scholarly journals CONSUMPTION-BASED AND EMBODIED CARBON IN THE BUILT ENVIRONMENT: IMPLICATIONS FOR APEC’S LOW-CARBON MODEL TOWN PROJECT

2020 ◽  
Vol 15 (3) ◽  
pp. 67-82
Author(s):  
David A. Ness ◽  
Ke Xing
Keyword(s):  
Sustainable Development ◽  
Built Environment ◽  
Greenhouse Gas ◽  
Fossil Fuels ◽  
Energy Use ◽  
Ghg Emissions ◽  
Assessment Tools ◽  
Asia Pacific ◽  
Low Carbon ◽  
Embodied Carbon

ABSTRACT In accordance with international protocols and directions, the APEC Energy Working Group has concentrated on constraining operational energy use and greenhouse gas (GHG) emissions in cities across the Asia Pacific, especially from the widespread consumption of fossil fuels. In addition to economy level policies and recognising the different characteristics within the region, APEC has sought to take action at the town/city level via the Low-Carbon Model Town (LCMT) project, including the development of self-assessment tools and indicator systems. However, the “low carbon” landscape is changing. There is increasing recognition of embodied carbon, accompanied by the emergence of methods for its measurement, while the C40 Cities Climate Leadership Group has recently highlighted the significance of consumption-based carbon. Similarly, the Greenhouse Gas Protocol for Cities (GPC) is likely to extend its ambit from Scope 1 GHG emissions, derived from energy use within a city boundaries, and Scope 2 emissions from grid-supplied electricity, heating and / or cooling, to Scope 3 emissions derived from materials and goods produced outside the boundaries of a city but associated with construction within that city. After describing these emerging approaches and the current landscape, the paper examines the significance and implications of these changes for APEC approaches, especially in relation to the LCMT project, its indicators and the varying characteristics of towns and cities within the Asia-Pacific region. Special attention is given to the built environment, which is known to be a major contributor to operational and embodied emissions. Consistent with the theme of the Asia-Pacific Energy Sustainable Development Forum covering “sustainable development of energy and the city,” a case is put forward for the current APEC approach to be extended to encompass both embodied and consumption-based emissions.

scholarly journals Toward a Low-Carbon Transport Sector in Mexico

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 84 ◽  
Author(s):  
Jorge M. Islas-Samperio ◽  
Fabio Manzini ◽  
Genice K. Grande-Acosta
Keyword(s):  
Greenhouse Gas ◽  
Structural Changes ◽  
Energy Use ◽  
Ghg Emissions ◽  
Mitigation Measures ◽  
Transport Sector ◽  
Baseline Scenario ◽  
Low Carbon ◽  
Net Benefit ◽  
Ghg Mitigation

Considering that the world transport sector is the second largest contributor of global greenhouse gas (GHG) emissions due to energy use and the least decarbonized sector, it is highly recommended that all countries implement ambitious public policies to decarbonize this sector. In Mexico the transport sector generates the largest share of greenhouse gas emissions, in 2014 it contributed with 31.3% of net emissions. Two original scenarios for the Mexican transport sector, a no-policy baseline scenario (BLS) and a low carbon scenario (LCS) were constructed. In the LCS were applied 21 GHG mitigation measures, which far exceeds the proposals for reducing transport sector GHG emissions that Mexico submitted in its National Determined Contributions (NDC). As a result, the proposed LCS describes a sector transformation path characterized by structural changes in freight and passenger mobility, new motor technologies for mobility, introduction of biofuels, price signals, transportation practices and regulations, as well as urban planning strategies, which altogether achieve an accumulated reduction of 3166 MtCO2e in a 25 year period, producing a global net benefit of 240,772 MUSD and a GHG emissions’ reduction of 56% in 2035 in relation to the BLS.

scholarly journals LEAP-Based Greenhouse Gases Emissions Peak and Low Carbon Pathways in China’s Tourist Industry

2021 ◽  
Vol 18 (3) ◽  
pp. 1218
Author(s):  
Dandan Liu ◽  
Dewei Yang ◽  
Anmin Huang
Keyword(s):  
Greenhouse Gas ◽  
Global Climate ◽  
Ghg Emissions ◽  
Control Measures ◽  
Growth Potential ◽  
Planning System ◽  
Tourist Industry ◽  
Low Carbon ◽  
Carbon Reduction ◽  
Co2 Equivalent

China has grown into the world’s largest tourist source market and its huge tourism activities and resulting greenhouse gas (GHG) emissions are particularly becoming a concern in the context of global climate warming. To depict the trajectory of carbon emissions, a long-range energy alternatives planning system (LEAP)-Tourist model, consisting of two scenarios and four sub-scenarios, was established for observing and predicting tourism greenhouse gas peaks in China from 2017 to 2040. The results indicate that GHG emissions will peak at 1048.01 million-ton CO2 equivalent (Mt CO2e) in 2033 under the integrated (INT) scenario. Compared with the business as usual (BAU) scenario, INT will save energy by 24.21% in 2040 and reduce energy intensity from 0.4979 tons of CO2 equivalent/104 yuan (TCO2e/104 yuan) to 0.3761 Tce/104 yuan. Although the INT scenario has achieved promising effects of energy saving and carbon reduction, the peak year 2033 in the tourist industry is still later than China’s expected peak year of 2030. This is due to the growth potential and moderate carbon control measures in the tourist industry. Thus, in order to keep the tourist industry in synchronization with China’s peak goals, more stringent measures are needed, e.g., the promotion of clean fuel shuttle buses, the encouragement of low carbon tours, the cancelation of disposable toiletries and the recycling of garbage resources. The results of this simulation study will help set GHG emission peak targets in the tourist industry and formulate a low carbon roadmap to guide carbon reduction actions in the field of GHG emissions with greater certainty.

scholarly journals Greenhouse gas emissions profiles of neighbourhoods in Durban, South Africa – an initial investigation

2017 ◽  
Vol 30 (1) ◽  
pp. 191-214 ◽  
Author(s):  
Meryl Jagarnath ◽  
Tirusha Thambiran
Keyword(s):  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Mitigation Strategies ◽  
Low Carbon ◽  
Economic Activities ◽  
Emissions Inventory ◽  
High Emission ◽  
Development Goals ◽  
Reduce Emissions ◽  
The City

Because current emissions accounting approaches focus on an entire city, cities are often considered to be large emitters of greenhouse gas (GHG) emissions, with no attention to the variation within them. This makes it more difficult to identify climate change mitigation strategies that can simultaneously reduce emissions and address place-specific development challenges. In response to this gap, a bottom-up emissions inventory study was undertaken to identify high emission zones and development goals for the Durban metropolitan area (eThekwini Municipality). The study is the first attempt at creating a spatially disaggregated emissions inventory for key sectors in Durban. The results indicate that particular groups and economic activities are responsible for more emissions, and socio-spatial development and emission inequalities are found both within the city and within the high emission zone. This is valuable information for the municipality in tailoring mitigation efforts to reduce emissions and address development gaps for low-carbon spatial planning whilst contributing to objectives for social justice.

scholarly journals The Impact of Lack of Clean Cooking Fuels on Sustainable Development in Developing Countries

2018 ◽  
Author(s):  
Ifeoluwa Garba ◽  
Richard Bellingham
Keyword(s):  
Sustainable Development ◽  
Developing Countries ◽  
Fossil Fuels ◽  
Energy Use ◽  
Business Models ◽  
Clean Energy ◽  
Well Being ◽  
The World ◽  
Cooking Fuels ◽  
The Impact

Access to energy is crucial in tackling many of the current global development challenges that impact on people’s economic, health and social well-being as well as the ability to meet the commitments of reducing carbon emissions through clean energy use. Despite increased attention from multiple governments and agencies, energy poverty remains a serious sustainable development issue in many developing countries. To date, most research have focused on general access to electricity and the generation of clean energy to replace fossil fuels, failing to address the lack of basic access to clean energy for cooking and heating. More people in the world lack access to clean cooking fuels than to electricity. This issue is one aspect of a broader research which investigates the impacts of optimized energy policy and energy business models on sustainable development in developing countries.

scholarly journals A Review of Geothermal Technologies and Their Role in Reducing Greenhouse Gas Emissions in the USA

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Philip J. Ball
Keyword(s):  
Greenhouse Gas ◽  
Power Plants ◽  
Carbon Tax ◽  
Ghg Emissions ◽  
Abatement Cost ◽  
Combined Cycle ◽  
Low Carbon ◽  
Geothermal Heat ◽  
The Cost

Abstract A review of conventional, unconventional, and advanced geothermal technologies highlights just how diverse and multi-faceted the geothermal industry has become, harnessing temperatures from 7 °C to greater than 350 °C. The cost of reducing greenhouse emissions is examined in scenarios where conventional coal or combined-cycle gas turbine (CCGT) power plants are abated. In the absence of a US policy on a carbon tax, the marginal abatement cost potential of these technologies is examined within the context of the social cost of carbon (SCC). The analysis highlights that existing geothermal heat and power technologies and emerging advanced closed-loop applications could deliver substantial cost-efficient baseload energy, leading to the long-term decarbonization. When considering an SCC of $25, in a 2025 development scenario, geothermal technologies ideally need to operate with full life cycle assessment (FLCA) emissions, lower than 50 kg(CO2)/MWh, and aim to be within the cost range of $30−60/MWh. At these costs and emissions, geothermal can provide a cost-competitive low-carbon, flexible, baseload energy that could replace existing coal and CCGT providing a significant long-term reduction in greenhouse gas (GHG) emissions. This study confirms that geothermally derived heat and power would be well positioned within a diverse low-carbon energy portfolio. The analysis presented here suggests that policy and regulatory bodies should, if serious about lowering carbon emissions from the current energy infrastructure, consider increasing incentives for geothermal energy development.

Rethinking Energy at the Crossroads

2018 ◽  
Author(s):  
Kathleen Araújo
Keyword(s):  
Renewable Energy ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Energy Use ◽  
Clean Energy ◽  
Energy Estimates ◽  
Low Carbon ◽  
Fuel Prices ◽  
New Energy ◽  
Carbon Dioxide Co2

The discovery of oil in Pennsylvania in 1859 was a relatively inconspicuous precursor to what would become an epic shift into the modern age of energy. At the time, the search for “rock oil” was driven by a perception that lighting fuel was running out. Advances in petrochemical refining and internal combustion engines had yet to occur, and oil was more expensive than coal. In less than 100 years, oil gained worldwide prominence as an energy source and traded commodity. Along similar lines, electricity in the early 1900s powered less than 10% of the homes in the United States. Yet, in under a half a century, billions of homes around the world were equipped to utilize the refined form of energy. Estimates indicate that roughly 85% of the world’s population had access to electricity in 2014 (World Bank, n.d.b). For both petroleum and electricity, significant changes in energy use and associated technologies were closely linked to evolutions in infrastructure, institutions, investment, and practices. Today, countless decision-makers are focusing on transforming energy systems from fossil fuels to low carbon energy which is widely deemed to be a cleaner, more sustainable form of energy. As of 2016, 176 countries have renewable energy targets in place, compared to 43 in 2005 (Renewable Energy Policy Network for the 21st Century [REN21], 2017). Many jurisdictions are also setting increasingly ambitious targets for 100% renewable energy or electricity (Bloomberg New Energy Finance [BNEF], 2016). In 2015, the G7 and G20 committed to accelerate the provision of access to renewables and efficiency (REN21, 2016). In conjunction with all of the above priorities, clean energy investment surged in 2015 to a new record of $329 billion, despite low, fossil fuel prices. A significant “decoupling” of economic and carbon dioxide (CO2) growth was also evident, due in part to China’s increased use of renewable energy and efforts by member countries of the Organization for Economic Cooperation and Development (OECD) to foster greater use of renewables and efficiency (REN21, 2016).

Design for Sustainable Data Center Energy Use and Eco-Footprint

2010 ◽  
Author(s):  
Milton Meckler
Keyword(s):  
Data Center ◽  
Air Conditioning ◽  
Fossil Fuels ◽  
Energy Use ◽  
Data Centers ◽  
Ghg Emissions ◽  
High Energy ◽  
Operational Reliability ◽  
Energy Utilization ◽  
Air Conditioning Systems

What does remain a growing concern for many users of Data Centers is their continuing availability following the explosive growth of internet services in recent years, The recent maximizing of Data Center IT virtualization investments has resulted in improving the consolidation of prior (under utilized) server and cabling resources resulting in higher overall facility utilization and IT capacity. It has also resulted in excessive levels of equipment heat release, e.g. high energy (i.e. blade type) servers and telecommunication equipment, that challenge central and distributed air conditioning systems delivering air via raised floor or overhead to rack mounted servers arranged in alternate facing cold and hot isles (in some cases reaching 30 kW/rack or 300 W/ft2) and returning via end of isle or separated room CRAC units, which are often found to fight each other, contributing to excessive energy use. Under those circumstances, hybrid, indirect liquid cooling facilities are often required to augment above referenced air conditioning systems in order to prevent overheating and degradation of mission critical IT equipment to maintain rack mounted subject rack mounted server equipment to continue to operate available within ASHRAE TC 9.9 prescribed task psychometric limits and IT manufacturers specifications, beyond which their operational reliability cannot be assured. Recent interest in new web-based software and secure cloud computing is expected to further accelerate the growth of Data Centers which according to a recent study, the estimated number of U.S. Data Centers in 2006 consumed approximately 61 billion kWh of electricity. Computer servers and supporting power infrastructure for the Internet are estimated to represent 1.5% of all electricity generated which along with aggregated IT and communications, including PC’s in current use have also been estimated to emit 2% of global carbon emissions. Therefore the projected eco-footprint of Data Centers into the future has now become a matter of growing concern. Accordingly our paper will focus on how best to improve the energy utilization of fossil fuels that are used to power Data Centers, the energy efficiency of related auxiliary cooling and power infrastructures, so as to reduce their eco-footprint and GHG emissions to sustainable levels as soon as possible. To this end, we plan to demonstrate significant comparative savings in annual energy use and reduction in associated annual GHG emissions by employing a on-site cogeneration system (in lieu of current reliance on remote electric power generation systems), introducing use of energy efficient outside air (OSA) desiccant assisted pre-conditioners to maintain either Class1, Class 2 and NEBS indoor air dew-points, as needed, when operated with modified existing (sensible only cooling and distributed air conditioning and chiller systems) thereby eliminating need for CRAC integral unit humidity controls while achieving a estimated 60 to 80% (virtualized) reduction in the number servers within a existing (hypothetical post-consolidation) 3.5 MW demand Data Center located in southeastern (and/or southern) U.S., coastal Puerto Rico, or Brazil characterized by three (3) representative microclimates ranging from moderate to high seasonal outside air (OSA) coincident design humidity and temperature.

scholarly journals Potential and Impacts of Cogeneration in Tropical Climate Countries: Ecuador as a Case Study

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5254
Author(s):  
Manuel Raul Pelaez-Samaniego ◽  
Juan L. Espinoza ◽  
José Jara-Alvear ◽  
Pablo Arias-Reyes ◽  
Fernando Maldonado-Arias ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Fossil Fuels ◽  
Energy Use ◽  
National Level ◽  
Ghg Emissions ◽  
Industrial Sector ◽  
Increase Energy Efficiency ◽  
High Dependency ◽  
Generation Capacity ◽  
Tropical Climates

High dependency on fossil fuels, low energy efficiency, poor diversification of energy sources, and a low rate of access to electricity are challenges that need to be solved in many developing countries to make their energy systems more sustainable. Cogeneration has been identified as a key strategy for increasing energy generation capacity, reducing greenhouse gas (GHG) emissions, and improving energy efficiency in industry, one of the most energy-demanding sectors worldwide. However, more studies are necessary to define approaches for implementing cogeneration, particularly in countries with tropical climates (such as Ecuador). In Ecuador, the National Plan of Energy Efficiency includes cogeneration as one of the four routes for making energy use more sustainable in the industrial sector. The objective of this paper is two-fold: (1) to identify the potential of cogeneration in the Ecuadorian industry, and (2) to show the positive impacts of cogeneration on power generation capacity, GHG emissions reduction, energy efficiency, and the economy of the country. The study uses methodologies from works in specific types of industrial processes and puts them together to evaluate the potential and analyze the impacts of cogeneration at national level. The potential of cogeneration in Ecuador is ~600 MWel, which is 12% of Ecuador’s electricity generation capacity. This potential could save ~18.6 × 106 L/month of oil-derived fuels, avoiding up to 576,800 tCO2/year, and creating around 2600 direct jobs. Cogeneration could increase energy efficiency in the Ecuadorian industry by up to 40%.

Greenhouse Gas Emissions from Refrigeration Equipment in Malaysia

2009 ◽  
Vol 20 (4) ◽  
pp. 533-551 ◽  
Author(s):  
R Saidur ◽  
MA Sattar ◽  
H.H. Masjuki ◽  
M.Y. Jamaluddin
Keyword(s):  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Environmental Protection Agency ◽  
Fossil Fuels ◽  
Energy Savings ◽  
Ghg Emissions ◽  
Electricity Consumption ◽  
Air Conditioner ◽  
Gas Emissions ◽  
Refrigeration Equipment

This paper presents an analysis of the greenhouse gas (GHG) emissions from refrigeration equipment. The refrigeration equipments use refrigerants such as chlorofluorocarbons (CFCs) and hydrofluorocarbons HFCs, which are believed to contribute the ozone depletion and global warming. Refrigeration equipment thus contributes indirectly through emission due to electricity consumption and directly due to the emission of refrigerants. Greenhouse gas emissions resulting from the burning of fossil fuels are quantified and presented in this paper. The calculation was carried out based on emissions per unit electricity generated and the type of fuel used. The direct emission of refrigerant was calculated based on emission factor and according to the procedure of Environmental Protection Agency (EPA), USA. A study was conducted to evaluate the refrigerant losses to the atmosphere and the CO2 emission from fossil fuels to generate power to run the refrigeration and air-conditioning systems. In this paper, total appliance annual energy consumption by refrigerator-freezer and air conditioner as well as emission has been estimated for a period of 19 years (1997–2015) using the survey data. Energy savings and emission reductions achievable by raising thermostat set point temperature have been calculated for a period of 10 (i.e. 2005–2015) years.

Sign in / Sign up

Export Citation Format

Share Document