scholarly journals Research on Design of Management System for Power Source Equalizing Charge based on FPGA control

2016 ◽  
Vol 12 (02) ◽  
pp. 20
Author(s):  
Haifeng Lin ◽  
Ruili Mao
Keyword(s):  
High Power ◽  
High Capacity ◽  
Power Source ◽  
Super Capacitor ◽  
Power Requirement ◽  
Design Scheme ◽  
Charging Mode ◽  
New Type ◽  
Mixed Power ◽  
Peak Value

The accumulator can store the energy in high capacity, and the super capacitor can charge and discharge in high power. The mixed power source composed by the accumulator and super capacitor not only has the characteristics for both of them but also meets the high-power requirement of high capacity and peak value. How to perform the equalizing charging for multiple power packs is a emphasis in the industry currently. On the basis of analysis for multiple equalizing charging methods, a new type of design scheme based on DC/DC and switch matrix is raised in this project, the thinking of intermittent charging mode is adopted and four BCAP0350 is served as the charging sample to perform the charging and discharging experiment as well as verify the composite charging design scheme is provided with the feasibility.

scholarly journals Electromagnetic Field Analysis and Design of a Hermetic Interior Permanent Magnet Synchronous Motor with Helical-Grooved Self-Cooling Case for Unmanned Aerial Vehicles

2021 ◽  
Vol 11 (11) ◽  
pp. 4856
Author(s):  
Hae-Sol Lee ◽  
Myeong-Hwan Hwang ◽  
Hyun-Rok Cha
Keyword(s):  
Electromagnetic Field ◽  
Unmanned Aerial Vehicles ◽  
Permanent Magnet ◽  
High Power ◽  
Heat Dissipation ◽  
Power Source ◽  
Flight Duration ◽  
Aerial Vehicles ◽  
Drive Motor ◽  
Interior Permanent Magnet

As unmanned aerial vehicles expand their utilization and coverage, research is in progress to develop low-weight and high-performance motors to efficiently carry out various missions. An electromagnetic field interior permanent magnet (IPM) motor was designed and analyzed in this study that improved the flight performance and flight duration of an unmanned aerial vehicle (UAV). The output power and efficiency of a conventional commercial UAV motor were improved by designing an IPM motor of the same size, providing high power output and high-speed operation by securing high power density, wide speed range, and mechanical stiffness. The cooling performance and efficiency of the drive motor were improved without requiring a separate power source for cooling by introducing the helical-grooved self-cooling case, which has a low heat generation structure. Furthermore, the motor is oil-cooled through rotating power without a separate power source, reducing the weight of the UAV. The heat dissipation characteristics were verified by fabricating a prototype and taking actual measurements to verify the validity of the heat dissipation characteristics. The results of this study are expected to improve the flight duration and performance of UAVs and contribute to the efficiency of the design of a UAV drive motor.

Design of a cascade high-power source with high efficiency

2018 ◽  
Author(s):  
Gangxiong Wu ◽  
Yanyu Wei ◽  
Qian Li ◽  
Xia Lei ◽  
Chong Ding ◽  
...  
Keyword(s):  
High Power ◽  
High Efficiency ◽  
Power Source

Electron-beam valves (EBVs): a new type of high-power device

2000 ◽  
Author(s):  
Vladimir I. Perevodchikov ◽  
V. N. Shapenko ◽  
V. F. Martynov ◽  
P. M. Stalkov ◽  
A. L. Shapiro
Keyword(s):  
Electron Beam ◽  
High Power ◽  
Power Device ◽  
New Type

A Study on Process of Modular Li-Ion Power Batteries

2013 ◽  
Vol 273 ◽  
pp. 153-156
Author(s):  
Han Liang ◽  
Xiao Feng ◽  
Yuan An Li
Keyword(s):  
High Power ◽  
Internal Resistance ◽  
Power Battery ◽  
New Process ◽  
Good Consistency ◽  
New Type ◽  
Li Ion ◽  
Production Automation ◽  
The Way

Li-ion power battery which has a broad prospect of application in many industry fields is a new type of high power battery. The formation-testing and sorting-packing are necessary processes in battery manufacture. Currently the process of formation almost takes the way of monomer battery, then sorting and packing by measuring the parameters of its internal resistance, voltage and capacity. The operation is complicated and the amount of data is huge. On account of the problem, we propose a new process of battery modularization. It can greatly reduce the workload of the parameter testing when using the optimized process. And batteries can get a good consistency, which is favor of sorting-packing and production automation.

scholarly journals Realizing high-power and high-capacity zinc/sodium metal anodes through interfacial chemistry regulation

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhen Hou ◽  
Yao Gao ◽  
Hong Tan ◽  
Biao Zhang
Keyword(s):  
High Power ◽  
High Capacity ◽  
Interfacial Chemistry ◽  
Zinc Deposition ◽  
Metal Anode ◽  
Face To Face ◽  
Sodium Metal ◽  
Current Densities ◽  
Superior Cycling Stability ◽  
Metal Anodes

AbstractStable plating/stripping of metal electrodes under high power and high capacity remains a great challenge. Tailoring the deposition behavior on the substrate could partly resolve dendrites’ formation, but it usually works only under low current densities and limited capacities. Here we turn to regulate the separator’s interfacial chemistry through tin coating with decent conductivity and excellent zincophilicity. The former homogenizes the electric field distribution for smooth zinc metal on the substrate, while the latter enables the concurrent zinc deposition on the separator with a face-to-face growth. Consequently, dendrite-free zinc morphologies and superior cycling stability are achieved at simultaneous high current densities and large cycling capacities (1000 h at 5 mA/cm2 for 5 mAh/cm2 and 500 h at 10 mA/cm2 for 10 mAh/cm2). Furthermore, the concept could be readily extended to sodium metal anodes, demonstrating the interfacial chemistry regulation of separator is a promising route to circumvent the metal anode challenges.

scholarly journals Artificial-Noise-Aided Energy-Efficient Secure Multibeam Wireless Communication Schemes Based on Frequency Diverse Array

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Jianbang Gao ◽  
Zhaohui Yuan ◽  
Jing Zhou ◽  
Bin Qiu
Keyword(s):  
Wireless Communication ◽  
Projection Matrix ◽  
Artificial Noise ◽  
Power Requirement ◽  
Precoding Matrix ◽  
Bee Colony ◽  
Received Power ◽  
Security Problem ◽  
New Type ◽  
Frequency Offsets

In this paper, we research synthesis scheme for secure wireless communication in multibeam directional modulation (MBDM) system, which consists of multiple legitimate users (LUs) receiving their own individual confidential messages, respectively, and multiple eavesdroppers (Eves) intercepting confidential messages. We propose a new type of array antennas, termed frequency diverse arrays (FDA), to enhance security of confidential messages. Leveraging FDA technology and artificial noise (AN) technology, we aim to address the PHY security problem for MBDM by jointly optimizing the frequency offsets, the precoding matrix and the AN projection matrix. In the first stage, with known locations of Eves, precoding matrix is designed to minimize Eve’s receiving power of confidential message (Min-ERP), while satisfying power requirement of LUs. And then artificial-noise projection matrix (ANPM) is calculated to enhance AN impact on Eves without influencing LUs. Furthermore, we research a more practical scenario, where locations of Eves are unknown. Unlike the scenario of the known locations of Eves, precoding matrix is designed to maximize AN transmit power (Max-ATP), while satisfying each LU’s requirement received power of confidential message. In the second stage, we analyze and further optimize secrecy capacity. The problem is solved by optimizing frequency offsets through modified artificial bee colony (M-ABC) algorithm. Numerical results show that the proposed scheme can achieve a secure transmission in MBDM system.

Sign in / Sign up

Export Citation Format

Share Document