The Design and Performance of a CORBA Audio/Video Streaming Service

2011 ◽  
pp. 54-101
Author(s):  
Naga Surendran ◽  
Yamuna Krishamurthy ◽  
Douglas C. Schmidt
Keyword(s):  
File Transfer ◽  
Network Bandwidth ◽  
Processing Power ◽  
Bulk Data ◽  
Streaming Service ◽  
And Performance ◽  
Audio Video ◽  
Media Applications ◽  
Stringent Quality

Advances in network bandwidth and CPU processing power have enabled the emergence of multimedia applications, such as teleconferencing or streaming video, that exhibit significantly more diverse and stringent quality-of-service (QoS) requirements than traditional data-oriented applications, such as file transfer or email. For instance, popular Internet-based streaming mechanisms, such as Realvideo (RealNetworks, 1998) and Vxtreme (Vxtreme, 1998), allow suppliers to transmit continuous streams of audio and video packets to consumers. Likewise, non-continuous media applications, such as medical imaging servers (Hu et al., 1998) and network management agents (Schmidt and Suda, 1994), employ streaming to transfer bulk data efficiently from suppliers to consumers.

Adaptive Streaming Server dengan FFMPEG dan Golang

2021 ◽  
Vol 5 (3) ◽  
pp. 413-420
Author(s):  
David Kristiadi ◽  
Marwiyati
Keyword(s):  
Total Duration ◽  
Adaptive Streaming ◽  
Test Results ◽  
Streaming Server ◽  
Network Bandwidth ◽  
Concurrent Execution ◽  
Streaming Service ◽  
Network Speed ◽  
Transcoding Service

Quality of experience (QoE) when accessing video streaming becomes a challenge in varieties of network bandwidth/speed. Adaptive streaming becomes an answer to gain good QoE. An architecture system of the adaptive streaming server with Dynamic Adaptive Streaming over HTTP (DASH) was proposed. The system was consists of two services e.g transcoding and streaming. Transcoding service encodes an audio file, multi-bitrates video files, and manifest.mpd files. Streaming service serves client streaming requests that appropriate to client network profiles. The system is built using the Golang programming environment and FFMPEG. Transcoding service has some execution mode (serial and concurrent) and passing mode (1 pass and 2 passes). The transcoding service test results show that concurrent execution is faster 11,5% than the serial execution and transcoding using 1 pass is faster 46,95% than 2 passes but the bitrate of output video lower than the determinate bitrate parameter.  The streaming service has a good QoE. In the 5 scenarios, buffer level=0 happens 5 times, and its total duration is 64 seconds. Buffer level=0 happens when extreme changes happen in network speed from fast to too slow.  

scholarly journals Mobile Edge Assisted Live Streaming System for Omnidirectional Video

2019 ◽  
Vol 2019 ◽  
pp. 1-15
Author(s):  
Xinjue Hu ◽  
Wei Quan ◽  
Tao Guo ◽  
Yu Liu ◽  
Lin Zhang
Keyword(s):  
Service Evaluation ◽  
Base Stations ◽  
Live Streaming ◽  
Prototype System ◽  
Network Bandwidth ◽  
Bandwidth Requirement ◽  
On Demand ◽  
Prediction Module ◽  
Streaming Service

As a popular form of virtual reality (VR) media, omnidirectional video (OV) has been continuously developed in recent years. OV contains the view of the scene in every direction, which will ask for around 120 Mbps with 8k resolution and 25 fps (frames per second). Although there has been a lot of work to optimize the transmission for on-demand of OV, the research on the live streaming of OV is still very lacking. Another big challenge for the OV live streaming system is the huge demand for computing resources. The existing terminal devices are difficult to completely carry tasks such as stitching, encoding, and rendering. This paper proposes a mobile edge assisted live streaming system for omnidirectional video (MELiveOV); the MELiveOV can intelligently offload the processing tasks to the edge computing enabled 5G base stations. The MELiveOV consists of an omnidirectional video generation module, a streaming module, and a viewpoint prediction module. A prototype system of MELiveOV is implemented to prove its complete end-to-end OV live streaming service. Evaluation result demonstrates that compared with the traditional solution, MELiveOV can reduce the network bandwidth requirement by about 50% and the transmission delay of more than 70% while ensuring the quality of the user’s experience.

scholarly journals Quality analysis of a learning media analog electronics on the Android platform with ISO 25010

2021 ◽  
Vol 4 (1) ◽  
pp. 112
Author(s):  
Barry Nur Setyanto ◽  
Mushlihudin Mushlihudin ◽  
David Yoga Pradana
Keyword(s):  
Data Collection ◽  
Quality Analysis ◽  
Product Analysis ◽  
Analog Electronics ◽  
Quality Aspects ◽  
The Media ◽  
And Performance ◽  
Media Learning ◽  
Media Applications

The design of analog electronics learning media applications needs quality analysis. ISO 25010 is one of the standard references in measuring the quality of an Android-based application product. Analysis that can be done is by testing the compatibility and performance efficiency aspect of the media being developed. This study uses a Research and Development (R&D) method with the ADDIE development model which will produced a quality analog electronics learning media application. Data collection was conducted used a cloud testing and direct testing. Before data collection was conducted validity of media by expert judgement. The results showed that media is "valid" and the quality of the compatibility aspect this media learning was supported on more than 208 smartphones android device and performance efficiency predicate “Satisfied” so that the application could be used for the learning process during the COVID-19 pandemic or tested on other quality aspects.

scholarly journals QoE Optimization in a Live Cellular Network through RLC Parameter Tuning

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5619
Author(s):  
Jessica Mendoza ◽  
Isabel de-la-Bandera ◽  
David Palacios ◽  
Raquel Barco
Keyword(s):  
Communication Networks ◽  
Mobile Networks ◽  
Cellular Network ◽  
Parameter Tuning ◽  
Optimization Techniques ◽  
Radio Link ◽  
Network Simulator ◽  
File Transfer ◽  
Streaming Service

The mobile communication networks sector has experienced a great evolution during the last few years. The emergence of new services as well as the growth in the number of subscribers have motivated the search for new ways to optimize mobile networks. In this way, the objective pursued by optimization techniques has been evolving, shifting from the traditional optimization of radio parameters to the improvement of the quality perceived by users, known as quality of experience (QoE). In mobile networks, the radio link control (RLC) layer provides a reliable link between both ends of the communication and has a great impact on the QoE. In this paper, the optimization of the QoE for users based on the adjustment of the RLC layer is proposed. For this purpose, two typical services demanded by the users of mobile networks have been selected: the real-time video streaming service and file transfer service. For a broader view of the behavior of the QoE in relation to RLC, optimization tests have been carried out in scenarios with different system bandwidths. In this way, the relationship between the QoE and the optimal configuration of RLC in different network load situations has been analyzed. A proof of concept has been carried out to show the capability of this optimization. To that end, both a cellular network simulator and a live cellular network devised for research purposes have been used.

LIGHTING AND PERFORMANCE: AN ANALYSIS ON LIGHTING EFFICIENCY OF ARCHITECTURE STUDIO

2019 ◽  
Vol 1 (1) ◽  
pp. 92
Author(s):  
Fazidah Hanim Husain
Keyword(s):  
Learning Environment ◽  
Comfort Level ◽  
Artificial Lighting ◽  
Level Measurement ◽  
Acceptable Range ◽  
Creative Learning ◽  
Illuminance Level ◽  
And Performance ◽  
Effect Of Light

Lighting is one of the key elements in any space and building infrastructure. Good design for an area in the building requires sufficient light that contributes to the efficiency of the activities. The correct method allows natural light to transmit, reduce heat and glare in providing a conducive learning environment. Light plays a significant influence to the quality of space and contributes focus of the students in an architecture studio. Previous research has shown that the effect of light also controlled emotions, behavior, and mood of the students. The operations of artificial lighting that have been used most of the time in an architecture studio during day and night may create lavishness and inadequacy at the same time. Therefore, this paper focuses on the identifying the quality of light for the architecture studio in UiTM (Perak), to instill a creative learning environment. Several methodologies adopted in this study such as illuminance level measurement using lux meter (LM-8100), and a questionnaire survey in gauging the lighting comfort level from students’ perspective. The study revealed that the illuminance level in the architecture studio is insufficient and not in the acceptable range stated in the Malaysian: Standards 1525:2007 and  not evenly distributed.  The study also concluded that the current studio environment is not condusive and appears monotonous. 

Strategic threats to energy security as risks of quality of people's life

2020 ◽  
Vol 16 (4) ◽  
pp. 730-744
Author(s):  
V.I. Loktionov
Keyword(s):  
Quality Of Life ◽  
Energy Security ◽  
Well Being ◽  
Scientific Methods ◽  
Analysis And Synthesis ◽  
General Scientific ◽  
And Performance ◽  
Economic Well Being ◽  
The Way

Subject. The article reviews the way strategic threats to energy security influence the quality of people's life. Objectives. The study unfolds the theory of analyzing strategic threats to energy security by covering the matter of quality of people's life. Methods. To analyze the way strategic threats to energy security spread across cross-sectoral commodity and production chains and influences quality of people's living, I applied the factor analysis and general scientific methods of analysis and synthesis. Results. I suggest interpreting strategic threats to energy security as risks of people's quality of life due to a reduction in the volume of energy supply. I identified mechanisms reflecting how the fuel and energy complex and its development influence the quality of people's life. The article sets out the method to assess such quality-of-life risks arising from strategic threats to energy security. Conclusions and Relevance. In the current geopolitical situation, strategic threats to energy security cause long-standing adverse consequences for the quality of people's life. If strategic threats to energy security are further construed as risk of quality of people's life, this will facilitate the preparation and performance of a more effective governmental policy on energy, which will subsequently raise the economic well-being of people.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

scholarly journals The possibility of using lactic additives and sonochemical technology in the production of preserves

2020 ◽  
Vol 164 ◽  
pp. 06012
Author(s):  
Vera Demchenko ◽  
Irina Asfondiarova ◽  
Nina Katkova ◽  
Marina Ivanova ◽  
Elena Belokurova
Keyword(s):  
Ultrasonic Treatment ◽  
Storage Temperature ◽  
Food Additives ◽  
Microbiological Quality ◽  
Point Scale ◽  
Resource Saving ◽  
High Quality ◽  
Processing Power ◽  
Fish Product

The priority in improving the existing methods of processing fish is salting with the use of food additives with different functional orientations. The aim of the study was the development of preserves with the introduction of lactate-containing additives and using sonochemical technologies; examination of the quality of the products obtained according to organoleptic and microbiological safety indicators. The article proposes a resource-saving technology for the production of fish products with prolonged shelf life due to the use of a complex food additive consisting of lactic, acetic, propionic acids and their salts in different proportions with subsequent ultrasonic treatment using the ultrasonic generator of the Wave series model UZTA-0 2/22-OM. There was established the optimal mode of using the ultrasonic processing power of 75 W / m2 in the manufacture of fish preserves from herring. Organoleptic and microbiological quality indicators were studied during storage of preserved products with the addition of additives and ultrasonic treatment compared to the control. Organoleptic assessment was carried out on a five-point scale, microbiological indicators were studied by standard methods. The Dilactin Forte Plus dietary supplement in the composition of preserves in the amount of 3% and in combination with the use of sonochemical technologies makes it possible to obtain a safe high-quality fish product. Manufactured preserves at a storage temperature of 0 ± 2 ° C can maintain their high quality for 5 months.

scholarly journals Manufacturing and development of a bolted GFRP flange joint for oil and gas applications

2021 ◽  
pp. 095440542198951
Author(s):  
Muhsin Aljuboury ◽  
Md Jahir Rizvi ◽  
Stephen Grove ◽  
Richard Cullen
Keyword(s):  
Pressure Vessel ◽  
Oil And Gas ◽  
Polyester Resin ◽  
High Strength ◽  
Adhesively Bonded ◽  
Acceptable Quality ◽  
Composite Pipe ◽  
And Performance ◽  
Composite Pipes

The goal of this experimental study is to manufacture a bolted GFRP flange connection for composite pipes with high strength and performance. A mould was designed and manufactured, which ensures the quality of the composite materials and controls its surface grade. Based on the ASME Boiler and Pressure Vessel Code, Section X, this GFRP flange was fabricated using biaxial glass fibre braid and polyester resin in a vacuum infusion process. In addition, many experiments were carried out using another mould made of glass to solve process-related issues. Moreover, an investigation was conducted to compare the drilling of the GFRP flange using two types of tools; an Erbauer diamond tile drill bit and a Brad & Spur K10 drill. Six GFRP flanges were manufactured to reach the final product with acceptable quality and performance. The flange was adhesively bonded to a composite pipe after chamfering the end of the pipe. Another type of commercially-available composite flange was used to close the other end of the pipe. Finally, blind flanges were used to close both ends, making the pressure vessel that will be tested under the range of the bolt load and internal pressure.

Sign in / Sign up

Export Citation Format

Share Document