scholarly journals Eco-efficient blended cements with high volume supplementary cementitious materials

2020 ◽  
Vol 18 (4) ◽  
pp. 005-014
Author(s):  
Myroslav Sanytsky ◽  
Tetiana Kropyvnytska ◽  
Hanna Ivashchyshyn ◽  
Оksana Rykhlitska
Keyword(s):  
Development Strategy ◽  
Optimal Solution ◽  
High Volume ◽  
Cementitious Materials ◽  
Economic Benefits ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Low Carbon ◽  
Blended Cements ◽  
Granulated Blast Furnace Slag

The ways of reducing CO2 emissions in the cement industry were analysed for the purposes of implementation of the low carbon development strategy. The optimal solution to this problem is the technologically optimised blended cements with high volume of supplementary cementitious materials of various genesis and fineness. The design of eco-friendly blended cements was achieved by a synergistic combination of the main constituents such as granulated blast furnace slag, superfine zeolite, fly ash and limestone, as well as by optimisation of the their granulometric composition, taking into account their bimodal particle size distribution by volume and surface area. Moreover, the article presents the technical, environmental and economic benefits of using eco-efficient blended cements.

scholarly journals Sustainable low-carbon binders and concretes

2020 ◽  
Vol 166 ◽  
pp. 06007
Author(s):  
Myroslav Sanytsky ◽  
Tetiana Kropyvnytska ◽  
Stanislav Fic ◽  
Hanna Ivashchyshyn
Keyword(s):  
Activity Index ◽  
Chemical Properties ◽  
High Volume ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Cement Matrix ◽  
Low Carbon ◽  
Blended Cements ◽  
Physical And Chemical

Sustainable development depends on a consistency of interests, social, ecological and economic, and that the interests are evaluated in a balanced manner. In order to reduce CO2 emissions, the conception of decreasing clinker factor and increasing the role of supplementary cementitious materials (SCMs) in the cementitious materials has high economical and environmental efficiency. The performance of clinkerefficient blended cements with supplementary cementitious materials were examined. The influence of superfine zeolite with increased surface energy on the physical and chemical properties of low-carbon blended cements is shown. Increasing the dispersion of cementitious materials contributes to the growth of their strength activity index due to compaction of cement matrix and pozzolanic reactions in unclincker part. In consequence of the early structure formation and the directed formation of the microstructure of the cement matrix is solving the problem of obtaining clinker-efficient concretes. Shown that low-carbon blended cements with high volume of SCMs are suitable, in principle, for producing structural concretes.

scholarly journals Assessing, Understanding and Unlocking Supplementary Cementitious Materials

2016 ◽  
Vol 1 ◽  
pp. 50 ◽  
Author(s):  
Ruben Snellings
Keyword(s):  
Co2 Emissions ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
New Materials ◽  
Cement Production ◽  
Blended Cements ◽  
International Commitments ◽  
Roll Out

The partial replacement of Portland clinker by supplementary cementitious materials (SCM) is one of the most popular and effective measures to reduce both costs and CO2 emissions related to cement production. An estimated 800 Mt/y of blast furnace slags, fly ashes and other materials are currently being used as SCM, but still the cement industry accounts for 5-8% of global CO2 emissions. If no further actions are taken, by the year 2050 this share might even rise beyond 25%. There is thus a clear challenge as to how emissions will be kept at bay and sustainability targets set by international commitments and policy documents will be met.Part of the solution will be a further roll-out of blended cements in which SCMs constitute the main part of the binder to which activators such as Portland cement are added. Since supply concerns are being raised for conventional high-quality SCMs it is clear that new materials and beneficiation technologies will need to step in to achieve further progress. This paper presents opportunities and challenges for new SCMs and demonstrates how advances towards more powerful and reliable characterisation techniques help to better understand and exploit SCM reactivity.

Effect of ground granulated blast funrnace slag and fly ash on strength, permeability, and under-water abrasion of fine-grained concrete

2020 ◽  
Vol 71 (7) ◽  
pp. 775-788
Author(s):  
Quyet Truong Van ◽  
Sang Nguyen Thanh
Keyword(s):  
Fly Ash ◽  
Concrete Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Chloride Permeability ◽  
Cement Replacement ◽  
Fine Grained ◽  
Granulated Blast Furnace Slag ◽  
Compressive Strength Test ◽  
Economic Ground

The utilisation of supplementary cementitious materials (SCMs) is widespread in the concrete industry because of the performance benefits and economic. Ground granulated blast furnace slag (GGBFS) and fly ash (FA) have been used as the SCMs in concrete for reducing the weight of cement and improving durability properties. In this study, GGBFS at different cement replacement ratios of 0%, 20%, 40% and 60% by weight were used in fine-grained concrete. The ternary binders containing GGBFS and FA at cement replacement ratio of 60% by weight have also evaluated. Flexural and compressive strength test, rapid chloride permeability test and under-water abrasion test were performed. Experimental results show that the increase in concrete strength with GGBFS contents from 20% to 40% but at a higher period of maturity (56 days and more). The chloride permeability the under-water abrasion reduced with the increasing cement replacement by GGBFS or a combination of GGBFS and FA

scholarly journals Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

2021 ◽  
Vol 13 (7) ◽  
pp. 3979
Author(s):  
Rosa María Tremiño ◽  
Teresa Real-Herraiz ◽  
Viviana Letelier ◽  
Fernando G. Branco ◽  
José Marcos Ortega
Keyword(s):  
Diffusion Coefficient ◽  
Water Absorption ◽  
Glass Powder ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Waste Glass ◽  
Supplementary Cementitious Materials ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Waste Glass Powder

One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion.

Use of Algerian Natural Mineral Deposit as Supplementary Cementitious Materials

2018 ◽  
Vol 34 ◽  
pp. 48-58 ◽  
Author(s):  
Karima Arroudj ◽  
Saida Dorbani ◽  
Mohamed Nadjib Oudjit ◽  
Arezki Tagnit-Hamou
Keyword(s):  
Mechanical Strength ◽  
Calcium Hydroxide ◽  
Cement Paste ◽  
Cementitious Materials ◽  
Pozzolanic Reaction ◽  
Heat Of Hydration ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Natural Mineral ◽  
Different Ages

Much of the current research on concrete engineering has been focused on including siliceous additions as supplementary cementitious materials (SCMs). Silica reacts with Calcium hydroxide release during cement hydration, and produces more C-S-H. The latter contributes to increase compactness, mechanical strengths and sustainability of concrete. This paper explores the hydration characteristics of cement paste based on various natural mineral additions, that are very abundant in Algeria and present a high silica content (ground natural pozzolana “PZ” and ground dune sand “DS”). For this purpose, several analyses were carried out on modified cement pastes and mortars. TheseSCMswere introduced by replacement levels of 15, 20 and 25 by weight of cement. We first, studied the effect of these SCMs on the heat of hydration and mechanical strength of mortars at different ages. The evolution of hydration of modified paste was studied, by using Thermal analysis (TG/TDA) at different ages, to analyze the Calcium Hydroxide (CH) content of the modified pastes. It is shown that the CH content of the mixes including SCMs is lower than that of the plain cement paste, indicating that silica reacts with the cement paste through a pozzolanic reaction. Increased pozzolanic activity results in higher amounts of Calcium Silicate Hydrate in the paste, which in turn results in higher compressive strength for modified cement mortars. Due to its crystalline morphology, the ground DS particles present a partial pozzolanic effect, compared to PZ which is semi-crystalline. Modified mortars by 20% DS can be the optimal composition. It presents satisfactory results: good mechanical strength and low heat of hydration. It can lead to an economic and sustainable concrete. Ground DS is very abounded in Africa and free of any impurities and can be a good alternativeSCMsin cement industry.

scholarly journals Utilization of tailings in cement and concrete: A review

2019 ◽  
Vol 26 (1) ◽  
pp. 449-464 ◽  
Author(s):  
Mifeng Gou ◽  
Longfei Zhou ◽  
Nathalene Wei Ying Then
Keyword(s):  
Compressive Strength ◽  
Cementitious Materials ◽  
Solid Wastes ◽  
Supplementary Cementitious Materials ◽  
Cement Clinker ◽  
Fine Aggregate ◽  
Granulated Blast Furnace Slag ◽  
Fine Aggregates ◽  
Compressive Strength Of Concrete ◽  
Cement And Concrete

AbstractOne of the advantages of cement and the cement concrete industry in sustainability is the ability to utilize large amounts of industrial solid wastes such as fly ash and ground granulated blast furnace slag. Tailings are solid wastes of the ore beneficiation process in the extractive industry and are available in huge amounts in some countries. This paper reviews the potential utilization of tailings as a replacement for fine aggregates, as supplementary cementitious materials (SCMs) in mortar or concrete, and in the production of cement clinker. It was shown in previous research that while tailings had been used as a replacement for both fine aggregate and cement, the workability of mortar or concrete reduced. Also, at a constant water to cement ratio, the compressive strength of concrete increased with the tailings as fine aggregate. However, the compressive strength of concrete decreased as the replacement content of the tailings as SCMs increased, even whentailings were ground into smaller particles. Not much research has been dedicated to the durability of concrete with tailings, but it is beneficial for heavy metals in tailings to stabilize/solidify in concrete. The clinker can be produced by using the tailings, even if the tailings have a low SiO2 content. As a result, the utilization of tailings in cement and concrete will be good for the environment both in the solid waste processing and virgin materials using in the construction industry.

scholarly journals Study of Hydration and Microstructure of Mortar Containing Coral Sand Powder Blended with SCMs

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4248
Author(s):  
Xingxing Li ◽  
Ying Ma ◽  
Xiaodong Shen ◽  
Ya Zhong ◽  
Yuwei Li
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Silica Fume ◽  
Dilution Effect ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Limestone Powder ◽  
Chemical Effect ◽  
Granulated Blast Furnace Slag ◽  
Coral Sand

The utilization of coral waste is an economical way of using concrete in coastal and offshore constructions. Coral waste with more than 96% CaCO3 can be ground to fines and combined with supplementary cementitious materials (SCMs) such as fly ash, silica fume, granulated blast furnace slag in replacing Portland cement to promote the properties of cement concrete. The effects of coral sand powder (CSP) compared to limestone powder (LSP) blended with SCMs on hydration and microstructure of mortar were investigated. The result shows CSP has higher activity than LSP when participating in the chemical reaction. The chemical effect among CSP, SCMs, and ordinary Portland cement (OPC) results in the appearance of the third hydration peak, facilitating the production of carboaluminate. CSP-SCMs mortar has smaller interconnected pores on account of the porous character of CSP as well as the filler and chemical effect. The dilution effect of CSP leads to the reduction of compressive strength of OPC-CSP and OPC-CSP-SCMs mortars. The synergic effects of CSP with slag and silica fume facilitate the development of compressive strength and lead to a compacted isolation and transfer zone (ITZ) in mortar.

Sign in / Sign up

Export Citation Format

Share Document