scholarly journals Analisis Evapotranspirasi Menggunakan Metode Penman-Monteith pada Vertical Garden

CANTILEVER ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 19-26
Author(s):  
Arifin Daud ◽  
Citra Indriyati ◽  
Sarah Yuli Hasanah
Keyword(s):  
Wind Speed ◽  
Environmental Conditions ◽  
Reference Evapotranspiration ◽  
Environmentally Friendly ◽  
Environmental Damage ◽  
Evaporation Process ◽  
Chlorophytum Comosum ◽  
Garden Plants

The development of environmentally friendly infrastructure is very important to reduce the environmental damage that has occurred. Environmentally friendly infrastructure can be supported by vertical garden. Plants in vertical garden undergo evaporation process called evapotranspiration process. The evapotranspiration process can be used to find out the needs of water in plants. The method used to obtain the evapotranspiration value is the Penman-Monteith method. The plants used are Plectranthus scutellarioides, Begonia, Coleus, Euodia ridleyi dwarf, Euodia ridleyi, and Chlorophytum comosum. The reference evapotranspiration value in The Hydraulic Laboratory of Sriwijaya University is 4.9826 mm/day and the smallest is 2.1262 mm/day. The reference evapotranspiration value is influenced by temperature, wind speed, and humidity conditions. Based on these three influences, temperature has a greater influence on the reference evapotranspiration. The largest evapotranspiration value of the six types of plants used is the Plectranthus scutellarioides, which is 3.3347 mm/day, the evapotranspiration value of the smallest plant is Euodia ridleyi dwarf, which is 2.6616 mm/day. The location and arrangement of plants and environmental conditions such as temperature, humidity, wind speed affect the amount of evapotranspiration value.

ASSESSING ENVIRONMENTAL IMPACTS DURING NATURAL DISASTER: THE DEVELOPMENT OF A RAPID ENVIRONMENTAL ASSESSMENT METHODOLOGY

2002 ◽  
Vol 04 (04) ◽  
pp. 475-492 ◽  
Author(s):  
CHARLES KELLY
Keyword(s):  
Environmental Impact ◽  
Impact Assessment ◽  
Environmental Impact Assessment ◽  
Environmental Conditions ◽  
Environmental Damage ◽  
Assessment Procedure ◽  
Disaster Victims ◽  
Wide Range ◽  
Negative Impacts ◽  
The Impact

The linkages between disaster and environmental damage are recognized as important to predicting, preventing and mitigating the impact of disasters. Environmental Impact Assessment (EIA) procedures are well developed for non-ndisaster situations. However, they are conceptually and operationally inappropriate for use in disaster conditions, particularly in the first 120 days after the disaster has begun. The paper provides a conceptual overview of the requirements for an environmental impact assessment procedure appropriate for disaster conditions. These requirements are captured in guidelines for a Rapid Environmental Impact Assessment (REA) for use in disasters. The REA guides the collection and assessment of a wide range of factors which can indicate: (1) the negative impacts of a disaster on the environment, (2) the impacts of environmental conditions on the magnitude of a disaster and, (3) the positive or negative impacts of relief efforts on environmental conditions. The REA also provides a foundation for recovery program EIAs, thus improving the overall post disaster recovery process. The REA is designed primarily for relief cadres, but is also expected to be usable as an assessment tool with disaster victims. The paper discusses the field testing of the REA under actual disaster conditions.

Empirical Equations to Estimate Evapotranspiration in Mosul City

2020 ◽  
Vol 27 (4) ◽  
pp. 98-102
Author(s):  
Haqqi Yasin ◽  
Luma Abdullah
Keyword(s):  
Wind Speed ◽  
Relative Humidity ◽  
Air Temperature ◽  
Reference Evapotranspiration ◽  
Sunshine Duration ◽  
Food And Agriculture ◽  
Food And Agriculture Organization ◽  
Daily Data ◽  
Daily Sunshine ◽  
Measured Wind Speed

Average daily data of solar radiation, relative humidity, wind speed and air temperature from 1980 to 2008 are used to estimate the daily reference evapotranspiration in the Mosul City, North of Iraq. ETo calculator software with the Penman Monteith method standardized by the Food and Agriculture Organization is used for calculations. Further, a nonlinear regression approach using SPSS Statistics is utilized to drive the daily reference evapotranspiration relationships in which ETo is function to one or more of the average daily air temperature, actual daily sunshine duration, measured wind speed at 2m height and relative humidity

scholarly journals Performance of different methods for reference evapotranspiration estimation in Jaíba, Brazil

2018 ◽  
Vol 22 (2) ◽  
pp. 83-89 ◽  
Author(s):  
Gustavo H. da Silva ◽  
Santos H. B. Dias ◽  
Lucas B. Ferreira ◽  
Jannaylton É. O. Santos ◽  
Fernando F. da Cunha
Keyword(s):  
Wind Speed ◽  
Solar Radiation ◽  
Standard Method ◽  
Reference Evapotranspiration ◽  
Meteorological Data ◽  
Air Humidity ◽  
Method Performance ◽  
Relative Air Humidity ◽  
Evapotranspiration Estimation ◽  
Missing Variables

ABSTRACT FAO Penman-Monteith (FO-PM) is considered the standard method for the estimation of reference evapotranspiration (ET0) but requires various meteorological data, which are often not available. The objective of this work was to evaluate the performance of the FAO-PM method with limited meteorological data and other methods as alternatives to estimate ET0 in Jaíba-MG. The study used daily meteorological data from 2007 to 2016 of the National Institute of Meteorology’s station. Daily ET0 values were randomized, and 70% of these were used to determine the calibration parameters of the ET0 for the equations of each method under study. The remaining data were used to test the calibration against the standard method. Performance evaluation was based on Willmott’s index of agreement, confidence coefficient and root-mean-square error. When one meteorological variable was missing, either solar radiation, relative air humidity or wind speed, or in the simultaneous absence of wind speed and relative air humidity, the FAO-PM method showed the best performances and, therefore, was recommended for Jaíba. The FAO-PM method with two missing variables, one of them being solar radiation, showed intermediate performance. Methods that used only air temperature data are not recommended for the region.

scholarly journals An analysis of temperature distribution in solar photovoltaic module under various environmental conditions

2018 ◽  
Vol 240 ◽  
pp. 04004 ◽  
Author(s):  
Marek Jaszczur ◽  
Qusay Hassan ◽  
Janusz Teneta ◽  
Ewelina Majewska ◽  
Marcin Zych
Keyword(s):  
Heat Transfer ◽  
Temperature Distribution ◽  
Wind Speed ◽  
Solar Radiation ◽  
Environmental Conditions ◽  
Operating Temperature ◽  
Photovoltaic Module ◽  
Solar Photovoltaic ◽  
System Efficiency ◽  
Pv System

The operating temperature of the photovoltaic module is an important issue because it is directly linked with system efficiency. The objective of this work is to evaluate temperature distribution in the photovoltaic module under different environmental conditions. The results shown that photovoltaic module operating temperature depends not only on the ambient temperature or solar radiation dependent but also depends on wind speed and wind direction. It is presented that the mounting conditions which are not taken into consideration by most of the literature models also play a significant role in heat transfer. Depends on mounting type an increase in module operating temperature in the range 10-15oC was observed which cause further PV system efficiency decrease of about 3.8-6.5 %.

scholarly journals TECHNOLOGY OF CREATING AND USAGE OF PROECOLOGICAL BLOCK EMPTYSEED

space&FORM ◽  
2021 ◽  
Vol 2021 (47) ◽  
pp. 31-44
Author(s):  
Jan Cudzik ◽  
◽  
Konstancja Olszewska ◽  
Keyword(s):  
Environmental Conditions ◽  
Building Materials ◽  
Environmentally Friendly ◽  
Environmental Safety ◽  
Research Process ◽  
Natural Building

Nowadays, finding natural substitutes for mass-produced materials is one of the main tasks faced by scientists and designers. There is an increasing emphasis on the theme of ecology and the need for sustainability. Variants and methods are sought which will create environmentally friendly materials in a fast, relatively inexpensive and ecological way. The aim of this paper is to present different proposals of natural building materials and to demonstrate the research process in the search for an environmentally friendly facade material, analyzing it in terms of strength, durability and aesthetics. One of the reasons for this is the steadily deteriorating environmental conditions. Thus, architects strive to improve environmental safety.

scholarly journals Communication Network Structure in Building Environmentally Friendly Behavior (The Case of a Dense Community in Bogor City)

2019 ◽  
Vol 7 (2) ◽  
pp. 119-125
Author(s):  
Megafirmawanti Lasinta ◽  
Nurmala Katrina Pandjaitan ◽  
Sarwititi Sarwoprasodjo
Keyword(s):  
Communication Network ◽  
Communication Networks ◽  
Urban Areas ◽  
Environmentally Friendly ◽  
Communication Process ◽  
Primary Data ◽  
Environmental Damage ◽  
Community Members ◽  
Personal Network ◽  
The Government

Efforts to solve environmental pollution in densely populated communities in urban areas are not only the responsibility of the government. Communities as part of social system also have an important role to control the environmental impacts of pollution. One way that community members must do in reducing environmental damage is familiarize environmentally friendly behavior. This research focuses on the analysis of environmentally friendly behavior of Pulo Geulis community members in Bogor City. Pulo Geulis is a Delta in the middle of the Ciliwung River which more or less contributes to whether or not the Ciliwung River is polluted in Bogor City. The communication process is an important factor in changing individual behavior. This study aimed to analyze the structure of community communication networks in developing environmentally friendly behavior. Primary data was obtained through a survey of 100 respondents and in-depth interviews with several informants. Data were analyzed using sociometric methods. The results of sociometric analysis showed that the structure of the community communication network in building community-friendly behavior is a radial personal network. This structure illustrated that community information centers are located in certain individuals such as head of RW, head of RT, or Posyandu cadres. The radial personal network in this study also described the formation of clique, star, bridge, and isolates in the community communication network at Pulo Geulis.

scholarly journals Multiscale coherence analysis of reference evapotranspiration of north-western Iran using wavelet transform

2021 ◽  
Author(s):  
V. Sreedevi ◽  
S. Adarsh ◽  
Vahid Nourani
Keyword(s):  
Wind Speed ◽  
Reference Evapotranspiration ◽  
Local Scale ◽  
Wavelet Coherence ◽  
Coherence Analysis ◽  
Drastic Reduction ◽  
North West ◽  
Mean Temperature ◽  
North Western ◽  
Multiple Wavelet Coherence

Abstract This study applies different wavelet coherence formulations for investigating the multiscale associations of reference Evapotranspiration (ET0) of Tabriz and Urmia stations in North West Iran with five climatic variables, mean temperature (T), pressure (P), relative humidity (RH), wind speed (U) and Solar Radiation (SR). The relationships between different variables are quantified using the Average Wavelet Coherence (AWC) and the Percentage of Significant Coherence (PoSC). The Bivariate Wavelet Coherence (BWC) analysis showed that mean temperature (AWC = 0.73, PoSC = 59.18%) and wind speed (AWC = 0.63, PoSC = 49.55%) are the dominant predictors at Tabriz and Urmia stations. On considering the Multiple Wavelet Coherence (MWC) analysis, it is noticed that among the two-factor combinations, the T-P and P-RH combinations resulted in the highest coherence values for Tabriz and Urmia stations. T-U-SR combination produced the highest multiple wavelet coherence values among the three-factor cases for both the stations. The Partial Wavelet Coherence (PWC) analysis indicated a drastic reduction in coherence from the values of respective BWC analysis, indicating a strong interrelationship between different variables and ET0. The interrelationship between meteorological variables and ET0 is more apparent at Tabriz, while it is controlled more by the local-scale meteorology at Urmia.

Imperata cylindrica (cogon grass).

2021 ◽  
Author(s):  
Chris Parker
Keyword(s):  
Plant Species ◽  
Environmental Conditions ◽  
Imperata Cylindrica ◽  
Environmental Damage ◽  
Native Plant ◽  
Natural Areas ◽  
Native Plant Species ◽  
Wide Range ◽  
Allelopathic Effects

Abstract I. cylindrica is a serious weed not only in crops but also in natural areas, causing serious economic and environmental damage. The ability of I. cylindrica to effectively compete for water and nutrients, spread and persist through the production of seeds and rhizomes that can survive a wide range of environmental conditions, and its allelopathic effects and pyrogenic nature, allow it to exclude native plant species and other desirable plants and dominate large areas of land.

Drift Comparisons of Low-Expansion Foams and Conventional Sprays

Weed Science ◽  
1973 ◽  
Vol 21 (5) ◽  
pp. 405-409 ◽  
Author(s):  
L. F. Bouse ◽  
R. E. Leerskov
Keyword(s):  
Wind Speed ◽  
Wind Tunnel ◽  
Environmental Conditions ◽  
Horizontal Wind ◽  
Low Speed ◽  
Spray Solution ◽  
Different Types ◽  
Expansion Foam

Experiments were conducted to compare the drift of low-expansion foam and conventional sprays in a low-speed horizontal wind tunnel under controlled environmental conditions. Dimensions of the tunnel were 1.30 m high, 0.61 m wide, and 7.32 m long. Wind speed was maintained at 1.52 m/sec. Drift was compared for spray solutions, with and without foam adjuvants, using several different types and sizes of air-inducting nozzles and three sizes of conventional fan nozzles. Large drops produced by the air-inducting nozzles, with and without foam adjuvant, resulted in significantly less drift beyond 1.83 and 6.10 m than sprays from the conventional fan nozzles. The addition of foam adjuvant to the spray solution resulted in increased drift beyond 1.83 m for sprays from the air-induction nozzles in several comparisons but did not result in a significant increase in the drift beyond 6.10 m.

scholarly journals Monitored data on occupants’ presence and actions in an office building

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Ardeshir Mahdavi ◽  
Christiane Berger ◽  
Farhang Tahmasebi ◽  
Matthias Schuss
Keyword(s):  
Wind Speed ◽  
Environmental Conditions ◽  
External Factors ◽  
Office Building ◽  
Data Set ◽  
Global Irradiance ◽  
Open Plan ◽  
Plug Loads ◽  
One Year ◽  
Development And Validation

AbstractWithin a study, an open plan area and one closed office in a university building with a floor area of around 200 m2 were monitored. The present data set covers a period of one year (from 2013-01-01 to 2013-12-31). The collected data pertains to indoor environmental conditions (temperature, humidity) as well as plug loads and external factors (temperature, humidity, wind speed, and global irradiance) along with occupants’ presence and operation of windows and lights. The monitored data can be used for multiple purposes, including the development and validation of occupancy-related models.

Sign in / Sign up

Export Citation Format

Share Document