scholarly journals Strength Characteristics of Slag Based Steel Fiber Reinforced Concrete with Partial Replacement of Steel Slag in Coarse Aggregate

2019 ◽  
Vol 8 (3) ◽  
pp. 3449-3452 ◽  
Keyword(s):  
Coarse Aggregate ◽  
Steel Fiber ◽  
Flexural Rigidity ◽  
Research Work ◽  
Steel Slag ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Partial Replacement ◽  
Experimental Program ◽  
Stone Dust

The current research work represents the various test results from an experimental program for the influence of mineral admixture, stone dust, steel slags and rapid hardening (accelerator) type of chemical admixtures along with the inclusion of steel fibers for various mixture proportions on the mechanical properties of concrete. The different strength properties considered the cubical size for compressive strength, prism for flexural rigidity and monitored the ultrasonic pulse velocity test including water absorption (sorptivity) test for different curing days was evaluated. The outcome results for concrete shows that when the percentage of steel slag is increased then there will be a good workability in fresh concrete than normal aggregates. In overall 100% of stone dust, if the portion of steel slag is more than 40% with replacement of coarse aggregate and binding material as slag will lead to minimum workability, there is no change in the proceding workability area in the further addition of super plasticizer. Also, the study indicates that the crimped steel fiber matrix interaction gives considerable results to enhance the bending stress in flexural rigidity caused by the introducing of steel fibers.

scholarly journals Effect of fiber amount and stirrup ratio on shear resistance of steel fiber reinforced concrete deep beams

2021 ◽  
Vol 15 (2) ◽  
pp. 1-13
Author(s):  
Thang Do-Dai ◽  
Duong T. Tran ◽  
Long Nguyen-Minh
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Shear Crack ◽  
Shear Resistance ◽  
Shear Capacity ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Experimental Program ◽  
Deep Beam ◽  
Deep Beams

This paper deals with the effect of steel fiber amounts and the interaction between the fiber amount and stirrup ratio on the shear behavior and capacity of reinforced concrete (RC) deep beams with steel fibers. The experimental program was carried out on twelve deep beams with different fiber amounts (0, 30, 40, and 65 kg/m3) and stirrup ratios (0.1, 0.15, and 0.25%). The test results have shown that the use of steel fibers increased the shear resistance (up to 55%), reduced the shear crack width (up to 11 times) and deflection (up to 57%) of the tested deep beams. Also, it was found that using unsuitable steel fiber amount and stirrup ratio would reduce the efficiency of the fibers in a deep beam due to the interaction between the fibers and stirrups. Increasing the stirrup ratio in a deep beam with a high amount of steel fibers can reduce the efficacy of the fibers in enhancing the shear capacity of the beam. The most cost-effective steel fiber amount was found to be around 30 to 45 kg/m3. Keywords: steel fibers; deep beam; shear capacity; fiber amount; stirrup ratio.

scholarly journals Effects of Groove and Steel Fiber on Shear Properties of Concrete with Recycled Coarse Aggregate

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4537
Author(s):  
Danying Gao ◽  
Yongming Yan ◽  
Yuyang Pang ◽  
Jiyu Tang ◽  
Lin Yang ◽  
...  
Keyword(s):  
Shear Strength ◽  
Coarse Aggregate ◽  
Steel Fiber ◽  
Peak Load ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Shear Properties ◽  
Recycled Coarse Aggregate ◽  
The Relationship

In this paper, a series of shear specimens with or without groove were manufactured to mainly analyze the effects of grooves (or shear section height) and steel fibers on the shear properties of concrete with recycled coarse aggregate through double-side direct shear test. In addition, the relationship between the shear strength and the compressive strength and splitting tensile strength of steel fiber reinforced concrete with recycled coarse aggregate (SFRCAC) was also discussed. The experimental results showed that the peak load, deformation corresponding to the peak load and calculated shear strength of the specimens with grooves were lower than those of the specimens without grooves. The steel fiber and recycled coarse aggregate (RCA) had a significant effect on the shear properties of SFRCAC. As the volume content of steel fibers increased, the shear strength of SFRCAC and the corresponding deformation increased gradually. With the replacement ratio of RCA increasing, the shear strength of SFRCAC decreased but the corresponding deformation increased gradually. Finally, the formula for calculating the shear strength of SFRCAC was proposed by analyzing and fitting the test results and the data of related literature.

scholarly journals Effects of Steel Fibers Geometry on the Mechanical Properties of SIFCON Concrete

2020 ◽  
Vol 6 (1) ◽  
pp. 21-33 ◽  
Author(s):  
Shahad S. Khamees ◽  
Mohammed M. Kadhum ◽  
Nameer A. Alwash
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Partial Replacement ◽  
Fiber Volume ◽  
Fiber Network ◽  
Static Modulus ◽  
Static Modulus Of Elasticity

This research aims to shed light on the effect of steel fiber shape, length, diameter, and aspect ratio on the mechanical properties of slurry infiltration fiber reinforced concrete (SIFCON). This study comprised of casting and testing three groups of SIFCON specimens with 6% fiber volume fraction. The first group was reinforced with micro steel fiber, other reinforced by hook end steel fibers, while the last group of specimens reinforced by mixing two shape of steel fiber as hybrid fiber (3% micro steel fiber +3% hook end steel fiber). Silica fume was used as a partial replacement (10%) by weight of cement. 3.7% super plasticizer was used to make the slurry liquid enough to penetrate through the fiber network, while the w/c ratio kept constant at 0.33. It was found from the results achieved that the compressive strength, static modulus of elasticity, splitting tensile strength and toughness are extremely affected by the geometry of fibers because the network of fibers formed and their density depends on the size and shape of fibers. Where the values of micro steel fibers are far outweighing the values of hooked end fibers. It was also deduced from empiricism results that combining long and short fibers gives excellent results.

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Experimental Research on Reinforcing Effect of Spiral Steel Fiber

2012 ◽  
Vol 174-177 ◽  
pp. 668-671
Author(s):  
He Ting Zhou
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Experimental Research ◽  
Significant Role ◽  
Steel Fiber ◽  
Cement Mortar ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Reinforcing Effect

Steel fiber has a fine nature in reinforcing concrete. This essay aims to find out the influence of physical forms of steel fiber on its nature of reinforcement. By comparing two types of cement mortar reinforced by steel fibers, it is found that spiral steel fibers have a better bond strength with matrix than straight ones. Therefore, a conclusion could be drawn that physical forms of the steel fiber play a significant role in steel fiber reinforced concrete, and the experiment also serves a rewarding reference to the application of spiral steel fibers.

scholarly journals Experimental analysis of steel fiber reinforced concrete beams in shear

2022 ◽  
Vol 15 (3) ◽  
Author(s):  
Aaron Kadima Lukanu Lwa Nzambi ◽  
Dênio Ramam Carvalho de Oliveira ◽  
Marcus Vinicius dos Santos Monteiro ◽  
Luiz Felipe Albuquerque da Silva
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Reinforcement Ratio ◽  
Steel Fibers ◽  
Reinforced Concrete Beams ◽  
Experimental Program ◽  
Longitudinal Reinforcement ◽  
Fiber Addition

Abstract Some normative recommendations are conservative in relation to the shear strength of reinforced concrete beams, not directly considering the longitudinal reinforcement rate. An experimental program containing 8 beams of (100 x 250) mm2 and a length of 1,200 mm was carried out. The concrete compression strength was 20 MPa with and without 1.00% of steel fiber addition, without stirrups and varying the longitudinal reinforcement ratio. Comparisons between experimental failure loads and main design codes estimates were assessed. The results showed that the increase of the longitudinal reinforcement ratio from 0.87% to 2.14% in beams without steel fiber led to an improvement of 59% in shear strength caused by the dowel effect, while the corresponding improvement was of only 22% in fibered concrete beams. A maximum gain of 109% in shear strength was observed with the addition of 1% of steel fibers comparing beams with the same longitudinal reinforcement ratio (1.2%). A significant amount of shear strength was provided by the inclusion of the steel fibers and allowed controlling the propagation of cracks by the effect of stress transfer bridges, transforming the brittle shear mechanism into a ductile flexural one. From this, it is clear the shear benefit of the steel fiber addition when associated to the longitudinal reinforcement and optimal values for this relationship would improve results.

scholarly journals Valorization of Specially Designed Concrete by Using Sugarcane Bagasse Ash and Inducing the Special Benefits of Waste Tin Fiber Reinforced Concrete

2019 ◽  
Vol 8 (12) ◽  
pp. 220-224
Keyword(s):  
Tensile Strength ◽  
Portland Cement ◽  
Sugarcane Bagasse ◽  
Flexural Rigidity ◽  
Research Work ◽  
Fiber Reinforced Concrete ◽  
Target Strength ◽  
Test Results ◽  
Split Tensile Strength ◽  
Sugarcane Bagasse Ash

This research work has been investigated the agriculture solid waste of sugarcane bagasse ash (SCBA) materials replacing Portland cement and produces the assured quality of concrete. The current research work for various mixes of experimental test results shows the higher compressive strength was 37.51MPa at 28-days, 38.10 MPa at 56-days, the best mix consisting of SCBA (wet sieving method) content up to 15% (by weight of binding materials) along with 1.5% of waste tin fibers and also an excellent improvement trend was noted in flexural rigidity of concrete to addition of tin fibers shows the higher bending stress for all mixes except reference as well as more than 15% of SCBA concrete at different curing days. However, this study focused on the indirect measurement of tensile strength in SCBA concrete obtained the higher split tensile strength was 3.75MPa at 28-days, 3.95MPa at 56-days. It is concluded based on the various test results for different curing days the optimum replacement level of SCBA up to 15% of Portland cement was fixed and achieve the target strength of M25 grade of Portland cement concrete at 28 days.

Penetration Resistance Research of Fiber Reinforced RPC

2014 ◽  
Vol 1055 ◽  
pp. 23-26
Author(s):  
Can Xu
Keyword(s):  
Reinforced Concrete ◽  
Coarse Aggregate ◽  
Steel Fiber ◽  
Penetration Resistance ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Quartz Powder ◽  
Steel Fiber Reinforced Concrete

In the original to remove steel and steel fiber reinforced concrete coarse aggregate in quartz powder and a small amount of activator, can boost steel fiber content, and its application in construction makes it more convenient, but how the penetration resistance works is not particularly clear. Through the penetration resistance experiment, found that when joined the SF and BF, RPC can still keep complete even after three times by penetration ,indicating the good performance of penetration resistance.

Study on Retrofitting and Strengthening of Reinforced Concrete Beams Using Fibrous Concrete

2021 ◽  
Vol 9 (8) ◽  
pp. 1676-1684
Author(s):  
Natalia Sharma
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Reinforced Concrete Beams ◽  
Cement Matrix ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete

Abstract: Reinforced concrete structures are frequently in need of repair and strengthening as a result of numerous environmental causes, ageing, or material damage under intense stress conditions, as well as mistakes made during the construction process. RC structures are repaired using a variety of approaches nowadays. The usage of FRC is one of the retrofitting strategies. Steel fiber reinforced concrete (SFRC) was used in this investigation because it contains randomly dispersed short discrete steel fibers that operate as internal reinforcement to improve the cementitious composite's characteristics (concrete). The main rationale for integrating small discrete fibers into a cement matrix is to reduce the amount of cement used. The principal reason for incorporating short discrete fibers into a cement matrix is to reduce cracking in the elastic range, increase the tensile strength and deformation capacity and increase the toughness of the resultant composite. These properties of SFRC primarily depend upon length and volume of Steel fibers used in the concrete mixture. In India, the steel fiber reinforced concrete (SFRC) has seen limited applications in several structures due to the lack of awareness, design guidelines and construction specifications. Therefore, there is a need to develop information on the role of steel fibers in the concrete mixture. The experimental work reported in this study includes the mechanical properties of concrete at different volume fractions of steel fibers. These mechanical properties include compressive strength, split tensile strength and flexural strength and to study the effect of volume fraction and aspect ratio of steel fibers on these mechanical properties. However, main aim of the study was significance of reinforced concrete beams strengthened with fiber reinforced concrete layer and to investigate how these beams deflect under strain. The objective of the investigation was finding that applying FRC to strengthen beams enhanced structural performance in terms of ultimate load carrying capacity, fracture pattern deflection, and mode of failure or not.

Sign in / Sign up

Export Citation Format

Share Document