scholarly journals An Integrated Detection Based on a Multi-Parameter Plasmonic Optical Fiber Sensor

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 803
Author(s):  
Gongli Xiao ◽  
Zetao Ou ◽  
Hongyan Yang ◽  
Yanping Xu ◽  
Jianyun Chen ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Refractive Index ◽  
Gold Film ◽  
Optical Fiber Sensor ◽  
Fem Simulation ◽  
Critical Parameters ◽  
Polished Surface ◽  
Temperature Sensitive ◽  
Temperature Detection ◽  
Integrated Detection

In this paper, a multi-parameter integrated detection photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) is proposed for its application in detecting temperature, magnetic field, and refractive index. The air holes on both sides of the fiber core were coated with gold film and introduced to the temperature-sensitive medium (PDMS) and magnetic fluid (MF), detecting temperature and magnetic field, respectively. The graphene layer is also presented on the gold film of the D-type side polished surface to improve the sensor sensitivity. The sensor’s critical parameters’ influence on its performance is investigated using a mode solver based on the finite element method (FEM). Simulation results show when the samples refractive index (RI) detection is a range of 1.36~1.43, magnetic field detection is a range of 20~550 Oe, and the temperature detection is a range of 5~55 °C; the maximum sensor’s sensitivity obtains 76,000 nm/RIU, magnetic field intensity sensitivity produces 164.06 pm/Oe, and temperature sensitivity obtains −5001.31 pm/°C.

scholarly journals Fabrication of a Bare Optical Fiber-Based Biosensor

Micromachines ◽  
2019 ◽  
Vol 10 (8) ◽  
pp. 522
Author(s):  
Yu-Jun Zhang ◽  
Jin-Cherng Hsu ◽  
Jia-Huey Tsao ◽  
Yung-Shin Sun
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Gold Film ◽  
Optical Fiber Sensor ◽  
Binding Kinetics ◽  
Fiber Sensor ◽  
Sensor Surface ◽  
Material Interface ◽  
Kinetics Of

A bare optical fiber-based biosensor is proposed for measuring the refractive index of different liquids and the binding kinetics of biomolecules to the sensor surface. This optical fiber sensor is based on the Kretschmann’s configuration to attain total internal reflection (TIR) for surface plasmon resonance (SPR) excitation. One end of the bare optical fiber is coated with a gold film. By guiding the light source from the other end into the optical fiber, the light is reflected from the gold-deposited end and the surface evanescent wave is excited in the gold film-transparent material interface. Methanol and ethanol solutions with different refractive indices are used for measuring the corresponding changes in the peak values of the spectra and calculating the corresponding sensitivities. These values are experimentally determined to be in the order of 10−4~10−5 refractive index unit (RIU). Binding of proteins onto the sensor surface is also monitored in real time to obtain the binding kinetics. We believe that, in the future, this optical fiber sensor can serve as a useful biosensor for in situ measurement of allergens, antibody–antigen interactions, and even circulating tumor cells in the blood.

scholarly journals High-sensitivity temperature sensor based on photonic crystal fiber fully coated with gold and PDMS films.

2021 ◽  
Author(s):  
yuhui feng ◽  
shuguang li ◽  
hongyu li ◽  
xiaojian meng ◽  
mengqiang li
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Temperature Sensor ◽  
Gold Film ◽  
Fem Simulation ◽  
Temperature Response ◽  
High Sensitivity ◽  
Temperature Sensitive ◽  
Pdms Layer ◽  
Crystal Fiber

Abstract This paper presented a high-sensitivity temperature sensor based on photonic crystal fiber fully coated with gold and PDMS films. For the convenience of production, gold film is coated outside the fiber cladding, and it is used to excite the surface plasmon resonance (SPR) effect. In addition, the temperature response has been effectively improved by depositing poly-dimethylsiloxane (PDMS) layer outside the gold film. This fully coated structure on the outside of PCF enables temperature-sensitive medium to be in direct contact with the environment, which reduces the difficulty of internal coating and filling. The influences of the parameters on the sensing characteristics are investigated by using the finite element method (FEM). Simulation results show that the average temperature sensitivity is up to 9.287 nm/℃ in the range of -20℃-40℃. Moreover, compared with other designs, the optimized process of structure in this study provides an effective method, which shows a wide application prospect to overcome the difficulty of filling liquid in the air holes.

Effect of external magnetic field on lane formation in driven pair-ion plasmas

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Swati Baruah ◽  
U. Sarma ◽  
R. Ganesh
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Field Strength ◽  
Electric Field ◽  
Electric Field Strength ◽  
Coupling Parameter ◽  
Critical Parameters ◽  
Coulomb Coupling ◽  
Lane Formation ◽  
Parameter Values

Lane formation dynamics in externally driven pair-ion plasma (PIP) particles is studied in the presence of external magnetic field using Langevin dynamics (LD) simulation. The phase diagram obtained distinguishing the no-lane and lane states is systematically determined from a study of various Coulomb coupling parameter values. A peculiar lane formation-disintegration parameter space is identified; lane formation area extended to a wide range of Coulomb coupling parameter values is observed before disappearing to a mixed phase. The different phases are identified by calculating the order parameter. This and the critical parameters are calculated directly from LD simulation. The critical electric field strength value above which the lanes are formed distinctly is obtained, and it is observed that in the presence of the external magnetic field, the PIP system requires a higher value of the electric field strength to enter into the lane formation state than that in the absence of the magnetic field. We further find out the critical value of electric field frequency beyond which the system exhibits a transition back to the disordered state and this critical frequency is found as an increasing function of the electric field strength in the presence of an external magnetic field. The movement of the lanes is also observed in a direction perpendicular to that of the applied electric and magnetic field directions, which reveals the existence of the electric field drift in the system under study. We also use an oblique force field as the external driving force, both in the presence and absence of the external magnetic field. The application of this oblique force changes the orientation of the lane structures for different applied oblique angle values.

scholarly journals Gold Enhanced Hemoglobin Interaction in a Fabry–Pérot Based Optical Fiber Sensor for Measurement of Blood Refractive Index

2018 ◽  
Vol 36 (4) ◽  
pp. 1118-1124 ◽  
Author(s):  
Charusluk Viphavakit ◽  
Sinead O Keeffe ◽  
Minghong Yang ◽  
Stefan Andersson-Engels ◽  
Elfed Lewis
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Fiber Sensor ◽  
Fabry Perot

Development of an Optical Fiber Sensor with a D-shaped Fiber Bragg Grating Integrated in a Loop-mirror Optical Fiber Laser as a High Sensitivity Refractometer

2021 ◽  
Vol 32 ◽  
Author(s):  
Binh Pham Thanh ◽  
Thuy Van Nguyen ◽  
Van Hoi Pham ◽  
Huy Bui ◽  
Thi Hong Cam Hoang ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Fiber Laser ◽  
Fiber Bragg Grating ◽  
Limit Of Detection ◽  
Optical Fiber Sensor ◽  
High Sensitivity ◽  
Optical Signal ◽  
Bragg Grating ◽  
Loop Mirror

In this paper, we report a new type of refractometer based on a D-shaped fiber Bragg grating (FBG) integrated in a loop-mirror optical fiber laser. This proposed sensor is used in wavelength interrogation method, in which the D-shaped FBG is applied as a refractive index (RI) sensing probe and a mirror to select mode of laser. The D-shaped FBG is prepared by the removal of a portion of the fiber cladding covering the FBG by means of side-polishing technique. The D-shaped FBG sensing probe integrated in a loop-mirror optical fiber laser with saturated pump technique, the characteristics of sensing signals have been improved to obtain stable intensity, narrower bandwidth and higher optical signal-to-noise ratio compare to normal reflection configuration. The limit of detection (LOD) of this sensor can be achieved to 2.95 x 10-4 RIU in the refractive index (RI) range of 1.42-1.44. Accordingly, we believe that the proposed refractometer has a huge potential for applications in biochemical-sensing technique.

scholarly journals Plasmonic Refractive Index Sensors Based on One- and Two-Dimensional Gold Grating on a Gold Film

2020 ◽  
Vol 10 (4) ◽  
pp. 375-386 ◽  
Author(s):  
Jiankai Zhu ◽  
Xiangxian Wang ◽  
Yuan Wu ◽  
Yingwen Su ◽  
Tianxu Jia ◽  
...  
Keyword(s):  
Refractive Index ◽  
Composite Structure ◽  
Composite Structures ◽  
Gold Film ◽  
Grating Period ◽  
Two Dimensional ◽  
Period Range ◽  
Refractive Index Sensing ◽  
Resonance Modes ◽  
Comparison Results

Abstract In this paper, we propose two kinds of composite structures based on the one- and two-dimensional (1D&2D) gold grating on a gold film for plasmonic refractive index sensing. The resonance modes and sensing characteristics of the composite structures are numerically simulated by the finite-difference time-domain method. The composite structure of the 1D gold semi-cylinder grating and gold film is analyzed first, and the optimized parameters of the grating period are obtained. The sensitivity and figure of merit (FOM) can reach 660RIU/nm and 169RIU−1, respectively. Then, we replace the 1D grating with the 2D gold semi-sphere particles array and find that the 2D grating composite structure can excite strong surface plasmon resonance intensity in a wider period range. The sensitivity and FOM of the improved composite structure can reach 985RIU/nm and 298 RIU−1, respectively. At last, the comparison results of the sensing performance of the two structures are discussed. The proposed structures can be used for bio-chemical refractive index sensing.

Metamaterials from Amorphous Ferromagnetic Microwires: Interaction between Microwires

2009 ◽  
Vol 152-153 ◽  
pp. 357-360 ◽  
Author(s):  
Andrei V. Ivanov ◽  
A.N. Shalygin ◽  
V.Yu. Galkin ◽  
A.V. Vedyayev ◽  
V.A. Ivanov
Keyword(s):  
Magnetic Field ◽  
Refractive Index ◽  
Optical Properties ◽  
External Magnetic Field ◽  
Electromagnetic Waves ◽  
Negative Refractive Index ◽  
Magnus Effect ◽  
Amorphous Ferromagnet ◽  
Wide Scale ◽  
Optical Magnus Effect

For inhomogeneous mediums the оptical Magnus effect has been derived. The metamaterials fabricated from amorphous ferromagnet Co-Fe-Cr-B-Si microwires are shown to exhibit a negative refractive index for electromagnetic waves over wide scale of GHz frequencies. Optical properties and optical Magnus effect of such metamaterials are tunable by an external magnetic field.

Design of Plane Magnetic Field Image Drawing System Based on PLC Motion Control

2014 ◽  
Vol 525 ◽  
pp. 282-286
Author(s):  
Jia Xin You ◽  
Hui Min Liang ◽  
Kun Zhang ◽  
Guo Fu Zhai
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Motion Control ◽  
Fem Simulation ◽  
Servo Control ◽  
Programmable Logic ◽  
Magnetic Powder ◽  
Fem Model ◽  
Drawing System ◽  
The Magnetic Field

The image of magnetic field is traditionally obtained by spreading magnetic powder manually or by sparse arrays of magnetic needles, obtaining the images of the magnetic field in different permanent magnet shapes and do repeated tests on the permanent magnet are in need. Based on programmable logic controller (PLC) motion control, the servo control and mechanical system have been built, the control strategy is discussed and the software is programmed. 2D FEM model of a test permanent magnet bar is built. Compared with the FEM simulation results, the system has achieved the goal that spreading magnetic powder quickly and evenly in the appointed area.

scholarly journals Enhanced Plasmonic Resonance Characteristics of AgNRs–Gold Film Hybrid System

2021 ◽  
Vol 8 ◽  
Author(s):  
Yanping Yin ◽  
Jin Zhu ◽  
Zaoji Wang ◽  
Guojun Ma ◽  
Huining Yuan ◽  
...  
Keyword(s):  
Refractive Index ◽  
Aspect Ratio ◽  
Gold Film ◽  
Spectral Response ◽  
Surrounding Medium ◽  
Resonance Wavelength ◽  
Spectral Shift ◽  
Refractive Index Sensor ◽  
Gap Size ◽  
Refractive Index Sensitivity

In recent years, the plasma gap resonance maintained by metal-film-coupled nanostructures has attracted extensive attention. This mainly originates from its flexible control of the spectral response and significantly enhanced field strength at the nanoparticle–film junction. In the present study, the tunability of local surface plasmon resonances (LSPRs) of nanorods coupled to a gold film is studied theoretically. To this end, the plasmonic resonances in the nanostructure of individual silver nanorod–gold film (AgNR-film) with different parameters are investigated. Obtained results show that the refractive index sensitivity (S) of nanostructures to the environment increases as the aspect ratio (Ar) of nanostructures increase. It is found that when the aspect ratio (Ar) is set to 3.5, the figure of merit (FOM) is the highest. Moreover, the variation in the gap distances of the nanorod monomer–gold film, electric field distribution of nanorods dimer, and the corresponding impact on the gold film are studied. It is concluded that the gap size of nanostructures has an exponential correlation with the resonance wavelength. Considering the remarkable influence of the gap size and the surrounding medium environment on the spectral shift of AgNR-film nanostructures, potential applications of the structure as a refractive index sensor and biomolecule measurement are proposed.

Sign in / Sign up

Export Citation Format

Share Document