scholarly journals STRATEGI PENGEMBANGAN KUALITAS PELAYANAN UNTUK MEMENUHI KEINGINAN KONSUMEN PADA BENGKEL WIJAYA TOYOTA

2019 ◽  
Vol 1 (1) ◽  
pp. 39-54
Author(s):  
Anggit Suryopratomo

This study addresses the complex problems in taking a decision to achieve corporate objectives, to improve the quality of consumer care services, as well as care services in accordance with the wishes of the customer in Workshop Wijaya Toyota (PT Wijaya Motor Lestari) in partnership with PT Astra International Tbk. This research is descriptive, assigning a sample of 100 customers. Data were processed in the qualitative  methods using Quality Function Deployment and the result was displayed in a matrix House of Quality. The results show that strategies the workshop Wijaya Toyota applies to improving the quality of services are: the waiting room and toilet cleanliness, promoting warranty repair workshop, ensuring the accuracy of completion time of maintenance, speed of completion of the work, maintenance appropriate to their complaints, garage attendant explanation of maintenance, stock availability of original spare parts, direct workshop personnel explanation at the time of submission, garage attendant explanation upon delivery, transparent overall cost to be paid,  reasonableness price of original parts, friendliness and courtesy officer spare parts, and workshop personnel direct contact. 

2014 ◽  
Vol 3 (1) ◽  
Author(s):  
Ahmad Yani

AhmadYaniPT. Visiland Dharma Sarana Jakarta PusatE-mail: [email protected] research objective was to implement QFD (Quality Function Deployment) to improve the qualityof service on Kanindo Shari’ah. Variables consisted of direct evidence, reliability, responsiveness,assurance, empathy. Phase of the QFD were (1) poll (Voice of Customer), (2) analysis with QFD, (3)the preparation of Quality Houses. Respondents were customers on Kanindo Shari’ah, namely 40customers who were collected by using accidental sampling. The results showed that the improvementin the quality of services performed by observing attributes of interest to the customer. Then, thecustomer satisfaction performance attributes were the most satisfying hospitality and good communication.Competitive satisfaction performance attributes satisfied customer was adequate infrastructure.Goal was the most preferred attribute settle by Kanindo Shari’ah. The highest value on ImprovementRatio was the speed, precision and accuracy of serving customers. Sales point showed a stronglevel of sales. Finally, the analysis of the results obtained planning quality improvement services inthe form of House Of Quality (HOQ)Keywords: Quality function deployment, direct evidence, reliability, responsiveness, assurance, empathy,house of quality


2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Kabul Trifiyanto ◽  
Ika Susilowati

Kebumen tourism is dominated by south coast destination objects with combat routes ranging from half to two hours drive from the city center. Since 2015 tourist visits  have increased, but on average only 14%. This is not comparable with the budget issued by the government to date which focuses on tourism infrastructure and the opening of new objects, especially coastal areas. According to preliminary studies the cause is because of visitor dissatisfaction with the quality of services provided, especially coastal tourism. So as to provide recommendations for improvements in tourism services in this study, the quality function deployment (QFD) method is based on servqual evaluation specifically for tourism dimensions. There are 43 variables used to define the quality of service dimensions of tourism for visitors. By using additional kano models, 12 critical variables were obtained. Then the critical variable produces 16 technical responses through the house of quality method for later as a recommendation for improvement. With the priority of repairs are; making tourist management SOPs, adding cleaners, and adding a viewing post/spot


2019 ◽  
Vol 11 (2) ◽  
pp. 61-68
Author(s):  
AKM Mashiul Munir ◽  
AKM Yunus Halim

Introduction: In many developing countries, accreditation programs, which have been implemented as a regulatory tool to ensure quality of service and efficient use of resources. To improve the quality of services, health organizations use patient satisfaction survey to evaluate their processes delivered. The care in the Out Patient Department (OPD) indicates the quality of services of any hospital. Combined Military Hospital (CMH) Bogra, is the largest tertiary level military hospital in North Bengal. Objective: To assess the satisfaction levels of patients‘ in CMH Bogra related to health care services. Materials and Methods: A cross sectional study was carried out among 367 patients attending outpatient department of CMH Bogra. The patients were selected randomly from out patient department. The study was conducted from 01 May 2015 to 31 October 2015. All patients were interviewed using pre-structured questionnaire, which included various variables related to patient satisfaction. Results: A total number of 367 respondents were interviewed. Majority (48.2%) of the respondents were from the age category of 26-35 years. Maximum attending population consisted of Army personnel. Overall satisfaction level of patients on hospital services was good. Requirement of separate waiting room for the JCO’s and training of the hospital staffs on behaviour with the patients were found important. Conclusion: Patient satisfaction surveys have evolved as a powerful management and marketing tool. It is being widely used by various hospitals to capture the “Voice of the Consumer”. Among the respondents, 95% of expressed overall satisfaction. This bears a testimony to the efforts of the hospital management towards improvement of services. Journal of Armed Forces Medical College Bangladesh Vol.11(2) 2015: 61-68


2019 ◽  
Vol 4 (2) ◽  
pp. 68
Author(s):  
Ratna Ekasari ◽  
Nurul Aziza ◽  
M Adhi Prasnowo ◽  
Khoirul Hidayat

<div class="page" title="Page 1"><div class="layoutArea"><div class="column"><p><span>AdiTeknik </span><span>is one of the garages in Sidoarjo, East Java, Indonesia, engaged in repairing services industry tools. This garage recently has problems in attracting customers. Prior studies suggest that one of the things that affect the number of customers is customer satisfaction. After listening to complaints from several consumers, consumers said that they are less satisfied with the quality of the garage. This phenomenon become the trigger for us to investigate the customer satisfaction especially on the </span><span>AdiTeknik </span><span>garage. One method that can be used to help companies to improve the quality according to customer point of view is Quality Function Deployment (QFD). We find that there are twelve attributes of the desires and needs of consumers to improve the quality of garage service of </span><span>AdiTeknik. </span><span>Those are the quality of repair, cleanliness and neatness of the garage, complete facilities for customer, employee performance, repair results in accordance with demand, timeliness of completion, the ability to analyze problems, clarity fees and the completion time, warranty repair results, employee friendliness, ease of contacting a workshop, and a willingness to give feedback. </span></p></div></div></div>


Author(s):  
Nur Hakim Arifianto ◽  
Sauptika Kancana ◽  
Adi Soeprapto

The purpose of the research is (1) analyzing the level of conformity betweenexpectations (importance) customer and performance (performance) of the company against the quality of services provided by Yamaha Motorcycle repair shop (2) Determine the priority Quality improvement based on the level of conformity and index of Potential Gain Customer Value (PGCV) to improve the quality of services provided by Yamaha Motorcycle repair shop. The population in this research is a customer Yamaha Motorcycle repair shop Demangan Yogyakarta for approximately arround 2 months April 2019 till June 2019.Determination of the number of samples will be determined by the level of Confidance 95% and margin of error is 10% then obtained the number of samples as many as 98 people. The sampling techniques used in this study were based on Non Probabiliy Sampling methods using the Accidental Sampling approach.The results showed that (1) the level of conformity between expectations (importance) of the customer and performance (performance) of the company against the quality of services provided by the Yamaha Motorcycle repair shop Demangan Yogyakarta has an average level of conformity Below 100% of which is 88.30%. 88.30% means the company lacks or does not fulfill what is considered important by the customer and the service has not beensatisfactory; (2) Priority of improvement of service quality (top priority in the Quadrant A IPA diagram with index PGCV) namely: 1) Workshop Yamaha new source Motor Demangan has a complete spare parts, 2) equipment used Yamaha Workshop new source Demangan complete, 3) Employees Yamaha Motorcycle repairshop Demangan tell the customers when the service is certainly motorbike will be delivered, 4) Employees Yamaha Motorcycle repair shop Demangan always ready in responding to customer demand, 5) Mechanics workshop Yamaha Motorcycle repair shop Demangan fast In servicing motorcycles, 6) Employees Yamaha Motorcycle repair shop Demangan always able to answer questions related to Yamaha motorcycles, 7) Employees Yamaha Motorcycle repair shop Demangan always prioritize the expectations of customers.


2012 ◽  
Vol 1 (1) ◽  
pp. 65-75
Author(s):  
Rudy Joegijantoro

Quality Function Deployment (QFD) is defined as a method that supports the structured design of products or services. The method is based on the customer needs and involves all the relevant parties within an organization that develops and produces a product through teamwork. It is a method for mapping and prioritizing customer requirements into functional features and technical modules to optimize market performance. Although the quality of a service can be dramatically improved through a QFD exercise, the traditional crisp scoring approach has a major drawback. A wrong conclusion can be easily produced since the fuzzy nature of linguistic correlation terms from evaluation members is ignored. To overcome this problem, fuzzy scoring for linguistic terms is proposed in this paper. This study integrates fuzzy logic into House Of Quality to establish a framework for prioritizing customer requirements to simply, objectively, and scientifically analyze service features.


There are a huge number of nodes connected to web computing to offer various types of web services to provide cloud clients. Limited numbers of nodes connected to cloud computing have to execute more than a thousand or a million tasks at the same time. So it is not so simple to execute all tasks at the same particular time. Some nodes execute all tasks, so there is a need to balance all the tasks or loads at a time. Load balance minimizes the completion time and executes all the tasks in a particular way.There is no possibility to keep an equal number of servers in cloud computing to execute an equal number of tasks. Tasks that are to be performed in cloud computing would be more than the connected servers. Limited servers have to perform a great number of tasks.We propose a task scheduling algorithm where few nodes perform the jobs, where jobs are more than the nodes and balance all loads to the available nodes to make the best use of the quality of services with load balancing.


2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Yuhelmi Yuhelmi ◽  
Nining Sudiar ◽  
Rismayeti Rismayeti

This study aims to analyze How Public Service Board of Library and RegionalArchives Riau Province, hereinafter referred to as (BPAD) Riau Province. This isdone to look at the quality and how much success BPAD Riau Province in performingits main function for the people who need the information in the Library, PublicServices how and what has or has not been done by the libraries in improving servicequality perceptions positively or negatively to quality of public services provided bythe Library Visitors Riau BPAD can be used as input for later followed up todetermine new strategies for improving the quality of services that aim to improve ordefend it.Methods used are qualitative methods and data collected by focuss groupdiscussion (FGD) and inferred based on five aspects of service quality therespondents were library patrons who use library services in BPAD as many as 14people consisting of 2 librarians, lecturers 3, 4 general (civil servants and private), 3students of, and 2 students, by using the technique of purposive sampling. Based FGDresults showed that for BPAD reliability aspects are at a good level, for aspects ofresponsiveness and confidence is at a level sufficient to aspects while empathy is at alevel less so for this aspect needs to be improved towards a better, while for theintangible aspects of BPAD services are at a satisfactory level and this needs to bemaintained in order to remain on the future state of the user satisfactory.


Author(s):  
Joanna Ejdys

One of the forms of care for the elderly are the nursing homes, long-term care homes. Still, in many countries the low level of quality of such services is still the main criterion for the perception of objects as a final option, in the absence of alternative forms of care for an older person. The aim of the article is to seek answers to the questions about the expected quality of the services offered by nursing homes. The article presents the results of research on the expectations of the society in terms of quality of services, carried out on a sample of 602 Polish citizens. The study allowed to identify the key characteristics that determine the quality of services from the perspective of the future decisions related to the choice of the resort.


2011 ◽  
Vol 2011 ◽  
pp. 1-4 ◽  
Author(s):  
Paa Kobina Turkson

The study used logistic regression modelling to determine predictors of satisfaction with delivery of animal health care services for 889 clients (livestock and poultry keepers) in periurban Ghana. Of the 15 indicators tested as predictors of satisfaction in this study, 8 were included in the best fit model. These were accessibility, availability of services, service charge, effectiveness, efficiency, quality of services, meeting client needs, and getting help. Efficiency and effectiveness were perceived by the respondents to be synonymous, as were service quality and effectiveness, as suggested by when cross tabulated. Therefore, one or the other could be used in future studies but not both to avoid collinearity. The identified predictors could be targeted for improvement in quality of service delivery to livestock and poultry keepers in Ghana.


Sign in / Sign up

Export Citation Format

Share Document