An Improved Network Congestion Control Strategy Based on Active Source and Link Management

2020 ◽  
Vol 11 (1) ◽  
pp. 58-73
Author(s):  
Xushi Mei ◽  
Xiaolong Chen
Keyword(s):  
Historical Change ◽  
Network Congestion ◽  
Theory Analysis ◽  
Improvement Strategy ◽  
Fast Tcp ◽  
Network Parameters ◽  
Management Algorithm ◽  
Tcp Protocol ◽  
The Stability ◽  
The Relationship

When a source end adopted FAST TCP to actively control the sending window, and the link end adopted active queue management algorithm, if the network parameters were improperly set, the system can be unstable. The relationship between the stability and network parameters was quantitatively analyzed. Aiming at the defect of network instability caused by radical window halving strategy, a new method based on stability analysis was proposed to make full use of the historical change information obtained by the source-end and to improve the window adjusting strategy of FAST TCP protocol according to the congestion status. Thus, the parameters of the active queue controller was modified indirectly to improve the stability of the system. Ns-2 simulation result verified the accuracy of the stability theory analysis and the effectiveness of the improvement strategy.

scholarly journals An Improved Algorithm to Enhance the Performance of FAST TCP Congestion Control for Personalized Healthcare Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Jiyang Ye ◽  
Bowen Huang ◽  
Xiaolong Chen
Keyword(s):  
Control Law ◽  
Network System ◽  
Improved Method ◽  
Medical Systems ◽  
Queuing Delay ◽  
Slow Start ◽  
Fast Tcp ◽  
Tcp Protocol ◽  
Tcp Network ◽  
The Stability

The development of personalized medical systems should be supported by a fast and stable network system. The FAST TCP network system is the appropriate support system for this purpose. However, when the FAST TCP is deployed, the static mapping selection method for protocol parameters is unable to guarantee the small queuing delay and fast convergence of the network simultaneously. By conducting theoretical analysis and simulation experiments, the relationships among FAST TCP protocol slow start condition, control law gain parameters, and FAST TCP system convergence rate were examined. To ensure the stability of the FAST TCP system and to select the smallest protocol parameters, an improved method to effectively accelerate the convergence velocity of the FAST TCP system is proposed in this study. In this method, the number of packets for staying in the buffer for FAST TCP connections was taken as the criterion of the slow start, and the gain parameter of the control law was dynamically adjusted according to the local information of each FAST TCP connection. Using this improved method, the FAST TCP system can achieve a stable and small queuing delay, whilst the FAST TCP system could converge quickly to the equilibrium point simultaneously.

An Experimental Investigation on Thermal Conductivity and Viscosity of Graphene doped CNTs /TiO2 Nanofluid

2020 ◽  
Vol 17 (3) ◽  
Author(s):  
A.M. Zetty Akhtar ◽  
M.M. Rahman ◽  
K. Kadirgama ◽  
M.A. Maleque
Keyword(s):  
Thermal Conductivity ◽  
Zeta Potential ◽  
Base Fluid ◽  
Minimum Quantity Lubrication ◽  
Cutting Fluid ◽  
Cutting Zone ◽  
Observation Method ◽  
The Stability ◽  
The Relationship ◽  
Zeta Potential Analysis

This paper presents the findings of the stability, thermal conductivity and viscosity of CNTs (doped with 10 wt% graphene)- TiO2 hybrid nanofluids under various concentrations. While the usage of cutting fluid in machining operation is necessary for removing the heat generated at the cutting zone, the excessive use of it could lead to environmental and health issue to the operators. Therefore, the minimum quantity lubrication (MQL) to replace the conventional flooding was introduced. The MQL method minimises the usage of cutting fluid as a step to achieve a cleaner environment and sustainable machining. However, the low thermal conductivity of the base fluid in the MQL system caused the insufficient removal of heat generated in the cutting zone. Addition of nanoparticles to the base fluid was then introduced to enhance the performance of cutting fluids. The ethylene glycol used as the base fluid, titanium dioxide (TiO2) and carbon nanotubes (CNTs) nanoparticle mixed to produce nanofluids with concentrations of 0.02 to 0.1 wt.% with an interval of 0.02 wt%. The mixing ratio of TiO2: CNTs was 90:10 and ratio of SDBS (surfactant): CNTs was 10:1. The stability of nanofluid checked using observation method and zeta potential analysis. The thermal conductivity and viscosity of suspension were measured at a temperature range between 30˚C to 70˚C (with increment of 10˚C) to determine the relationship between concentration and temperature on nanofluid’s thermal physical properties. Based on the results obtained, zeta potential value for nanofluid range from -50 to -70 mV indicates a good stability of the suspension. Thermal conductivity of nanofluid increases as an increase of temperature and enhancement ratio is within the range of 1.51 to 4.53 compared to the base fluid. Meanwhile, the viscosity of nanofluid shows decrements with an increase of the temperature remarks significant advantage in pumping power. The developed nanofluid in this study found to be stable with enhanced thermal conductivity and decrease in viscosity, which at once make it possible to be use as nanolubricant in machining operation.

A FORECAST OF PRODUCTIVE LONGEVITY OF HOLSTEIN COWS BY INDIRECT SIGNS

2020 ◽  
Author(s):  
З.С. САНОВА
Keyword(s):  
Correlation Coefficient ◽  
Aging Process ◽  
Direct Relationship ◽  
Stability Index ◽  
Age At First Calving ◽  
Group I ◽  
Predicted Values ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

В статье представлены материалы о взаимосвязи продолжительности продуктивного использования коров с характеристикой устойчивости к деградации, с возрастом отела и удоем. В исследованной, разнородной по происхождению, группе животных для прогноза продуктивного периода коров, обусловленного устойчивостью к деградации и возрастом первого отела, пригодно уравнение регрессии, аргументами в котором являются индекс устойчивости, возраст первого отела в первой и второй степенях. Коэффициент корреляции межу предсказанными значениями продуктивного периода и его фактическими величинами в I группе составляет 0,502, во II - 0,604. При этом крайние варианты прогнозируются со статистическими ошибками 5 мес при оценке индекса устойчивости по 2 лактациям и 4,1 мес по 3, а средние варианты, соответственно, 1,6 и 1,51 мес. Индекс устойчивости к процессу старения является важной характеристикой биологических особенностей коров, определяющий их продуктивное долголетие. Его оценка по первым 2 и 3 лактациям имеет прямолинейную связь с продуктивным периодом (r=0,4109 и r=0,5270), соответственно. Зависимость продуктивного периода от возраста первого отела криволинейная — с увеличением возраста первого отела сокращается срок продуктивного использования, при возрасте первого отела более 1400 дней срок продуктивного использования колеблется от 1,33 до 1,41 лактации. Коэффициент корреляции между этими характеристиками коров составляет - 0,2164 в I и - 0,2620 во II группах. The article presents materials about the relationship of the duration of productive use of cows with the characteristic of resistance to degradation, with the age of calving and milk yield. In the studied group of animals, which is heterogeneous in origin, the regression equation is suitable for predicting the productive period of cows due to resistance to degradation and the age of the first calving, the arguments of which are the stability index, the age of the first calving in the first and second degrees. The correlation coefficient between the predicted values of the productive period and its actual values in group I is 0.502, in group II - 0.604. At the same time, the extreme variants are predicted with statistical errors of 5 months when evaluating the stability index for 2 lactations and 4.1 months for 3, and the average variants, respectively, are 1.6 and 1.51 months. The index of resistance to the aging process is an important characteristic of the biological characteristics of cows, which determines their productive longevity. Its estimate for the first 2 and 3 lactations has a direct relationship with the productive period (r=0.4109 and r=0.5270), respectively. The dependence of the productive period age at first calving curvilinear with increasing age at first calving reduces the time to productive use, while age at first calving of more than 1400 days, the period of productive use ranges from 1.33 to 1.41 lactation. The correlation coefficient between these characteristics of cows is-0.2164 in I and-0.2620 in II groups.

Substantiation the machine with a basket for the application of mineral fertilizers and other bulk materials with the upper arrangement of the feeding device

2019 ◽  
pp. 37-43
Author(s):  
Fesenko, H.
Keyword(s):  
Fat Body ◽  
Mineral Fertilizer ◽  
The Body ◽  
Mineral Fertilizers ◽  
Analytical Mechanics ◽  
Bulk Materials ◽  
The Stability ◽  
Working Bodies ◽  
The Relationship ◽  
Stable Flow

Purpose. Increasing the uniformity of distribution of mineral fertilizers and other bulk materials due to the stability of their feed from the body to the spreading working bodies using the top feeder. Methods. The following methods are used to achieve this aim: the method of comparing the differences between individual groups of fertilizers, the method of analyzing the properties of a new technical system, the method of functional inventiveness, and the methods of theoretical and analytical mechanics. Results. The traction body of the conveyor of the upper feed of the body fat body machine for mineral fertilizers and other bulk materials was substantiated and the relationship between the height of its scrapers and the distance between them was established, as well as the nature of the mineral fertilizer pressure on the curvilinear wall of the body. In addition, the design of the advanced body fertilizer spreader is justified, which ensures a stable flow of fertilizers from the body due to the improvement of the top feeder. Conclusions. Because of the conducted researches, the advantages of machines equipped with top feeder are found. They create the conditions for the forced feeding mineral fertilizers and other loose materials from the container to the distribution bodies, which is a prerequisite for their evenness on the surface. With this, the imperfection of known machines with the top feeder constrains their introduction into agricultural production. On this account, a more thoroughly constructed solution of the body feeder of the top feed is substantiated, in which the conveyor provides a stable supply of fertilizers from the body with reduced energy consumption during operation. Keywords: analysis, feed, upper device, conveyor, stability, fertilizers, flow ability, body.

FINANCIAL CRISES AND THE PUBLICATION OF THE FINANCIAL STATEMENTS OF BANKS IN SPAIN, 1844–1868

2004 ◽  
Vol 31 (2) ◽  
pp. 1-26 ◽  
Author(s):  
Mercedes Bernal Lloréns
Keyword(s):  
19Th Century ◽  
Financial Reporting ◽  
Economic Performance ◽  
Financial Crises ◽  
Limited Liability ◽  
Financial Statements ◽  
Early Response ◽  
Banking Regulations ◽  
The Stability ◽  
The Relationship

Financial crises have had a decisive influence on banking regulations in Spain. During the mid-19th century the publication of the financial statements of banks was considered key to the stability of the financial system. All new joint stock banking companies were to publish their statements in the Madrid Gazette in return for the privilege of limited liability. Similar obligations were placed on issuing banks. The copious publication of financial statements coincided with a period of financial prosperity. However, the crises that followed from 1864 to 1868 led to a reduction in the official publication of statements. This paper is concerned with an early response to crises in financial reporting. The study focuses on the relationship between the publication of accounting statements by banks and the GDP in Spain during the mid-19th century. The results suggest that the frequency of publication of financial statements may be an indicator of economic performance.

Parental Decision-Making for Surgery and Anesthesia in Young Children

2021 ◽  
pp. 019394592110216
Author(s):  
Audrey Rosenblatt ◽  
Michael Kremer ◽  
Olimpia Paun ◽  
Barbara Swanson ◽  
Rebekah Hamilton ◽  
...  
Keyword(s):  
Health Care ◽  
Decision Making ◽  
Young Children ◽  
Cognitive Processing ◽  
Emotional Processing ◽  
Theory Analysis ◽  
Parental Decision ◽  
Parental Decision Making ◽  
Health Care Context ◽  
The Relationship

Millions of young children undergo surgery and anesthesia each year, yet there is a lack of scientific consensus about the safety of anesthesia exposure for the developing brain. Also poorly understood is parental anesthesia-related decision-making and how neurotoxicity information influences their choices. The theoretical model of parental decision-making generated in this research explicates this process. Interviews with 24 mothers yielded a theoretical framework based on their narratives developed using a qualitative grounded theory analysis. Five major themes emerged from these interviews: emotional processing, cognitive processing, relationships as resources, the mother/child dyad, and the health care context. Mothers described a non-linear, iterative process; they moved fluidly through emotional and cognitive processing supported by relationships as resources and influenced by the health care context. A key element was the subtheme of the medical translator, an individual who provided context and information. The mother/child dyad grounded the model in the relationship with the child.

scholarly journals Cats in the forest: predicting habitat adaptations from humerus morphometry in extant and fossil Felidae (Carnivora)

Paleobiology ◽  
10.1666/12001 ◽  
2013 ◽  
Vol 39 (3) ◽  
pp. 323-344 ◽  
Author(s):  
Carlo Meloro ◽  
Sarah Elton ◽  
Julien Louys ◽  
Laura C. Bishop ◽  
Peter Ditchfield
Keyword(s):  
Morphological Variability ◽  
Olduvai Gorge ◽  
Environmental Predictors ◽  
Linear Measurements ◽  
Multivariate Statistical ◽  
Linear Discriminant ◽  
Related Group ◽  
Discriminant Analyses ◽  
The Stability ◽  
The Relationship

Mammalian carnivores are rarely incorporated in paleoenvironmental reconstructions, largely because of their rarity within the fossil record. However, multivariate statistical modeling can be successfully used to quantify specific anatomical features as environmental predictors. Here we explore morphological variability of the humerus in a closely related group of predators (Felidae) to investigate the relationship between morphometric descriptors and habitat categories. We analyze linear measurements of the humerus in three different morphometric combinations (log-transformed, size-free, and ratio), and explore four distinct ways of categorizing habitat adaptations. Open, Mixed, and Closed categories are defined according to criteria based on traditional descriptions of species, distributions, and biome occupancy. Extensive exploratory work is presented using linear discriminant analyses and several fossils are included to provide paleoecological reconstructions.We found no significant differences in the predictive power of distinct morphometric descriptors or habitat criteria, although sample splitting into small and large cat guilds greatly improves the stability of the models. Significant insights emerge for three long-canine cats:Smilodon populator,Paramachairodus orientalis, andDinofelissp. from Olduvai Gorge (East Africa).S. populatorandP. orientalisare both predicted to have been closed-habitat adapted taxa. The false “sabertooth”Dinofelissp. from Olduvai Gorge is predicted to be adapted to mixed habitat. The application of felid humerus ecomorphology to the carnivoran record of Olduvai Gorge shows that the older stratigraphic levels (Bed I, 1.99–1.79 Ma) included a broader range of environments than Beds II or V, where there is an abundance of cats adapted to open environments.

AN INTERACTIONAL APPROACH TO ATTRIBUTIONAL DIMENSIONS IN DYSPHORIA

1990 ◽  
Vol 18 (2) ◽  
pp. 267-277 ◽  
Author(s):  
Janet E. Eschen ◽  
David S. Glenwick
Keyword(s):  
Attributional Style ◽  
The Self ◽  
Regression Analyses ◽  
Self Blame ◽  
Attributional Style Questionnaire ◽  
Standard Manner ◽  
Stability Dimension ◽  
The Stability ◽  
The Relationship

To investigate the possible contributions to dysphoria of interactions among attributional dimensions, 105 freshmen and sophomores were administered the Attributional Style Questionnaire and the Beck Depression Inventory. Analyses examined the relationship to dysphoria of (a) the traditional composite score; (b) multiple regression analyses including interactions among the various dimensions; and (c) indices of behavioral self-blame, characterological self-blame, and external blame. The results provided modest support for the specific hypothesized interactional model and, to a large extent, appeared to support the validity of the standard manner in which dysphoric attributional style is viewed. Refinements of the traditional model are suggested, involving the self-blame construct, the possible role of the stability dimension, and the relationship between controllability and positive event attributions.

Some Relationship between Safety Factor of Earthquake Slope and Related Parameters

2011 ◽  
Vol 422 ◽  
pp. 688-692
Author(s):  
Xiao Hei He ◽  
Geng You Han ◽  
Rui Hua Xiao
Keyword(s):  
Numerical Simulation ◽  
Rock Mechanics ◽  
Safety Factor ◽  
Limit Equilibrium ◽  
Static Method ◽  
Acceleration Coefficient ◽  
The Wenchuan Earthquake ◽  
Stability Of Slope ◽  
The Stability ◽  
The Relationship

Abstract:Since the Wenchuan earthquake happened, the slope stability had been paid much more attention. The safety factor is an important parameter that can be used to evaluate the stability of slope. The pseudo-static method that based on limit equilibrium and the method of numerical simulation can calculate the safety factor accurately, but the velocity that gets the result is slow. If we can establish the relationship between safety factor and some other parameters, then we can calculate the safety factor by using the relationship more quickly. This paper establishes much relationship, such as the relationship between the rock mechanics parameters and the average danymic safety factor, the relationship between the rock mechanics parameters and the ratio of average danymic safety factor to static safety factor, the relationship between the rock mechanics parameters and the average earthquake acceleration coefficient, the relationship between the average earthquake acceleration coefficient and the ratio of average danymic safety factor to static safety factor, and the relationship between the earthquake acceleration coefficient and the ratio of danymic safety factor to static safety factor on the condition of different rock mass.

Sign in / Sign up

Export Citation Format

Share Document