Study on Effect of Electronically Controlled EGR System on Diesel Engine Performance

2011 ◽  
Vol 80-81 ◽  
pp. 1128-1132
Author(s):  
Zhong Gen Su ◽  
Jiang Qi Long
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
High Load ◽  
Significant Decline ◽  
Specific Fuel Consumption ◽  
Emission Characteristics ◽  
Nox Emissions ◽  
Electronic Control ◽  
Test Engine

This paper designs an electronic control EGR system used in diesel engine and researches the influence of different EGR rate on engine economy and the emission characteristics of the 13- modes cycle. The results show that the specific fuel consumption of the test engine rises at different degrees after using electronically controlled EGR technology, especially in high load areas; NOx emissions have a more significant decline and particles increase to a certain extent; Overall, however, emissions of HC do not nearly change; CO emissions are closely related to EGR rate.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

Parameter optimization of a diesel engine to reduce noise, fuel consumption, and exhaust emissions using response surface methodology

2005 ◽  
Vol 219 (10) ◽  
pp. 1181-1192 ◽  
Author(s):  
Z Win ◽  
R P Gakkhar ◽  
S C Jain ◽  
M Bhattacharya
Keyword(s):  
Response Surface Methodology ◽  
Diesel Engine ◽  
Response Surface ◽  
Fuel Consumption ◽  
Parameter Optimization ◽  
Direct Injection ◽  
Engine Performance ◽  
Optimization Techniques ◽  
Injection Timing ◽  
Test Engine

The conflicting effects of the operating parameters and the injection parameter (injection timing) on engine performance and environmental pollution factors is studied in this paper. As an optimization objective, a 3.5 kW small direct injection diesel engine was used as the test engine, and its speed, load, and static injection timing were varied as per 4 × 4 × 3 full factorial design array. Radiated engine noise, smoke level, brake specific fuel consumption, and emissions of unburned hydrocarbons and nitrogen oxides were captured for all test runs. Objective functions relating input and output parameters were obtained using response surface methodology (RSM). Parameter optimization was carried out to control output responses under their mean limit using multi-objective goal programming and minimax programming optimization techniques.

Effects of Micro-Emulsion Fuels on the Performance and Emissions of Diesel Engine

2011 ◽  
Vol 236-238 ◽  
pp. 151-154 ◽  
Author(s):  
Jia Quan Wang ◽  
Ping Sun ◽  
Zhen Chen ◽  
De Qing Mei
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Performance And Emissions ◽  
Micro Emulsion ◽  
Effects Of Temperature ◽  
The Stability

The micro-emulsion fuels were prepared with complex surfactant, and the effects of temperature on the stability of these fuels were investigated. The engine performance and the emissions were studied when the engine was fueled with diesel and micro-emulsion diesel respectively. Results showed that when the engine was fueled with micro-emulsion diesel, the NOXand smoke emissions were decreased obviously and HC and CO emissions were increased slightly. Discounting of surfactant and water, the specific fuel consumption of micro-emulsion diesel was lower than those of diesel under any load at the speed of 2900r/min.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

scholarly journals Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Saiful Islam ◽  
Abu Saleh Ahmed ◽  
Aminul Islam ◽  
Sidek Abdul Aziz ◽  
Low Chyi Xian ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Smoke Emission ◽  
Suitable Alternative ◽  
Biodiesel Blend ◽  
And Performance ◽  
Emission And Performance

This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel) had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20) a suitable alternative fuel for diesel and could help in controlling air pollution.

scholarly journals PENGARUH TEKANAN POMPA BAHAN BAKAR TEKANAN TINGGI TERHADAP KINERJA MESIN

2018 ◽  
Vol 3 (2) ◽  
pp. 98-105
Author(s):  
Didit Sumardiyanto ◽  
Sri Endah Susilowati
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Injection Pump ◽  
Pump Pressure ◽  
Indicator Power

AbstrakPenelitian ini dilakukan untuk mengetahui  pengaruh  pompa injeksi bahan bakar tekanan tinggi terhadap kinerja sebuah mesin pada mesin penggerak utama MV. ALAM JAYA II yang menggunakan mesin diesel YANMAR type M22-EN. Berdasarkan data-data yang diperoleh dilapangan, setelah dilakukan pembahasan bahwa tekanan pompa injeksi berpengaruh pada kinerja mesin diesel. Untuk tekanan pompa injeksi sebesar 820 kgf/cm2, kinerja yang dihasilkan mesin adalah : Daya Indikator 1204 kgf/cm2, Daya Efektif 1016 kgf/cm2, Efisiensi Thermal Efektif 32,0% dan konsumsi bahan bakar spesifik sebesar 192 g/hp.h. Sedangkan setelah dilakukan perbaikan pompa injeksi, tekanan pompa menjadi 1120 kgf/cm2, kinerja yang dihasilkan oleh mesin adalah : Daya efektif 1399 hp, Daya Efektif 1195 hp, Efisiensi Thermal Efektif : 37.32%, dan Konsumsi Bahan Bakar Spesifik sebesar 165.7 g/hp.h Dengan adanya perbaikan pompa injeksi sehingga dapat menaikkan tekanan injeksi dari 880 kgf/cm2 menjadi 1120 kgf/cm2, maka kinerja mesin dapat ditingkatkan Kata kunci: mesin diesel,pompa injeksi, kinerja mesin AbstractThis research was conducted to determine the effect of high pressure fuel injection pump on the performance of a machine on the MV main drive engine. ALAM JAYA II which uses the YANMAR type M22-EN diesel engine. Based on the data obtained in the field, after discussion that the injection pump pressure affects the performance of the diesel engine. For injection pump pressure of 820 kgf /cm2, the engine performance is: Indicator Power 1204 kgf /cm2, Effective Power of 1016 kgf /cm2, Effective Thermal Efficiency of 32.0% and specific fuel consumption of 192 g / hp.h. Whereas after the injection pump repairs, the pump pressure becomes 1120 kgf / cm2, the performance produced by the engine is: Effective 1399 hp, Effective 1195 hp, Effective Thermal Efficiency: 37.32%, and Specific Fuel Consumption of 165.7 g / hp. H With the improvement of the injection pump so that it can increase the injection pressure from 880 kgf / cm2 to 1120 kgf /cm2, the engine performance can be improvedKeywords: diesel engine, injection pump, engine performance

Natural Gas Fueling of a Caterpillar 3406 Diesel Engine

1992 ◽  
Vol 114 (3) ◽  
pp. 459-465 ◽  
Author(s):  
G. E. Doughty ◽  
S. R. Bell ◽  
K. C. Midkiff
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
High Load ◽  
Emission Characteristics ◽  
Nox Emissions ◽  
Turbocharged Diesel Engine ◽  
Performance And Emission ◽  
Full Load ◽  
Load Power ◽  
High Speeds

A Caterpillar 3406 turbocharged diesel engine was converted to operate in a natural gas with diesel pilot ignition mode and was evaluated for performance and emission characteristics for both diesel and natural gas operation. Full-load power was achieved with natural gas fueling without knock. Similar fuel efficiencies were obtained with natural gas fueling at high loads, but efficiencies were lower for low loads. Bosch smoke numbers were reduced by over 50 percent with natural gas fueling for all cases investigated. NOx emissions were found to be lower at low loads and at high speeds under high load. CO emissions were significantly increased for natural gas fueling while CO2 concentrations in the exhaust were reduced for natural gas fueling.

scholarly journals The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil

2017 ◽  
Vol 6 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Tuan Anh Hoang ◽  
Vang Van Le
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Vegetable Oils ◽  
Thermal Efficiency ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Coconut Oil ◽  
Diesel Oil ◽  
Specific Fuel Consumption ◽  
Jatropha Oil

Fossil fuel crisis and depletion, environmental pollution and ever-increase in vehicle and transportation means have renewed the scientist’s interest in the world in order to look for potential alternative fuels, which are attractive such as biodiesel, bioethanol, DME and vegetable oils. Inedible vegetable oils such as coconut oil, Jatropha oil, linseed oil or animal fat are full of potential for using directly or manufacturing biodiesel. This work is carried out in order to study the four stroke diesel engine D240 performance characteristics fueled with preheated pure coconut oil (PCO), Jatropha oil methyl ester (JOME) and compare with diesel oil (DO). The test diesel engine performance such as power (Ne), torque (Me), specific fuel consumption (ge) and thermal efficiency (ηe) is determined, calculated and evaluated while using JOME, preheated PCO and compared to DO. The results show that, power (Ne), torque (Me) and thermal efficiency (ηe) while engine is fueled with JOME and PCO are lower, otherwise specific fuel consumption (ge) is higher than those of diesel fuel, the test engine performance are gained the best for JOME and PCO100.Article History: Received Dec 9, 2016; Received in revised form January 28, 2017; Accepted February 4, 2017; Available onlineHow to Cite This Article: Hoang, T.A and Le,V. V. (2017). The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil. International Journal of Renewable Energy Development, 6(1), 1-7.http://dx.doi.org/10.14710/ijred.6.1.1-7

scholarly journals Multiobjective Optimisation of a Marine Dual Fuel Engine Equipped with Exhaust Gas Recirculation and Air Bypass Systems

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5021
Author(s):  
Sokratis Stoumpos ◽  
Gerasimos Theotokatos
Keyword(s):  
Fuel Consumption ◽  
Engine Performance ◽  
Exhaust Gas Recirculation ◽  
Specific Fuel Consumption ◽  
Dual Fuel ◽  
Nox Emissions ◽  
Exhaust Gas ◽  
Brake Specific Fuel Consumption ◽  
Gas Recirculation ◽  
Optimisation Techniques

Dual fuel engines constitute a viable solution for enhancing the environmental sustainability of the shipping operations. Although these engines comply with the Tier III NOx emissions regulations when operating at the gas mode, additional measures are required to ensure such compliance at the diesel mode. Hence, this study aimed to optimise the settings of a marine four-stroke dual fuel (DF) engine equipped with exhaust gas recirculation (EGR) and air bypass (ABP) systems by employing simulation and optimisation techniques, so that the engine when operating at the diesel mode complies with the ‘Tier III’ requirements. A previous version of the engine thermodynamic model was extended to accommodate the EGR and ABP systems modelling. Subsequently, a combination of optimisation techniques including multiobjective genetic algorithms (MOGA) and design of experiments (DoE) parametric runs was employed to identify both the engine and the EGR/ABP systems settings with the objective to minimise the engine brake specific fuel consumption and reduce the NOx emissions below the Tier III limit. The derived simulation results were employed to analyse the EGR system involved interactions and their effects on the engine performance and emissions trade-offs. A sensitivity analysis was performed to reveal the interactions between considered engine settings and quantify their impact on the engine performance parameters. The derived results indicate that EGR rates up to 35% are required, so that the investigated engine with EGR and ABP systems, when operating at the diesel mode, achieves compliance with the ‘Tier III’ NOx emissions, whereas the associated engine brake specific fuel consumption penalty is up to 8.7%. This study demonstrates that the combination of EGR and ABP systems can constitute a functional solution for achieving compliance with the stringent regulatory requirements and provides a better understating of the underlined phenomena and interactions of the engine subsystems parameters variations for the investigated engine equipped with EGR and ABP systems.

Sign in / Sign up

Export Citation Format

Share Document