scholarly journals Prediction of Compaction Parameters from Soil Index Properties Case Study: Dam Complex of Upper Atbara Project

2021 ◽  
pp. 01-09
Keyword(s):  
Regression Analysis ◽  
Soil Compaction ◽  
Civil Engineering ◽  
Physical And Mechanical Properties ◽  
Liquid Limit ◽  
Atterberg Limits ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Field Compaction ◽  
Microsoft Office

Soil compaction involves concretion and a relative variation of physical and mechanical properties of soils. Determining laboratory compaction characteristics such as maximum dry density (MDD) and optimum moisture content (OMC) could be vital work to manage field compaction for all earth-works structures. There are 3 necessary Atterberg limits: plastic limit (PL), liquid limit (LL), and Plastic Index (PI). The most objective of this paper is to get the relationships between compaction parameters and their Atterberg limits of fine-grained soils and to create reliable correlations. For conducting this work, forty samples are collected from a borrowed space that is found at the bank upstream of Setit watercourse. The tests of soil samples were executed at the laboratory of Dam complex of the upper Atbara project. To perform this work, the Microsoft Office Excel software was exercised for the regression analysis of compaction parameters and Atterberg limits. Several trials were created to get the relationships between Atterberg limits (LL, PL, and PI) with the compaction parameters (OMC, and MDD). From the regression analysis, it's found that OMC and MDD have an excellent relationship with the LL other than the PL and PI. It had been observed that the (OMC) has an excellent correlation with (MDD) other than the remaining parameters. From this work, it's going to be suggested to use the soil compaction properties and Liquid Limits' correlations attributable to their reliable results compared with the other correlations. The result of the paper may be helpful and applicable in numerous civil engineering sectors, particularly for preliminary investigations and prefeasibility studies of various civil engineering works.

scholarly journals Influence of Submergence on Stabilization of Loess in Shaanxi Province by Adding Fly Ash

2018 ◽  
Vol 9 (1) ◽  
pp. 68 ◽  
Author(s):  
Samnang Phoak ◽  
Ya-Sheng Luo ◽  
Sheng-Nan Li ◽  
Qian Yin
Keyword(s):  
Fly Ash ◽  
Construction Materials ◽  
Liquid Limit ◽  
Atterberg Limits ◽  
Shaanxi Province ◽  
Sustainable Construction ◽  
Dry Density ◽  
Curing Time ◽  
Maximum Dry Density ◽  
Swell Potential

In this study, the influence of fly ash (FA) content (0%, 10%, 20%, and 30%) on the alteration in the physical and mechanical parameters of loess is investigated. The influences of curing time (0, 14, and 28 days) and submergence and non-submergence conditions are analyzed as well. Analysis considers the variation in Atterberg limits (liquid limit, plastic limit, and plasticity index), compaction parameters (optimum moisture content (OMC), and maximum dry density (MDD)), unconfined compressive strength (UCS) stress, UCS strain, California bearing ratio (CBR) value, and swell potential. Results show that the application of FA-stabilized loess (FASL) is effective. Specifically, the MDD decreases and the OMC increases, the UCS stress increases and the UCS strain decreases, the CBR value improves and the swell potential declines, but Atterberg limits are insignificantly changed by the increase in the FA ratio compared with those of untreated loess. The UCS stress and CBR value are improved with the increase in curing time, whereas the UCS strain is negligible. FASL under submergence condition plays an important role in improving the effect of FA on the UCS stress and CBR value compared with that under non-submergence condition. The UCS stress and CBR value are more increased and more decreased than the UCS strain in submerged samples. Therefore, the application of FASL in flood areas is important for obtaining sustainable construction materials and ensuring environmental protection.

scholarly journals Study of water salinity effect on geotechnical behavior of soil structure using response surface method (RSM), (Case study: Gotvand Dam)

2015 ◽  
Vol 37 ◽  
pp. 350
Author(s):  
Mohammad Ajam ◽  
Mohammad Reza Sabour ◽  
Gorban Ali Dezvareh
Keyword(s):  
Response Surface ◽  
Mechanical Characteristics ◽  
Liquid Limit ◽  
Atterberg Limits ◽  
Water Salinity ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Salinity Effect ◽  
Khuzestan Province ◽  
Weight Percentage

Specifying the mechanical characteristics of soil is as one of the major steps in designing the foundation for civil projects, particularly hydraulic structures. This study examines the water salinity effect on engineering characteristics of fine-grained soil in clayey core of Gotvand dam which it is located on the Karun River in Khuzestan province, Iran. For this purpose, three types of salt; sodium chloride, magnesium chloride and calcium sulfate is considered that the last one has the highest concentration in the water of reservoir behind the dam, and then their effect on the mechanical characteristics of clay including density, Atterberg limits, angel of internal friction, adhesion and open inflation have examined. Therefore, treatments required for testing were provided by combining the mentioned salts considering the weight percentage of salt in the water behind the dam and designing a test using response surface methodology (RSM). The results were statistically analyzed by RSM. Results showed that type and amount of soil salinity has no significant impact on the compaction characteristics of soil namely optimum moisture content and the maximum dry density. Results of changes in Atterberg limits showed that presence of salt ions reduces the plasticity of the soil and it was seen a certain decrease in the liquid limit and subsequently a dramatic drop in soil plasticity by increasing the percentage of soil; while the plastic limit remained almost unchanged. Eventually, results of open inflation showed that whatever the salt concentration be higher, the rate of sample's open inflation will be lower.

scholarly journals Stabilization of soft clayey soils with sawdust ashes

2018 ◽  
Vol 162 ◽  
pp. 01006
Author(s):  
Hussein Karim ◽  
Makki Al-Recaby ◽  
Maha Nsaif
Keyword(s):  
Clayey Soil ◽  
Soft Clay ◽  
Physical And Mechanical Properties ◽  
Road Construction ◽  
Dry Weight ◽  
Liquid Limit ◽  
Clay Soils ◽  
Dry Density ◽  
Clayey Soils ◽  
Maximum Dry Density

The problems of soft clayey soils are taken in considerations by many Iraqi geologists and civil engineers, because about 35% of the Iraqi clay soils (especially southern Iraq) are weak. Thus, it is necessary to improve the properties of such soils for road construction by means of using of various stabilizers such as sawdust ash. The main goal of the present study is to stabilize soft clay models with sawdust ash (SDA) additive using different percentages (0, 2, 4, 6, 8 and 10% by dry weight of soil). The results revealed that the additive has adverse effects on the property of soil indices by increasing its liquid limit and plasticity index due to clay content. The mixture of sawdust ashes with soft clay soils improves most other physical and mechanical properties of the soil, as expressed by a general reduction in specific gravity and maximum dry density (MDD), as well as a reduction in the compression coefficients (Cc and Cr) with an increase in SDA content. While increasing the optimum moisture content (OMC) and the undrained shear strength (cu) with the increase in SDA content. The stabilized soils (with 4 and 10% ash content) resulted in low CBR values (1.6-1.2%) which can be used as sub-base. The SDA can be considered as a cheap and acceptable stabilizing agent in road construction for improving most of the geotechnical properties of the soft clayey soil.

scholarly journals Study of water salinity effect on geotechnical behavior of soil structure using response surface method (RSM), (Case study: Gotvand Dam)

2015 ◽  
Vol 37 ◽  
pp. 360
Author(s):  
Mohammad Ajam ◽  
Mohammad Reza Sabour ◽  
Gorban Ali Dezvareh
Keyword(s):  
Response Surface ◽  
Mechanical Characteristics ◽  
Liquid Limit ◽  
Atterberg Limits ◽  
Water Salinity ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Salinity Effect ◽  
Khuzestan Province ◽  
Weight Percentage

Specifying the mechanical characteristics of soil is as one of the major steps in designing the foundation for civil projects, particularly hydraulic structures. This study examines the water salinity effect on engineering characteristics of fine-grained soil in clayey core of Gotvand dam which it is located on the Karun River in Khuzestan province, Iran. For this purpose, three types of salt; sodium chloride, magnesium chloride and calcium sulfate is considered that the last one has the highest concentration in the water of reservoir behind the dam, and then their effect on the mechanical characteristics of clay including density, Atterberg limits, angel of internal friction, adhesion and open inflation have examined. Therefore, treatments required for testing were provided by combining the mentioned salts considering the weight percentage of salt in the water behind the dam and designing a test using response surface methodology (RSM). The results were statistically analyzed by RSM. Results showed that type and amount of soil salinity has no significant impact on the compaction characteristics of soil namely optimum moisture content and the maximum dry density. Results of changes in Atterberg limits showed that presence of salt ions reduces the plasticity of the soil and it was seen a certain decrease in the liquid limit and subsequently a dramatic drop in soil plasticity by increasing the percentage of soil; while the plastic limit remained almost unchanged. Eventually, results of open inflation showed that whatever the salt concentration be higher, the rate of sample's open inflation will be lower.

scholarly journals A study on the correlation potential of compaction characteristics and atterberg limits of selected lateritic soils

2020 ◽  
Vol 8 (1) ◽  
pp. 22
Author(s):  
G.O Adunoye ◽  
A.A Ojo ◽  
A.F Alasia ◽  
M.O Olarewaju
Keyword(s):  
Moisture Content ◽  
Liquid Limit ◽  
Optimum Moisture Content ◽  
Soil Samples ◽  
Atterberg Limits ◽  
Dry Density ◽  
Plastic Limit ◽  
Maximum Dry Density ◽  
Compaction Characteristics ◽  
Correlation Potential

The importance of soil compaction for civil engineering construction and application cannot be over-emphasised. To perform soil compaction, numerous number of samples are required, with considerable time and laborious laboratory activities. This has necessitated the need to find models for the prediction of compaction characteristics, using easily determined soil properties. This work therefore undertook a study of the correlation potential of compaction characteristics and Atterberg limits of soils, with a view to modelling compaction characteristics, using Atterberg limits. To achieve this aim, soil samples were obtained from selected locations within Obafemi Awolowo University campus, Ile-Ife, Nigeria. Preliminary, Atterberg limits and compaction tests were conducted on the soil samples, using standard procedure. Using Microsoft Excel and Xuru’s Regression tool, the laboratory test results were used to develop relationships between compaction characteristics (optimum moisture content and maximum dry density) and Atterberg limits (liquid limit and plastic limit). Results showed that the natural moisture content of soil samples ranged between 4.97 % and 19.72 %; liquid limit ranged between 27 % and 68 %; plastic limit ranged between 18.92 % and 63.01 %; and plasticity index ranged between 0.94 % and 14.63 %. The optimum moisture content ranged between 6.7 % and 27 %, while the maximum dry density ranged between 1560 kN/m3 and 2260 kN/m3. The results of regression analysis showed that the combination of liquid limit and plastic limit has a strong correlation with optimum moisture content (R2 = 0.870); while the combination (of liquid limit and plastic limit) showed a weak correlation with maximum dry density (R2 = 0.150). The study concluded that liquid limit and plastic limit could be used to estimate the optimum moisture content of the soils, by applying the developed relationship/equation.  

scholarly journals An investigation into the cause of road failure along Sagamu-Papalanto highway southwestern Nigeria

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Ubido Oyem Emmanuel ◽  
Igwe Ogbonnaya ◽  
Ukah Bernadette Uche
Keyword(s):  
Construction Materials ◽  
Road Construction ◽  
Linear Shrinkage ◽  
Liquid Limit ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Southwestern Nigeria ◽  
Low Resistivity ◽  
The Road ◽  
Cause Of Failure

AbstractInvestigation into the cause of road failure has been carried out along a 60 km long Sagamu –Papalanto highway southwestern Nigeria. Geochemical, mineralogical, geotechnical and geophysical analyses were conducted to evaluate the cause of failure along the study area. The results of the laboratory tests showed that the percentage amount of fines ranges from 12 to 61.3%, natural moisture content from 6.8 to 19.7%, liquid limit in the range of 25.1–52.2%, linear shrinkage between 3.96 to 12.71%, plastic limit ranges from 18.2–35%, plasticity index ranges from 5.2 to 24.6%, free swell in the range from 5.17–43.9%, maximum dry density ranges from 1.51–1.74 g /cm3, specific gravity ranges from 2.52–2.64 and CBR between 3 and 12%. The Cone Penetrometer Test (CPT) shows a resistance value of 20–138 kgf/cm2. The major clay mineral that is predominant in the studied soil is kaolinite. The major oxides present are SiO2, Al2O3, Fe2O3, K2O, Na2O, MgO and CaO. The result of the 2D Electrical Resistivity Imaging revealed a low resistivity values for profile 2 and 3 ranging from 100 Ωm – 300 Ωm, between a distance of 20 m – 240 m along the profile to a depth of 7.60 m and a low resistivity value ranging from 50 Ωm – 111Ωm, between a distance of 80 m − 120 m along the profile to a depth of 15 m. It was concluded that the low CBR, low MDD and the class of subsoils namely A-26, A-7, A-2-7 (clayey soils) which were identified are responsible for the cause of failure experienced in the study area. These makes the soils unsuitable as road construction materials and hence, there is need for stabilization during the reconstruction and rehabilitation of the road.

scholarly journals Geotechnical properties of reinforced clayey soil using nylons carry’s bags by products

2018 ◽  
Vol 162 ◽  
pp. 01020 ◽  
Author(s):  
Nahla Salim ◽  
Kawther Al-Soudany ◽  
Nora Jajjawi
Keyword(s):  
Soil Stabilization ◽  
Clayey Soil ◽  
Ground Improvement ◽  
Soft Soil ◽  
Liquid Limit ◽  
Waste Material ◽  
Industrial Wastes ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Replacement Technique

All structures built on soft soil may experience uncontrollable settlement and critical bearing capacity. This may not meet the design requirements for the geotechnical engineer. Soil stabilization is the change of these undesirable properties in order to meet the requirements. Traditional methods of stabilizing or through in-situ ground improvement such as compaction or replacement technique is usually costly. Now a safe and economic disposal of industrial wastes and development of economically feasible ground improvement techniques are the important challenges being faced by the engineering community. This work focuses on improving the soft soil brought from Baghdad by utilizing the local waste material for stabilization of soil, such as by using “Nylon carry bag’s by product” with the different percentage and corresponding to 1 %, 3% and 5% (the portion of stabilizer matters to soil net weight) of dried soil. The results indicated that as Nylon’s fiber content increases, the liquid limit decreases while the plastic limit increases, so the plasticity index decreases. Furthermore, the maximum dry density decreases while, the optimum moisture content increases as the Nylon’s fiber percentage increases. The compression index (decreases as the Nylon’s fiber increases and provides a maximum of 43% reduction by adding 5% nylon waste material. In addition, the results indicated that, the undrained shear strength increases as the nylon fiber increases.

scholarly journals Technical and Environmental Impacts of Coal Waste Used as a Soil Stabilizer in Construction Projects of Forest Roads

2021 ◽  
Vol 42 (3) ◽  
Author(s):  
Sara Mansouri ◽  
Mehran Nasiri ◽  
Amir Modarres
Keyword(s):  
Environmental Analysis ◽  
Soil Stabilization ◽  
Liquid Limit ◽  
Soil Conditions ◽  
Coal Waste ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Forest Roads ◽  
Waste Products ◽  
Soil Stabilizer

Many pozzolans are waste products from industrial processes. Every year a huge amount of coal waste is gathered from the coal washing plant in the Hyrcanian forests of Iran. These materials can be used for soil stabilization in construction and maintenance projects of forest roads. This paper aims to (a) investigate the role of coal waste (CW) as a soil stabilizer and (b) determine the changes in soil specification regarding the environmental pollution in different combinations of materials (soil, lime (4 and 6%) and CW (3, 6, 9 and 12%)). For this purpose, different technical and environmental analysis and laboratory tests were performed. Technical tests showed that the soil liquid limit and maximum dry density decreased with an increase in lime and CW contents. Addition of CW could increase the soil CBR, UCS and OMC. According to XRD test, the addition of CW and lime can increase the size of crystals in stabilized soil samples. Environmental analysis showed that the use of stabilizer significantly reduced the concentration of heavy metals such as Cd, Cr and Pb. Also, all of the metal concentrations leached from samples satisfied the required criteria, but the addition of lime and CW increased the concentration of N, P, and K. These changes can increase the invasive species consistent with calcareous soil conditions along the roads. According to the results, the combination of coal waste and lime can be one of the best methods for in situ remediation. It would, however, be better to use a minimum amount of stabilizer in pavement layers of access roads due to environmental sensitivity.

scholarly journals Geotechnical and Mineralogical Appraisal of Shale and Claystone Facies of the Maastrichtian Patti Formation, Bida Basin, Nigeria

2020 ◽  
Vol 5 (2) ◽  
Author(s):  
Olusola J Ojo ◽  
Oladele A Omotoso ◽  
Adams Agbelekale ◽  
Suraju A Adepoju ◽  
Ayodeji Awe ◽  
...  
Keyword(s):  
Particle Size ◽  
Civil Engineering ◽  
Construction Material ◽  
Liquid Limit ◽  
Geotechnical Properties ◽  
Atterberg Limits ◽  
Minor Amount ◽  
Low Permeability ◽  
High Plasticity ◽  
Swell Potential

The need for construction materials in the rapidly developing areas around Federal Capital Territory, Abuja, Nigeria cannot be overemphasized and this study was undertaken in line with this need. The study area, located about 60km from Abuja, is underlain predominantly by shales and claystones of the Patti Formation. These argillaceous rocks may offer locally sourced construction material if they meet certain specifications, however to date, there has not been a geotechnical study of these rocks. The geotechnical properties and the mineralogy of the shale and claystone were investigated to evaluate their suitability for civil engineering works. Particle size distribution, Atterberg  limits and X-ray diffraction analyses were performed on fifteen shale and claystone samples collected  from  three localities (along an approximately 25km transect) for determination of their geotechnical properties and mineralogical composition. Mineralogical data obtained show the samples are dominated by kaolinite with minor amount of montmorillonite. Quartz and minor amounts of microcline, rutile and anatase dominate the non-clay mineral fraction. Particle size data indicate high proportion of fines and they are well graded. The Atterberg limits indicate that the samples have average values of liquid limit of 51%, plastic limit of 23%, plasticity index of 29% and shrinkage limit of 13%. These indicate they are of medium compressibility, low to medium shrink/swell potential, marginal expansive rating and low permeability. High bulk specific gravity (average of 2.61) suggests the samples are inorganic and this is supported by the consistency limits values. Generally, the results indicate the shale and claystone can be useful as stabilizing materials in civil engineering works. In addition, the marginally expansive nature of the shale and claystone, low permeability and intermediate to high plasticity may make them suitable as road subgrade.Keywords— activity, Bida Basin, Gerinya, Kaolinite, plasticity, Patti Formation

Evaluation of Suitability of Red Clay from Selected Areas of Gercus Formation, Sulaimaniyah, North Iraq, for the Construction of Embankment Dams

2021 ◽  
pp. 3417-3427
Author(s):  
Amera I. Hussain Hussain ◽  
Ibraheem I. Ibraheem
Keyword(s):  
Ph Value ◽  
Soil Classification ◽  
Liquid Limit ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Red Clay ◽  
Embankment Dams ◽  
Filling Materials ◽  
The North ◽  
Geotechnical Assessment

      In this research, a geotechnical assessment was conducted for clay of the Gercus Formation to determine its suitability for embankment dams. The selected area is located in the north of Iraq. Six samples were collected from two sites in Dokan (Sulaimaniyah) and Haibat Sultan mountain (Koysinjaq), three samples each. Various geotechnical (physical, mechanical and chemical) tests were conducted based on standard specifications.      The results of the grain size test of clay samples showed their conformity with Zone C curves and their suitability for the construction of embankment dams, according to the Iraqi standard for roads and bridges.  The results of the plasticity limits test showed that the soil is made of fine, low plasticity silt (ML), and low plasticity clay (CL), according to the unified standard soil classification. The water content and plasticity limit tests (liquid limit, plastic limit, and plasticity index) demonstrated that these clays are conformable with the limits of the Iraqi standards. The results of the modified compaction test found a maximum dry density value of 1.962 g/cm3 with an optimum moisture content of 11.5%. The results of the permeability index (K) revealed low permeability according to the Das classification and, therefore, showed the suitability of the samples as raw filling materials in the construction of dams. Chemical tests (sulfate content, organic materials content, total dissolved salts, gypsum content, and pH value) showed compatibility with the requirements for the use in dams construction under the Iraqi standard (SoRB/ R5).

Sign in / Sign up

Export Citation Format

Share Document