Green Computing as an Ecological Aid in Industry

2012 ◽  
pp. 132-145
Author(s):  
Oliver Avram ◽  
Ian Stroud ◽  
Paul Xirouchakis
Keyword(s):  
Machine Tools ◽  
Manufacturing Industry ◽  
Point Of View ◽  
Cutting Fluid ◽  
Computer Tool ◽  
Ecological Evaluation ◽  
Process Characteristics ◽  
Complex Process ◽  
Use Phase ◽  
Manufacturing Machine

This chapter concerns the use of computing for ecological evaluation in the manufacturing industry. Here, ecological evaluation means identification and quantisation of various manufacturing process characteristics from the point of view of the environment. Manufacturing is a complex process with many different interactions between the parameters controlling the manufacturing machine tools. In the past, manufacturing planners and operators have set these parameters without understanding the consequences, leading to resource waste of energy, cutting fluid, and so on. This chapter presents a computer tool for evaluating and quantifying the effects of different manufacturing choices using chosen criteria. The tool was implemented as part of the work for a European project. It is based on an extensive analysis of machine tools to provide a way of handling the complexities of understanding the use phase of products.

Green Computing as an Ecological Aid in Industry

2012 ◽  
pp. 1903-1915
Author(s):  
Oliver Avram ◽  
Ian Stroud ◽  
Paul Xirouchakis
Keyword(s):  
Machine Tools ◽  
Manufacturing Industry ◽  
Point Of View ◽  
Cutting Fluid ◽  
Computer Tool ◽  
Ecological Evaluation ◽  
Process Characteristics ◽  
Complex Process ◽  
Use Phase ◽  
Manufacturing Machine

This chapter concerns the use of computing for ecological evaluation in the manufacturing industry. Here, ecological evaluation means identification and quantisation of various manufacturing process characteristics from the point of view of the environment. Manufacturing is a complex process with many different interactions between the parameters controlling the manufacturing machine tools. In the past, manufacturing planners and operators have set these parameters without understanding the consequences, leading to waste of energy, cutting fluid, and so on. This chapter presents a computer tool for evaluating and quantifying the effects of different manufacturing choices using chosen criteria. The tool was implemented as part of the work for a European project. It is based on an extensive analysis of machine tools to provide a way of handling the complexities of understanding the use phase of products.

Methods of Network Planning and Management when Implementing Territory Planning Projects

2019 ◽  
pp. 49-54
Keyword(s):  
Large Scale ◽  
Housing Stock ◽  
Network Planning ◽  
Network Models ◽  
Point Of View ◽  
Residential Areas ◽  
Basic Principles ◽  
Planning And Management ◽  
Planning Project ◽  
Complex Process

The success of the Program of housing stock renovation in Moscow depends on the efficiency of resource management. One of the main urban planning documents that determine the nature of the reorganization of residential areas included in the Program of renovation is the territory planning project. The implementation of the planning project is a complex process that has a time point of its beginning and end, and also includes a set of interdependent parallel-sequential activities. From an organizational point of view, it is convenient to use network planning and management methods for project implementation. These methods are based on the construction of network models, including its varieties – a Gantt chart. A special application has been developed to simulate the implementation of planning projects. The article describes the basic principles and elements of modeling. The list of the main implementation parameters of the Program of renovation obtained with the help of the developed software for modeling is presented. The variants of using the results obtained for a comprehensive analysis of the implementation of large-scale urban projects are proposed.

An Attempt of Error Tracing and Compensation Method of the Linkage Error of Five-Axis CNC Machine Tool

2018 ◽  
Author(s):  
Zhong Jiang ◽  
Jiexiong Ding ◽  
Qicheng Ding ◽  
Li Du ◽  
Wei Wang
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Manufacturing Industry ◽  
Complex Surface ◽  
Compensation Method ◽  
Cnc Machine ◽  
Linkage Error ◽  
Error Tracing ◽  
Five Axis ◽  
Five Axes

Nowadays the five-axis machine tool is one of the most important foundations of manufacturing industry. To guarantee the accuracy of the complex surface machining, multi-axis linkage performance detection and compensation of five-axis machine tools is necessary. RTCP (Rotation Tool Center Point) is one of the basic essential functions for the five-axis machine tools, which can keep the tool center with the machining trajectory when five axes move synchronously. On the basis of RTCP function, a way to detect multi-axes linkage performance of five-axis machine tools is briefly introduced, and linkage error model is built in accordance with the topological structure of machine tool. Based on the feature of the linkage errors of the five-axis machine tool, the error tracing and compensation method is proposed. Some simulations and experiments that verify the error tracing method could locate the linkage error category are established. Therefore, a new attempt to detect and compensate the linkage error of the five-axis machine tool is provided in this paper.

A discussion on ship technology in the 1980s - Shipbuilding in the future

1972 ◽  
Vol 273 (1231) ◽  
pp. 13-21 ◽  
Keyword(s):  
Industrial Development ◽  
Manufacturing Industry ◽  
Group Technology ◽  
Modern Technology ◽  
Point Of View ◽  
Production Lines ◽  
The Road ◽  
Craft Industry ◽  
And Control ◽  
Capital Intensive

The growth in world trade and hence the demand for shipping is expected to continue into the 1980s despite the present temporary recession. Many countries in the Mediterranean and Pacific area and in South and Central America see shipbuilding as their way to start along the road to industrial development, and will be favoured by good climatic and labour conditions which can now be joined to imported modern technology. Conventional shipbuilding will therefore grow rapidly in these countries. Western countries will be able to preserve their shipbuilding industries by keeping in the forefront ol technical development and by a rigorous examination of designs from the production point of view, in order to reduce the labour content, and make the management and control simpler. This means changing from a largely labour intensive craft industry to a capital intensive, manufacturing industry. In order to sustain this type of industry long runs of similar ships, standard components, modulai constructions much of it in production lines, using group technology, will be the pattern in the 1980s. Much research and development is already devoted to these techniques and the industry is already at the early stages of changing over to this type of working.

scholarly journals Exchange rate regime choice

2006 ◽  
Vol 53 (3) ◽  
pp. 313-334 ◽  
Author(s):  
Emilija Beker
Keyword(s):  
Decision Making ◽  
Exchange Rate ◽  
Shelf Life ◽  
Exchange Rate Regime ◽  
Flexible Exchange Rate ◽  
Point Of View ◽  
External Factors ◽  
Advantages And Disadvantages ◽  
Complex Process ◽  
Highly Sensitive

The choice of an adequate exchange rate regime proves to be a highly sensitive field within which the economic authorities present and confirm themselves. The advantages and disadvantages of fixed and flexible exchange rate regimes, which have been quite relativized from the conventional point of view, together with simultaneous, but not synchronized effects of structural and external factors, remain permanently questioned throughout a complex process of exchange rate regime decision making. The paper reflects the attempt of critical identification of the key exchange rate performances with emphasis on continuous non-uniformity and (un)certainty of shelf life of a relevant choice.

scholarly journals The Innovation Type and Strategy Implemented by Chinese SMEs: Case Study of Manufacturing Industry in Shanghai

2017 ◽  
Vol 8 (2) ◽  
pp. 907-915
Author(s):  
Khaled Mohammed Alqahtani
Keyword(s):  
Manufacturing Industry ◽  
Organizational Innovation ◽  
Small And Medium Enterprises ◽  
Point Of View ◽  
Innovation Strategy ◽  
Structured Interviews ◽  
Cluster Strategy ◽  
Medium Enterprises ◽  
Social Wealth ◽  
Innovation Type

In China, small and medium enterprises (SMEs) play a crucial role in economic development and social wealth in terms of GDP growth, employment creation and poverty alleviation. In the age of technology and information, innovation has been regarded as one of the most significant drivers for the growth and prosperity of SMEs. Therefore, it is necessary for SMEs to implement innovation strategy, which would help them to initiate new products, adopt new processes and increase their competitiveness. From this point of view, this study attempts to identify the innovation situation of Chinese SMEs with regard to innovation type as well as innovation strategy. The research data is collected through structured questionnaires and semi-structured interviews from SMEs of manufacturing industry in Shanghai, China. According to the data results, process innovation and marketing innovation are adopted more frequently than product innovation and organizational innovation by Chinese SMEs. This study also demonstrates most SMEs in China implement free-riding strategy; some of them adopt niche strategy; and few SMEs practice cluster strategy. Although innovation is increasingly important for Chinese SMEs, their implementation of innovation strategy is not highly effective and successful.

FORMATION OF SILICON CARBIDE COATINGS BY CHEMICAL VAPOR DEPOSITION (review). Part 1

2021 ◽  
pp. 100-111
Author(s):  
D.V. Sidorov ◽  
◽  
A.A. Schavnev ◽  
A.A. Melentev ◽  
◽  
...  
Keyword(s):  
Silicon Carbide ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Point Of View ◽  
Technological Parameters ◽  
Technical Literature ◽  
Pure Silicon ◽  
Carbide Coatings ◽  
Complex Process

The article provides an overview of the scientific and technical literature in the field of the formation of silicon carbide coatings by chemical vapor deposition (CVD). CVD is a complex process, approaches to which vary depending on the tasks being solved. Depending on the technological parameters, the initial reagents, the substrate for deposition, the type and design of the CVD reactors, it is possible to achieve both the deposition of pure silicon carbide and the co-deposition of silicon and/or carbon. In the first part of the article, attention is paid to the study of CVD from the point of view of the mechanisms of chemical reactions, the design of the deposition apparatus, the substrates for deposition.

Strategic Inertia vs. Strategic Change

2019 ◽  
pp. 1803-1821
Author(s):  
Silvia Vernizzi ◽  
Andrea Beretta Zanoni ◽  
Meir Russ
Keyword(s):  
Human Capital ◽  
Attitude Change ◽  
Strategic Change ◽  
Point Of View ◽  
Business Strategies ◽  
Strategy Formulation ◽  
Case Study Methodology ◽  
Complex Process ◽  
Study Methodology

Increasingly dynamic, complex and unpredictable economic circumstances require continuous and systematic re-evaluations of business strategies and plans and coherent and effective strategy implementation. Adopting the Resource Based View theoretical framework this chapter is aimed at shedding light on the role of human capital in the strategic change process. Specifically, by adopting the case study methodology the chapter points out the relevance and critical nature of human capital in the complex process that has driven Fiat's competitive and financial turnaround since 2008. Through the lens of Fiat's case, the article contributes both from an academic and a practitioner point of view, to shed light on the relevance of human capital in organizational attitude change, strategy formulation, choices implementation, and more in general, in Fiat's business model re-definition. The chapter ends with case questions.

Acceptance of ERP Solutions in Maturity Use Phase

2012 ◽  
Vol 1 (3) ◽  
pp. 18-44 ◽  
Author(s):  
Simona Sternad ◽  
Samo Bobek
Keyword(s):  
Technology Acceptance ◽  
Enterprise Resource Planning ◽  
Implementation Process ◽  
Global Solutions ◽  
Personal Characteristics ◽  
Resource Planning ◽  
User Acceptance ◽  
Process Characteristics ◽  
Use Phase ◽  
Acceptance Model

Enterprise resource planning (ERP) solutions have been implemented in a lot of organizations in the past few years. Notwithstanding the fact that ERP solutions benefit organizations only to the extent that users accept and use them, most studies regarding ERP solutions today refer to selection and implementation process. The most widely used model in the area of investigating user acceptance is technology acceptance model (TAM) proposed by Davis (1989). In this paper, the TAM was extended to measure groups of extended factors (personal characteristics and information literacy, system and technological characteristics and organizational-process characteristics) that influence ERP acceptance. Because ERP solutions are implemented in different organization types and by different methodology, the authors also analyze external factors importance regarding user acceptance of two global solutions – SAP and Microsoft Dynamics.

Beyond basic communication: The role of the mother tongue in cognitive-behavioral therapy (CBT)

2020 ◽  
Vol 24 (4) ◽  
pp. 881-892
Author(s):  
Michal Tannenbaum ◽  
Eden Har
Keyword(s):  
Cognitive Behavioral Therapy ◽  
Minority Groups ◽  
Mother Tongue ◽  
Behavioral Therapy ◽  
Therapeutic Process ◽  
Point Of View ◽  
Cognitive Behavioral ◽  
Theoretical Understanding ◽  
Complex Process ◽  
Understanding Emotions

Immigration is a crisis-prone, complex process, often involving the need to acquire a new language, frequently at the expense of the mother tongue. Thus, the phenomenon of immigrants requiring various forms of mental health assistance while having limited fluency in the therapist’s language is widespread. Cognitive behavioral therapy (CBT) has become a widely prevalent therapeutic approach in many countries, including countries absorbing immigrants. This article reviews case studies that relate to the use of CBT with immigrants, both in individual and group sessions, focusing on the position of the patient’s mother tongue in the process. Research has persistently shown that the mother tongue is emotionally significant—using it, being exposed to it, expressing emotions and understanding emotions expressed in it, having access to it and to memories encoded in it, and the like. Given these dimensions, it plays a potentially important role in the therapeutic process. The pivotal question, then, is whether a therapeutic process that is essentially emotional can be effective if the mother tongue is not an inherent part of it. This article addresses this issue while examining the mother tongue’s position in CBT, the therapists’ awareness of these issues, the accommodations, if any, made in this regard, the therapists’ point of view, and suggestions for improving the use of CBT with immigrants. It is written to be of relevance to a diverse audience including researchers from varied disciplinary backgrounds, therapists who work with multilingual patients (especially immigrants or members of other minority groups) or are multilingual themselves. Our aims, therefore, are to contribute to the theoretical understanding of the mother tongue’s centrality in emotional processes and to offer some practical recommendations for therapists and training institutions.

Sign in / Sign up

Export Citation Format

Share Document