. The amount of PANmod directly affects the removal efficiency, with 0.7 and 0.2 g being the optimum dose for maximum uptake of Pb2+ and Ni2+, respectively. The Langmuir model fitted well the Pb2+ adsorption data suggesting monolayer adsorption, and the Freundlich model perfectly fitted the Ni2+ adsorption data, indicating heterogeneous adsorption. The estimated values of the mean free energy of adsorption in the D–R isotherm indicated a physical adsorption of both heavy metal ions into the surface of the PANmod.

scholarly journals Arsenic Removal from Water by Adsorption onto Iron Oxide/Nano-Porous Carbon Magnetic Composite

2019 ◽  
Vol 9 (18) ◽  
pp. 3732 ◽  
Author(s):  
Sahira Joshi ◽  
Manobin Sharma ◽  
Anshu Kumari ◽  
Surendra Shrestha ◽  
Bhanu Shrestha
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Sugarcane Bagasse ◽  
Contact Time ◽  
Arsenic Removal ◽  
Chemical Activation ◽  
Batch Adsorption ◽  
Magnetic Composite ◽  
One Pot ◽  
Magnetic Fe3o4

This study aimed to develop magnetic Fe3O4/sugarcane bagasse activated carbon composite for the adsorption of arsenic (III) from aqueous solutions. Activated carbon (AC) was prepared from sugarcane bagasse by chemical activation using H3PO4 as an activating agent at 400 °C. To enhance adsorption capacity for arsenic, the resultant AC was composited with Fe3O4 particles by facile one-pot hydrothermal treatment. This method involves mixing the AC with aqueous solution of iron (II) chloride tetrahydrate, polyvinyl pyrrolidone (PVP), and ethanol. Batch adsorption experiments were conducted for the adsorption of As (III) onto the composite. The effects of pH, adsorbent dosage, and contact time on the arsenic adsorption were studied. The result showed that the composite could remove the arsenic from the water far more effectively than the plain AC. The highest percentage of arsenic removal was found at pH at 8, adsorbent dose of 1.8 g/L, and contact time of 60 min. Langmuir and Freundlich adsorption isotherm was used to analyze the equilibrium experimental data. Langmuir model showed the best fit compared to the Freundlich model with a maximal capacity of 6.69 mg/g. These findings indicated that magnetic Fe3O4/sugarcane bagasse AC composite could be potentially applied for adsorptive removal of arsenic (III) from aqueous solutions.

scholarly journals Examination of the Effectiveness of Physical and Chemical Activation of Natural Bentonite for the Removal of Heavy Metal Ions from Aqueous Solutions

2002 ◽  
Vol 20 (2) ◽  
pp. 151-167 ◽  
Author(s):  
Fawzi Banat ◽  
Sameer Al-Asheh ◽  
Leena Abu-Aitah
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Chemical Activation ◽  
Sodium Dodecyl ◽  
Batch Adsorption ◽  
Initial Material ◽  
Solution Ph ◽  
Experimental Conditions ◽  
Activated Bentonite

The ability of physically and chemically activated bentonite to adsorb copper and nickel ions from aqueous solutions was examined under various experimental conditions. Physically activated bentonite was obtained by thermal treatment of the initial material in an oven at 700°C (T-bentonite), while chemically activated bentonite was obtained in two ways, either by treatment of the initial material with sodium dodecyl sulphate (SDS) as an anionic surfactant to give SDS-bentonite or with aluminium hydroxypolycation as a pillaring agent to give Al-bentonite. Batch adsorption tests were undertaken to study the removal of Cu2+ and Ni2+ ions from aqueous solutions using the above-mentioned types of activated bentonite. The adsorption capacity of the bentonites towards both Cu2+ and Ni2+ ions followed the order: Al-bentonite > SDS-bentonite > T-bentonite > natural bentonite. The initial metal concentration, solution pH, temperature and salinity of the solution affected the adsorption capacity towards both metal ions. The uptake of Cu2+ ions increased with an increase in temperature (25–45°C) as well as with an increase in the initial pH of the solution (3–5). The uptake of Cu2+ and Ni2+ ions decreased significantly with an increase in the NaCl and KCl concentrations present in the aqueous solution. Sulphuric acid of 0.1 M concentration was found to be an effective desorbent for bentonite laden with heavy metals.

Sign in / Sign up

Export Citation Format

Share Document