scholarly journals Analysis of Power Generation for Solar Photovoltaic Module with Various Internal Cell Spacing

2021 ◽  
Vol 13 (11) ◽  
pp. 6364
Author(s):  
June Raymond L. Mariano ◽  
Yun-Chuan Lin ◽  
Mingyu Liao ◽  
Herchang Ay
Keyword(s):  
Power Output ◽  
Spacing Effect ◽  
Photovoltaic Cell ◽  
Standard Test ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Engineering Software ◽  
Internal Cell ◽  
Cell Spacing ◽  
Pv Module

Photovoltaic (PV) systems directly convert solar energy into electricity and researchers are taking into consideration the design of photovoltaic cell interconnections to form a photovoltaic module that maximizes solar irradiance. The purpose of this study is to evaluate the cell spacing effect of light diffusion on output power. In this work, the light absorption of solar PV cells in a module with three different cell spacings was studied. An optical engineering software program was used to analyze the reflecting light on the backsheet of the solar PV module towards the solar cell with varied internal cell spacing of 2 mm, 5 mm, and 8 mm. Then, assessments were performed under standard test conditions to investigate the power output of the PV modules. The results of the study show that the module with an internal cell spacing of 8 mm generated more power than 5 mm and 2 mm. Conversely, internal cell spacing from 2 mm to 5 mm revealed a greater increase of power output on the solar PV module compared to 5 mm to 8 mm. Furthermore, based on the simulation and experiment, internal cell spacing variation showed that the power output of a solar PV module can increase its potential to produce more power from the diffuse reflectance of light.

scholarly journals Modeling of Photovoltaic Module Using the MATLAB

2019 ◽  
Vol 9 ◽  
pp. 59-69
Author(s):  
Alok Dhaundiyal ◽  
Divine Atsu
Keyword(s):  
Standard Test ◽  
Electrical Performance ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Pv Module ◽  
Proposed Model ◽  
Current Voltage ◽  
Pv Modules ◽  
The Impact ◽  
The Mathematical Model

This paper presents the modeling and simulation of the characteristics and electrical performance of photovoltaic (PV) solar modules. Genetic coding is applied to obtain the optimized values of parameters within the constraint limit using the software MATLAB. A single diode model is proposed, considering the series and shunt resistances, to study the impact of solar irradiance and temperature on the power-voltage (P-V) and current-voltage (I-V) characteristics and predict the output of solar PV modules. The validation of the model under the standard test conditions (STC) and different values of temperature and insolation is performed, as well as an evaluation using experimentally obtained data from outdoor operating PV modules. The obtained results are also subjected to comply with the manufacturer’s data to ensure that the proposed model does not violate the prescribed tolerance range. The range of variation in current and voltage lies in the domain of 8.21 – 8.5 A and 22 – 23 V, respectively; while the predicted solutions for current and voltage vary from 8.28 – 8.68 A and 23.79 – 24.44 V, respectively. The measured experimental power of the PV module estimated to be 148 – 152 W is predicted from the mathematical model and the obtained values of simulated solution are in the domain of 149 – 157 W. The proposed scheme was found to be very effective at determining the influence of input factors on the modules, which is difficult to determine through experimental means.

scholarly journals A dynamic model for series and parallel resistance of photovoltaic cell using material properties extraction and energy tunnel

2017 ◽  
Vol 16 (1) ◽  
pp. 9-21
Author(s):  
Kotchapong Sumanonta ◽  
Pasist Suwanapingkarl ◽  
Pisit Liutanakul
Keyword(s):  
Series Resistance ◽  
Photovoltaic Cell ◽  
Photovoltaic Module ◽  
Practical Application ◽  
Pv Module ◽  
Proposed Model ◽  
Outdoor Test ◽  
The Relationship ◽  
Parallel Resistance ◽  
Novel Model

This article presents a novel model for the equivalent circuit of a photovoltaic module. This circuit consists of the following important parameters: a single diode, series resistance (Rs) and parallel resistance (Rp) that can be directly adjusted according to ambient temperature and the irradiance. The single diode in the circuit is directly related to the ideality factor (m), which represents the relationship between the materials and significant structures of PV module such as mono crystalline, multi crystalline and thin film technology.  Especially, the proposed model in this article is to present the simplified model that can calculate the results of I-V curves faster and more accurate than other methods of the previous models. This can show that the proposed models are more suitable for the practical application. In addition, the results of the proposed model are validated by the datasheet, the practical data in the laboratory (indoor test) and the onsite data (outdoor test). This ensures that the less than 0.1% absolute errors of the model can be accepted.

ELECTRICAL BEHAVIOR OF A DOUBLE SIDED PV SOLAR PANEL

2011 ◽  
Vol 2011 (1) ◽  
pp. 000800-000804
Author(s):  
V. Ganescu ◽  
R. Shoaff ◽  
A. Pascu
Keyword(s):  
Thin Film ◽  
Power Output ◽  
Environmental Variables ◽  
Operating Conditions ◽  
Solar Panel ◽  
Back Side ◽  
Solar Pv ◽  
Electrical Behavior ◽  
Pv Module ◽  
Overall Efficiency

An innovative low power (5W) consumer grade dual face PV solar panel assembly is presented in this research. The authors propose capitalizing indirectly on the shadowed face of a typical solar panel by augmenting the panel’s total active area of exposure (via the panel’s “back side” and respective “deflectors”) and aiming at an increase in the overall efficiency of the assembly. Standard environmental operating conditions were taken into account. No CPV were used. The resulting power output profile of this unit is presented in detail and compared with the output of a single sided “standard” solar PV module configuration. In addition, under similar design and operating environmental variables, the behavior of crystalline cells panels is intended to be contrasted with thin film panels’ as variants of this proposed solution.

Modelling and Simulation of Solar Photovoltaic Cell for Different Insolation Values Based on MATLAB/Simulink Environment

2014 ◽  
Vol 550 ◽  
pp. 137-143 ◽  
Author(s):  
S. Narendiran ◽  
Sarat Kumar Sahoo
Keyword(s):  
Photovoltaic Cell ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Electrical Characteristics ◽  
Array Type ◽  
Matlab Simulink ◽  
Photovoltaic Modules ◽  
Pv Module ◽  
Current Input ◽  
In Series

The paper discuss about the modelling and electrical characteristics of photovoltaic cell and its array type of construction in matlab-simulink environment at different insolation levels. The photovoltaic module is modelled using the diode electrical characteristic equation. The photovoltaic cell is analysed by voltage input and current input modules, The voltage and current input photovoltaic modules are simulated with different insolation values by varying the construction of PV modules. The results conclude that the current input PV module is well suited for applications were it shares same current when connected in series and voltage input PV module, where it shares same voltage when connected in parallel.

scholarly journals Impacts of Cloud Cover and Dust on the Performance of Photovoltaic Module in Niamey

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Abdoulatif Bonkaney ◽  
Saïdou Madougou ◽  
Rabani Adamou
Keyword(s):  
Cloud Cover ◽  
Photovoltaic Module ◽  
Energy Yield ◽  
Solar Pv ◽  
Solar Module ◽  
Pv Module ◽  
Long Term Effect ◽  
Daily Energy ◽  
Dust Accumulation

The sensitivity of monocrystalline solar module towards dust accumulation and cloud cover is investigated from May to August 2015 for Niamey’s environment. Two solar modules with the same characteristics have been used to assess the impacts of the dust on the solar PV module. One of the modules is being cleaned every morning and the second one was used for monitoring the effect of dust accumulation onto the surface of the unclean module for May and June. Results show that dust accumulation has a great effect on decreasing the daily energy yield of the unclean module. But this effect is a long-term effect. For the cloud cover, the effect is immediate. It was estimated that exposing the module into the environment in 23 days in June 2015 has reduced the daily energy yield by 15.29%. This limitation makes solar PV an unreliable source of power for remote devices and thus strongly suggests the challenges of cleaning the module’s surface regularly.

scholarly journals Characterization Performance of Monocrystalline Silicon Photovoltaic Module Using Experimentally Measured Data

2019 ◽  
Vol 25 (10) ◽  
pp. 1-19
Author(s):  
Mena Safaa Mohammed ◽  
Emad Talib Hashim
Keyword(s):  
Ambient Temperature ◽  
Solar Irradiance ◽  
Clean Energy ◽  
Monocrystalline Silicon ◽  
Solar Irradiation ◽  
Weather Data ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Solar Module ◽  
Pv Module

Solar photovoltaic (PV) system has emerged as one of the most promising technology to generate clean energy. In this work, the performance of monocrystalline silicon photovoltaic module is studied through observing the effect of necessary parameters: solar irradiation and ambient temperature. The single diode model with series resistors is selected to find the characterization of current-voltage (I-V) and power-voltage (P-V) curves by determining the values of five parameters ( ). This model shows a high accuracy in modeling the solar PV module under various weather conditions. The modeling is simulated via using MATLAB/Simulink software. The performance of the selected solar PV module is tested experimentally for different weather data (solar irradiance and ambient temperature) that is gathered from October 2017 to April 2018 in the city of Baghdad. The collected data is recorded for the entire months during the time which is limited between 8:00 AM and 1:00 PM. This work demonstrates that the change in a cell temperature is directly proportional with the PV module current, while it is inversely proportional with the PV module voltage. Additionally, the output power of a PV module increases with decreasing the solar module temperature. Furthermore, the Simulink block diagram is used to evaluate the influence of weather factors on the PV module temperature by connecting to the MATLAB code. The best value from the results of this work was in March when the solar irradiance was equal to 1000 W/m2 and the results were: Isc,exp=3.015, Isc,mod=3.25 , RE=7.79 and Voc,exp=19.67 ,Voc,mod=19.9 ,RE=1.1

scholarly journals A model for predicting photovoltaic module performances

2019 ◽  
Vol 10 (4) ◽  
pp. 1914
Author(s):  
Nadia Bouaziz ◽  
Arezki Benfdila ◽  
Ahcene Lakhlef
Keyword(s):  
Environmental Parameters ◽  
Operating Conditions ◽  
Solar Irradiation ◽  
Photovoltaic Module ◽  
Physical Parameters ◽  
Solar Pv ◽  
Site Location ◽  
Pv System ◽  
Pv Module ◽  
Mathematical Expressions

The present paper deals with the development of a simulation model for predicting the performances of a solar photovoltaic (PV) system operating under current meteorological conditions at the site location. The proposed model is based on the cell equivalent circuit including a photocurrent source, a diode, a series and shunt resistances. Mathematical expressions developed for modeling the PV generator performances are based on current-voltage characteristic of the considered modules. The developed model allows the prediction of PV cell (module) behavior under different physical and environmental parameters. The model can be extended to extract physical parameters for a given solar PV module as a function of temperature and solar irradiation. A typical 260 W solar panel developed by LG Company was used for model evaluation using Newton-Raphson approach under MATLAB environment in order to analyze its behavior under actual operating conditions. Comparison of our results with data taken from the manufacturer’s datasheet shows good agreement and confirms the validity of our model. Hence, the proposed approach can be an alternative to extract different parameters of any PV module to study and predict its performances.

scholarly journals Modeling of 120W Monocrystalline Photovoltaic Module using MATLAB Simulink

2018 ◽  
Vol 11 (1) ◽  
pp. 74
Author(s):  
Siti Amely Jumaat ◽  
Adhwa Amsyar Syazwan Ab Majid ◽  
Mohd Noor Abdullah ◽  
Nur Hanis Radzi ◽  
Rohaiza Hamdan ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Irradiance ◽  
Standard Test ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
Matlab Simulink ◽  
Pv Module ◽  
Input Parameters ◽  
And Performance

This project aims to model a solar Photovoltaic (PV) Module using MATLAB Simulink. In Renewable Energy (RE) field, many studies have been carried out to determine the level of efficiency and performance of a specific PV module. Therefore, this research will carry out the modeling of the 120W Monocrystalline Photovoltaic Module by Su-Kam Solar using MATLAB Simulink to determine the efficiency and performance. The input parameters that consists of Solar Irradiance (G) and Temperature (T) data will be collected at location 1.8635° N, 103.1089° E which is in Parit Raja, Batu Pahat, Johor. The results are shown in I-V curve and P-V curve and compared with the theory of I-V and P-V curve. Other than that, the PV module have different performance in different value of irradiance and temperature. Lastly, the PV Module is work efficiently and full performance at Standard Test Conditon (STC).

Comparative analysis of NOCT values for mono and multi C-Si PV modules in Indian climatic condition

2015 ◽  
Vol 12 (1) ◽  
pp. 19-22 ◽  
Author(s):  
Suprava Chakraborty ◽  
Rajesh Kumar
Keyword(s):  
Power Output ◽  
Climatic Condition ◽  
Standard Test ◽  
Air Mass ◽  
Pv Module ◽  
Power Modules ◽  
Indian Climatic ◽  
Actual Field ◽  
Photo Voltaic ◽  
Indian Climatic Condition

The power output of Photo-voltaic modules is generally rated at STC (Standard Test Condition), 1000W/m2 irradiance, 25°C temperature and 1.5G Air Mass. But in actual field condition the situation is different from STC. Output of PV module is a function of Irradiance, ambient temperature, wind speed and module temperature. It is well established that power output of PV module decreases with increase of module temperature. So it is important to know the temperature of PV module to determine the reduction in power output due to temperature. Module temperature can be determined if irradiance at that instant and NOCT value of that module is known. This work presents the variation in NOCT value with respect to rated power output of PV module and comparison of NOCT values for same rated power mono and multi crystalline Si modules from various manufacturers. According to this study NOCT value increases with the wattage of PV module. For same rated power modules, NOCT value of mono crystalline Si is more than multi crystalline Si.

Sign in / Sign up

Export Citation Format

Share Document