Analysis on the Application of the Embedded System to Software Development

2013 ◽  
Vol 443 ◽  
pp. 531-534
Author(s):  
Fang Xu ◽  
Xiao Xia Peng

Along with the continuous development of computer technology, the embedded system, as one of the most important computer applications, has been more and more widely used in the world. In this paper, the embedded system is briefly introduced, and also the application of the embedded system to software development is analyzed and expounded.

2013 ◽  
Vol 462-463 ◽  
pp. 935-939
Author(s):  
Kan Hu ◽  
Yuan Lin Lei

With the rapid development of computer technology, embedded system is more and more widely used. The embedded hardware system was designed by taking Samsung ARM7TDMI CPU as the core. And a small uClinux system was embedded into this hardware system. Various kinds of applications in uClinux system can be developed. This thesis introduced one of those applications, which is embedded web server and its protocol-HTTP. In this thesis, the embedded system based on ARM had been developed. Our embedded system has the characters of low cost and high efficiency. It is at large applicated on business forwardly.


2012 ◽  
Vol 546-547 ◽  
pp. 1290-1295
Author(s):  
Rui Liu ◽  
Yue Ming Wang ◽  
Yan Zhang

In this paper, a comparison by several kinds of video surveillance technology, highlights the superiority of video monitoring system based on the embedded system. Video monitoring system is a collection of computer technology, the communication technology and digital video technology in an integrated system. Established a video monitoring system based on embedded technology, detailed analysis its system structure and gives its hardware and software design.


2013 ◽  
Vol 717 ◽  
pp. 568-572
Author(s):  
Xiao Bin Wang ◽  
Shou Jin Wang ◽  
Wei Shuang Yu ◽  
Qing Jun Wang

Smart Home is an emerging interdisciplinary subject, which has already enjoyed flourish development all over the world and has become the mainstream of the development of the construction industry in the 21st century. In this paper, through the design of smart home which mainly uses embedded microcontroller design, this vast world of smart home is introduced to everyone, so that they can pay more attention to smart home. Design the embedded system which takes ARM as the core through the model of host - subsystem, through RS485 bus management and control of the control terminal, and process, automatic control and regulation is conducted. The three subsystems of home security, appliance control, family MRs are also used to design home by use of embedded system. The design of smart home control system can make family life more comfortable and convenient, more economic and security, and take a firm step in order to meet the demands of people of safety, comfort, convenience as well as confirm to the green environmental protection.


Author(s):  
Alexey Syschikov ◽  
Yuriy Sheynin ◽  
Boris Sedov ◽  
Vera Ivanova

Nowadays embedded systems are used in a broad range of domains such as avionics, space, automotive, mobile, domestic appliances etc. Sophisticated software determines the quality of embedded systems and requires high-qualified experts for software development. Software becomes the main assert of embedded systems that is valuable to retain in changing computing platforms in embedded systems evolution. Computing platforms for embedded systems became multicore processors and SoC, they can change in the embedded system lifetime that could be long (dozen of years for an automobile and airplane). It requires software porting to new platforms as a regular process. Many tools and approaches allow developing of software for domain area experts, but mainly for general-purpose computing systems. In this paper the authors present the complex technology and tools that allows involving domain experts in software development for embedded systems. The proposed technology has various aspects and abilities that can be used to build verifiable and portable software for a wide range of embedded platforms.


2014 ◽  
Vol 624 ◽  
pp. 524-527
Author(s):  
Jin Huang

Model Driven Architecture (MDA) as a software independent of the specific platform and software suppliers architecture design and development methodology has been great concern. The system is expanding at the same time, in order to solve the high reliability of embedded software development code, real-time, and the resulting system efficiency of the implementation issues, the paper used in the field of embedded software development according to MDA, and achieved good results. And this research work is summarized and analyzed, pointing out the challenges facing the sector and future research work.


2013 ◽  
Vol 694-697 ◽  
pp. 2612-2615 ◽  
Author(s):  
Yan Ping Zhang ◽  
Li Min Liu

Embedded system is an important and popular application system for information technology. The applications of embedded system are depended on embedded hardware and software. In fact, applications of embedded systems have changed life of people in the world. They can be found anywhere, and almost can be used in every field. Since there are multiple definitions for the terminology, few people exactly know the concept of an embedded system. In this paper, some important concepts and definitions of embedded system are discussed and analyzed. The research is helpful to understand the embedded systems and apply them better.


2021 ◽  
Vol 11 (3) ◽  
pp. 1331
Author(s):  
Mohammad Hossein Same ◽  
Gabriel Gleeton ◽  
Gabriel Gandubert ◽  
Preslav Ivanov ◽  
Rene Jr Landry

By increasing the demand for radio frequency (RF) and access of hackers and spoofers to low price hardware and software defined radios (SDR), radio frequency interference (RFI) became a more frequent and serious problem. In order to increase the security of satellite communication (Satcom) and guarantee the quality of service (QoS) of end users, it is crucial to detect the RFI in the desired bandwidth and protect the receiver with a proper mitigation mechanism. Digital narrowband signals are so sensitive into the interference and because of their special power spectrum shape, it is hard to detect and eliminate the RFI from their bandwidth. Thus, a proper detector requires a high precision and smooth estimation of input signal power spectral density (PSD). By utilizing the presented power spectrum by the simplified Welch method, this article proposes a solid and effective algorithm that can find all necessary interference parameters in the frequency domain while targeting practical implantation for the embedded system with minimum complexity. The proposed detector can detect several multi narrowband interferences and estimate their center frequency, bandwidth, power, start, and end of each interference individually. To remove multiple interferences, a chain of several infinite impulse response (IIR) notch filters with multiplexers is proposed. To minimize damage to the original signal, the bandwidth of each notch is adjusted in a way that maximizes the received signal to noise ratio (SNR) by the receiver. Multiple carrier wave interferences (MCWI) is utilized as a jamming attack to the Digital Video Broadcasting-Satellite-Second Generation (DVB-S2) receiver and performance of a new detector and mitigation system is investigated and validated in both simulation and practical tests. Based on the obtained results, the proposed detector can detect a weak power interference down to −25 dB and track a hopping frequency interference with center frequency variation speed up to 3 kHz. Bit error ratio (BER) performance shows 3 dB improvement by utilizing new adaptive mitigation scenario compared to non-adaptive one. Finally, the protected DVB-S2 can receive the data with SNR close to the normal situation while it is under the attack of the MCWI jammer.


2020 ◽  
Vol 4 (4) ◽  
pp. 271-279
Author(s):  
Rui Guo

The intelligent recognition tool for bronze inscriptions of the Shang and Zhou dynasties—the “Shang Zhou Bronze Inscriptions Intelligent Mirror”—was successfully invented in Shanghai. This mirror, based on the computer technology of artificial intelligence (AI) image recognition and image retrieval, succeeds in automagical recognition of bronze inscriptions, both single letters and full texts. This research leads the trend of the AI recognition of Ancient Chinese characters and accumulates valuable experience for the development of inter-disciplinary research on Chinese character recognition. This essay emphasizes the importance of the bronze inscriptions of the Shang and Zhou dynasty database in the AI recognition of bronze inscriptions, introduces the functional components of this tool, and shares the whole research process in order to offer experience for the related research on AI recognition of other types of Ancient Chinese characters as well as ideographs in the world scope. “Shang Zhou Bronze Inscriptions Intelligent Mirror” as a tool for bronze inscription recognition also has room for improvement and support, and guidance from experts in similar areas is greatly welcomed.


Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 469
Author(s):  
Hyun Woo Oh ◽  
Ji Kwang Kim ◽  
Gwan Beom Hwang ◽  
Seung Eun Lee

Recently, advances in technology have enabled embedded systems to be adopted for a variety of applications. Some of these applications require real-time 2D graphics processing running on limited design specifications such as low power consumption and a small area. In order to satisfy such conditions, including a specific 2D graphics accelerator in the embedded system is an effective method. This method reduces the workload of the processor in the embedded system by exploiting the accelerator. The accelerator assists the system to perform 2D graphics processing in real-time. Therefore, a variety of applications that require 2D graphics processing can be implemented with an embedded processor. In this paper, we present a 2D graphics accelerator for tiny embedded systems. The accelerator includes an optimized line-drawing operation based on Bresenham’s algorithm. The optimized operation enables the accelerator to deal with various kinds of 2D graphics processing and to perform the line-drawing instead of the system processor. Moreover, the accelerator also distributes the workload of the processor core by removing the need for the core to access the frame buffer memory. We measure the performance of the accelerator by implementing the processor, including the accelerator, on a field-programmable gate array (FPGA), and ascertaining the possibility of realization by synthesizing using the 180 nm CMOS process.


Sign in / Sign up

Export Citation Format

Share Document