scholarly journals A short geostatistical study of the three-dimensional spatial structure of fumonisins in stored maize

2010 ◽  
Vol 3 (1) ◽  
pp. 95-103 ◽  
Author(s):  
M. Rivas Casado ◽  
D. Parsons ◽  
N. Magan ◽  
R. Weightman ◽  
P. Battilani ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Spatial Structure ◽  
Spatial Correlation ◽  
Three Dimensional ◽  
Sample Collection ◽  
Data Set ◽  
Research Areas ◽  
Geostatistical Approach ◽  
Sampling Protocols ◽  
Current Sample

The heterogeneous three-dimensional spatial distribution of mycotoxins has proven to be one of the main limitations for the design of effective sampling protocols. Current sample collection protocols for mycotoxins have been designed to estimate the mean concentration and fail to characterise the spatial distribution of the mycotoxin concentration due to the aggregation of the incremental samples. Geostatistical techniques have been successfully applied to overcome similar problems in many research areas. However, little work has been developed on the use of geostatistics for the design of sampling protocols for mycotoxins. This paper focuses on the analysis of the two and three-dimensional spatial structure of fumonisins B1 (FB1) and B2 (FB2) in maize in a bulk store using a geostatistical approach and on how results help determine the number and location of incremental samples to be collected. The spatial correlation between FB1 and FB2, as well as between the number of kernels infected and the level of contamination was investigated. For this purpose, a bed of maize was sampled at different depths to generate a unique three-dimensional data set of FB1 and FB2. The analysis found no clear evidence of spatial structure in either the two-dimensional or three-dimensional analyses. The number of Fusarium infected kernels was not a good indicator for the prediction of fumonisin concentration and there was no spatial correlation between the concentrations of the two fumonisins.

scholarly journals Geostatistical FDEM inversion: a three-dimensional real case application

2021 ◽  
Author(s):  
Leonardo Azevedo ◽  
João Narciso ◽  
Ellen Van De Vijver
Keyword(s):  
Spatial Distribution ◽  
Physical Properties ◽  
Three Dimensional ◽  
Real Case ◽  
Small Scale ◽  
Inversion Method ◽  
Two Dimensional ◽  
Data Set ◽  
Near Surface ◽  
Direct Observations

<p>The near surface is a complex and often highly heterogeneous system as its current status results from interacting processes of both natural and anthropogenic origin. Effective sustainable management and land use planning, especially in urban environments, demands high-resolution subsurface property models enabling to capture small-scale processes of interest. The modelling methods based only on discrete direct observations from conventional invasive sampling techniques have limitations with respect to capturing the spatial variability of these systems. Near-surface geophysical surveys are emerging as powerful techniques to provide indirect measurements of subsurface properties. Their integration with direct observations has the potential for better predicting the spatial distribution of the subsurface physical properties of interest and capture the heterogeneities of the near-surface systems.</p><p>Within the most common geophysical techniques, frequency-domain electromagnetic (FDEM) induction methods have demonstrated their potential and efficiency to characterize heterogeneous deposits due to their simultaneous sensitivity to electrical conductivity (EC) and magnetic susceptibility (MS). The inverse modelling of FDEM data based on geostatistical techniques allows to go beyond conventional analyses of FDEM data. This geostatistical FDEM inversion method uses stochastic sequential simulation and co-simulation to perturbate the model parameter space and the corresponding FDEM forward model solutions, including both the synthetic FDEM responses and their sensitivity to changes on the physical properties of interest. A stochastic optimization driven by the misfit between true and synthetic FDEM data is applied to iterative towards a final subsurface model. This method not only improve the confidence of the obtained EC and MS inverted models but also allows to quantify the uncertainty related to them. Furthermore, taking into account spatial correlations enables more accurate prediction of the spatial distribution of subsurface properties and a more realistic reconstruction of small-scale spatial variations, even when considering highly heterogeneous near surface systems. Moreover, a main advantage of this iterative geostatistical FDEM inversion method is its ability to flexibly integrate data with different resolution in the same framework.</p><p>In this work, we apply this iterative geostatistical FDEM inversion technique, which has already been successfully demonstrated for one- and two-dimensional applications, to invert a real case FDEM data set in three dimensions. The FDEM survey data set was collected on a site located near Knowlton (Dorset, UK), which is geologically characterized by Cretaceous chalk overlain by Quaternary siliciclastic sand deposits. The subsurface at the site is known to contain several archaeological features, which produces strong local in-phase anomalies in the FDEM survey data. We discuss the particular challenges involved in the three-dimensional application of the inversion method to a real case data set and compare our results against previously obtained ones for one- and two-dimensional approximations.</p>

scholarly journals Analysis of polycrystalline microstructure of AlMgSc alloy observed by 3D EBSD

2020 ◽  
Author(s):  
Jaromír Kopeček ◽  
Jakub Staněk ◽  
Stanislav Habr ◽  
Filip Seitl ◽  
Lukas Petrich ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Grain Boundaries ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Morphological Characteristics ◽  
Polycrystalline Materials ◽  
Electron Backscattered Diffraction ◽  
Data Set ◽  
3D Data

The aim of this paper is to evaluate an ambitious imaging experiment and to contribute to the methodology of statistical inference of the three-dimensional microstructure of polycrystalline materials. The microstructure of the considered Al-3Mg-0.2Sc alloy was investigated by three-dimensional electron backscattered diffraction (3D-EBSD), i.e., tomographic imaging with xenon plasma focused ion beam (Xe-FIB) alongside EBSD. The samples were subjected to severe plastic deformations by equal channel angular dressing (ECAP) and annealed subsequently prior to the mapping. First we compared the misorientation level needed for  a reliable segmentation of grains distinguishing between conventional evaluation of two-dimensional cuts and the 3D data set. Then, using methods of descriptive spatial statistics, various morphological characteristics of a large number of grains were analyzed, as well as the crystallographic texture and the spatial distribution of grain boundaries. According to the results stated so far in the literature, an even microstructure was expected, nevertheless local inhomogeneities in grains and grain boundaries with regard to their size, texture and spatial distribution were observed and justified.

Three-dimensional image analysis and visualization in confocal light microscopy

1993 ◽  
Vol 51 ◽  
pp. 158-159
Author(s):  
J. K. Samarabandu ◽  
R. Acharya ◽  
D. R. Pareddy ◽  
P. C. Cheng
Keyword(s):  
Depth Perception ◽  
Computer Graphic ◽  
Three Dimensional ◽  
Cellular Organization ◽  
Data Set ◽  
Computational Burden ◽  
Interactive Operation ◽  
Cell Organization ◽  
Confocal Images ◽  
3D Digitization

In the study of cell organization in a maize meristem, direct viewing of confocal optical sections in 3D (by means of 3D projection of the volumetric data set, Figure 1) becomes very difficult and confusing because of the large number of nucleus involved. Numerical description of the cellular organization (e.g. position, size and orientation of each structure) and computer graphic presentation are some of the solutions to effectively study the structure of such a complex system. An attempt at data-reduction by means of manually contouring cell nucleus in 3D was reported (Summers et al., 1990). Apart from being labour intensive, this 3D digitization technique suffers from the inaccuracies of manual 3D tracing related to the depth perception of the operator. However, it does demonstrate that reducing stack of confocal images to a 3D graphic representation helps to visualize and analyze complex tissues (Figure 2). This procedure also significantly reduce computational burden in an interactive operation.

EMCAT: An automatic image-processing system for electron-microscopic tomography

1994 ◽  
Vol 52 ◽  
pp. 418-419
Author(s):  
Weiping Liu ◽  
John W. Sedat ◽  
David A. Agard
Keyword(s):  
Image Processing ◽  
Structural Information ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Processing System ◽  
Electron Microscopic ◽  
Data Set ◽  
Ordered Structures ◽  
Automatic Image Processing ◽  
Em Tomography

Any real world object is three-dimensional. The principle of tomography, which reconstructs the 3-D structure of an object from its 2-D projections of different view angles has found application in many disciplines. Electron Microscopic (EM) tomography on non-ordered structures (e.g., subcellular structures in biology and non-crystalline structures in material science) has been exercised sporadically in the last twenty years or so. As vital as is the 3-D structural information and with no existing alternative 3-D imaging technique to compete in its high resolution range, the technique to date remains the kingdom of a brave few. Its tedious tasks have been preventing it from being a routine tool. One keyword in promoting its popularity is automation: The data collection has been automated in our lab, which can routinely yield a data set of over 100 projections in the matter of a few hours. Now the image processing part is also automated. Such automations finish the job easier, faster and better.

Urban energetics applications and Geomatic technologies in a Smart City perspective

2015 ◽  
Vol 6 (1) ◽  
pp. 19-29 ◽  
Author(s):  
G. Bitelli ◽  
P. Conte ◽  
T. Csoknyai ◽  
E. Mandanici
Keyword(s):  
Smart City ◽  
Laser Scanning ◽  
Near Infrared ◽  
Three Dimensional ◽  
Energy Sector ◽  
Primary Objective ◽  
Airborne Lidar ◽  
City Management ◽  
Urban Context ◽  
Research Areas

The management of an urban context in a Smart City perspective requires the development of innovative projects, with new applications in multidisciplinary research areas. They can be related to many aspects of city life and urban management: fuel consumption monitoring, energy efficiency issues, environment, social organization, traffic, urban transformations, etc. Geomatics, the modern discipline of gathering, storing, processing, and delivering digital spatially referenced information, can play a fundamental role in many of these areas, providing new efficient and productive methods for a precise mapping of different phenomena by traditional cartographic representation or by new methods of data visualization and manipulation (e.g. three-dimensional modelling, data fusion, etc.). The technologies involved are based on airborne or satellite remote sensing (in visible, near infrared, thermal bands), laser scanning, digital photogrammetry, satellite positioning and, first of all, appropriate sensor integration (online or offline). The aim of this work is to present and analyse some new opportunities offered by Geomatics technologies for a Smart City management, with a specific interest towards the energy sector related to buildings. Reducing consumption and CO2 emissions is a primary objective to be pursued for a sustainable development and, in this direction, an accurate knowledge of energy consumptions and waste for heating of single houses, blocks or districts is needed. A synoptic information regarding a city or a portion of a city can be acquired through sensors on board of airplanes or satellite platforms, operating in the thermal band. A problem to be investigated at the scale A problem to be investigated at the scale of the whole urban context is the Urban Heat Island (UHI), a phenomenon known and studied in the last decades. UHI is related not only to sensible heat released by anthropic activities, but also to land use variations and evapotranspiration reduction. The availability of thermal satellite sensors is fundamental to carry out multi-temporal studies in order to evaluate the dynamic behaviour of the UHI for a city. Working with a greater detail, districts or single buildings can be analysed by specifically designed airborne surveys. The activity has been recently carried out in the EnergyCity project, developed in the framework of the Central Europe programme established by UE. As demonstrated by the project, such data can be successfully integrated in a GIS storing all relevant data about buildings and energy supply, in order to create a powerful geospatial database for a Decision Support System assisting to reduce energy losses and CO2 emissions. Today, aerial thermal mapping could be furthermore integrated by terrestrial 3D surveys realized with Mobile Mapping Systems through multisensor platforms comprising thermal camera/s, laser scanning, GPS, inertial systems, etc. In this way the product can be a true 3D thermal model with good geometric properties, enlarging the possibilities in respect to conventional qualitative 2D images with simple colour palettes. Finally, some applications in the energy sector could benefit from the availability of a true 3D City Model, where the buildings are carefully described through three-dimensional elements. The processing of airborne LiDAR datasets for automated and semi-automated extraction of 3D buildings can provide such new generation of 3D city models.

scholarly journals Do galactic bars depend on environment?: an information theoretic analysis of Galaxy Zoo 2

2020 ◽  
Vol 501 (1) ◽  
pp. 994-1001
Author(s):  
Suman Sarkar ◽  
Biswajit Pandey ◽  
Snehasish Bhattacharjee
Keyword(s):  
Spatial Distribution ◽  
Mutual Information ◽  
Local Density ◽  
Statistical Significance ◽  
Distribution Functions ◽  
Cumulative Distribution ◽  
Host Galaxy ◽  
Data Sets ◽  
Data Set ◽  
Information Theoretic

ABSTRACT We use an information theoretic framework to analyse data from the Galaxy Zoo 2 project and study if there are any statistically significant correlations between the presence of bars in spiral galaxies and their environment. We measure the mutual information between the barredness of galaxies and their environments in a volume limited sample (Mr ≤ −21) and compare it with the same in data sets where (i) the bar/unbar classifications are randomized and (ii) the spatial distribution of galaxies are shuffled on different length scales. We assess the statistical significance of the differences in the mutual information using a t-test and find that both randomization of morphological classifications and shuffling of spatial distribution do not alter the mutual information in a statistically significant way. The non-zero mutual information between the barredness and environment arises due to the finite and discrete nature of the data set that can be entirely explained by mock Poisson distributions. We also separately compare the cumulative distribution functions of the barred and unbarred galaxies as a function of their local density. Using a Kolmogorov–Smirnov test, we find that the null hypothesis cannot be rejected even at $75{{\ \rm per\ cent}}$ confidence level. Our analysis indicates that environments do not play a significant role in the formation of a bar, which is largely determined by the internal processes of the host galaxy.

scholarly journals Spatio-Temporal Coupling Characteristics and the Driving Mechanism of Population-Land-Industry Urbanization in the Yangtze River Economic Belt

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 400
Author(s):  
Liejia Huang ◽  
Peng Yang ◽  
Boqing Zhang ◽  
Weiyan Hu
Keyword(s):  
Economic Development ◽  
Spatial Correlation ◽  
Yangtze River ◽  
Three Dimensional ◽  
Driving Mechanism ◽  
The Yangtze River ◽  
Central Cities ◽  
Urban Agglomerations ◽  
Development Level ◽  
Coordination Degree

The purpose of this paper is to probe into the coupled coordination of urbanization in population, land, and industry to improve urbanization quality. A coupled coordination degree model, spatial analysis method and spatial metering model are employed. The study area is 110 prefecture-level cities in the Yangtze River Economic Belt. The study shows that: (1) the coupling degree of the population-land-industry urbanization grew very slowly between 2006 and 2016. On the whole, the three-dimensional urbanization is in a running-in period, and land-based urbanization dominates, while population-based urbanization and industry-based urbanization are relatively lagging behind. (2) The three major urban agglomerations, the Chengdu-Chongqing, the middle reaches of the Yangtze River and the Yangtze River Delta, are parallel to the whole area in terms of the coupling degree of the three dimensional urbanization with a well-ordered structure, especially in the central cities of the three major urban agglomerations. (3) There is significant spatial correlation in the coupling degree and coordination degree of the three-dimensional urbanization. The high value of coupling degree and coordination degree are clustered continuously in developed cities, provincial capitals, and central cities of the downstream reaches of the Yangtze River. (4) The coordinated degree has significant positive spatial autocorrelation, showing obvious spatial agglomeration characteristics: H-H agglomeration areas are concentrated in the downstream developed areas such as Jiangsu, Zhejiang, and Shanghai. L-L agglomeration areas are mainly concentrated in upstream undeveloped areas, but the number of their cities shows a decreasing trend. (5) The coordination degree of the three-dimensional urbanization is the result of the comprehensive effect of economic development level, the government’s decision-making behavior, and urban location. Among them, the economic development level, urbanization investment, traffic condition, and urban geographical location play a decisive role. This paper contributes to the existing literatures by exploring urbanization quality, spatial correlation and influencing factors from the perspectives of the three-dimensional urbanization in the Yangtze River Economic Belt. The conclusion might be helpful to promote the coupling and coordinated development of urbanization in population-land-industry, and ultimately to improve urbanization quality in the Yangtze River Economic Belt.

Harmonic Analysis on Low Quality Tidal Data

2014 ◽  
Author(s):  
Joost den Haan
Keyword(s):  
Harmonic Analysis ◽  
Three Dimensional ◽  
Measurement Data ◽  
Tidal Energy ◽  
Energy Yield ◽  
Profile Measurement ◽  
Current Profile ◽  
Tidal Power ◽  
Data Set ◽  
Tidal Forcing

The aim of the study is to devise a method to conservatively predict a tidal power generation based on relatively short current profile measurement data sets. Harmonic analysis on a low quality tidal current profile measurement data set only allowed for the reliable estimation of a limited number of constituents leading to a poor prediction of tidal energy yield. Two novel, but very different approaches were taken: firstly a quasi response function is formulated which combines the currents profiles into a single current. Secondly, a three dimensional vectorial tidal forcing model was developed aiming to support the harmonic analysis with upfront knowledge of the actual constituents. The response based approach allowed for a reasonable prediction. The vectorial tidal forcing model proved to be a viable start for a full featuring numerical model; even in its initial simplified form it could provide more insight than the conventional tidal potential models.

A Constrained Delaunay Triangulation Algorithm Based on Incremental Points

2011 ◽  
Vol 90-93 ◽  
pp. 3277-3282 ◽  
Author(s):  
Bai Chao Wu ◽  
Ai Ping Tang ◽  
Lian Fa Wang
Keyword(s):  
Information System ◽  
Data Structures ◽  
Delaunay Triangulation ◽  
Spanning Tree ◽  
Minimum Spanning Tree ◽  
Three Dimensional ◽  
Geographical Information ◽  
Two Dimensional ◽  
Data Set ◽  
Constrained Delaunay Triangulation

The foundation ofdelaunay triangulationandconstrained delaunay triangulationis the basis of three dimensional geographical information system which is one of hot issues of the contemporary era; moreover it is widely applied in finite element methods, terrain modeling and object reconstruction, euclidean minimum spanning tree and other applications. An algorithm for generatingconstrained delaunay triangulationin two dimensional planes is presented. The algorithm permits constrained edges and polygons (possibly with holes) to be specified in the triangulations, and describes some data structures related to constrained edges and polygons. In order to maintain the delaunay criterion largely，some new incremental points are added onto the constrained ones. After the data set is preprocessed, the foundation ofconstrained delaunay triangulationis showed as follows: firstly, the constrained edges and polygons generate initial triangulations，then the remained points completes the triangulation . Some pseudo-codes involved in the algorithm are provided. Finally, some conclusions and further studies are given.

Sign in / Sign up

Export Citation Format

Share Document