Engineered Properties of Sustainable Cement-Based Composites Containing Recycled Rock Wool and Supplementary Cementitious Materials

2013 ◽  
Vol 284-287 ◽  
pp. 113-117 ◽  
Author(s):  
Wei Ting Lin ◽  
Ta Yuan Han ◽  
Yuan Chieh Wu ◽  
An Cheng ◽  
Ran Huang ◽  
...  
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Mineral Admixture ◽  
Supplementary Cementitious Materials ◽  
Test Results ◽  
Replacement Ratio ◽  
Supplementary Cementitious Material ◽  
The Difference ◽  
High Level ◽  
Rock Wool

This study investigates the properties of cement-based composites with addition of various recycled rock wools and compare with the properties of composites containing fly ash and ggbs. The use of recycled rock wool is with a cylindrical and fiber-shape particle less than 75 μm. Based on the chemical composition and particle size distribution, the material properties of recycled rock wool are similar to other pozzolanic materials such as fly ash and ggbs and can be use a supplementary cementitious material. The experimental results show that partially replacing cement with recycled rock wool improves the compressive strength and porestructure, but reduce the flow spread at the high level replacement. Therefore, the test results indicate that recycled rock wool is an effective mineral admixture, with 10 % to 30 % as suitable replacement ratio of cement for the difference water/cementitious ratios.

scholarly journals Influence of supplementary cementitious materials on hydration and microstructure development of concrete

2019 ◽  
Vol 1 (1) ◽  
pp. 43-44
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Cement Clinker ◽  
Hydration Kinetics ◽  
Supplementary Cementitious Material ◽  
Industrial Manufacturing ◽  
Portland Cement Clinker ◽  
By Products

Several supplementary cementitious materials (SCM) were blended with Portland cement clinker in order to produce more sustainable binders. The use of such materials, where no additional clinkering process is involved, leads to a significant reduction in CO2 emissions per ton of cementitious materials (grinding, mixing and transport of concrete and use very little energy compared to the clinkering process) and is a means to (re)utilize by-products of industrial manufacturing processes. Fly ash, for example, is the most commonly used supplementary cementitious material. The blending of Portland cement with fly ash results in the reduction of the total amount of portlandite in the hydrated mixture [1-4], somewhat less pronounced than for silica fume as: the reactivity of fly ash is very limited and as the CaO in the fly ash is an additional source of calcium [5]. Since fly ash particles are more spherical in shape than cement particles, workability and pumpability can be improved, by adding fly ash, also, fly ashes can cause low early strengthening. In this paper, the effects of Fly-ash as SCM’s on microstructure and hydration kinetics are studied.

scholarly journals Efficiency Concepts and Models that Evaluates the Strength of Concretes Containing Different Supplementary Cementitious Materials

2019 ◽  
Vol 5 (1) ◽  
pp. 18 ◽  
Author(s):  
Rahul Biswas ◽  
Baboo Rai
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Research Work ◽  
Cementitious Materials ◽  
Mineral Admixture ◽  
Supplementary Cementitious Materials ◽  
Hardened Concrete ◽  
Effective Utilization ◽  
Natural Pozzolans ◽  
Quantitative Understanding

The usage of Supplementary Cementitious Materials (SCM) is very much acknowledged due to the several improvements possible in the concrete composites, and because of the general economy. Research work till date suggests that utilization of SCMs enhance a significant number of the performance characteristics of the hardened concrete. The idea of efficiency can be utilized for comparing the relative performance of different pozzolans when incorporated into concrete. The efficiency concept, which was initially developed for fly ash, can be effortlessly connected to other advantageous s as well, such as silica fume, slag and natural pozzolans. A quantitative understanding of the efficiency of SCMs as a mineral admixture in concrete is essential for its effective utilization. The paper reviews the literature pertaining to the different efficiency concepts and models present to date that evaluates the strength of concretes containing different SCMs. This short survey demonstrates that there is a need for a superior comprehension of the SCMs in concrete for its powerful usage. Also, it is an effort directed towards a specific understanding of the efficiency of SCMs in concrete.

Durability of Sustainable Self-Consolidating Concrete

2018 ◽  
Vol 765 ◽  
pp. 285-289
Author(s):  
Osama Ahmed Mohamed ◽  
Waddah Al Hawat ◽  
Omar Fawwaz Najm
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Cementitious Materials ◽  
Chloride Penetration ◽  
Supplementary Cementitious Materials ◽  
Test Results ◽  
Self Consolidating Concrete ◽  
Human Footprint ◽  
Granulated Blast Furnace Slag

Supplementary cementitious materials such as fly ash, silica fume and ground granulated blast furnace slag (GGBS) have been used widely to partially replace cement in producing self-consolidating concrete (SCC). The production of cement is associated with emission of significant amounts of CO2 and increases the human footprint on the environment. Fly ash, silica fume, and GGBS are recycled industrial by-products that also impart favorable fresh and hardened properties on concrete. This study aims to assess the effect of the amounts of fly ash and silica fume on strength and chloride penetration resistance of concrete. Rapid Chloride Penetration Test (RCPT) was used to assess the ability of SCC to resist ingress of chlorides into concrete. SCC mixes with different dosages of fly ash and silica fume were developed and tested at different curing ages. Test results showed that replacing 20% of cement with fly ash produced the highest compressive strength of 67.96 MPa among all fly ash-cement binary mixes. Results also showed that replacing15% of cement with silica fume produced the highest compressive strength of 95.3 MPa among fly ash-cement binary mixes. Using fly ash and silica fume consistently increased the concrete resistance to chloride penetration at the early ages. Silica fume at all dosages results in low or very low levels of chloride penetration at all curing ages of concrete.

Tentative Optimum Proportion of Supplementary Cementitious Materials in Blended Cement to Perform Better under Tannery Wastewater

2018 ◽  
Vol 937 ◽  
pp. 107-113
Author(s):  
Samina Samrose ◽  
Saifa Anzum ◽  
Samira Mahmud ◽  
Tanvir Manzur
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Blended Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Effluent Treatment ◽  
Tannery Wastewater ◽  
Wastewater Sample ◽  
Supplementary Cementitious Material ◽  
Optimum Proportion

The present research studies the compressive strength of cement mortar cubes prepared from different proportions of supplementary cementitious materials (Fly Ash and Slag) in blended cement. This research aims to find the tentative optimum composition of supplementary cementitious material that shows better performance under tannery wastewater condition, such as that in effluent treatment plants. Synthetic tannery wastewater was simulated in laboratory after collecting wastewater sample from local tannery industry. Eight types of cement compositions (varying supplementary materials proportions) have been chosen. Compressive strength test has been conducted on mortar cubes over a period of three months. Test results revealed that slag addition had shown significantly stronger effects than that of fly ash addition. Also, the combined effect of fly ash and slag and their order of variation on strength were studied. The observations made from this research will be helpful for selection of blended cement proportions in future structures exposed to similar severe conditions.

scholarly journals Copper Slag Blended Cement: An Environmental Sustainable Approach for Cement Industry in India

2016 ◽  
Vol 11 (1) ◽  
pp. 186-196
Author(s):  
Jagmeet Singh ◽  
Jaspal Singh ◽  
Manpreet Kaur
Keyword(s):  
Blended Cement ◽  
Copper Slag ◽  
Cementitious Materials ◽  
Strength Test ◽  
Cementitious Material ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Material Strength ◽  
Test Results ◽  
Supplementary Cementitious Material

Indian cement industry is facing environmental issue of emission of carbon dioxide (CO2), a greenhouse gas. Blended cements including supplementary cementitious materials are substitute of Portland cement to reduce CO2 emission. The present paper investigates theappropriateness of copper slag (CS) as supplementary cementitious material. Strength properties and hydration of mixes were determined at different replacement levels of CS with cement. Compressive, flexural and tensile strength of each mix was found out at different curing periods. The hydration of cement was investigated through X-ray diffraction (XRD). The strength test results showed that substitution of up to 20% of CS can significantly replace Portland cement.XRD test results were corresponding to strength test results. The present study encourages the utilization of CS as supplementary cementitious material to make economical and environmentally sustainable blended cement

Compressive Strength and Chloride Ion Permeability Test of Concrete Incorporating Fly Ash and GGBS with Diverse Water Binder Ratio

2022 ◽  
Vol 1048 ◽  
pp. 311-320
Author(s):  
Tarun Gehlot ◽  
Suresh Singh Sankhla ◽  
Sangeeta Parihar
Keyword(s):  
Fly Ash ◽  
Compression Test ◽  
Chloride Ion ◽  
Cementitious Materials ◽  
Mineral Admixture ◽  
Supplementary Cementitious Materials ◽  
Permeability Test ◽  
Ion Permeability ◽  
Binder Ratio ◽  
Water Binder Ratio

In this study conventional concrete of M40 grade developed with diverse water binder ratio and fixed optimum dosage of 30% mineral admixture fly ash and GGBS with weight of cement .Compression test has been conducted on cube samples and Rapid Chloride permeability test (RCPT) are conducted on cylindrical specimens to acknowledge durability parameter. Compression test results has been enhanced with replacement of supplementary cementitious materials and chloride ion permeability has been reduced with substitution of fly ash and GGBS .incremental of water binder ratio also reduce the permeability value however compression value increased

Effect of ground granulated blast funrnace slag and fly ash on strength, permeability, and under-water abrasion of fine-grained concrete

2020 ◽  
Vol 71 (7) ◽  
pp. 775-788
Author(s):  
Quyet Truong Van ◽  
Sang Nguyen Thanh
Keyword(s):  
Fly Ash ◽  
Concrete Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Chloride Permeability ◽  
Cement Replacement ◽  
Fine Grained ◽  
Granulated Blast Furnace Slag ◽  
Compressive Strength Test ◽  
Economic Ground

The utilisation of supplementary cementitious materials (SCMs) is widespread in the concrete industry because of the performance benefits and economic. Ground granulated blast furnace slag (GGBFS) and fly ash (FA) have been used as the SCMs in concrete for reducing the weight of cement and improving durability properties. In this study, GGBFS at different cement replacement ratios of 0%, 20%, 40% and 60% by weight were used in fine-grained concrete. The ternary binders containing GGBFS and FA at cement replacement ratio of 60% by weight have also evaluated. Flexural and compressive strength test, rapid chloride permeability test and under-water abrasion test were performed. Experimental results show that the increase in concrete strength with GGBFS contents from 20% to 40% but at a higher period of maturity (56 days and more). The chloride permeability the under-water abrasion reduced with the increasing cement replacement by GGBFS or a combination of GGBFS and FA

scholarly journals Use of Treated Non-Ferrous Metallurgical Slags as Supplementary Cementitious Materials in Cementitious Mixtures

2021 ◽  
Vol 11 (9) ◽  
pp. 4028
Author(s):  
Asghar Gholizadeh Vayghan ◽  
Liesbeth Horckmans ◽  
Ruben Snellings ◽  
Arne Peys ◽  
Priscilla Teck ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Strength Development ◽  
Supplementary Cementitious Material ◽  
Performance Requirements ◽  
Metallurgical Slags ◽  
Leaching Behaviour ◽  
Kinetics Of

This research investigated the possibility of using metallurgical slags from the copper and lead industries as partial replacement for cement. The studied slags were fayalitic, having a mainly ferro-silicate composition with minor contents of Al2O3 and CaO. The slags were treated at 1200–1300 °C (to reduce the heavy metal content) and then granulated in water to promote the formation of reactive phases. A full hydration study was carried out to assess the kinetics of reactions, the phases formed during hydration, the reactivity of the slags and their strength activity as supplementary cementitious material (SCM). The batch-leaching behaviour of cementitious mixtures incorporating treated slags was also investigated. The results showed that all three slags have satisfactory leaching behaviour and similar performance in terms of reactivity and contribution to the strength development. All slags were found to have mediocre reactivity and contribution to strength, especially at early ages. Nonetheless, they passed the minimum mechanical performance requirements and were found to qualify for use in cement.

scholarly journals New Approach for the Determination of Radiological Parameters on Hardened Cement Pastes with Coal Fly Ash

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 475
Author(s):  
Ana María Moreno de los Reyes ◽  
José Antonio Suárez-Navarro ◽  
Maria del Mar Alonso ◽  
Catalina Gascó ◽  
Isabel Sobrados ◽  
...  
Keyword(s):  
Fly Ash ◽  
Activity Concentration ◽  
Gamma Ray ◽  
Coal Fly Ash ◽  
Cementitious Materials ◽  
New Method ◽  
Supplementary Cementitious Materials ◽  
Hardened Cement ◽  
Cement Pastes ◽  
Activity Concentrations

Supplementary cementitious materials (SCMs) in industrial waste and by-products are routinely used to mitigate the adverse environmental effects of, and lower the energy consumption associated with, ordinary Portland cement (OPC) manufacture. Many such SCMs, such as type F coal fly ash (FA), are naturally occurring radioactive materials (NORMs). 226Ra, 232Th and 40K radionuclide activity concentration, information needed to determine what is known as the gamma-ray activity concentration index (ACI), is normally collected from ground cement samples. The present study aims to validate a new method for calculating the ACI from measurements made on unground 5 cm cubic specimens. Mechanical, mineralogical and radiological characterisation of 28-day OPC + FA pastes (bearing up to 30 wt % FA) were characterised to determine their mechanical, mineralogical and radiological properties. The activity concentrations found for 226Ra, 212Pb, 232Th and 40K in hardened, intact 5 cm cubic specimens were also statistically equal to the theoretically calculated values and to the same materials when ground to a powder. These findings consequently validated the new method. The possibility of determining the activity concentrations needed to establish the ACI for cement-based materials on unground samples introduces a new field of radiological research on actual cement, mortar and concrete materials.

scholarly journals Long-term mechanical and shrinkage properties of cementitious grouts for structural repair

2019 ◽  
Vol 4 ◽  
pp. 9-15
Author(s):  
Md Shamsuddoha ◽  
Götz Hüsken ◽  
Wolfram Schmidt ◽  
Hans-Carsten Kühne ◽  
Matthias Baeßler
Keyword(s):  
Fly Ash ◽  
Flexural Strength ◽  
Cementitious Materials ◽  
Response Surfaces ◽  
Supplementary Cementitious Materials ◽  
Strength Development ◽  
Structural Repair ◽  
Positive Effects ◽  
Micro Silica

Grouts have numerous applications in construction industry such as joint sealing, structural repair, and connections in precast elements. They are particularly favoured in rehabilitation of structures due to penetrability and convenience of application. Grouts for repair applications typically require high-performance properties such as rapid strength development and superior shrinkage characteristics. Sometimes industrial by-products referred as supplementary cementitious materials (SCM) are used with neat cement due to their capabilities to provide binding properties at delayed stage. Micro silica, fly ash and metakaolin are such SCMs, those can modify and improve properties of cement products. This study aims at investigating long-term mass loss and linear shrinkage along with long-term compressive and flexural strength for grouts produced from ultrafine cement and SCMs. A series of mixtures were formulated to observe the effect of SCMs on these grout properties. Properties were determined after 365 days of curing at 23oC and 55% relative humidity. The effect of SCMs on the properties are characterised by statistical models. Response surfaces were constructed to quantify these properties in relation to SCMs replacement. The results suggested that shrinkage was reduced by metakaolin, while micro silica and fly ash had positive effects on compressive and flexural strength, respectively.

Sign in / Sign up

Export Citation Format

Share Document