PurposeThe purpose of this paper is to present the design and development of transfer seat system which aids the disabled drivers to get in and out of the car without outside help thereby reducing physical effort. The design of the model is carried out taking into account the vehicle specification and the weight of the person. After careful measurement and analysis, the required seat system parameters were estimated. The three movements associated with the system are satisfied with motors controlled by switches. The design calculations and the tests carried out are validated using the ANSYS finite element software.Design/methodology/approachThe whole process begins with the definition of the problem of eliminating the support of an additional person to help people with disabilities enter and leave a car, making it feasible and economical for the patients. Literature review includes and develops information from different sources. The research gap is identified and a necessary improvement is proposed. Design and analysis involves optimum design and calculation that achieves the efficiency, reliability and comfortable movement of the system. It also involves validation to support stress analysis in the system that is performed using ANSYS. The material supply includes the required materials taking into account factors such as strength, durability and availability. Manufacturing selects appropriate manufacturing techniques taking into account design, materials and space limitation. Operations such as welding, cutting, drilling and grinding are considered. The tests consist of performing a physical test to check the approximate load capacity of the system for a gentle, comfortable and secure comfort. Validation ensures that the results of the test coincide with the existing results of the supporting documentation. This process also involves taking corrective action and re-doing the design process to achieve the desired results.FindingsThe results that are plotted suggest that with the increase in downward force, the power required to balance it is greater. Similarly, the speed increases with increasing power. ANSYS analysis can be performed for the support structure and for obtaining deformation. The entire work can be implemented on the actual vehicle, and the time required for the patient to enter and exit could be calculated. The entire transfer system that operates by the engine can be modified, and a hydraulic system can be used to make the movements possible. The section of the rail can also be modified accordingly, and the comparison of the possible results can be carried out with the present system.Research limitations/implicationsThe entire system can be improvised by working on the mechanism which reduces the overall operating time without causing discomfort to the user when entering and exiting the car. Furthermore, the safety feature must be considered in the car to prevent the mechanism from altering the seating position of the seat, for which a mooring system can be inserted with a switch to hold it in place and release it. A powerful motor can be integrated into the mechanism to improvise the second movement, which is the deployment of the legs on the ground with the motorized wheels. The set of cast iron rails is used to support more weight without failure.Practical implicationsThe main objective is to design a system that allows a disabled person to enter and exit easily without the support or assistance of a second person. The design process had to be modified, and various methods were tried to incorporate this flawless movement onto the chassis of the car. Necessary changes have been made in the case of the material used and of the yarn to obtain the desired movement at the desired speed at the desired time. By performing these three movements, the secondary objective had to be integrated into the system to automate the door to facilitate the entry and exit of the car and to open the door simply by pressing a button. These results were taken into account to make the engine speed changes and the speed at which the chair will descend and move horizontally to ensure a safe design.Social implicationsThe developed transfer seat system can be widely used in healthcare sectors which greatly helps the movement of disabled persons.Originality/valueThe design calculations and tests carried out are validated using the ANSYS®, a finite element software.
PERFORMANCE OF AXIALLY LOADED TAPERED CONCRETE-FILLED STEEL COMPOSITE SLENDER COLUMNS
