scholarly journals Acoustic Power Measurement and Thermal Bioeffect Evaluation of Therapeutic Langevin Transducers

Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 624
Author(s):  
Jinhyuk Kim ◽  
Jungwoo Lee
Keyword(s):  
Temperature Rise ◽  
Thermal Ablation ◽  
Ultrasonic Transducer ◽  
Average Power ◽  
Acoustic Power ◽  
Acoustic Energy ◽  
Power Measurement ◽  
Maximum Temperature ◽  
Experimental Investigations ◽  
Driving Voltage

We recently proposed an analytical design method of Langevin transducers for therapeutic ultrasound treatment by conducting parametric study to estimate the effect of compression force on resonance characteristics. In this study, experimental investigations were further performed under various electrical conditions to observe the acoustic power of the fully equipped transducer and to assess its heat-related bioeffect. Thermal index (TI) tests were carried out to examine temperature rise and thermal damage induced by the acoustic energy in fatty porcine tissue. Acoustic power emission, TI values, temperature characteristics, and depth/size of thermal ablation were measured as a function of transducer’s driving voltage. By exciting the transducer with 300 Vpp sinusoidal continuous waveform, for instance, the average power was 23.1 W and its corresponding TI was 4.1, less than the 6 specified by the Food and Drug Administration (FDA) guideline. The maximum temperature and the depth of the affected site were 74.5 °C and 19 mm, respectively. It is shown that thermal ablation is likely to be more affected by steep heat surge for a short duration rather than by slow temperature rise over time. Hence, the results demonstrate the capability of our ultrasonic transducer intended for therapeutic procedures by safely interrogating soft tissue and yet delivering enough energy to thermally stimulate the tissue in depth.

Modeling temperature rise in multi-track reciprocating frictional sliding

2021 ◽  
pp. 135065012098823
Author(s):  
Thierry A Blanchet
Keyword(s):  
Temperature Rise ◽  
Peclet Number ◽  
Maximum Temperature ◽  
Uniform Heat Flux ◽  
Heat Accumulation ◽  
Stroke Length ◽  
Péclet Number ◽  
Maximum Temperature Rise ◽  
Rectangular Patch ◽  
Accumulation Effect

As in various manufacturing processes, in sliding tests with scanning motions to extend the sliding distance over fresh countersurface, temperature rise during any pass is bolstered by heating during prior passes over neighboring tracks, providing a “heat accumulation effect” with persisting temperature rises contributing to an overall temperature rise of the current pass. Conduction modeling is developed for surface temperature rise as a function of numerous inputs: power and size of heat source; speed and stroke length, and track increment of scanning motion; and countersurface thermal properties. Analysis focused on mid-stroke location for passes of a square uniform heat flux sufficiently far into the rectangular patch being scanned from the first pass at its edge that steady heat accumulation effect response is adopted, focusing on maximum temperature rise experienced across the pass' track. The model is non-dimensionalized to broaden the applicability of the output of its runs. Focusing on practical “high” scanning speeds, represented non-dimensionally by Peclet number (in excess of 40), applicability is further broadened by multiplying non-dimensional maximum temperature rise by the square root of Peclet number as model output. Additionally, investigating model runs at various non-dimensional speed (Peclet number) and reciprocation period values, it appears these do not act as independent inputs, but instead with their product (non-dimensional stroke length) as a single independent input. Modified maximum temperature rise output appears to be a function of only two inputs, increasing with decreasing non-dimensional values of stroke length and scanning increment, with outputs of models runs summarized compactly in a simple chart.

Acoustic Radiation From Thick Laminated Cylindrical Shells With Sparse Cross Stiffeners

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Xiongtao Cao ◽  
Chao Ma ◽  
Hongxing Hua
Keyword(s):  
Cylindrical Shell ◽  
Radial Displacement ◽  
Acoustic Radiation ◽  
Periodic Structures ◽  
Cylindrical Shells ◽  
Acoustic Power ◽  
Acoustic Energy ◽  
Parallel Plates ◽  
Wavenumber Domain ◽  
Laminated Cylindrical Shells

A general method for predicting acoustic radiation from multiple periodic structures is presented and a numerical solution is proposed to find the radial displacement of thick laminated cylindrical shells with sparse cross stiffeners in the wavenumber domain. Although this method aims at the sound radiation from a single stiffened cylindrical shell, it can be easily adapted to analyze the vibrational and sound characteristics of two concentric cylindrical shells or two parallel plates with complicated periodic stiffeners, such as submarine and ship hulls. The sparse cross stiffeners are composed of two sets of parallel rings and one set of longitudinal stringers. The acoustic power of large cylindrical shells above the ring frequency is derived in the wavenumber domain on the basis of the fact that sound power is focused on the acoustic ellipse. It transpires that a great many band gaps of wave propagation in the helical wave spectra of the radial displacement for stiffened cylindrical shells are generated by the rings and stringers. The acoustic power and input power of stiffened antisymmetric laminated cylindrical shells are computed and compared. The acoustic energy conversion efficiency of the cylindrical shells is less than 10%. The axial and circumferential point forces can also produce distinct acoustic power. The radial displacement patterns of the antisymmetric cylindrical shell with fluid loadings are illustrated in the space domain. This study would help to better understand the main mechanism of acoustic radiation from stiffened laminated composite shells, which has not been adequately addressed in its companion paper (Cao et al., 2012, “Acoustic Radiation From Shear Deformable Stiffened Laminated Cylindrical Shells,” J. Sound Vib., 331(3), pp. 651-670).

Simulating Ultrasound Piezoelectric Power Transfer in the Near Field and Experimental Validations

2021 ◽  
Vol 05 ◽  
Author(s):  
Ammar Mohammed ◽  
Changki Mo ◽  
John Miller ◽  
David Lowry ◽  
Jassim Alhamid
Keyword(s):  
Energy Transfer ◽  
Lead Zirconate Titanate ◽  
Near Field ◽  
Acoustic Power ◽  
Acoustic Energy ◽  
Transfer Efficiency ◽  
Ultrasonic Power ◽  
Power Transfer ◽  
Piezoelectric Energy ◽  
Power Transfer Efficiency

Background: Acoustic power transfer is a method for wireless energy transfer to implanted medical devices that permits a greater range of separation between transmitter and receiver than is possible with inductive power transfer. In some cases, short-distance ultrasonic power transfer may be employed; consequently, their operation may be complicated by the near-field aspects of piezoelectric acoustic energy transfer. Methods: A piezoelectric energy transfer system consisting of two lead zirconate titanate (PZT) transducers was analyzed in this work using a combination of experimental measurements and computer simulations. Results: Simulations using the COMSOL Software package showed good agreement with a measured output voltage as a function of the distance between and alignment of the transmitter and receiver with water as a medium. We also simulated how operating frequency affects power transfer efficiency at various distances between the transmitter and receiver and found reasonable agreement with experiments. We report model predictions for power transfer efficiency as a function of the thickness and diameter of the transmitter and receiver. Conclusion: The results show that with proper choice of parameters, piezoelectric systems can provide high power transfer efficiency in the near-field region.

Braking performance of a novel frictional-magnetic compound disc brake for automobiles

2018 ◽  
Vol 233 (10) ◽  
pp. 2443-2454 ◽  
Author(s):  
Yan Yin ◽  
Jiusheng Bao ◽  
Jinge Liu ◽  
Chaoxun Guo ◽  
Tonggang Liu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Temperature Rise ◽  
Friction Material ◽  
Maximum Temperature ◽  
Interface Temperature ◽  
Disc Brake ◽  
Braking Performance ◽  
Maximum Temperature Rise ◽  
Disc Brakes ◽  
Braking Torque

Disc brakes have been applied in various automobiles widely and their braking performance has vitally important effects on the safe operation of automobiles. Although numerous researches have been conducted to find out the influential law and mechanism of working condition parameters like braking pressure, initial braking speed, and interface temperature on braking performance of disc brakes, the influence of magnetic field is seldom taken into consideration. In this paper, based on the novel automotive frictional-magnetic compound disc brake, the influential law of magnetic field on braking performance was investigated deeply. First, braking simulation tests of disc brakes were carried out, and then dynamic variation laws and mechanisms of braking torque and interface temperature were discussed. Furthermore, some parameters including average braking torque, trend coefficient and fluctuation coefficient of braking torque, average temperature, maximum temperature rise, and the time corresponding to the maximum temperature rise were extracted to characterize the braking performance of disc brakes. Finally, the influential law and mechanism of excitation voltage on braking performance were analyzed through braking simulation tests and surface topography analysis of friction material. It is concluded that the performance of frictional-magnetic compound disc brake is prior to common brake. Magnetic field is greatly beneficial for improving the braking performance of frictional-magnetic compound disc brake.

scholarly journals Revisiting the Effect of Slag in Reducing Heat of Hydration in Concrete in Comparison to Other Supplementary Cementitious Materials

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1847 ◽  
Author(s):  
Hoon Moon ◽  
Sivakumar Ramanathan ◽  
Prannoy Suraneni ◽  
Chang-Seon Shon ◽  
Chang-Joon Lee ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Temperature Rise ◽  
Adiabatic Calorimetry ◽  
Blast Furnace Slag ◽  
Isothermal Calorimetry ◽  
Heat Of Hydration ◽  
Supplementary Cementitious Materials ◽  
Maximum Temperature ◽  
Mass Concrete ◽  
Furnace Slag

Blast furnace slag (SL) is an amorphous calcium aluminosilicate material that exhibits both pozzolanic and latent hydraulic activities. It has been successfully used to reduce the heat of hydration in mass concrete. However, SL currently available in the market generally experiences pre-treatment to increase its reactivity to be closer to that of portland cement. Therefore, using such pre-treated SL may not be applicable for reducing the heat of hydration in mass concrete. In this work, the adiabatic and semi-adiabatic temperature rise of concretes with 20% and 40% SL (mass replacement of cement) containing calcium sulfate were investigated. Isothermal calorimetry and thermal analysis (TGA) were used to study the hydration kinetics of cement paste at 23 and 50 °C. Results were compared with those with control cement and 20% replacements of silica fume, fly ash, and metakaolin. Results obtained from adiabatic calorimetry and isothermal calorimetry testing showed that the concrete with SL had somewhat higher maximum temperature rise and heat release compared to other materials, regardless of SL replacement levels. However, there was a delay in time to reach maximum temperature with increasing SL replacement level. At 50 °C, a significant acceleration was observed for SL, which is more likely related to the pozzolanic reaction than the hydraulic reaction. Semi-adiabatic calorimetry did not show a greater temperature rise for the SL compared to other materials; the differences in results between semi-adiabatic and adiabatic calorimetry are important and should be noted. Based on these results, it is concluded that the use of blast furnace slag should be carefully considered if used for mass concrete applications.

scholarly journals Thermal Analysis of AlGaN/GaN HEMTs Considering Anisotropic And Inhomogeneous Thermal Conductivity

2021 ◽  
Author(s):  
Yao Li ◽  
Zixuan Zheng ◽  
Qun Li ◽  
Hongbin Pu
Keyword(s):  
Thermal Conductivity ◽  
Temperature Rise ◽  
Power Dissipation ◽  
Thermal Characteristics ◽  
Maximum Temperature ◽  
Base Temperature ◽  
Initial Growth ◽  
Boltzmann Transport ◽  
Growth Interface ◽  
Anisotropic Thermal Conductivity

Abstract To examine the differences of thermal characteristics introduced by material thermal conductivity, anisotropic polycrystalline diamond (PCD) and GaN are analyzed based on the accurate model of grain sizes in the directions of parallel and vertical to the interface and an approximate solution of the phonon Boltzmann transport equation. Due to the space-variant grain structures of PCD, the inhomogeneous-anisotropic local thermal conductivity, homogeneous-anisotropic thermal conductivity averaged over the whole layer and the typical values of inhomogeneous-isotropic thermal conductivity are compared with/without anisotropic GaN thermal conductivity. The results show that the considerations of inhomogeneous-anisotropic PCD thermal conductivity and anisotropic GaN thermal conductivity are necessary for the accurate prediction of temperature rise in the GaN HEMT devices, and when ignoring both, the maximum temperature rise is undervalued by over 16 K for thermal boundary resistance (TBR) of 6.5 to 60 m2K/GW at power dissipation of 10 W/mm. Then the dependences of channel temperature on several parameters are discussed and the relations of thermal resistance with power dissipation are extracted at different base temperature. Compared with GaN, SiC and Si substrates, PCD is the most effective heat spreading layer though limited by the grain size at initial growth interface.

scholarly journals Experimental investigations of the processes in gas generator of hydrogen-air energy storage

2021 ◽  
Vol 2039 (1) ◽  
pp. 012007
Author(s):  
N I Chukhin ◽  
A I Schastlivtsev
Keyword(s):  
Energy Storage ◽  
Turbine Unit ◽  
Cooling System ◽  
Average Power ◽  
Experimental Investigations ◽  
Gas Temperature ◽  
Gas Generator ◽  
Gas Turbine Unit ◽  
Accumulation System ◽  
Generator Unit

Abstract This paper describes the results of experimental investigation of the sample of the hydrogen-air gas generator unit with the expected average power of 65 kW. In total 5 test runs were made. Two tests showed that the mass flow and outlet gas temperature was in an agreement with the designed parameters. Additional attention should be paid to the cooling system design for the combustion chamber. In future such a gas generator in couple with the suitable gas turbine unit could be a part of the renewable energy accumulation system e.g. of hydrogen-air energy storage.

scholarly journals 2 Performance Evaluation of Code Division Multiple Access (CDMA) in terms of Power Measurement and Reduction

2011 ◽  
Vol 1 (1) ◽  
pp. 4
Author(s):  
Syed Rizwan-ul- Hasan ◽  
Shakil Ahmed
Keyword(s):  
Performance Evaluation ◽  
Code Division Multiple Access ◽  
Multiple Access ◽  
Average Power ◽  
Power Measurement ◽  
Cdma System ◽  
Power Ratio ◽  
Ratio Measurement ◽  
Simulation Results ◽  
Code Division Multiple

 In this research paper the performance of the CDMA system has been analyzed with respect to PAPR (Peak to Average Power Ratio) measurement and its reduction. Simulation results verify that high peaks degrade the performance of CDMA, application of codes reduced high peaks and PAPR is a good measure for CDMA.

Sign in / Sign up

Export Citation Format

Share Document