Development of Mechanical Properties of Steel Fibers Reinforced High Strength Concrete

2014 ◽  
Vol 1077 ◽  
pp. 113-117 ◽  
Author(s):  
Filip Vogel ◽  
Ondřej Holčapek ◽  
Marcel Jogl ◽  
Karel Kolář ◽  
Petr Konvalinka
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Bulk Density ◽  
High Strength Concrete ◽  
High Strength ◽  
Time Development ◽  
Steel Fibers ◽  
Strength Concrete ◽  
Strength In Bending

This article deals with time development of basic mechanical properties of steel fibers reinforced high strength concrete (FRHSC). The basic mechanical properties were studied at different age of the fiber reinforced high strength concrete, exactly at the age 12, 15, 18 and 21 hours and 1, 2, 3, 7, 14, 21 and 28 days. The compressive strength was determined by using cubic specimens (100 x 100 x 100 mm). The tensile strength in bending and fragment compressive strength after bending were determined by prismatic specimens (40 x 40 x 160 mm). Bulk density were determined too. The comparison of mechanical properties of fibers reinforced high strength concrete and high strength concrete is in conclusion of this article.

Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)

2010 ◽  
Vol 34-35 ◽  
pp. 1441-1444 ◽  
Author(s):  
Ju Zhang ◽  
Chang Wang Yan ◽  
Jin Qing Jia
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Strength Concrete

This paper investigates the compressive strength and splitting tensile strength of ultra high strength concrete containing steel fiber. The steel fibers were added at the volume fractions of 0%, 0.5%, 0.75%, 1.0% and 1.5%. The compressive strength of the steel fiber reinforced ultra high strength concrete (SFRC) reached a maximum at 0.75% volume fraction, being a 15.5% improvement over the UHSC. The splitting tensile strength of the SFRC improved with increasing the volume fraction, achieving 91.9% improvements at 1.5% volume fraction. Strength models were established to predict the compressive and splitting tensile strengths of the SFRC. The models give predictions matching the measurements. Conclusions can be drawn that the marked brittleness with low tensile strength and strain capacities of ultra high strength concrete (UHSC) can be overcome by the addition of steel fibers.

Mechanical Properties of Steel Fibre-Reinforced High Strength Concrete with High early-Age Strength Used in Freezing Shaft Lining

2012 ◽  
Vol 174-177 ◽  
pp. 1388-1393
Author(s):  
Hai Qing Song ◽  
Teng Long Zheng
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
High Strength Concrete ◽  
Steel Fibre ◽  
High Strength ◽  
Plain Concrete ◽  
Split Tensile Strength ◽  
Strength Concrete

Plain concrete is susceptible to cracking under aggressive environment such as in freezing shaft. And addition of steel fibres in plain high strength concrete is proved to be effective in cracking resistance and brittleness improvement, etc. This paper presents results of experimental investigation carried out to study the mechanical properties of steel fibre-reinforced concrete having volume fractions of 0.38%, 0.51% and 0.64% for two types of fibres respectively. The results of this study revealed that there is an increase for all the mechanical properties such as compressive strength, split tensile strength, modulus of elasticity and flexural strength. Enhancement for split tensile strength and flexural strength is more evident than compressive strength.

scholarly journals Evaluation of Mix Proportions and Mechanical Properties of Normal and High-Strength Fibers Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 202-207
Author(s):  
Imad R. Mustafa ◽  
Omar Q. Aziz
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Strength Concrete

An experimental program is carried out to evaluate the mix design and mechanical properties of normal strength concrete (NSC) grade 40 MPa and high-strength concrete grade 60 and 80 MPa. The study investigates using silica fume to produce high-strength concrete grade 80 MPa and highlights the influence of adding steel fiber on the mechanical properties of normal and high-strength concrete. For NSC, the compressive strength is found at 7 and 28 days. While for higher strength concrete, the compressive strength is determined at 7, 28, and 56 days. The splitting tensile strength and flexural strength is determined at 28 days. Based on results, the specimens with 14% silica fume are higher compressive strength than the specimens with 10% silica fume by 21.8%. The presence of steel fiber increased the compressive strength of normal and high-strength concrete at 7, 28, and 56 days curing ages with different percentage and the steel fiber has an important role in increasing the splitting tensile strength and flexural strength of normal and high-strength concrete.

Influence of Nano Particles in the Flexural Behavior of High-Strength Reinforced Concrete Beams

2021 ◽  
Vol 1160 ◽  
pp. 25-43
Author(s):  
Naglaa Glal-Eldin Fahmy ◽  
Rasha El-Mashery ◽  
Rabiee Ali Sadeek ◽  
L.M. Abd El-Hafaz
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Reinforced Concrete Beams ◽  
Nano Particles ◽  
Flexural Behavior ◽  
Single Type ◽  
Strength Concrete ◽  
Flexural Ductility

High strength concrete (HSC) characterized by high compressive strength but lower ductility compared to normal strength concrete. This low ductility limits the benefit of using HSC in building safe structures. Nanomaterials have gained increased attention because of their improvement of mechanical properties of concrete. In this paper we present an experimental study of the flexural behavior of reinforced beams composed of high-strength concrete and nanomaterials. Eight simply supported rectangular beams were fabricated with identical geometries and reinforcements, and then tested under two third-point loads. The study investigated the concrete compressive strength (50 and 75 N/mm2) as a function of the type of nanomaterial (nanosilica, nanotitanium and nanosilica/nanotitanium hybrid) and the nanomaterial concentration (0%, 0.5% and 1.0%). The experimental results showed that nano particles can be very effective in improving compressive and tensile strength of HSC, nanotitanium is more effective than nanosilica in compressive strength. Also, binary usage of hybrid mixture (nanosilica + nanotitanium) had a remarkable improvement appearing in compressive and tensile strength than using the same percentage of single type of nanomaterials used separately. The reduction in flexural ductility due to the use of higher strength concrete can be compensated by adding nanomaterials. The percentage of concentration, concrete grade and the type of nanomaterials, could predominantly affect the flexural behavior of HSRC beams.

scholarly journals Effect of Locally Available Wheat Straw Ash in Developing High Strength Concrete

2021 ◽  
pp. 19-28
Author(s):  
Muhammad Armaghan Siffat ◽  
Muhammad Ishfaq ◽  
Afaq Ahmad ◽  
Khalil Ur Rehman ◽  
Fawad Ahmad
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Wheat Straw ◽  
High Strength Concrete ◽  
High Strength ◽  
Optimum Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Strength Concrete ◽  
Straw Ash

This study is supervised to assess the characteristics of the locally available wheat straw ash (WSA) to consume as a substitute to the cement and support in enhancing the mechanical properties of concrete. Initially, after incineration at optimum temperature of 800°C for 0.5, the ash of wheat straw was made up to the desirable level of fineness by passing through it to the several grinding cycles. Subsequently, the X-ray fluorescence (XRF) along with X-ray diffraction (XRD) testing conducted on ash of wheat straw for the evaluation its pozzolanic potential. Finally, the specimens of concrete were made by consuming 10% and 20% percentages of wheat straw ash as a replacement in concrete to conclude its impact on the compressive strength of high strength concrete. The cylinders of steel of dimensions 10cm diameter x 20cm depth were acquired to evaluate the compressive strength of high strength concrete. The relative outcomes of cylinders made of wheat straw ash substitution presented the slight increase in strength values of the concrete. Ultimately, the C-100 blends and WSA aided cement blends were inspected for the rheology of WSA through FTIR spectroscopy along with Thermogravimetric technique. The conclusions authenticate the WSA potential to replace cement in the manufacturing of the high strength concrete.

scholarly journals Effect of Steel Fiber Aspect Ratio on the Properties of High Strength Self Compacting Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 2938-2941
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Steel Fibers ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Strength Concrete ◽  
Fiber Aspect Ratio ◽  
Aspect Ratios ◽  
Hardened Properties

The High strength concrete defined as per IS 456 as the concrete having characteristic compressive strength more than 65 MPa. The self-compacting concrete has lot of advantages including concreting at congested reinforcement locations, better finish, good compaction etc. The inclusion of fibers in the concrete mix decreases the brittle nature of concrete thereby the ductility increases. Different types of fibers are available for inclusion in concrete like steel, glass, polypropylene, basalt, etc. In the present investigation, high strength concrete having characteristic strength of 90 MPa was developed and hooked ended steel fibers are used and the hardened properties are determined. Steel fibers having diameter of 1 mm and lengths of 25 and 50 mm were added to concrete in 0.125%, 0.25% and 0.5% by volume of concrete. Three hardened properties compressive strength, split tensile Strength and flexural strength were determined. Out of the two lengths of fiber i.e with two aspect ratios, the fiber with 50 mm length yielded better results.

scholarly journals IMPACT OF USING STONE POWDER AND MINERAL ADMIXTURES IN HIGH STRENGTH CONCRETE

2020 ◽  
Vol 4 (5) ◽  
pp. 82-87
Author(s):  
Afzal Basha Syed ◽  
Jayarami Reddy B ◽  
Sashidhar C
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Mineral Admixtures ◽  
Test Results ◽  
Concrete Technology ◽  
Split Tensile Strength ◽  
Conventional Concrete ◽  
Strength Concrete

In present era, high-strength concrete is progressively utilized in modern concrete technology and particularly in the construction of elevated structures. This examination has been directed to explore the properties of high-strength concrete that was delivered by using stone powder (SP) as an option of extent on sand after being processed. The aim of the research is to study the effect of replacement of sand with stone powder and substitution of cement with mineral admixtures (GGBS & Zeolite) on the mechanical properties of high strength concrete. The test results showed clear improvement in compression and split tensile nature of concrete by using stone powder and mineral admixtures together in concrete. The increment in the magnitude of compressive strength and split tensile strength are comparable with conventional concrete.

scholarly journals An Experimental Development on Properties of Concrete with GGBS in Addition with Alkaline Solution of Sodium Hydroxide and Sodium Silicate

2019 ◽  
Vol 8 (2) ◽  
pp. 5306-5310
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
Research Work ◽  
High Strength ◽  
Blast Furnaces ◽  
Experimental Development ◽  
Strength Concrete ◽  
Binding Material ◽  
Almost All

Becoming modern waste have discovered the need to transfer of mechanical waste, The waste that must be arranged would two be able to be spared to use in some way, among the two modern waste preparing cementatious nature substances can be supplanted as folio include number in cement to separated. Ground Granulated Blast Furnaces Slag (GGBS) which used to be squander from an iron assembling industry, which used to be utilized as substitute of bond in cement because of its characteristic solidifying properties. To increase the strength of the concrete some of the special cements are used. Due to various codal specifications the binding material replacements of GGBS have been restricted up to 80% in maximum. In this project replacement of GGBS is done by an amount of 10% ,20% ,30% and 40%. In accordance with above restrictions the replacement variations in binding material have been decoded in a high strength concrete mixture. The research work have been extensively executed in almost all areas of testing like compressive strength , spilt tensile strength, and flexural strength, and also various primary tests like specific gravity , granular gradation etc. have also been excited to achieve high strength concrete.

Sign in / Sign up

Export Citation Format

Share Document