scholarly journals Opportunities for Improving the Environmental Profile of Silk Cocoon Production under Brazilian Conditions

2020 ◽  
Vol 12 (8) ◽  
pp. 3214
Author(s):  
Silvia Mara Bortoloto Damasceno Barcelos ◽  
Rodrigo Salvador ◽  
Maria da Graça Guedes ◽  
Antonio Carlos de Francisco
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Economic Feasibility ◽  
Raw Material ◽  
Impact Categories ◽  
Cocoon Production ◽  
Silk Cocoon ◽  
Silk Production ◽  
Environmental Profile ◽  
The Impact

Brazilian silk production is amongst the five largest in the world. Nonetheless, there is no life cycle assessment study on silk cocoon production and its upstream processes, pertaining to the mulberry production (fundamental upstream process for silk production), in the existing literature. The objective of this study was to identify opportunities to improve the environmental profile of mulberry and silk cocoon production under Brazilian conditions. To that end, a life cycle assessment was conducted for the core processes of mulberry and silk cocoon production and upstream processes of raw material production, using the ReCiPe method for life cycle impact assessment using nine impact categories. Overall, the mulberry production showed greater impacts than the cocoon production for the impact categories analyzed. A few opportunities for improving the environmental profile of mulberry and silk cocoon production under Brazilian conditions included replacing the Kraft paper used to cover the rearing beds, replacing the standard tractor used to fetch mulberry leaves, replacing light bulbs, conducting a more sustainable mulberry and cocoon production, and setting a reverse logistics system for plastic and paper packaging waste. Nevertheless, many of these measures are long-term strategies. Besides, many of them need further economic feasibility assessment.

scholarly journals Exploring sustainability potentials in vineyards through LCA? Evidence from farming practices in South Africa

2021 ◽  
Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
South African ◽  
Wine Grape ◽  
Impact Categories ◽  
Farming Practices ◽  
Manual Labour ◽  
The Impact

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.

scholarly journals Life Cycle Assessment of Maize-Germ Oil Production and The Use of Bioenergy to Mitigate Environmental Impacts: A Gate-To-Gate Case Study

Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 60 ◽  
Author(s):  
Mattias Gaglio ◽  
Elena Tamburini ◽  
Francesco Lucchesi ◽  
Vassilis Aschonitis ◽  
Anna Atti ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Food Industry ◽  
Renewable Energy Sources ◽  
Environmental Benefits ◽  
Impact Categories ◽  
Industrial Processing ◽  
The Impact

The need to reduce the environmental impacts of the food industry is increasing together with the dramatic increment of global food demand. Circulation strategies such as the exploitation of self-produced renewable energy sources can improve ecological performances of industrial processes. However, evidence is needed to demonstrate and characterize such environmental benefits. This study assessed the environmental performances of industrial processing of maize edible oil, whose energy provision is guaranteed by residues biomasses. A gate-to-gate Life Cycle Assessment (LCA) approach was applied for a large-size factory of Northern Italy to describe: (i) the environmental impacts related to industrial processing and (ii) the contribution of residue-based bioenergy to their mitigation, through the comparison with a reference system based on conventional energy. The results showed that oil refinement is the most impacting phase for almost all the considered impact categories. The use of residue-based bioenergy was found to drastically reduce the emissions for all the impact categories. Moreover, Cumulative Energy Demand analysis revealed that the use of biomass residues increased energy efficiency through a reduction of the total energy demand of the industrial process. The study demonstrates that the exploitation of residue-based bioenergy can be a sustainable solution to improve environmental performances of the food industry, while supporting circular economy.

scholarly journals Life-cycle assessment of decentralized solutions for wastewater treatment in small communities

2021 ◽  
Author(s):  
N. Lourenço ◽  
L. M. Nunes
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Activated Sludge ◽  
Constructed Wetlands ◽  
Economies Of Scale ◽  
Environmental Benefits ◽  
Impact Categories ◽  
Standard Life ◽  
The Impact

Abstract This study benchmarks vermifiltration (VF) as secondary wastewater treatment in three nature-based decentralized treatment plants using life-cycle assessment. The comparison is justified by the comparatively easier and cheaper operation of VF when compared to more traditional technologies, including small rate infiltration (SRI), constructed wetlands (CW), and activated sludge (AS). Standard life cycle assessment was used and applied to three case studies located in southern Europe. Material intensity during construction was highest for VF, but impacts during operation were lower, compensating those of the other phases. Impacts during the construction phase far outweigh those of operation and dismantling for facilities using constructed wetlands and activated sludge, when the number of served inhabitants is small, and due to lack of economies of scale. VF used as secondary treatment was shown to contribute to reducing the environmental impacts, mainly in constructed wetlands and activated sludge. The replacement of CW by VF seems to bring important environmental benefits in most impact categories, in particular in the construction phase. The replacement by VF in facilities with SRI seems to result in the improvement of some of the impact categories, in particular in the operation phase. As for dismantling, no conclusive results were obtained.

A Life Cycle Assessment Study on a New Countertop Material

2021 ◽  
Vol 897 ◽  
pp. 137-142
Author(s):  
Luiza Silva ◽  
Elisabete Silva ◽  
Isabel Brás ◽  
Idalina Domingos ◽  
Dulcineia Wessel ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Scarcity ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Photochemical Oxidation ◽  
Impact Categories ◽  
Product Packaging ◽  
The Impact ◽  
Abiotic Depletion

The Life Cycle Assessment (LCA) is one of the most important analytical tools available to provide the scientific basis of engineering solutions for sustainability. The focus of this study was a LCA (cradle to gate) of a product intended to be used in countertops. The functional unit chosen was 1 m2 of finished panel (countertop) and the boundary system involved the study of raw materials and product packaging and the panel’s production process. The chosen method for impact assessment was EPD (2018) available in SimaPro PhD software and Acidification, Eutrophication, Global Warming, Photochemical Oxidation, Abiotic Depletion (elements), Abiotic Depletion (fossil fuels), Water Scarcity and Ozone Layer Depletion were the impact categories considered. Results showed that the panel’s manufacturing is the process that presented the highest influence in all categories analyzed ranging from 88% on Abiotic Depletion to approximately 101% on Water Scarcity. Polyvinylchloride (PVC) is the greatest contributors to all impact categories except to Photochemical Oxidation that is the Polyester.

scholarly journals Sustainability Estimation of Oat:Pea Intercrops from the Agricultural Life Cycle Assessment Perspective

Agronomy ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2433
Author(s):  
Jaroslav Bernas ◽  
Tereza Bernasová ◽  
Hans-Peter Kaul ◽  
Helmut Wagentristl ◽  
Gerhard Moitzi ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Farming System ◽  
N Fertilization ◽  
Impact Categories ◽  
Yield Level ◽  
N Yield ◽  
Arable Farming ◽  
The Impact

Winter cereal:legume intercropping is considered a sustainable arable farming system not only in temperate regions but also in Mediterranean environments. Previous studies have shown that with suitable crop stand composition, high grain yield can be achieved. In this study, a life cycle assessment (LCA) of the influence of sowing ratio and nitrogen (N) fertilization on grain nitrogen yield of oat (Avena sativa L.) and pea (Pisum sativum L.) in intercrops was performed to find the optimal design to achieve low environmental impact. This study compared the environmental impact of oat:pea intercrops using agricultural LCA. Monocrops of oat and pea and substitutive intercrops, which were fertilized with different levels of N, were compared. The system boundaries included all the processes from cradle to farm gate. Mass-based (grain N yield) and area-based (land demand for generating the same grain N yield) functional units were used. The results covered the impact categories related to the agricultural LCAs. The ReCiPe 2016 Midpoint and Endpoint characterization model was used for the data expression. According to the results, an unfertilized combination of oat and pea (50%:50%) had the lowest environmental impact in comparison with the other 14 assessed variants and selected impact categories. In the assessed framework, pea monocrops or intensively fertilized oat monocrops can also be considered as alternatives with relatively low impact on the environment. However, an appropriate grain N yield must be reached to balance the environmental impact resulting from the fertilizer inputs. The production and use of fertilizers had the greatest impact on the environment within the impact categories climate change, eutrophication, and ecotoxicity. The results indicated that high fertilizer inputs did not necessarily cause the highest environmental impact. In this respect, the achieved grain N yield level, the choice of allocation approach, the functional unit, and the data expression approach played dominant roles.

scholarly journals Evaluation of Environmental Impact of Cement Production in Algeria Using Life Cycle Assessment

2015 ◽  
Vol 45 ◽  
pp. 79-84
Author(s):  
S. Boughrara ◽  
M. Chedri ◽  
K. Louhab
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cement Production ◽  
Dry Process ◽  
The Impact ◽  
Inputs And Outputs

The aim of this study is the use of Life Cycle Assessment, to evaluate the impact generated by cement manufactory situated in Sour EL Ghozlane town in Algeria country, which use the dry process to produce cement Portland. The LCA method is used for compiling and examining the inputs and outputs of energy, raw material and environmental impacts directly attributable to the manufacture and functioning of a product throughout its life. It is also used to determine element and energy contributing to each impact evaluated. Potentials impacts are evaluated using the SimaProV.7.1 software and IMPACT2000+ method in this study.

scholarly journals The impact of the consumer’s decision on the life cycle assessment of organic pasta

2021 ◽  
Vol 3 (11) ◽  
Author(s):  
Anna Elisabeth Gnielka ◽  
Christof Menzel
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Grocery Store ◽  
Impact Categories ◽  
Freshwater Ecotoxicity ◽  
Last Mile ◽  
The Impact ◽  
Freshwater Eutrophication

AbstractEvery consumer’s decision has an impact on the environment, and even basic food products such as pasta have an impact due to their high consumption rates. Factors that can be influenced by the consumer include the preparation (cooking), last mile and packaging phases. The last mile has not been considered in most studies but contributes considerably to the environmental impact of pasta. The three phases and their environmental impact on the life cycle of pasta are analyzed in this cradle-to-grave life cycle assessment. The focus of the study lies on the impact categories climate change, agricultural land occupation, fossil depletion, water depletion, freshwater eutrophication and freshwater ecotoxicity. Inventory data were taken from other studies, were collected in cooperation with a zero-packaging organic grocery store in Germany or were gained in test series. Our results show that the preparation of pasta has the greatest environmental impact (over 40% in the impact categories climate change and fossil depletion and over 50% in the impact category freshwater eutrophication), followed by the last mile (over 20% in the impact categories climate change and fossil depletion) and lastly the packaging (nearly 9% in the impact categories freshwater eutrophication and freshwater ecotoxicity). Based on our study´s results, we provide some recommendations for minimizing the environmental impacts of pasta.

scholarly journals Life Cycle Assessment of an NMC Battery for Application to Electric Light-Duty Commercial Vehicles and Comparison with a Sodium-Nickel-Chloride Battery

2021 ◽  
Vol 11 (3) ◽  
pp. 1160
Author(s):  
Antonella Accardo ◽  
Giovanni Dotelli ◽  
Marco Luigi Musa ◽  
Ezio Spessa
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Nickel Chloride ◽  
Impact Categories ◽  
Commercial Vehicles ◽  
Light Duty ◽  
Electric Light ◽  
The Impact

This paper presents the results of an environmental assessment of a Nickel-Manganese-Cobalt (NMC) Lithium-ion traction battery for Battery Electric Light-Duty Commercial Vehicles (BEV-LDCV) used for urban and regional freight haulage. A cradle-to-grave Life Cycle Inventory (LCI) of NMC111 is provided, operation and end-of-life stages are included, and insight is also given into a Life Cycle Assessment of different NMC chemistries. The environmental impacts of the manufacturing stages of the NMC111 battery are then compared with those of a Sodium-Nickel-Chloride (ZEBRA) battery. In the second part of the work, two electric-battery LDCVs (powered with NMC111 and ZEBRA batteries, respectively) and a diesel urban LDCV are analysed, considering a wide set of environmental impact categories. The results show that the NMC111 battery has the highest impacts from production in most of the impact categories. Active cathode material, Aluminium, Copper, and energy use for battery production are the main contributors to the environmental impact. However, when vehicle application is investigated, NMC111-BEV shows lower environmental impacts, in all the impact categories, than ZEBRA-BEV. This is mainly due to the greater efficiency of the NMC111 battery during vehicle operation. Finally, when comparing BEVs to a diesel LDCV, the electric powertrains show advantages over the diesel one as far as global warming, abiotic depletion potential-fossil fuels, photochemical oxidation, and ozone layer depletion are concerned. However, the diesel LDCV performs better in almost all the other investigated impact categories.

scholarly journals Environmental Life Cycle Assessment of Alternative Fuels for Western Australia’s Transport Sector

Atmosphere ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 398 ◽  
Author(s):  
Najmul Hoque ◽  
Wahidul Biswas ◽  
Ilyas Mazhar ◽  
Ian Howard
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Security ◽  
Alternative Fuels ◽  
Transport Sector ◽  
Impact Categories ◽  
Hydrogen Fuel ◽  
Production Of Hydrogen ◽  
Environmental Life Cycle Assessment ◽  
The Impact

Alternative fuels for the transport sector are being emphasized due to energy security and environmental issues. Possible alternative fuel options need to be assessed to realize their potential to alleviate environmental burdens before policy formulations. Western Australia (WA) is dominated by private cars, accounting for around 72% vehicles with 87% of those using imported gasoline, and resulting in approximately 14% of greenhouse gas (GHG) emissions from the transport sector. There is an urgent need for WA to consider alternative transport fuels not only to reduce the environmental burden but also to avoid future energy security consequences. This study assesses the environmental life cycle assessment (ELCA) of transport fuel options suitable for WA. The study revealed that ethanol (E65), electric (EV) and plug-in electric vehicle (PHEV) options can decrease global warming potential (GWP) by 40%, 29% and 14%, respectively, when compared to gasoline. The EV and PHEV also performed better than gasoline in the fossil fuel depletion (FFD) and water consumption (WC) impact categories. Gasoline, however, demonstrated better environmental performance in all the impact categories compared to hydrogen and that was mainly due to the high electricity requirement during the production of hydrogen. The use of platinum in hydrogen fuel cells and carbon fibre in the hydrogen tank for hydrogen fuel cell vehicles (HFCV) and Li-ion battery for EVs are the most important sources of environmental impacts. The findings of the study would aid the energy planners and decision makers in carrying out a comparative environmental assessment of the locally-sourced alternative fuels for WA.

scholarly journals Aspects of the hydrophobic effect sustainability obtained in plasma for cotton fabrics

2019 ◽  
Vol 70 (03) ◽  
pp. 223-228
Author(s):  
RALUCA MARIA AILENI ◽  
LAURA CHIRIAC ◽  
ADRIANA SUBTIRICA ◽  
SILVIA ALBICI ◽  
LAURENTIU CRISTIAN DINCA
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Hydrophobic Effect ◽  
Raw Material ◽  
Rf Plasma ◽  
Plasma Technology ◽  
Technical Data ◽  
Chemical Substances ◽  
Material Energy ◽  
The Impact

This paper presents several aspects concerning the life cycle assessment (LCA) for 100% cotton fabric treated with different types of Fluor compounds using RF plasma technology and foulard technology, in order to obtain the hydrophobic effect. To highlight the effects obtained by RF (radio frequency) plasma technology was conducted in parallel a study about hydrophobic effect obtained using a dispersion of fluorine compound (NUVA TTC) on foulard. The conclusions of the study were that if we use the plasma treatment for hydrophobic effect then this would influence the environment negatively by warming generated by gases and power consumption, when using the foulard method and chemical substances already established, the impact would consist of increasing the consumption of fossil flues, respiratory inorganics, and climate change. We analyzed the life-cycle inventory (LCI) and life-cycle assessment (LCA) using SimaPro software and Eco-indicator 99. For obtaining the LCI, we used to input and output technical data, from the plasma / foulard process, and the SimaPro software for generating the LCA based on these data. The input data about raw material, energy, chemical substances, have been collected by direct measurements on machinery, device logs and specifications of the equipment (technical books) and processes. The output data (waste energy and chemicals) were obtained using statistics, internet databases, and SimaPro software. The objective of our scientific initiative has been to study the sustainability of the RF plasma technology used for hydrophobization, and we obtained that plasma technology used for hydrophobic effect is less eco-friendly than foulard technology for a functional unit of 1 kg treated material.

Sign in / Sign up

Export Citation Format

Share Document