Enrichment — the way to create a new generation of food products

2020 ◽  
pp. 36-40
Author(s):  
O.V. Sycheva ◽  
V.G. Kayshev

The main dysnutrition of the Russian population is the excess of caloric intake over an indicator of the energy consumption level. One of the ways to solve this problem is the production of functional food products or enriched functional products. The essence of this is that only those micronutrients that are really in short supply should be used in the fortification of products. These should be products of mass consumption, and especially those that undergo refining, which results in the loss of micronutrients. The use of raw materials and ingredients only of natural (animal, vegetable, mineral) origin allows creating active complexes that qualitatively alter the physiological properties of the product and can affect many product characteristics and processes such as physico-chemical, structural, mechanical and organoleptic characteristics of the product, the processes of color formation, fermentation, oxidation, and storage capacity. However, sometimes a strong passion for enriching the product with useful macro- and micronutrients affects the taste characteristics. Therefore, when developing recipes and technologies for new-generation products, it is crucial that the enrichment of the product with important and necessary elements should not deteriorate the organoleptic characteristics. At the same time, it is essential to ensure the safety of products without compromising consumer properties. The diet should contain all the nutrients necessary for a person in sufficient quantities and balanced with each other in the most favorable proportions

2020 ◽  
Vol 12 ◽  
pp. 70-76
Author(s):  
V.G. Kaishev ◽  

Aim. To analyze the scientific and technical literature and identify ways to create a new generation of mass-consumption food products enriched with vital nutrients. Discussion. The main malnutrition of the Russian population is the excess of caloric intake over an indicator of the level of energy consumption. One of the ways to solve this problem is the production of functional food products or enriched functional products. The essence of this is that only those micronutrients that are really in short supply should be used in the fortification of products. These should be products of mass consumption, and especially those that undergo refining, which results in the loss of micronutrients. The use of raw materials and ingredients only of natural (animal, vegetable, mineral) origin, allows you to create active complexes that qualitatively change the physiological properties of the product, and can affect many product characteristics and processes such as physico-chemical, structural-mechanical and organoleptic characteristics of the product, the processes of color formation, fermentation, oxidation, storage capacity. However, sometimes a strong passion for enriching the product with useful macro- and micronutrients affects the taste characteristics. Conclusion. When developing recipes and technologies for new-generation products, it is necessary that the enrichment of the product with important and necessary elements does not worsen the organoleptic characteristics. At the same time, it is necessary to ensure the safety of products without compromising consumer properties. The diet should contain all the necessary nutrients (nutrients) for a person in sufficient quantities and balanced with each other in the most favorable proportions.


1998 ◽  
Vol 19 (2) ◽  
pp. 168-171 ◽  
Author(s):  
Denis Barclay

Diet-related micronutrient deficiencies rarely occur in isolation; deficiencies of iodine and vitamin A or of iron and vitamin A or zinc are often observed in the same populations. In addition, widespread deficiencies of some micronutrients, for example, zinc and calcium, may often go undiagnosed because of the absence of specific and sensitive status indicators. Multiple micronutrient supplementation can be more effective in improving nutritional status than supplementation with single key micronutrients; therefore, the multiple fortification of appropriate food vectors, including beverages, is of interest from the nutritional standpoint. Beverages fortified with multiple micronutrients include dairy products, chocolate beverages, fruit juices, and soya-based drinks. As well as the documented or estimated micronutrient deficiencies and the requirements of the target population or consumer group, the conception of such a multiply fortified beverage must take into account a number of other important factors. The choice of the chemical form of the fortification micronutrients should be made with consideration of bioavailability, the effects on the organoleptic characteristics of the particular beverage, and cost. The initial calculation of the composition of the micronutrient premix should include the levels of micronutrients in the raw materials used and the estimated losses of specific micronutrients during processing and storage. Preliminary production and storage trials are then needed to determine the actual losses. The composition of the micronutrient premix may then be finalized. Interactions, both positive and negative, between fortification micronutrients may also need to be considered. For example, the bioavailability of iron may be enhanced by the addition of vitamin C, whereas mineral–vitamin and vitamin–vitamin interactions can accelerate the destruction of some vitamins. To render quality control procedures simple and cost-effective, only a limited number of fortification micronutrients, which are especially sensitive to losses and which are easy to measure, may be analysed. Simple, inexpensive, and rigorous analytical methods for such measurements are now available.


2020 ◽  
Vol 6 (1) ◽  
pp. 253-259
Author(s):  
L. Berketova ◽  
S. Volodina

The problem of rational and economical use of food is increasingly understood among the public, in particular among environmentalists, in different countries and people. In particular, the reasons for the loss of food raw materials and food products can be considered the presence of high competition among food producers, the problems of distribution and storage of food raw materials and food products and high requirements for the quality-appearance-of products, dishes. A significant amount of unused, discarded food negatively affects the ecology of the planet due to the formation of toxins and greenhouse gases, which in turn lead to contamination of soil, air and water resources. Direction foddering involves the distribution of extra food among the needy. Organizations and individuals donate excess food to other organizations, such as charities that help the poor or prepare meals for people without a fixed place of residence. The founder of this direction is Germany. Class food sharing in this country a strictly specified set rules and appropriate documentation. For example, food-accepting organizations are prohibited from divulging the names of the stores and hotels that provide their products. Exceptions are individual bio-companies that emphasize their charity involvement. The adoption by the German government of a program of measures to reduce food consumption is projected by 2030 should lead to a reduction in the discarded food in half. In Russia, thanks to food sharing in 2018, about 7 thousand tons of food were saved. According to RAEC and TIAR Center estimates, this volume can grow to 1 million tons by 2024. The most popular platform for food exchange is the Food sharing. ‘I’ll give you food for nothing.’ Vkontakte group. The main problem is the lack of regulation of food sharing at the legislative level, because no documents have been developed that could establish specific requirements for this type of activity and for the food sold of this kind. Also, the features of food sharing in other countries are considered: USA, France, Italy, Belgium, etc.


Author(s):  
A. A. Hayrapetyan ◽  
V. I. Manzhesov

The most rational and promising way to solve the problem of healthy nutrition, according to most scientists and specialists, is to combine raw materials of meat and vegetable origin. To obtain functional products, an important factor is not only the enrichment of food products with vegetable raw materials, but also the stabilization of the quality of meat systems. The use of vegetable components in addition to raw meat makes it possible to obtain combined products that are diverse in composition, which significantly expands the range of high-quality products and creates the possibility of designing products of a given composition. Also, it was found that the content of only meat or vegetable protein in food has less biological value than their mixture. The combination of vegetable and meat protein is well achieved in paste products. The article highlights the development of technology for the production of functional foods using meat and vegetable raw materials. The study objective was the development of combined food products for medical, prophylactic and functional purposes. An improved recipe for meat paste with the addition of vegetable ingredients is proposed. According to the developed technology, experimental development of several samples of cooked sausage “Appetitnaya” was carried out on the basis of a balanced ratio of the main food components, providing increased digestibility and digestibility. Production tests of product development were conducted. Quality assessment by organoleptic, physico-chemical and microbiological indicators of the finished product was carried out according to generally accepted methods.


2021 ◽  
pp. 726-729
Author(s):  
T.B. Guseva ◽  
S.Yu. Soldatova ◽  
O.M. Karanyan

The article describes the features of carrying out and interpreting the results of the organoleptic assessment of canned dairy products “Whole condensed milk with sugar”. The analysis of the qualitative properties of the product is presented for all the main parameters. The relationship between the organoleptic characteristics of the product and compliance with the technology for the production of canned dairy products, the characteristics of raw materials, technological modes of heat treatment, and storage conditions are considered in detail. Since the organoleptic and physicochemical characteristics of food products change over time, the authors conclude that, in addition to the input evaluation, periodic control of canned dairy products during storage should be provided.


2018 ◽  
Vol 1 (2) ◽  
pp. 154 ◽  
Author(s):  
Kristina Montrimaitė ◽  
Elena Moščenkova

Research studies have shown that the nutrition of Lithuanian population is not healthy. The objective of this study was to investigate the possibilities of usage of oilcakes from non- conventional oil plants for the development of new food products and estimation of their quality and nutritional properties. For this purpose the standard methods were used to determine and compare the nutritional value of non-traditional oilseed cakes, analyzed the possibilities of their use for development of new confectionery products. During experimental tests, the bread samples were developed and made enriched with 2.5%, 5% chia (Salvia hispanica L.) oilcake flour and also the donuts enriched with 2 to 8% citrus fibers Citri – Fi and with 8% chia oilcake flour.The physico-chemical quality, organoleptic properties of oilcakes and new products were determined by standard methods. Nutritional value of new breads was calculated using Excel program. It was found that oilcakes from non-traditional oilseeds contain up to 50 % protein and up to 35 % fiber. Chia oilcake is rich in omega-3 fatty acids. Laboratory tests showed that the bread with 2.5 % chia oilcake addition was distinguished by the best technological and organoleptic characteristics. The use of chia oilcake in the production of yeast donuts reduced the loss of fritting fat and the amount of fat in the donuts was lower by about 40% than the amount of fat in the control sample. Chia oilcakes have the same technological properties as citrus fibers Citri-Fi.


2019 ◽  
Vol 48 (4) ◽  
pp. 48-58 ◽  
Author(s):  
Ирина Мазеева ◽  
Irina Maseeva ◽  
Игорь Короткий ◽  
Igor Korotkiy ◽  
Игорь Плотников ◽  
...  

The competent choice and use of packaging materials is one of the most urgent tasks of the dairy industry, i.e. the feedstock; production technology and applied processing; organoleptic characteristics of the product; its weight; conditions, modes, and duration of transportation, storage, and sale. There is a long list of requirements for packaging materials in dairy industry. It includes high strength, resistance to wear, sufficient rigidity, an ability to weld; formation of strong and sealed seams; an aesthetic design that can attract the consumer; standard labeling, etc. The present article features the objectives and requirements of packaging; types of packaging; innovative technologies used for packaging whey protein concentrate and its products; modes and conditions of transportation and storage. Today, Russian packaging manufacturers have developed and mastered a wide range of packaging materials, closures, transport and consumer packaging of domestic raw materials; innovative packaging technologies for dairy products that take into account the sensory, structural, and mechanical characteristics of packaged products; the timing of implementation and storage. The main prospect is the development and production of packaging materials with an improved and predictable set of safety indicators and barrier level, e.g. multilayer and combined materials, such as polymer, based on innovative technological solutions.


2021 ◽  
pp. 43-46
Author(s):  
Ирина Львовна Ковалева ◽  
Ольга Александровна Соболева ◽  
Елена Михайловна Севостьянова

В настоящей статье рассматривается зависимость устанавливаемого срока годности безалкогольных напитков от вида потребительской упаковки и ее влияние на сохранность потребительских свойств. В качестве объектов исследования были выбраны безалкогольные газированные напитки на растительном сырье двух наименований. Каждый продукт был расфасован в два вида упаковки - в стеклянную бутылку и в ПЭТ. Опытные образцы подвергли ускоренному старению. Все измерения проводили на 10, 20 и 30 сут. эксперимента, что соответствует 4, 8 и 12 мес. естественного старения. Показатели безопасности образцов в течение и после окончания эксперимента соответствовали требуемым нормам. Было отмечено плавное снижение потребительских свойств напитков, упакованных в стеклянные бутылки. При этом через 30 сут эксперимента (12 мес. естественного старения) физико-химические показатели соответствовали контрольным образцам в пределах допускаемых отклонений. Некоторое ухудшение органолептических характеристик наблюдали лишь к концу заявленного производителем срока годности 12 мес. В напитках, расфасованных в ПЭТ-упаковку, наблюдали более резкое снижение потребительских свойств. При этом производитель заявляет срок их годности также 12 мес. Но уже через 20 сут эксперимента (8 мес. естественного старения) содержание СО2 не соответствовало заявленному производителем. Одновременно было отмечено значительное ухудшение органолептических характеристик. Также было выявлено появление постороннего привкуса в этих образцах, обусловленное, в том числе, приростом содержания ацетальдегида в процессе эксперимента. Проведенные исследования показали, что устанавливая срок годности безалкогольного напитка, производители должны учитывать не только тип, группу и способ обработки напитков, но и вид упаковки, который они используют. This article examines the dependence of the established shelf life of soft drinks on the type of consumer packaging and its impact on the preservation of consumer properties. As the objects of research, two names of soft carbonated drinks based on plant raw materials were selected. Each product was packaged in two types of packaging - in a glass bottle and in PET. Samples underwent accelerated aging. All measurements were carried out on days 10, 20 and 30 of the experiment, which corresponds to 4, 8 and 12 months of natural aging. The safety indicators of the samples during the experiment and after its completion corresponded to the required standards. There was a gradual decline in the consumer properties of beverages packaged in glass bottles. At the same time, after 30 days of the experiment (12 months of natural aging), the physico-chemical indicators corresponded to the control samples within the limits of permissible deviations. Some deterioration in organoleptic characteristics was observed only by the end of the stated shelf life of 12 months. Drinks packaged in PET showed a sharper decrease in consumer properties. At the same time, the manufacturer declares their shelf life is also 12 months. But after 20 days of the experiment (8 months of natural aging), the CO2 content did not correspond to the manufacturer's declared one. At the same time, a significant deterioration in organoleptic characteristics was noted. The appearance of off-flavor in these samples was also revealed. This is explained, among other things, by the increase in the content of acetaldehyde during the experiment. Studies have shown that when setting the shelf life of a soft drink, manufacturers must take into account not only the type, group and way of processing the drinks, but also the type of packaging they use.


Author(s):  
Alan Kelly

To this point, my focus has been largely on the transformations and processes that convert raw materials and ingredients into packaged final food products, while considering the relationships between such a scale and what happens in the kitchen. I believe that food science is food science whether it happens on a 10-tonne scale in a factory or in a kitchen at home or in a restaurant. It is just a matter of scale. But is this really a defensible proposition? As pointed out several times already, all food products consist of a set of raw materials and ingredients, which we submit to a process or series of processes and then place in a package in which it should remain safe and suitable for consumption for a defined period of time. What about a meal? Ingredients and raw materials, check, just taken from a larder, fridge, or freezer. Processes? Check, just maybe a different set and scale, as will be discussed. Package and storage? No, but one could say the plate, room, atmosphere, and a million other elements of presentation of a dish at home or in a restaurant are the package. Likewise, being able to maintain a shelf life may not be a priority, but it is usually regarded as a good thing when safety for the eater is guaranteed, while we often hope that those leftovers we put in the fridge or bring home in our doggy bags will retain some form of safe edibility for at least a while. Food science is science above all else, whatever scale it happens on. In the kitchen, our raw materials, animal or vegetable in particular, are products of biology, while the reactions that take place on plate or during cooking (or other processing steps) are driven by chemistry, and physics determines what happens when we heat, cool, mix, or all the other things we do. Like I said in the Introduction to this book, even the humblest kitchen is a highly scientific environment, and every meal is an experiment.


2019 ◽  
pp. 1-10
Author(s):  
M P Bakhmet ◽  
E E Ivanova ◽  
G I Kasianov ◽  
O V Kosenko ◽  
N V Magzumova ◽  
...  

Rational use of grapes processing resources is among environmental problems of AIC of Republics of the North Caucasus and Krasnodar Territory. Currently, waste from grapes processing is not practically used and worsen the ecological state of environment. The research subject is a technology based on the production of cryo-powder from pulp, squeeze, seeds and grapes skin grown in the foothill and mountainous regions. The prerequisites for research were previously performed author works on related topics. The data on vacuum SHF-drying of grape raw materials and subsequent grinding in a cryomiller are given. Modes of preparation of grape raw materials and its subsequent dehydration and cryo-grinding, which provide the possibility of successful use in the dried state in the production technology of wine beverages, are proposed. The principal feature is the use of whole grapes as a raw material, with skin and seeds. Physico-chemical parameters, the content of phenolic substances and organoleptic characteristics of wine beverages made according to the traditional technology and the beverage made from grape cryo-powders are studied. A comparative assessment is made. It is established that vacuum SHF-drying contributes to better preservation of the properties of raw materials and finished products. The organoleptic assessment has shown that wine beverages developed according to the proposed technology had a more intense color and a more pronounced taste of sweetness and acid than traditional wine beverages. The advantage of this technology is the ability to transport grape cryo-powders in unregulated temperature conditions to any point close to the consumer and carry out the production of nutritional food there.


Sign in / Sign up

Export Citation Format

Share Document