Study on a New Cement for Deepwater Well Cementing

2012 ◽  
Vol 174-177 ◽  
pp. 1321-1325 ◽  
Author(s):  
Cheng Wen Wang ◽  
Zhi Gang Peng ◽  
Rui He Wang
Keyword(s):  
Low Temperature ◽  
Shallow Water ◽  
Gas Flow ◽  
Low Density ◽  
Test Results ◽  
Migration Control ◽  
Calcium Sulphoaluminate ◽  
Early Strength ◽  
Water Gas

In view of the new concerns in deepwater cementing, such as low temperature, shallow water/gas flow and so on, that can not be efficiently solved with conventional cement systems, a new SP-D cement with calcium sulphoaluminate and silicate was developed to adapt to deepwater low-temperature cementing. Test results show that the SP-D cement possesses high early-strength under low-temperature, favorable compatibility with conventional accelerators and retarders, and can be used to prepare the low density cement slurries combining with microsphere. The research offers a new SP-D cement for deepwater cementing with favorable high early-strength, improved migration control ability and minute expansion of set cement, and also shows prospective solution for the confronted problems in deepwater cementing.

Effects of Nano-CaCO3 on the Compressive Strength and Microstructure of High Strength Concrete in Different Curing Temperature

2011 ◽  
Vol 121-126 ◽  
pp. 126-131 ◽  
Author(s):  
Qing Lei Xu ◽  
Tao Meng ◽  
Miao Zhou Huang
Keyword(s):  
Compressive Strength ◽  
Low Temperature ◽  
High Strength Concrete ◽  
High Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Strength Concrete ◽  
Calcium Nitrite ◽  
Orientation Index ◽  
Early Strength

In this paper, effects of nano-CaCO3 on compressive strength and Microstructure of high strength concrete in standard curing temperature(21±1°C) and low curing temperature(6.5±1°C) was studied. In order to improve the early strength of the concrete in low temperature, the early strength agent calcium nitrite was added into. Test results indicated that 0.5% dosage of nano-CaCO3 could inhibit the effect of calcium nitrite as early strength agent, but 1% and 2% dosage of nano-CaCO3 could improve the strength of the concrete by 13% and 18% in standard curing temperature and by 17% and 14% in low curing temperature at the age of 3days. According to the XRD spectrum, with the dosage up to 1% to 2%, nano-CaCO3 can change the orientation index significantly, leading to the improvement of strength of concrete both in standard curing temperature and low curing temperature.

ЦИФРОВОЙ ИЗОЛЯТОР В СПЕЦИАЛИЗИРОВАННОМ КОРПУСЕ, ВЫПОЛНЕННОМ ПО ТЕХНОЛОГИИ LTCC

2020 ◽  
Vol 96 (3s) ◽  
pp. 392-395
Author(s):  
В.А. Бутузов ◽  
А.Е. Назаренко ◽  
Н.Ю. Дмитриев ◽  
В.А. Трофимов ◽  
В.А. Косевский ◽  
...  
Keyword(s):  
Low Temperature ◽  
Data Rate ◽  
Test Results ◽  
Made In

Представлены результаты разработки цифрового изолятора на основе интегрального микротрансформатора в специализированном корпусе, выполненном по технологии низкотемпературной совместно обжигаемой керамики (LTCC). Согласно результатам измерений тестовых образцов максимальная скорость передачи данных разработанного цифрового изолятора - не менее 30 Мбит/с. The paper presents the results of the development of a digital insulator based on an integral microtransformer in a specialized package made in technology of low-temperature co-fired ceramics. The isolator is a microassembly consisting of a transceiver chip and an integrated transformer. According to the test results, the maximum data rate speed of the developed digital insulator is not less than 30 Mbit/s.

scholarly journals Low Temperature Water-Gas Shift: Enhancing Stability through Optimizing Rb Loading on Pt/ZrO2

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 210
Author(s):  
Caleb Daniel Watson ◽  
Michela Martinelli ◽  
Donald Charles Cronauer ◽  
A. Jeremy Kropf ◽  
Gary Jacobs
Keyword(s):  
Low Temperature ◽  
Hydrogen Transfer ◽  
Water Gas Shift ◽  
Significant Shift ◽  
Catalyst Activation ◽  
X Ray ◽  
Temperature Programmed ◽  
Water Gas ◽  
X Ray Absorption ◽  
Temperature Water

Recent studies have shown that appropriate levels of alkali promotion can significantly improve the rate of low-temperature water gas shift (LT-WGS) on a range of catalysts. At sufficient loadings, the alkali metal can weaken the formate C–H bond and promote formate dehydrogenation, which is the proposed rate determining step in the formate associative mechanism. In a continuation of these studies, the effect of Rb promotion on Pt/ZrO2 is examined herein. Pt/ZrO2 catalysts were prepared with several different Rb loadings and characterized using temperature programmed reduction mass spectrometry (TPR-MS), temperature programmed desorption (TPD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), an X-ray absorption near edge spectroscopy (XANES) difference procedure, extended X-ray absorption fine structure spectroscopy (EXAFS) fitting, TPR-EXAFS/XANES, and reactor testing. At loadings of 2.79% Rb or higher, a significant shift was seen in the formate ν(CH) band. The results showed that a Rb loading of 4.65%, significantly improves the rate of formate decomposition in the presence of steam via weakening the formate C–H bond. However, excessive rubidium loading led to the increase in stability of a second intermediate, carbonate and inhibited hydrogen transfer reactions on Pt through surface blocking and accelerated agglomeration during catalyst activation. Optimal catalytic performance was achieved with loadings in the range of 0.55–0.93% Rb, where the catalyst maintained high activity and exhibited higher stability in comparison with the unpromoted catalyst.

scholarly journals Fast oxygen ion migration in Cu–In–oxide bulk and its utilization for effective CO2 conversion at lower temperature

2021 ◽  
Author(s):  
Jun-Ichiro Makiura ◽  
Takuma Higo ◽  
Yutaro Kurosawa ◽  
Kota Murakami ◽  
Shuhei Ogo ◽  
...  
Keyword(s):  
Low Temperature ◽  
Water Gas Shift ◽  
Chemical Looping ◽  
Co2 Conversion ◽  
Ion Migration ◽  
Oxygen Ion ◽  
Reverse Water Gas Shift ◽  
Oxygen Ion Migration ◽  
Lower Temperature ◽  
Water Gas

Efficient activation of CO2 at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures.

scholarly journals Low-Temperature Mechanical Properties of High-Density and Low-Density Polyethylene and Their Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1821
Author(s):  
Ildar I. Salakhov ◽  
Nadim M. Shaidullin ◽  
Anatoly E. Chalykh ◽  
Mikhail A. Matsko ◽  
Alexey V. Shapagin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Impact Strength ◽  
Relative Elongation ◽  
High Density ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Elongation At Break ◽  
Subzero Temperatures ◽  
Izod Impact

Low-temperature properties of high-density polyethylene (HDPE), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and their blends were studied. The analyzed low-temperature mechanical properties involve the deformation resistance and impact strength characteristics. HDPE is a bimodal ethylene/1-hexene copolymer; LDPE is a branched ethylene homopolymer containing short-chain branches of different length; LLDPE is a binary ethylene/1-butene copolymer and an ethylene/1-butene/1-hexene terpolymer. The samples of copolymers and their blends were studied by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), 13С NMR spectroscopy, and dynamic mechanical analysis (DMA) using testing machines equipped with a cryochamber. It is proposed that such parameters as “relative elongation at break at −45 °C” and “Izod impact strength at −40 °C” are used instead of the ductile-to-brittle transition temperature to assess frost resistance properties because these parameters are more sensitive to deformation and impact at subzero temperatures for HDPE. LLDPE is shown to exhibit higher relative elongation at break at −45 °C and Izod impact strength at −20 ÷ 60 °C compared to those of LDPE. LLDPE terpolymer added to HDPE (at a content ≥ 25 wt.%) simultaneously increases flow properties and improves tensile properties of the blend at −45 °C. Changes in low-temperature properties as a function of molecular weight, MWD, crystallinity, and branch content were determined for HDPE, LLDPE, and their blends. The DMA data prove the resulting dependences. The reported findings allow one to understand and predict mechanical properties in the HDPE–LLDPE systems at subzero temperatures.

scholarly journals Preparation, Characterization, and Activity of Pd/PSS-Modified Membranes in the Low Temperature Dry Reforming of Methane with and without Addition of Extra Steam

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 518
Author(s):  
Cecilia Mateos-Pedrero ◽  
Miguel A. Soria ◽  
Antonio Guerrero-Ruíz ◽  
Inmaculada Rodríguez-Ramos
Keyword(s):  
Low Temperature ◽  
Flow Reactor ◽  
Dry Reforming ◽  
Dry Reforming Of Methane ◽  
Porous Stainless Steel ◽  
Pd Membrane ◽  
Continuous Flow Reactor ◽  
Oxidation In Air ◽  
H2 Yield ◽  
Water Gas

The external surface of a commercial porous stainless steel (PSS) was modified by either oxidation in air at varying temperatures (600, 700, and 800 °C) or coating with different oxides (SiO2, Al2O3, and ZrO2). Among them, PSS-ZrO2 appears as the most suitable carrier for the synthesis of the Pd membrane. A composite Pd membrane supported on the PSS-ZrO2 substrate was prepared by the electroless plating deposition method. Supported Ru catalysts were first evaluated for the low-temperature methane dry reforming (DRM) reaction in a continuous flow reactor (CR). Ru/ZrO2-La2O3 catalyst was found to be active and stable, so it was used in a membrane reactor (MR), which enhances the methane conversions above the equilibrium values. The influence of adding H2O to the feed of DRM was investigated over a Ru/ZrO2-La2O3 catalyst in the MR. Activity results are compared with those measured in a CR. The addition of H2O into the feed favors other reactions such as Water-Gas Shift (RWGS) and Steam Reforming (SR), which occur together with DRM, resulting in a dramatic decrease of CO2 conversion and CO production, but a marked increase of H2 yield.

scholarly journals Impact of Graphene Oxide on Zero Shear Viscosity, Fatigue Life and Low-Temperature Properties of Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3073
Author(s):  
Abbas Mukhtar Adnan ◽  
Chaofeng Lü ◽  
Xue Luo ◽  
Jinchang Wang
Keyword(s):  
Graphene Oxide ◽  
Fatigue Life ◽  
Low Temperature ◽  
Shear Viscosity ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Zero Shear Viscosity ◽  
Modified Asphalt

This study has investigated the impact of graphene oxide (GO) in enhancing the performance properties of an asphalt binder. The control asphalt binder (60/70 PEN) was blended with GO in contents of 0%, 0.5%, 1%, 1.5%, 2%, and 2.5%. The permanent deformation behavior of the modified asphalt binders was evaluated based on the zero shear viscosity (ZSV) parameter through a steady shear test approach. Superpave fatigue test and the linear amplitude sweep (LAS) method were used to evaluate the fatigue behavior of the binders. A bending beam rheometer (BBR) test was conducted to evaluate the low-temperature cracking behavior. Furthermore, the storage stability of the binders was investigated using a separation test. The results of the ZSV test showed that GO considerably enhanced the steady shear viscosity and ZSV value, showing a significant contribution of the GO to the deformation resistance; moreover, GO modification changed the asphalt binder’s behavior from Newtonian to shear-thinning flow. A notable improvement in fatigue life was observed with the addition of GO to the binder based on the LAS test results and Superpave fatigue parameter. The BBR test results revealed that compared to the control asphalt, the GO-modified binders showed lower creep stiffness (S) and higher creep rate (m-value), indicating increased cracking resistance at low temperatures. Finally, the GO-modified asphalt binders exhibited good storage stability under high temperatures.

Sign in / Sign up

Export Citation Format

Share Document