A METHOD FOR COMPUTING THE TOTAL MAGNETIZATION VECTOR AND THE DIMENSIONS OF A RECTANGULAR BLOCK‐SHAPED BODY FROM MAGNETIC ANOMALIES

Geophysics ◽  
1966 ◽  
Vol 31 (1) ◽  
pp. 74-96 ◽  
Author(s):  
B. K. Bhattacharyya
Keyword(s):  
High Speed ◽  
Magnetization Vector ◽  
The Body ◽  
Total Field ◽  
Unknown Parameters ◽  
Factors Affecting ◽  
Vertical Derivative ◽  
Correct Location ◽  
Unit Of Length

In this paper is presented a new method for determining the following parameters of a uniformly magnetized body of rectangular prismatic shape: (i) horizontal dimensions, (ii) depths to the top and bottom of the body, and (iii) intensity and direction of magnetization. Accuracy in the computation of these parameters is highly dependent on the correct location of the center and on the determination of the major and minor axes of the body. An iterative method of calculations is used. This method is considerably aided not only by the second vertical derivative map of the observed total field but also by the total field reduced to the pole and its second vertical derivative map. The horizontal dimensions are determined by noting the location of the maximum of the odd component of the second vertical derivative about the center of the body. These dimensions are estimated with high accuracy when they are greater than the depth to the top of the body. The remaining unknown parameters of the body are calculated with the help of the first horizontal and vertical derivatives and the total field at the origin in the plane of observation which is directly above the center of the body. The present method also requires the total‐field value at the point one‐half unit of length above the origin. The factors affecting the accuracy in the calculation of the parameters are discussed in detail. With the help of high‐speed digital computers, this method can be used with great advantage for computation of the above parameters of magnetized bodies giving rise to a number of anomalies over a particular area.

Reynolds-averaged Navier–Stokes simulation of hydrofoil effects on hydrodynamic coefficients of a catamaran in forced oscillation

2016 ◽  
Vol 231 (2) ◽  
pp. 364-383
Author(s):  
Amin Najafi ◽  
Mohammad Saeed Seif
Keyword(s):  
High Speed ◽  
Experimental Approach ◽  
Navier Stokes ◽  
Hydrodynamic Coefficients ◽  
Laboratory Equipment ◽  
Factors Affecting ◽  
High Frequencies ◽  
Frequency Independent ◽  
Reynolds Averaged Navier Stokes

Determination of high-speed crafts’ hydrodynamic coefficients will help to analyze the dynamics of these kinds of vessels and the factors affecting their dynamic stabilities. Also, it can be useful and effective in controlling the vessel instabilities. The main purpose of this study is to determine the coefficients of longitudinal motions of a planing catamaran with and without a hydrofoil using Reynolds-averaged Navier–Stokes method to evaluate the foil effects on them. Determination of hydrodynamic coefficients by experimental approach is costly and requires meticulous laboratory equipment; therefore, utilizing the numerical methods and developing a virtual laboratory seem highly efficient. In this study, the numerical results for hydrodynamic coefficients of a high-speed craft are verified against Troesch’s experimental results. In the following, after determination of hydrodynamic coefficients of a planing catamaran with and without foil, the foil effects on its hydrodynamic coefficients are evaluated. The results indicate that most of the coefficients are frequency-independent especially at high frequencies.

Factors affecting the accurate determination of cerebrovascular blood flow using high-speed droplet imaging

1998 ◽  
Author(s):  
Stephen Rudin ◽  
Afshin Divani ◽  
Ajay K. Wakhloo ◽  
Baruch B. Lieber ◽  
William Granger ◽  
...  
Keyword(s):  
Blood Flow ◽  
High Speed ◽  
Accurate Determination ◽  
Factors Affecting

Modeling and Calculating Vibration Characteristic of Car Body Assembled and Manufactured in Vietnam

2019 ◽  
Vol 889 ◽  
pp. 315-321
Author(s):  
Thanh Cong Nguyen
Keyword(s):  
The Body ◽  
Body Structure ◽  
Characteristic Vibration ◽  
Factors Affecting ◽  
Body Vibration ◽  
Optimal Analysis ◽  
Calculation Results ◽  
State 1 ◽  
Measurement Characteristic

In recently years, Automotive industry in Vietnam is a fast growing sector, mainly reliant on domestic produces, assembly and sales. There are some details of cars that have been modeled, calculated to research and fabricate. Body vibration of the vehicles is one of the criteria to evaluate quality in the process of manufacturing and assembling automobiles. There are so many factors affecting on vibration of vehicles, in that body structure is one of the main causes. Up to now, automobiles manufactured and assembled in Vietnam have not yet had specific evaluations and standards on vibration. Determination of characteristic body vibration is a main part to reduce sound and vibration. In this paper, the modelling and calculating the body’s characteristic vibration of cars manufactured, assembled in Vietnam was researched. The body structure is designed by 3D model using commercial Catia Software. The model was transformed from Catia software to Hypermesh software, using finite element method to simulate. The calculation results of 25 measurement characteristic vibrations whose frequency is in range of 22.77 Hz to 97.21 Hz. The results are shown that, characteristic vibration of state 1 and 2 significantly influence the noise of the body. This is also the basis for optimal analysis of the body structure to control the vibration and noise of automobiles.

scholarly journals Endurance product for sprinters

2021 ◽  
Vol 83 (1) ◽  
pp. 253-257
Author(s):  
A. N. Shcheglevatyh ◽  
S. A. Ovechkin
Keyword(s):  
High Speed ◽  
The Body ◽  
Control Group ◽  
Main Task ◽  
Nutritional Improvement ◽  
Sprint Running ◽  
Aerobic Process ◽  
Positive Effect ◽  
Experimental Group

Endurance in sprint running is determined by the runner's ability to maintain maximum high speed at a distance and resist its decline due to fatigue that occurs during running. At present, recommendations for the development of sprint endurance are mainly intended for athletes using various means and methods of sports training. The development of this quality in athletes with the use of nutritional improvement technology has mainly general recommendations. Thanks to the nitrate contained in beets, the body absorbs more oxygen and fatigue less during exercise, contributing to the aerobic process. The main task of our work was: to determine the indicators of endurance in sprint running (repeated running of 100 m segments 5-6 times with the determination of the average), and to substantiate the methodology for the development of this quality in athletes using the technology of taking probiotics. The experimental data made it possible to reveal the effectiveness of the applied methodology for the development of endurance in sprint running. Moreover, the greatest effect was achieved using the method of circular training, with the inclusion of the means of speed-strength training in combination with running, as well as repeated running of short and long segments (30-200 m), alternating in one lesson, with a gradual decrease in the rest intervals. The experimental group that took beet juice showed a higher endurance increase in an average of 0.5 seconds than the control group, which allows us to draw a conclusion about the importance of taking nitrate in beets and its positive effect on the endurance of sprinters.

Gender determination of caucasoid hair using image analysis

1993 ◽  
Vol 51 ◽  
pp. 216-217
Author(s):  
T.B. Ball ◽  
W.M. Hess
Keyword(s):  
Image Analysis ◽  
Cross Sections ◽  
Scalp Hair ◽  
The Body ◽  
Equivalent Diameter ◽  
Cross Sectional ◽  
Hair Samples ◽  
Length Width ◽  
Morphological Differences

It has been demonstrated that cross sections of bundles of hair can be effectively studied using image analysis. These studies can help to elucidate morphological differences of hair from one region of the body to another. The purpose of the present investigation was to use image analysis to determine whether morphological differences could be demonstrated between male and female human Caucasian terminal scalp hair.Hair samples were taken from the back of the head from 18 caucasoid males and 13 caucasoid females (Figs. 1-2). Bundles of 50 hairs were processed for cross-sectional examination and then analyzed using Prism Image Analysis software on a Macintosh llci computer. Twenty morphological parameters of size and shape were evaluated for each hair cross-section. The size parameters evaluated were area, convex area, perimeter, convex perimeter, length, breadth, fiber length, width, equivalent diameter, and inscribed radius. The shape parameters considered were formfactor, roundness, convexity, solidity, compactness, aspect ratio, elongation, curl, and fractal dimension.

Modeling of dynamic mosaicism on ring chromosomes in human fibroblasts and IPSCS

2020 ◽  
pp. 12-13
Author(s):  
Т.В. Никитина ◽  
А.А. Кашеварова ◽  
М.М. Гридина ◽  
А.А. Хабарова ◽  
А.Г. Мензоров ◽  
...  
Keyword(s):  
Genetic Structure ◽  
Human Fibroblasts ◽  
Cellular Heterogeneity ◽  
Mitotic Stability ◽  
Factors Affecting ◽  
Ring Chromosomes ◽  
Cell Clones ◽  
Mitotic Instability ◽  
Mitotic Behavior

Митотическая нестабильность кольцевых хромосом может приводить к появлению клеточных клонов с различной генетической структурой. В качестве модели нестабильности кольцевых хромосом в митозе мы использовали фибробласты от пациентов с r(8), r(13), r(18) и r(22) и полученные из них индуцированные плюрипотентные стволовые клетки (ИПСК). Линии ИПСК с r(22) имели относительно стабильный кариотип на протяжении десятков (до 60) пассажей и сохраняли неизменную структуру кольцевой хромосомы. Кариотип линий ИПСК с r(8) и r(18) на ранних пассажах стабильный, планируется его изучение на поздних пассажах. Наибольшее разнообразие кариотипа выявлено в линиях ИПСК с r(13), в которых наблюдали различные перестройки и выраженную клеточную гетерогенность. Определение факторов, влияющих на митотическую стабильность кольцевых хромосом, может иметь значение для консультирования пациентов. Mitotic instability of ring chromosomes can lead to the appearance of cell clones with different genetic structure. IPSCs from fibroblasts of patients with r(8), r(13), r(18), and r(22) were used as a model of ring chromosomes mitotic behavior. Karyotypes of iPSC lines with r(8) and r(18) have so far been evaluated only in the early passages, lines with r(22) have maintained a relatively stable karyotype up to 60 passages. The occurrence of rearrangements and cellular heterogeneity was found characteristic for r(13) iPSCs. The determination of factors affecting the ring chromosomes mitotic stability would be beneficial for the patient’s prognosis.

Determination of Lead Content in Red Colored Lipsticks from Mandalay Market by Flame Atomic Absorption Spectrophotometer

2018 ◽  
Vol 30 (3) ◽  
pp. 167-173
Keyword(s):  
Sampling Procedure ◽  
The Body ◽  
Lead Content ◽  
Social Psychological ◽  
Allowable Limit ◽  
Flame Atomic Absorption ◽  
Therapeutic Benefits ◽  
Flame Atomic Absorption Spectrophotometer ◽  
Exposure Levels

Red colored lipstick is the most widely used cosmetic product. Although lipstick gives a lot of social, psychological and therapeutic benefits, it may harm the consumers. Because some lipsticks contain a considerable amount of heavy metal especially lead. Lead is being used in lipstick mainly for the pigments required to obtain needed colors. Lead accumulates in the body over time and lead-containing lipstick applied several times a day, every day, combined with lead in water and other sources, could add up to significant exposure levels. Therefore, this study was aimed to determine lead content in red colored lipsticks from market. This study was laboratorybased, analytical study by using 25 lipstick samples. Red colored lipsticks were bought from Mandalay Market by random sampling procedure and they were completely coded to avoid the bias. Then, lead content in coded samples was determined by Flame AAS according to International Conference on Harmonization (ICH) guideline. Lead contents of 88% of the lipsticks samples were more than specified limit (20 ppm) of Food and Drug Administration, United States. All of them, lead content was highest in counterfeit lipsticks group. Among the tested lipstick samples, lipstick with lowest lead content was LE-RL 01 (15.74 ppm) and the lipstick with highest lead content was CF-RL 01(60.09 ppm). In conclusion, lead contents of red colored lipsticks (22 out of 25) from market samples were higher than allowable limit (20 ppm).

Fast Method for the Determination of Residual Solvents in Radiopharmaceutical Products

2017 ◽  
Vol 68 (4) ◽  
pp. 666-670 ◽  
Author(s):  
Mirela Mihon ◽  
Catalin Stelian Tuta ◽  
Alina Catrinel Ion ◽  
Dana Niculae ◽  
Vasile Lavric
Keyword(s):  
Gas Chromatography ◽  
Control Method ◽  
Limit Of Detection ◽  
The Body ◽  
Biologically Active ◽  
Injection Technique ◽  
Fast Method ◽  
Residual Solvent ◽  
Residual Solvents

The aim of this work was the development and validation of a fast analytical method to determine the residual solvents content in radiopharmaceuticals such as: 18F-Fluorodeoxyglucose (18F-FDG), 18F-Fluoroestradiol (18F-FES), 18F-Fluorothymidine (18F-FLT),18F-Fluoromisonidazole (18F-FMISO). Radiopharmaceuticals are radioactive preparations for medical purposes used in nuclear medicine as tracers in diagnostic imaging and treatment of certain diseases. Positron Emission Tomography (PET) is a medical imaging technique that consists in introducing into the body of a small amount of a biologically active chemical compound labelled with a short lived positron-emitting radioisotope (18F, 11C, 68Ga). Residual solvents are critical impurities in radiopharmaceuticals that can affect labelling, stability and physicochemical properties of drugs. Therefore, the determination of these solvents is essential for quality control of radiopharmaceuticals. Validation of the control method for residual solvents by gas chromatography is referred by the European Pharmacopoeia using a special injection technique (head space). The parameters of the method, which comply with International Conference on Harmonization guidelines, are: accuracy, precision, linearity, limit of detection, limit of quantification and robustness. The proposed method (direct gas chromatography injection) proved to be linear, precise, accurate and robust. Good linearity was achieved for all the solvents and correlation coefficients (R2) for each residual solvent were found more than 0.99.

Examination of Conditions for the Determination of Carbamate Pesticides in Soils

1992 ◽  
Vol 57 (8) ◽  
pp. 1632-1638 ◽  
Author(s):  
Věra Tatarkovičová ◽  
Zdeněk Stránský
Keyword(s):  
Activated Carbon ◽  
Solvent Extraction ◽  
Soil Type ◽  
Extraction Procedure ◽  
Purification Procedure ◽  
Factors Affecting ◽  
Carbamate Pesticides ◽  
Rp Hplc ◽  
Extracting Solvent

The procedure for the determination of carbamate pesticides in soil was optimized. The following factors affecting the final results were investigated: extracting solvent, extraction procedure, extract purification procedure, and soil type. Triple extraction with acetone and purification of the extract on a two-stage purification column containing an activated carbon-silica gel 1+1 mixture were found optimal. The extracts after treatment were analyzed by RP-HPLC with UV detection. The method developed allows carbamate pesticides in soil to be determined at concentrations in excess of 30 μg kg-1.

Sign in / Sign up

Export Citation Format

Share Document