Modeling and Calculating Vibration Characteristic of Car Body Assembled and Manufactured in Vietnam

2019 ◽  
Vol 889 ◽  
pp. 315-321
Author(s):  
Thanh Cong Nguyen

In recently years, Automotive industry in Vietnam is a fast growing sector, mainly reliant on domestic produces, assembly and sales. There are some details of cars that have been modeled, calculated to research and fabricate. Body vibration of the vehicles is one of the criteria to evaluate quality in the process of manufacturing and assembling automobiles. There are so many factors affecting on vibration of vehicles, in that body structure is one of the main causes. Up to now, automobiles manufactured and assembled in Vietnam have not yet had specific evaluations and standards on vibration. Determination of characteristic body vibration is a main part to reduce sound and vibration. In this paper, the modelling and calculating the body’s characteristic vibration of cars manufactured, assembled in Vietnam was researched. The body structure is designed by 3D model using commercial Catia Software. The model was transformed from Catia software to Hypermesh software, using finite element method to simulate. The calculation results of 25 measurement characteristic vibrations whose frequency is in range of 22.77 Hz to 97.21 Hz. The results are shown that, characteristic vibration of state 1 and 2 significantly influence the noise of the body. This is also the basis for optimal analysis of the body structure to control the vibration and noise of automobiles.

Geophysics ◽  
1966 ◽  
Vol 31 (1) ◽  
pp. 74-96 ◽  
Author(s):  
B. K. Bhattacharyya

In this paper is presented a new method for determining the following parameters of a uniformly magnetized body of rectangular prismatic shape: (i) horizontal dimensions, (ii) depths to the top and bottom of the body, and (iii) intensity and direction of magnetization. Accuracy in the computation of these parameters is highly dependent on the correct location of the center and on the determination of the major and minor axes of the body. An iterative method of calculations is used. This method is considerably aided not only by the second vertical derivative map of the observed total field but also by the total field reduced to the pole and its second vertical derivative map. The horizontal dimensions are determined by noting the location of the maximum of the odd component of the second vertical derivative about the center of the body. These dimensions are estimated with high accuracy when they are greater than the depth to the top of the body. The remaining unknown parameters of the body are calculated with the help of the first horizontal and vertical derivatives and the total field at the origin in the plane of observation which is directly above the center of the body. The present method also requires the total‐field value at the point one‐half unit of length above the origin. The factors affecting the accuracy in the calculation of the parameters are discussed in detail. With the help of high‐speed digital computers, this method can be used with great advantage for computation of the above parameters of magnetized bodies giving rise to a number of anomalies over a particular area.


2018 ◽  
pp. 83-87
Author(s):  
E. S. Sukach ◽  
L. A. Budko

Objective: to study the parameters of body composition in young athletes engaged in cyclic sports. Material and methods. The differentiated parameters of body composition in young athletes have been revealed on the basis of the examination data of 60 cyclic athletes at the age of 13-15. The bioimpedance analyzer Medass AVS-01 was used for determination of the body composition parameters. Results. The performed bioimpedance analysis confirms specificity of the component body structure of young athletes engaged in cyclic sports. Conclusion. Thus the component body structure of the young athletes has been obtained by the results of the bioimpedance analysis. The majority of the body composition parameters of the examined athletes did not exceed the bounds of the normalized values. Statistically significant gender differences of the body composition features of young athletes doing cyclic sports have been found.


2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Cahtia Adelman ◽  
Michal Kaufmann Yehezkely ◽  
Shai Chordekar ◽  
Haim Sohmer

Hearing is elicited by applying the clinical bone vibrator to soft tissue sites on the head, neck, and thorax. Two mapping experiments were conducted in normal hearing subjects differing in body build: determination of thelowestsoft tissue stimulationsiteat which a 60 dB SL tone at 2.0 kHz was effective in eliciting auditory sensation and assessment of actualthresholdsalong the midline of the head, neck, and back. In males, a lower site for hearing on the back was strongly correlated with a leaner body build. A correlation was not found in females. In both groups, thresholds on the head were lower, and they were higher on the back, with a transition along the neck. This relation between the soft tissue stimulation site and hearing sensation is likely due to the different distribution of soft tissues in various parts of the body.


2021 ◽  
Vol 80 (2) ◽  
pp. 76-85
Author(s):  
A. N. Skachkov ◽  
S. L. Samoshkin ◽  
S. D. Korshunov ◽  
D. A. Nikiforov ◽  
D. A. Romashov

Investigations of the frequency of bending vibrations of the car bodies of 61-4440 model range, which includes compartment cars, staff cars, non-compartment cars, coach cars, restaurant cars and others, are described. The bodies of all cars of this model range have the same overall dimensions and are made of corrosionresistant steels (stainless) with flat corrugated sheathing of the lower (under the window) belt.To assess the influence of the design features of stainless steel bodies on its bending stiffness and the parameters of bending vibrations in the vertical plane, a computational and experimental complex of works was carried out.After analyzing the calculation results and experimental data, proposals were developed and implemented to increase the bending stiffness of the metal body structure with stainless steel skin. To check the implemented proposals, complex tests were carried out to determine the parameters of bending vibrations of the metal structure of the experimental body. The tests were carried out according to the combined method developed by the authors. For this, a vibrator, installed in the console parts of the body, and impulse excitation were used.The results of testing the metal structure of the experimental body in comparison with the results of testing the car bodies of 61-4440 model range showed the effectiveness of the implemented proposals, namely: increasing the frequency of the first tone of bending vibrations by 18 %; decrease in the amplitude of vertical vibrations of the body structure at the frequency of the first tone from 12 to 50 %; decrease in the amplitude of the vertical accelerations of the metal structure of the body during oscillations at the frequency of the first tone approximately by 2 times; significant reduction in horizontal acceleration in the area of the middle section walls. The effectiveness of the implemented proposals for increasing the bending stiffness of the metal structure of the experimental body allows recommending them for the entire model range of 61-4440 cars.


Author(s):  
T.B. Ball ◽  
W.M. Hess

It has been demonstrated that cross sections of bundles of hair can be effectively studied using image analysis. These studies can help to elucidate morphological differences of hair from one region of the body to another. The purpose of the present investigation was to use image analysis to determine whether morphological differences could be demonstrated between male and female human Caucasian terminal scalp hair.Hair samples were taken from the back of the head from 18 caucasoid males and 13 caucasoid females (Figs. 1-2). Bundles of 50 hairs were processed for cross-sectional examination and then analyzed using Prism Image Analysis software on a Macintosh llci computer. Twenty morphological parameters of size and shape were evaluated for each hair cross-section. The size parameters evaluated were area, convex area, perimeter, convex perimeter, length, breadth, fiber length, width, equivalent diameter, and inscribed radius. The shape parameters considered were formfactor, roundness, convexity, solidity, compactness, aspect ratio, elongation, curl, and fractal dimension.


2017 ◽  
Vol 1 (1) ◽  
pp. 115
Author(s):  
Sudar Kajin

Growth and development of the child have the nature of a thorough and intertwined relationships between components (health, nutrition, and environment). In general, child development can be grouped into three areas, namely cognitive, affective, and psychomotor, whereas biological growth which includes a change in the body structure. Body structure regarding the changes in bone structure, especially the long bones that have an impact on changes in body size, whereas changes in bodily functions is a result of hormonal changes that affect the physiological function .. The purpose of this development are: 1) Describe the product feasibility study التربية الجسمية for grade XI IPA at MAN I Mojokerto 2) Describe the development of learning tools using process skills can improve learning outcomes subjects التربية الجسمية class XI IPA at MAN I Mojokerto From the results of this development can be concluded: 1) results of expert validation and testing, the model approach process skills is fit for use for subjects of Physical Education, Sport and Health, because the products developed are not revised by experts but from the results of questionnaire of students stated that require revision are: (a) Improve the look model or change the learning strategy, and (b) improve the use of resources in implementing the model. 2) Product development learning tools using process skills can improve learning outcomes subjects التربية الجسمية class XI IPA at MAN I Mojokerto. From the class of the test increased learning completeness of Pre and Post Tests Tests are respectively 77.78% increase to 91.67%.


Author(s):  
Т.В. Никитина ◽  
А.А. Кашеварова ◽  
М.М. Гридина ◽  
А.А. Хабарова ◽  
А.Г. Мензоров ◽  
...  

Митотическая нестабильность кольцевых хромосом может приводить к появлению клеточных клонов с различной генетической структурой. В качестве модели нестабильности кольцевых хромосом в митозе мы использовали фибробласты от пациентов с r(8), r(13), r(18) и r(22) и полученные из них индуцированные плюрипотентные стволовые клетки (ИПСК). Линии ИПСК с r(22) имели относительно стабильный кариотип на протяжении десятков (до 60) пассажей и сохраняли неизменную структуру кольцевой хромосомы. Кариотип линий ИПСК с r(8) и r(18) на ранних пассажах стабильный, планируется его изучение на поздних пассажах. Наибольшее разнообразие кариотипа выявлено в линиях ИПСК с r(13), в которых наблюдали различные перестройки и выраженную клеточную гетерогенность. Определение факторов, влияющих на митотическую стабильность кольцевых хромосом, может иметь значение для консультирования пациентов. Mitotic instability of ring chromosomes can lead to the appearance of cell clones with different genetic structure. IPSCs from fibroblasts of patients with r(8), r(13), r(18), and r(22) were used as a model of ring chromosomes mitotic behavior. Karyotypes of iPSC lines with r(8) and r(18) have so far been evaluated only in the early passages, lines with r(22) have maintained a relatively stable karyotype up to 60 passages. The occurrence of rearrangements and cellular heterogeneity was found characteristic for r(13) iPSCs. The determination of factors affecting the ring chromosomes mitotic stability would be beneficial for the patient’s prognosis.


2017 ◽  
Vol 54 ◽  
pp. 112-119
Author(s):  
L. M. Khmelnychy

The estimation of the first-born cows of Ukrainian Black-and-White dairy breed by the exterior type in the leading breeding herds of Cherkassy region by the method of linear classification (n = 566) has been carried out. The results of the evaluated animals by the 100-score system indicate that within the group of traits, the average level of assessment is "good with the plus". The animals have been differed by the good development of group features characterizing the dairy type (82.4 score), body condition (83.5 score), limbs (82.8 score), udder (82.7 score) and overall score (82.8 score). The degree of development 18 descriptive traits of the exterior of cows, has been predicted by the method of linear classification, indicates their significant intraherd variability. Animals have the moderate height, deep body and angularity. The rump angle, the angle of hock joint and the teats length, according to the variability of scores in the range of 17.8–22.4%, have an average optimal development. The level of scores for the rear width (5.9 score), attachment of the fore (6.3 score) and the rear parts (6.0 score) of the udder testifies to their good development. The body structure of the cows-firstborn has a sufficient description of the type traits that determine their milk yield. At the present stage of selection and breeding work due to the use of bull-sires different origins and breeding value on the local population livestock with significant genotype diversity, the degree of influence each of the hereditary factors in the overall variability of linear features has a scientific and practical significance. In our studies, the force of influence conditional bloodiness of the Holstein mother's breed in the overall fraction of variability of linear type traits within the exterior complexes and the overall assessment takes a significant percentage - from 24.9 to 31.5 with a high degree of reliability according to Fischer's criterion. Among the descriptive traits, the proportion of influence the conditional bloodiness of mother, which is confirmed by high statistical confidence, ranges from 14.4 to 19.8%, and refers to the traits important for breeding. The level of coefficients of influence the father's breeding value in the total phenotypic variability for some of the linear traits is high and reliable. First of all it concerns group traits of the exterior, the development of which is determined by the pedigree value of father by 37.1–41.8%, and the overall assessment of type – by 46.6%. The coefficients of influence father's breeding value in most of the descriptive traits have high reliability (P < 0,001). The coefficients of the force of influence father, depending on the heredity of Holstein for the linear traits of almost the same level as his pedigree value. Since in this case the organized factor is purebreed Holstein and crossbreed bulls-sires of domestic selection, the positive role of Holstein heredity in improving the exterior type of cows has been traced realistically. The necessity of linear breeding, as an effective method in the system of dairy cattle breeding, has been substantiated by reliable values of the coefficients of the force of influence of father's line on the linear traits of offspring (3.4–29.5%). Despite the significant variability of coefficients of the force of influence on the linear traits, most of them have a high level of reliability within the evaluated body parts important for selection. The effect of cows belonging to the maternal line on the development of features of the body structure is insignificant and unreliable (5.3–9.2%). In the process of breeding aimed at improving cows of dairy herd by the exterior type, the pedigree value of parents has been assessed according to the method of linear classification of their daughters and their belonging to perspective genealogical formations.


Sign in / Sign up

Export Citation Format

Share Document