scholarly journals Meat meal and industrial fat as alternative fuels in agriculture

2007 ◽  
pp. 220-222
Author(s):  
László Nagypál

I study new energy sources which can replace fossil fuels. As I deal with the burning processes, I have analyzed several kinds of wastes. I think one solution for replacing fossil fuels would be to burn regenerated energy sources in agriculture. For example, oil, industrial fat and meat meal from processing plants are treated as hazardous wastes. There exist non-hazardous wastes for energy recovery, as by-products e.g. sawdust, wood shavings, vegetable oils, stems of plants or poultry manure.We should produce energy from the outsides of vegetables and juices, and should produce bioethanol by fermenting vegetable wastes. We could treat the used vegetable oil to make bio-diesel fuel. Meat meal and fat are good alternative energy forms, if burnt in incineration plants. These materials are new renewable sources of energy.There are some problems in the use of biomass for energy sources. We have to look for the best loading device and burning processes.

2017 ◽  
Vol 5 (1) ◽  
pp. 12-16
Author(s):  
Luboš Socha ◽  
Vladimír Socha ◽  
Peter Čekan ◽  
Daniela Čekanová ◽  
Lenka Hanáková ◽  
...  

The problem of environmental load is also reflected in air transport. Usage of fossil fuels, which are dominant nowadays, has a negative impact on the environment and also its resources are limited. Therefore, the article focuses on the prospective of use of other energy sources in aviation, such as alternative fuels (synthetic fuels, biofuels, alcohol, methane, hydrogen), solar energy and the use of fuel cells. Also, the paper briefly summarizes the approach of aircraft manufacturers to the use alternative sources.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


2021 ◽  
Vol 5 (1) ◽  
pp. 1-5
Author(s):  
Editorial team

Eurasian Journal of Physics and Functional Materials is an international journal published 4 numbers per year starting from October 2017. The aim of the journal is rapid publication of original articles and rewiews in the following areas: nuclear physics, high energy physics, radiation ecology, alternative energy (nuclear and hydrogen, photovoltaic, new energy sources, energy efficiency and energy saving, the energy sector impact on the environment), functional materials and related problems of high technologies.


Author(s):  
Jude Iyinbor ◽  
Ogunrinde Abayomi

Negative environmental effects, diminishing fossil fuel sources and soaring oil prices are some of the pertinent factors militating against the long term usage of fossil fuels. These make the introduction of alternative energy sources an integral part of our global energy plan. On the contrary, established fossil fuel infrastructures, flexibility of fossil fuels and economic gains from the oil sector are a few reasons why there is a global attitude of ‘drill the last drop before developing sustainable alternatives’. There are various energy sources that have little environmental effects and are sustainable (e.g. wind, geothermal, solar, hydro, biomass, e.t.c.), but the potentials they do have when it comes to the major energy utilization forms (heat, electricity and liquid and gaseous fuels) will be a key determinant of how alternative energy sources will be able to match the seemingly invincible presence of fossil fuels. The biomass option is examined in this report considering its potential with respect to heat, electricity and liquid and gaseous fuels market. Factors that may favour or hinder its potential and suitable solutions on how the potential can be increased are also discussed.


Author(s):  
Hanna SHEVCHUK

The article describes environmental aspects of the impact of traditional energy sources on the environment. It is substantiated that energy needs and environmental problems lead to the search for alternative renewable fuels. A comparative analysis of the structure of general supply between traditional and alternative energy sources is done. The current state of production and use of traditional fuels and prospects for the production of biofuels in Ukraine are analyzed. The projected structure of the use of traditional and alternative fuels according to the Energy Strategy of Ukraine until 2035 «Safety, energy efficiency, competitiveness» is presented. The classification of biofuels is provided depending on raw materials: first, second and third generation. Unlike biofuels from crops such as sugar cane and corn (first-generation biofuels), as well as animal and vegetable wastes (second-generation), algae-derived fuels (third-generation biofuels) have many benefits. In particular, this is a greater potential for biofuel production compared to previous systems: a variety of possible fuels (biodiesel, bioethanol, biobutanol, biogas and even jet fuel); flexible production technologies. Algae cultivation technologies have been studied: especially cultivation in open reservoirs or in more advanced closed ponds and bioreactors. It is substantiated that algae are most often used for biodiesel production; a comparison of different technologies for its production is made. The foreign experience of algae biofuel production and its usage by various automobile companies and enterprises, as well as the prospects of algae biofuel production in Ukraine are presented. Despite the prospects for the production of the third-generation biofuels, there we think, that the issue of investigation has been not been studied properly by scientists and Ukrainian producers don’t have basic knowledge.


2017 ◽  
Vol 8 (2) ◽  
pp. 47
Author(s):  
Kris Hariyanto ◽  
Benedictus Mardwianta

Biogas is an alternative energy sources as a substitute for fossil fuels in household activities daily, but there are obstacles in the use of biogas, namely the difficulty of arranging a flame that is stable and fuel consumption relatively less efficient biogas. So it takes a design development system that will produce a burning stove produces biogas-fueled stove fits the purpose of research, on the other hand biogas stove should be simple, cheap production price, maximum efficiency and safe to use. Stages in the study include: desk assessment, creation of objective requirements design, manufacture conceptual and basic design, manufacture real stove. As for knowing the performance of the stove carried stove performance tests are: test flame stability and efficiency. The results showed that the efficiency of the biogas stove design results in only 31 percent higher than the efficiency of biogas stoves old design, while the fuel consumption of biogas stoves new design is 16 percent lower when compared with fuel consumption of biogas stoves old design. In terms of manufacture and ease of repair and maintenance of gas cookers new design is more easily repaired and easy to make and simple in form compared with the old design biogas stoves.


2021 ◽  
pp. 25-31
Author(s):  
Andrii Doronin ◽  
Olena Polishchuk ◽  
Vitalii Rybchak

Bearing in mind a serious dependence of Ukraine on the import of oil products, it is of great significance for Ukraine to develop own manufacture and to increase the share of oil product substitution with biofuel. It is not possible to develop biofuel market without solving a number of economic and organizational problems, which is why it is expedient to introduce financial-economic stimuli for biofuel producers and to build a stable demand for alternative kinds of fuel. In Ukraine the manufacture of alternative fuels almost terminated, however the solution of the problem of biofuel manufacture will depend on the coordination of joint actions of the state, participants of market relations and the development of the system of measures aimed at the creation of pre-conditions to enhance a competitive biofuel market in Ukraine, taking into consideration foreign experience and current tendencies of the manufacture and use of the alternative energy sources.


2013 ◽  
pp. 261-278
Author(s):  
Abdeen Mustafa Omer

In the recent attempts to stimulate alternative energy sources for heating and cooling of buildings, emphasis has been put on utilisation of the ambient energy from ground source and other renewable energy sources. Exploitation of renewable energy sources and particularly ground heat in buildings can significantly contribute towards reducing dependency on fossil fuels. This paper highlights the potential energy saving that could be achieved through use of ground energy source. It also focuses on the optimisation and improvement of the operation conditions of the heat cycles and performances of the DX GSHP. It is concluded that the direct expansion of GSHP are extendable to more comprehensive applications combined with the ground heat exchanger in foundation piles and the seasonal thermal energy storage from solar thermal collectors. This article discusses the principle of the ground source energy, varieties of GSHPs, and various developments.


2016 ◽  
Vol 4 (2) ◽  
pp. 59 ◽  
Author(s):  
Dr. Babita Srivastava

Purpose:To emphasize the importance of renewable and alternative energy, as nations become increasingly reliant on increasingly less available conventional energy sources. Simultaneously, the long-term and detrimental effects of such reliance is explored and quanitified so as to better justify investments into renewable, widely available, and less polluting energy sources.Design/Metholody/Approach:Data is collected from a variety of publicly available sources and their relevance is explored through contrast and comparison. The graphs and data used primarily focus on energy and energy consumption such as fuel pricing and exporting as well as the rate of fuel exporting by various nations.Findings:Based on the data analyzed, through the continuous use of fossil fuels, a country faces multiple challenges: depletion of fossil fuel reserves, global warming, environmental concerns, geopolitical and military conflicts and, of late, a continued and significant fuel price rise. The authors conclude these problems create an unsustainable situation and that without converting their energy sector to at least be in part less reliant on hydrocarbons and similar fuels and more reliant on more widely available and less polluting energy sources such as sunlight or geothermal energy a nation will inevitably face a catastrophic collapse of their energy sector.Research Limitations/Implications:Without cooperation of the governments of leading energy consuming nations in redeveloping their energy sector based on this or similar research, little of what has been explored can be widely applied. Consequently, the conclusions of this paper represent a single step in the process of redefining worldwide energy consumption rather than giving an explicit answer. Further research will be needed in order to most fully present an effective argument to the public sector, the private sector, and the common citizen that energy habits must be changed.Originality/value:The conclusions reached are an essential part to understanding the wide reaching effects of the world’s current energy habits. With the ever increasing threat of global warming, emptying fuel reserves, and unnecessary polluting and waste habits of most nation’s energy sectors, this research, along with the cited data, can aid in the redirection of such energy habits before a point of no return. 


Author(s):  
Chris Pinney ◽  
Melissa Shurland ◽  
Brian Smith

A research initiative by the Federal Railroad Administration (FRA) and Transportation Technology Center, Inc. (TTCI) was developed to better understand the potential cost and benefits of using alternative fuels for United States freight and passenger locomotive operations. The framework for a decision model was developed to evaluate the feasibility of these newly emerging technologies. Because these alternatives (fuels and engine designs) are at early stages of development, the objective is to identify the most feasible alternatives and support their future development. Energy security policies developed by the US Department of Energy (DOE) and emission standards set forth by US Environmental Protection Agency (EPA) are driving most of the technology initiatives related to alternative fuels in the US. Identifying alternatives that may provide benefits in the areas of emissions and energy security in relation to their potential cost, safety, and operating efficiencies are the main analysis objectives of this study. Some of the alternative energy sources being studied, and that may be in limited use are biomass, natural gas and coal. These energy sources have the potential to replace diesel fuel and provide power for locomotive operations. However, most are considered experimental by the railway industry. In most cases engine modifications or complete motive power design changes are required. As a result, the use of alternative fuels or locomotives that are different from current diesel engine designs represent only a small percent of the total railroad fleet. The main drivers for the decision model identified in this research effort are Cost, Energy, Security, Emissions, Safety and Efficiency. Under each decision driver there are multiple criteria that may be used for comparison between proposed alternatives. The goal of the decision model is to understand if the criteria under the decision drivers are independently a cost or benefit to industry stakeholders as compared to a baseline case.


Sign in / Sign up

Export Citation Format

Share Document