scholarly journals Assessing, Understanding and Unlocking Supplementary Cementitious Materials

2016 ◽  
Vol 1 ◽  
pp. 50 ◽  
Author(s):  
Ruben Snellings
Keyword(s):  
Co2 Emissions ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
New Materials ◽  
Cement Production ◽  
Blended Cements ◽  
International Commitments ◽  
Roll Out

The partial replacement of Portland clinker by supplementary cementitious materials (SCM) is one of the most popular and effective measures to reduce both costs and CO2 emissions related to cement production. An estimated 800 Mt/y of blast furnace slags, fly ashes and other materials are currently being used as SCM, but still the cement industry accounts for 5-8% of global CO2 emissions. If no further actions are taken, by the year 2050 this share might even rise beyond 25%. There is thus a clear challenge as to how emissions will be kept at bay and sustainability targets set by international commitments and policy documents will be met.Part of the solution will be a further roll-out of blended cements in which SCMs constitute the main part of the binder to which activators such as Portland cement are added. Since supply concerns are being raised for conventional high-quality SCMs it is clear that new materials and beneficiation technologies will need to step in to achieve further progress. This paper presents opportunities and challenges for new SCMs and demonstrates how advances towards more powerful and reliable characterisation techniques help to better understand and exploit SCM reactivity.

scholarly journals The Influence of Chemical Activators on the Hydration Behavior and Technical Properties of Calcium Sulfoaluminate Cements Blended with Ground Granulated Blast Furnace Slags

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 268
Author(s):  
Milena Marroccoli ◽  
Antonio Telesca
Keyword(s):  
Blast Furnace ◽  
Co2 Emissions ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
X Ray Diffraction ◽  
Cement Production ◽  
Blended Cements ◽  
Calcium Sulfoaluminate ◽  
Technical Performance ◽  
Technical Properties

The manufacture of Ordinary Portland cement (OPC) generates around 8% of the global CO2 emissions related to human activities. The last 20 years have seen considerable efforts in the research and development of methods to lower the carbon footprint associated with cement production. Specific focus has been on limiting the use of OPC and employing alternative binders, such as calcium sulfoaluminate (CSA) cements, namely special hydraulic binders obtained from non-Portland clinkers. CSA cements could be considered a valuable OPC alternative thanks to their distinctive composition and technical performance and the reduced environmental impact of their manufacturing process. To additionally reduce CO2 emissions, CSA cements can also be blended with supplementary cementitious materials. This paper investigates the influence of two separately added chemical activators (NaOH or Na2CO3) on the technical properties and hydration behavior of four CSA blended cements obtained by adding to a plain CSA cement two different ground granulated blast furnace slags. Differential thermal-thermogravimetric, X-ray diffraction and mercury intrusion porosimetry analyses were done, along with shrinkage/expansion and compressive strength measurements.

scholarly journals Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1112 ◽  
Author(s):  
Suvash Chandra Paul ◽  
Peter Mbewe ◽  
Sih Kong ◽  
Branko Šavija
Keyword(s):  
Developing Countries ◽  
Cementitious Materials ◽  
Agricultural Wastes ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Engineering Properties ◽  
Partial Replacement ◽  
Cement Production ◽  
Cement Replacement ◽  
Concrete Production

Concrete production utilizes cement as its major ingredient. Cement production is an important consumer of natural resources and energy. Furthermore, the cement industry is a significant CO2 producer. To reduce the environmental impact of concrete production, supplementary cementitious materials such as fly ash, blast furnace slag, and silica fume are commonly used as (partial) cement replacement materials. However, these materials are industrial by-products and their availability is expected to decrease in the future due to, e.g., closing of coal power plants. In addition, these materials are not available everywhere, for example, in developing countries. In these countries, industrial and agricultural wastes with pozzolanic behavior offer opportunities for use in concrete production. This paper summarizes the engineering properties of concrete produced using widespread agricultural wastes such as palm oil fuel ash, rice husk ash, sugarcane bagasse ash, and bamboo leaf ash. Research on cement replacement containing agricultural wastes has shown that there is great potential for their utilization as partial replacement for cement and aggregates in concrete production. When properly designed, concretes containing these wastes have similar or slightly better mechanical and durability properties compared to ordinary Portland cement (OPC) concrete. Thus, successful use of these wastes in concrete offers novel sustainable materials and contributes to greener construction as it reduces the amount of waste, while also minimizing the use of virgin raw materials for cement production. This paper will help the concrete industry choose relevant waste products and their optimum content for concrete production. Furthermore, this study identifies research gaps which may help researchers in further studying concrete based on agricultural waste materials.

scholarly journals The Effect of SCMs in Blended Cements on Sorption Characteristics of Superabsorbent Polymers

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1609
Author(s):  
Rohollah Rostami ◽  
Agnieszka J. Klemm ◽  
Fernando C. R. Almeida
Keyword(s):  
Portland Cement ◽  
Chemical Properties ◽  
Blended Cement ◽  
Cementitious Materials ◽  
Absorption Capacity ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Chemical Compositions ◽  
Superabsorbent Polymers ◽  
Blended Cements

Supplementary cementitious materials (SCMs), such as fly ash (FA) and ground granulated blast-furnace slag (GGBS), are often used as a partial replacement of cements to improve the sustainability of Portland cement-based materials and reduce their environmental impact. Superabsorbent polymers (SAPs) can be successfully used as internal curing agents in ultra-high performance cementitious materials by facilitating the hydration process and controlling the water supply in both fresh and hardened states. This paper intends to characterise the physical and chemical properties of SAPs and their sorption properties in different blended cement environments. The swelling capacity and kinetics of absorption of three superabsorbent polymers with different chemical compositions and grading were tested in different cement environments. Experimental results of their sorption performance in distinct solutions, including deionised water (DI), Portland cement (PC), and blended cements (PC-FA and PC-GGBS) and changes in pH of different solutions over time were investigated. The results showed that PC-FA solution had the lowest pH followed by PC-GGBS solution. Moreover, SAPs samples displayed the highest absorption capacities in PC-FA solutions, and the lowest swelling capacities were found in PC-GGBS solutions. Furthermore, SAP with smaller particle sizes had the greatest absorption capacity values in all solutions.

scholarly journals Eco-efficient blended cements with high volume supplementary cementitious materials

2020 ◽  
Vol 18 (4) ◽  
pp. 005-014
Author(s):  
Myroslav Sanytsky ◽  
Tetiana Kropyvnytska ◽  
Hanna Ivashchyshyn ◽  
Оksana Rykhlitska
Keyword(s):  
Development Strategy ◽  
Optimal Solution ◽  
High Volume ◽  
Cementitious Materials ◽  
Economic Benefits ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Low Carbon ◽  
Blended Cements ◽  
Granulated Blast Furnace Slag

The ways of reducing CO2 emissions in the cement industry were analysed for the purposes of implementation of the low carbon development strategy. The optimal solution to this problem is the technologically optimised blended cements with high volume of supplementary cementitious materials of various genesis and fineness. The design of eco-friendly blended cements was achieved by a synergistic combination of the main constituents such as granulated blast furnace slag, superfine zeolite, fly ash and limestone, as well as by optimisation of the their granulometric composition, taking into account their bimodal particle size distribution by volume and surface area. Moreover, the article presents the technical, environmental and economic benefits of using eco-efficient blended cements.

scholarly journals Use of Potabilized Water Sludge in the Production of Low-Energy Blended Calcium Sulfoaluminate Cements

2021 ◽  
Vol 11 (4) ◽  
pp. 1679
Author(s):  
Antonio Telesca ◽  
Neluta Ibris ◽  
Milena Marroccoli
Keyword(s):  
Co2 Emissions ◽  
Carbon Footprint ◽  
Energy Demand ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
X Ray Diffraction ◽  
Hydration Properties ◽  
Blended Cements ◽  
Calcium Sulfoaluminate ◽  
Pozzolanic Material

Ordinary Portland cement (OPC) manufacture determines about 8% of the global anthropogenic CO2 emissions. This has led to both the cement producers and the scientific community to develop new cementitious materials with a reduced carbon footprint. Calcium sulfoaluminate (CSA) cements are special hydraulic binders from non-Portland clinkers; they represent an important alternative to OPC due to their peculiar composition and significantly lower impact on the environment. CSA cements contain less limestone and require lower synthesis temperatures, which means a reduced kiln thermal energy demand and lower CO2 emissions. CSA cements can also be mixed with supplementary cementitious materials (SCMs) which further reduce the carbon footprint. This article was aimed at evaluating the possibility of using different amounts (20 and 35% by mass) of water potabilization sludges (WPSs) as SCM in CSA-blended cements. WPSs were treated thermally (TT) at 700° in order to obtain an industrial pozzolanic material. The hydration properties and the technical behavior of two different CSA-blended cements were investigated using differential thermal–thermogravimetric and X-ray diffraction analyses, mercury intrusion porosimetry, shrinkage/expansion and compressive strength measurements. The results showed that CSA binders containing 20% by mass of TTWPSs exhibited technological properties similar to those relating to plain CSA cement and were characterized by more pronounced eco-friendly features.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals Use of Treated Non-Ferrous Metallurgical Slags as Supplementary Cementitious Materials in Cementitious Mixtures

2021 ◽  
Vol 11 (9) ◽  
pp. 4028
Author(s):  
Asghar Gholizadeh Vayghan ◽  
Liesbeth Horckmans ◽  
Ruben Snellings ◽  
Arne Peys ◽  
Priscilla Teck ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Strength Development ◽  
Supplementary Cementitious Material ◽  
Performance Requirements ◽  
Metallurgical Slags ◽  
Leaching Behaviour ◽  
Kinetics Of

This research investigated the possibility of using metallurgical slags from the copper and lead industries as partial replacement for cement. The studied slags were fayalitic, having a mainly ferro-silicate composition with minor contents of Al2O3 and CaO. The slags were treated at 1200–1300 °C (to reduce the heavy metal content) and then granulated in water to promote the formation of reactive phases. A full hydration study was carried out to assess the kinetics of reactions, the phases formed during hydration, the reactivity of the slags and their strength activity as supplementary cementitious material (SCM). The batch-leaching behaviour of cementitious mixtures incorporating treated slags was also investigated. The results showed that all three slags have satisfactory leaching behaviour and similar performance in terms of reactivity and contribution to the strength development. All slags were found to have mediocre reactivity and contribution to strength, especially at early ages. Nonetheless, they passed the minimum mechanical performance requirements and were found to qualify for use in cement.

scholarly journals Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

2021 ◽  
Vol 13 (7) ◽  
pp. 3979
Author(s):  
Rosa María Tremiño ◽  
Teresa Real-Herraiz ◽  
Viviana Letelier ◽  
Fernando G. Branco ◽  
José Marcos Ortega
Keyword(s):  
Diffusion Coefficient ◽  
Water Absorption ◽  
Glass Powder ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Waste Glass ◽  
Supplementary Cementitious Materials ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Waste Glass Powder

One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion.

scholarly journals The Potentials of Iron and Steel Slags as Supplementary Cementitious Materials in the Nigerian Construction Industry: A Review

2018 ◽  
Vol 2 (2) ◽  
pp. 208-218
Author(s):  
O. R. Ogirigbo ◽  
J. O. Ukpata ◽  
I. Inerhunwa
Keyword(s):  
Portland Cement ◽  
Construction Industry ◽  
Waste Product ◽  
Steel Production ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Iron And Steel ◽  
Tropical Environments ◽  
Iron And Steel Production

Ground Granulated Blast Furnace Slag (GGBS) is a type of Supplementary Cementitious Material (SCM) that is currently being used extensively in the global construction industry. SCMs are cheaper than Portland cement, help to improve certain properties of concrete and also help to reduce the environmental footprint associated with the production of Portland cement. GGBS is readily available in most parts of the world as a waste product from iron and steel production. However, its use as a SCM in some countries has not been fully maximized. This is primarily because of lack of documented studies on the properties of GGBS that influences its suitability as a SCM, especially in tropical environments. This paper reviewed the use of GGBS as a SCM for the partial replacement of Portland cement, with particular emphasis on its potential use in tropical warm environments such as Nigeria and other similar countries.

Use of Algerian Natural Mineral Deposit as Supplementary Cementitious Materials

2018 ◽  
Vol 34 ◽  
pp. 48-58 ◽  
Author(s):  
Karima Arroudj ◽  
Saida Dorbani ◽  
Mohamed Nadjib Oudjit ◽  
Arezki Tagnit-Hamou
Keyword(s):  
Mechanical Strength ◽  
Calcium Hydroxide ◽  
Cement Paste ◽  
Cementitious Materials ◽  
Pozzolanic Reaction ◽  
Heat Of Hydration ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Natural Mineral ◽  
Different Ages

Much of the current research on concrete engineering has been focused on including siliceous additions as supplementary cementitious materials (SCMs). Silica reacts with Calcium hydroxide release during cement hydration, and produces more C-S-H. The latter contributes to increase compactness, mechanical strengths and sustainability of concrete. This paper explores the hydration characteristics of cement paste based on various natural mineral additions, that are very abundant in Algeria and present a high silica content (ground natural pozzolana “PZ” and ground dune sand “DS”). For this purpose, several analyses were carried out on modified cement pastes and mortars. TheseSCMswere introduced by replacement levels of 15, 20 and 25 by weight of cement. We first, studied the effect of these SCMs on the heat of hydration and mechanical strength of mortars at different ages. The evolution of hydration of modified paste was studied, by using Thermal analysis (TG/TDA) at different ages, to analyze the Calcium Hydroxide (CH) content of the modified pastes. It is shown that the CH content of the mixes including SCMs is lower than that of the plain cement paste, indicating that silica reacts with the cement paste through a pozzolanic reaction. Increased pozzolanic activity results in higher amounts of Calcium Silicate Hydrate in the paste, which in turn results in higher compressive strength for modified cement mortars. Due to its crystalline morphology, the ground DS particles present a partial pozzolanic effect, compared to PZ which is semi-crystalline. Modified mortars by 20% DS can be the optimal composition. It presents satisfactory results: good mechanical strength and low heat of hydration. It can lead to an economic and sustainable concrete. Ground DS is very abounded in Africa and free of any impurities and can be a good alternativeSCMsin cement industry.

Sign in / Sign up

Export Citation Format

Share Document