scholarly journals ENERGIA RENOVÁVEL; UTILIZAÇÃO DE ENERGIA SOLAR PARA ACIONAMENTO DE TELHADO MÓVEL.

2021 ◽  
Vol 9 (209) ◽  
pp. 1-24
Author(s):  
Patricia Vianna dos Santos

The present work aims to exemplify a renewable and sustainable energy source as such the energy from sunlight to drive mobile coverage as a clean source of energy that does not cause damage to the environment, taking advantage of solar energy as a source of heat and light being one of the most propitious and reliable energies in the world. With the installation of solar panels at the roof top of houses, industries and plantations, the energy captured by the photovoltaic solar panel is sent to the load controller that powers the battery and the frequency inverter energizes the motor , allowing the activation of the cover with the objective of bringing greater comfort and satisfaction of our final client, people who want to have comfort in relation to their roofs, taking advantage of more than nature has to offer us, not only in homes but also in areas of leisure and entertainment, sheds, plantations and many other places that needs a roof, with the purpose of taking advantage of the sunlight, also saving the electric energy by making people aware of a more sustainable and renewable country. It is worth mentioning that in case of rain-sensitive plantations with the mobile cover, it will not be necessary to move to totally enclosed sheds, but in sheds using a structure such as that of the moving roof

2021 ◽  
Vol 17 (4) ◽  
Author(s):  
Eka Purwa Laksana ◽  
Yani Prabowo ◽  
Sujono Sujono ◽  
Rummi Sirait ◽  
Nifty Fath ◽  
...  

Indonesia is a tropical country located on the equator. The average intensity of solar radiation in Indonesia is 4.8 kWh/m2. This makes Indonesia a country with new and ren ewable energy potential, one of which is solar panel technology. The first step that must be done in the process of installing solar panels in a place is to analyze the potential of solar energy. In this study, an analysis of the potential of solar energy as a new renewable energy source has been carried out at Budi Luhur University, North Petukangan, South Jakarta. Based on the research results, the maximum photovoltaic efficiency that can be achieved is 21.45%. During the day, the efficiency of the solar panels increases along with the ncrease in the value of the voltage obtained. However, the higher the panel temperature, the lower the efficiency of the solar panel. Therefore, a cooling system is needed to anticipate this.


Author(s):  
Umang Deogade

Abstract: The most significant system for monitoring solar systems is the solar parameters monitoring system. Solar energy is a renewable energy source produced by solar panels. Solar energy is a renewable energy source produced by solar panels. Voltage, light intensity, and temperature are the parameters that the system measures. An Arduino Uno microcontroller board is used in the suggested monitoring system. Solar panel, LDR Sensor, LM 35, Arduino microcontroller, and resistors are used in the system. Light. LDR sensor is used to detect light intensity, L35 is used to measure temperature, and a voltage divider circuit is used to monitor voltage in this system. Keywords: Solar Panel, Monitoring, Renewable Energy, Solar Panel, Arduino Uno.


2020 ◽  
Vol 164 ◽  
pp. 13004
Author(s):  
Artem Subbotin ◽  
Viktoriya Larina ◽  
Vasilisa Salmina ◽  
Anastasiya Arzumanyan

This article discusses the use of the sun as an energy source. The most innovative and useful applications for various branches of human activity are presented today, as well as prospects for the development of this technology. Solar panels are used all over the world, and this article offers one of the options for using solar energy. This option can solve many problems of power supply in various remote areas from civilization, providing the most inaccessible places for Central power supply with lighting and video surveillance, allowing continuous monitoring of objects, which will help ensure safety for nature and humans. Video surveillance cameras and lighting powered by solar energy are economical to use, safe for the environment, and easy to install and operate.


Author(s):  
Riska Ekawita ◽  
Supiyati Supiyati ◽  
Elfi Yuliza

Bengkulu city has abundant solar energy that has not yet been utilized to optimize. Bengkulu people, especially the Muara Bangkahulu district, do not yet have the skills and knowledge to use solar panels to meet their daily electricity needs. In this activity, the workshop was carried out on the use and solar panel installation technique that could be used as an alternative source of electricity. Participants were the residents of RT.20/01, Pematang Gubernur sub-district, Muara Bangkahulu district, Bengkulu City. The workshop consisted of three main parts; they were filling out the questionnaire, presentation, and practice of installing a solar panel. The questionnaire was given at the time before and after the material and practice were done. Some household products that are using solar energy were delivered during the presentation. The next step was the installation practice of solar panels and their components. The questionnaire result shows that participants are attracted to use the solar panel as alternative electric energy. In addition, the community who initially has a limitation of knowledge to install a solar panel, after the workshop is carried out, they have the skill for that installation.


2021 ◽  
Vol 1808 (1) ◽  
pp. 012006
Author(s):  
Dian Wahyu Widyanto ◽  
Danar Susilo Wijayanto ◽  
Cucuk Wawan Budiyanto ◽  
Soenarto ◽  
Mochammad Bruri Triyono

SINERGI ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 73 ◽  
Author(s):  
Hamzah Eteruddin ◽  
Atmam Atmam ◽  
David Setiawan ◽  
Yanuar Z. Arief

People can make solar energy alternative energy by employing solar panels to generate electricity. The utilization of solar energy on a solar panel to generate electricity is affected by the weather and the duration of the radiation, and they will affect the solar panel’s temperature. There are various types of solar panels that can be found on the market today, including Mono-Crystalline and Poly-Crystalline. The difference in the material used needs to be observed in terms of temperature changes in the solar module. Our study’s findings showed that a change in the temperature would impact the solar panel’s output voltage, and the solar panel’s output voltage would change when it was connected to the load although the measured temperatures were almost the same.


Author(s):  
Ufuk Cebeci ◽  
Zehra Düzgit ◽  
Cansu Çavdar

Global warming affects everyone, and the effects will be more dangerous all over the world in time. Therefore, it is very important to use our world's limited resources and to prefer the renewable resources such as solar energy and wind energy. In this study, the authors consider an elevator system, which includes a solar-powered and conventional one with some new Internet-of-Things (IoT) features. The elevator may be operated by both electric energy and solar energy. Solar energy, as being a renewable energy source, leads to various benefits. Internet-of-Things-enabled elevator has a global system for mobile communications (GSM) module to send messages to pre-specified receivers in case of a power failure. The target performance measures are defined, and the advantages of the solar-powered smart elevator are explained.


Subject The outlook for the solar photovoltaic sector in China. Significance The EU's decision last month to remove tariffs on imported Chinese solar panels follows a US move to increase tariffs. It also comes at a time when international prices for panels are falling in response to a reduction of subsides for the deployment of solar photovoltaic (PV) capacity in China. Impacts Falling prices will stimulate further installation of solar PV capacity across the world, especially in sunny regions. Chinese manufacturers will further expand their capacity both at home and abroad. Non-Chinese PV manufacturers will find their profits squeezed even further unless they are protected by import controls. The rate of deployment of new solar PV capacity within China will decline, but still remain substantial.


2020 ◽  
Vol 5 (2) ◽  
pp. 108-117
Author(s):  
Soni A Kaban ◽  
Muhamad Jafri ◽  
Gusnawati Gusnawati

Abstrak Energi surya merupakan salah satu energi yang bias dikonversi menjadi energi listrik dengan menggunakan panel surya (photovoltaic solar). Pada penelitian ini, dirancang panel surya dengan cermin datar sebagai reflektor scanning dengan empat buah reflektor pada empat sisi panel surya. Tujuan yang ingin dicapai dalam penelitian ini yaitu untuk mendapatkan keluaran panel surya yang optimal menggunakan cemin sebagai media reflektornya dan mendapatkan konfigurasi penempatan cermin untuk meningkatkan keluaran arus dan tegangan panel surya. Metode yang digunakan dalam penelitian ini adalah metode eksperimen dengan melakukan percobaan terhadap objek bahan penelitian dengan kemiringan reflektor cermin 30o, 45o, dan 60o. Dengan penambahan reflector cermin pada panel surya menyebabkan peningkatan keluaran panel surya pada pukul 12.00 Wita. Panel tanpa reflektor mengahasilkan Arus 2,1 Ampere, Tegangan 6,52 Volt. Panel reflektor 30o menghasilkan Arus 1,89 Ampere, Tegangan 6,25 Volt, Panel reflektor 45o, Arus 2,33 Ampere, Tegangan 6,15 Volt dan Panel reflektor Arus 3,02 Ampere, dan Tegangan 6,41 Volt.Kata kunci: Energi; fotovoltaik; panel surya; cermin. Abstract Solar energy is one of the energies that can be converted into electrical energy using solar panels (photovoltaic solar). In this study, a solar panel with a flat mirror as a scanning reflector was designed with four reflectors on the four sides of the solar panel. The objectives to be achieved in this study are to obtain optimal solar panel output using the mirror as a reflector medium and obtain a mirror placement configuration to increase the current and voltage output of the solar panels. The method used in this research is an experimental method by conducting experiments on the object of the research material with a mirror reflector tilt of 30o, 45o, and 60o. With the addition of a mirror reflector on the solar panel, it causes an increase in the output of the solar panel at 12.00 GMT+08. The panel without a reflector produces a current of 2.1 Ampere, a voltage of 6.52 volts. The 30o-reflector panel produces a current of 1.89 Amperes, a Voltage of 6.25 Volts, a 450 Reflector Panel, a Current of 2.33 Amperes, a Voltage of 6.15 Volts and a Current 3.02 Amperes of Reflector Panel, and a Voltage of 6.41 Volts. Keywords: Energy; photovoltaic; solar panel; mirror


2015 ◽  
Vol 11 (1) ◽  
pp. 9-28
Author(s):  
I. Patay ◽  
M. Montvajszki

Water pumping for irrigation has a relatively high energy demand, depending on the applied irrigation method. At the same time, there is a considerable energy from the sun during the irrigation period. The solar PV (photovoltaic) technology may be suitable to ensure electric energy for pumping in many cases in agriculture, where the electric network is not available or reduction of the energy costs is wanted. There are some pilot plants for water pumping on the base of solar energy in the world and the spreading of these solar technologies is predictable. The solar energy based pumping process can be approached both in theoretical and experimental ways. In this paper, both the theoretical questions of the solar based pumping process and the experimental results of a model testing pump station powered by PV panels are shown.


Sign in / Sign up

Export Citation Format

Share Document