scholarly journals NEW SORBENTS ON LIGNIN BASE FOR WASTE WATER CLINGING FROM HEAVY METALS COMPOUNDS

2018 ◽  
Vol 1 (12) ◽  
pp. 63-65
Author(s):  
Denis Vlasenko ◽  
Nikita Morozov ◽  
Nikolay Korchevin

With using lignin, and vinylidene chloride a new sulfur-containing sorption material was obtained. A distinctive feature of the sorbent is the presence of carbon-carbon double bonds in its structure, which act as -donors for additional coordination of metal ions on the sorbent, thus facilitating their deposi-tion on the surface of the sorbent.

2014 ◽  
Vol 587-589 ◽  
pp. 692-695
Author(s):  
Wei Sun

Bio-absorption has an unparalleled advantage over other traditional methods in removing and recycling heavy metal ions from waste water. Consequently, it has a promising future. In this paper, the traditional methods and the bio-sorption method via which heavy metals are removed from waste water are compared to summarize the mechanism of bio-sorption, the types of bio-sorbent, the factors that can influence bio-sorption and the state of its application in waste water treatment .


Author(s):  
A. Berlina ◽  
A. Zherdev ◽  
B. Dzantiev

The usage of sulfur-containing chelate - protein conjugates in a non-competitive flow membrane analysis of heavy metal ions has been characterized. It was shown that these reagents in combination with oligonucleotide - gold nanoparticle conjugates provide the detection of 5 ng/ml and 100 ng/ml of mercury ions in water in the case of glutathione and mercaptosuccinic acid, respectively.


2011 ◽  
Vol 347-353 ◽  
pp. 1436-1441 ◽  
Author(s):  
Wen Bin Chen

In this study, the bacterium was identified as Sphingomonas sp. XJ2 by means of microscopic examination, physiological, biochemical detection, and modern molecular biology technology. After acclimatization for several times, this bacterium has good performance in removing heavy metals and organic matter from seawater. Alginate immobilized cells has obvious holes on the surface and has big specific surface area, which are conducive to the adsorption of metal ions. Hydration heat of Pb2+ is small, and is most likely to drop out of ligand water then become exposed Pb2+; in addition, the ionic radius of Pb2+ and is very similar to the ball K+ and is adsorbed by the ball easily. FTIR and XPS study indicated that Pb (II) was complexed by C-H and C-O bonds. The concentration of Pb(Ⅱ)of mine wastewater reach the first class of irrigation water quality standards after the first time of adsorption treatment, and reach the first class of fishery water quality standard after the second treatment. 1. Introduction Mine waste water mainly comes from mine production, the main pollutants including heavy metals, acid, organic pollutants, oil pollutants, cyanide, fluoride and soluble salts and so on. Heavy metal pollution and acid pollution are the most common water pollutions, the mainly heavy metals from wastewater are lead, zinc, nickel, copper, mercury, chromium, cadmium, cobalt, manganese, titanium, vanadium and bismuth. Hazards of mine waste water including environmental degradation and toxic to organisms; mine waste water contains heavy metal ions and other metal ions, through infiltration, percolation and runoff channels walk into the environment, then pollute water. After precipitation, absorption, complexation, chelation and redox, migrate and change in the water, and ultimately affect human health and aquatic growth. Heavy metals and metalloids and other pollutants in wastewater once enter the water environment, they can not be biodegradable, but by precipitation - dissolution, oxidation - reduction, coordinate effect, colloid formation effect, adsorption - desorption process and a series of physical and chemical migration transformation, which will eventually as one or more form stay in the environment for a long term, causing permanent potentially damage [1]. How to prevent non-ferrous metal mine waste water polluting water and farmland is one of the current problems which arising large public attention. Traditional treat methods of heavy metal waste water are chemical precipitation, ion exchange, evaporation and electrolysis, etc., these methods have disadvantages of high investment and operating costs, precipitation removal is not satisfactory, and could easily lead to secondary pollution and other defects. Since 1980s, people began to turn to research microbial treatment of heavy metal waste water, and found that microbial treatment of wastewater had advantages of low cost, effective and no secondary pollution. The economical and ecological feasibility of biosorption processes depend on the biosorbent metal uptake capacity to reach metal concentration legal limits for wastewater discharge and the ability of eluants to release sequestered metal in subsequent recovery [2-4]. Recovery allows metal recycling, leading to energy savings and materials conservation[5]. Finally, biosorbent regeneration used in multiple adsorption–desorption cycles [6], contributes to process cost effectiveness. Living cells have so broad assortment of mechanisms for surviving in environment that have elevated metal concentrations, including transport and intracellular and extracellular sequestration .The active process of metal accumulation by cells is usually referred to as bioaccumulation, while the passive metal sequestration by cell components is generally called biosorption. The physicochemical basis for metal sequestration at the cell surface may include complexation, coordination, chelation, ion exchange, adsorption, and inorganic microprecipitation processes. Bacteria make excellent biosorbents because of their high surface-to-volume ratios. Metal-binding behaviour has been evaluated on the basis of bacterial cell Gram reaction for viable cells and cell walls and envelopes. In this study, we conducted separation domesticated culture to Sphingomonas sp. XJ2 and used them to treat waste water preliminarily. Establishing an efficient, cheap, adaptable and easy to operate way of treating non-ferrous metal mine wastewater is a new development.


Author(s):  
О. В. Кислова

Сompare  the  various  modern  electrochemical  research  methods  effectiveness  used  to determine the heavy metals concentration in waste water, based on the literature data. Methodology.  Analysis  of  literature  data  on  the  possibilities,  advantages  and  disadvantages  of voltammetric, potentiometric, coulometric and conductometric methods for the heavy metals content studying in waste water.  Findings. The electrochemical methods are the most common methods for analyzing the composition of waste water. Among their advantages, it should be noted high selectivity, low concentration registration limit (up to 10-10 M for stripping voltammetric methods), simplicity in execution, absence of preliminary long-term samples preparation for analysis, the ability to microvolumes measure without samples destroying and automation  of  the  process  for  continuous  metals  concentrations  determination  in  waste  water  treatment, relatively inexpensive equipment, the ability to determine the concentration of several metal ions in a mixture. Originality. The studies have shown that most often the concentration of heavy metals in waste water determine with the using of the different modifications of voltammetric research methods (polarography and varieties of stripping voltammetry) and potentiometric research methods in particular with highly sensitive and specific ion-selective indicator electrodes. Practical value. The theoretical material on modern electrochemical methods for the heavy metal ions content determining in waste water is generalized.


2019 ◽  
pp. 257-262
Author(s):  
Göran Lindgren

The increasing amount of heavy metal ions in nature might not yet be a serious problem,However some of the heavy metals Le_ cadmium, mercury, arsenate (semi-metal) and highconcentrations of copper and zinc are clearly toxic to the human body,The present investigation deals with removal of heavy metal ions in aqueous solution, Differentcarriers designed for trace analysis as well as for high flow rates will be discussed,


2020 ◽  
Vol 10 (2) ◽  
pp. 22-28
Author(s):  
Olga N. PANFILOVA

The article presents the results of experiments on the removal of heavy metal ions from urban wastewater with a new sorbent -based on clay. The work was carried out in an experimental reactor (SBR) in three modes: bio-sorption treatment; sorption purifi cation; and evaluating the eff ect of the coagulant on the eff ectiveness of sorption purifi cation. The dose of sorbent used in the aeration tank to achieve standards for heavy metal ions was 10 g / l. When using the proposed sorbent in sorption purifi cation the dose of the sorbent was decreased to 1 g / l. The introduction of a coagulant with a dose of 6-8 mg / l for iron (III) had a positive eff ect on the concentration of zinc, copper, lead, aluminum and phosphates, but increased the concentration of iron in purifi ed water. The new sorbent is recommended for deep treatment of industrial wastewater with higher initial concentrations.


2021 ◽  
Author(s):  
shimaa fawzy Hamza ◽  
Maha mohammed El-Sawy ◽  
noha abdelfattah Alian ◽  
nihal omar shaker

Abstract Enviroment is worsening day by day due to industrial pollution, with hazardous chemicals contributing to the accumulation of heavy metal contaminants in waste water. Waste water polluted by these effluents disrupts the usual use of water for irrigation and marine life. The purity and efficiency of water is a paramount concern of mankind. These effluents must also be treated. Natural biopolymers are industrially desirable because of their ability to remove metal ions found in waste water. Among the many other low-cost absorbents listed, chitosan has the highest sorption potential for several metal ions (1) . In specific, we were trying to extract chitosan from shrimp, by N-deacetylation of chitin. The chemical structure of chitosan was characterised by the spectroscopy of Fourier Transform Infrared (FT-IR). The degree of N-deacetylation (DDA) was also calculated from FT-IR data. The use of biosorbent chitosan-fatty acid derivatives makes it possible to extract both heavy metals and organic compounds. In this analysis, the grafting copolymer of fatty chitosan derivatives with acrylic acid polymer was synthesised using ceric ammonium nitrate, the redox nitric acid method under UV irradiation. Synthesized copolymers have been subjected to various analytical techniques such as X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermogravimetric analysis (DTA) to confirm the formation of copolymers and to research their thermal stability. The findings show the formation and strong chemical interaction between fatty chitosan derivatives and acrylic acid. Fatty Chitosan derivatives and prepared grafting copolymers have been treated with copper and chromium-containing metal solutions and the results have shown that fatty chitosan derivatives and prepared copolymers are excellent in the removal of heavy metals such as copper and chromium. Prepared compounds could therefore open the way for industrial waste water treatment.


2017 ◽  
Vol 1 (2) ◽  
pp. 30-35
Author(s):  
Alexey Vasilenko ◽  
Lesya Vasilenko

It implemented a general description of the washing waste water in electroplating. The analysis of existing methods of cleaning the wash wastewater containing heavy metal ions. The comparative characteristic and disadvantages of these methods are given. The method proposed galvanocoagulation engineering calculation of industrial filter for wastewater treatment from heavy metal ions, in which the galvanocoagulation process.


2021 ◽  
Vol 7 (2(38)) ◽  
pp. 52-57
Author(s):  
Alekseeva Vladimirovna Polina ◽  
Tatyana A. Kurili ◽  
Alexey Zhuravlev

The results of study of statistical data on contamination of surface waters of the largest water bodies of the Krasnoyarsk Territory with ions of heavy metals of copper, zinc and nickel are presented. Dynamics of change of pollution of water objects by waste-water discharges in years 2012-2019 is given. The obtained results can be used in a training process to motivate the search for methods of intensifying treatment of waste water from heavy metal ions.


Sign in / Sign up

Export Citation Format

Share Document