A Novel Chelating Resin, Polystyrene-Supported Glucosamine: Preparation and Adsorption Properties for Ag(Ⅰ)

2011 ◽  
Vol 197-198 ◽  
pp. 478-482
Author(s):  
Hai Lan Huang ◽  
Guo Ming Wang ◽  
Rong Jun Qu ◽  
Xu Bo
Keyword(s):  
Adsorption Capacity ◽  
Considerable Change ◽  
Adsorption Properties ◽  
Langmuir Model ◽  
Chelating Resin ◽  
Isothermal Process ◽  
Adsorption Dynamics ◽  
Freundlich Model ◽  
Repeated Use ◽  
Adsorption Desorption

A novel chelating resin, crosslinking polystyrene-supported glucosamine (PS-GA), was prepared and its static adsorption properties for Ag(Ⅰ) were studied. The results indicated that this resin had excellent adsorption capacity for Ag(Ⅰ). The adsorption dynamics indicated that adsorption was controlled by the liquid film diffusion and the apparent activation energy Ea was 11.83 kJ/mol. Both Langmuir model and Freundlich model could describe the adsorption isothermal process of Ag(Ⅰ), and ∆G, ∆H, ∆S values were calculated. Increasing the temperature was beneficial to adsorption. The chelating resin can be easily regenerated by 2% thiourea in 0.1 mol/L HNO3 with higher effectiveness. Five adsorption–desorption cycles demonstrated that this resin was suitable for repeated use without considerable change in adsorption capacity.

scholarly journals Fabrication of Cellulose Nanocrystal-g-Poly(Acrylic Acid-Co-Acrylamide) Aerogels for Efficient Pb(II) Removal

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 333 ◽  
Author(s):  
Yifan Chen ◽  
Qian Li ◽  
Yujie Li ◽  
Qijun Zhang ◽  
Jingda Huang ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Adsorption Capacity ◽  
Langmuir Model ◽  
Cellulose Nanocrystal ◽  
Effective Removal ◽  
Pseudo Second Order ◽  
Repeated Use ◽  
Adsorption Desorption ◽  
Hydrolysis Of ◽  
Poly Acrylic Acid

In this work, cellulose nanocrystals (CNCs) obtained by the acid hydrolysis of waste bamboo powder were used to synthesize cellulose nanocrystal-g-poly(acrylic acid-co-acrylamide) (CNC-g-P(AA/AM)) aerogels via graft copolymerization followed by freeze-drying. The structure and morphology of the resulting aerogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), and the CNC-g-P(AA/AM) aerogels exhibited excellent absorbent properties and adsorption capacities. Subsequent Pb(II) adsorption studies showed that the kinetic data followed the pseudo-second-order equation, while the adsorption isotherms were best described using the Langmuir model. The maximum Pb(II) adsorption capacity calculated by the Langmuir model reached up to 366.3 mg/g, which is a capacity that outperformed that of the pure CNC aerogel. The CNC-g-P (AA/AM) aerogels become structurally stable through chemical cross-linking, which enabled them to be easily regenerated in HCl solution and retain the adsorption capacity after repeated use. The aerogels were found to maintain 81.3% removal efficiency after five consecutive adsorption–desorption cycles. Therefore, this study demonstrated an effective method for the fabrication of an aerogel adsorbent with an excellent reusability in the effective removal of Pb(II) from aqueous solutions.

scholarly journals Removal of Mercury(II) from Aqueous Solutions by Adsorption on Poly(1-amino-5-chloroanthraquinone) Nanofibrils: Equilibrium, Kinetics, and Mechanism Studies

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Shaojun Huang ◽  
Chengzhang Ma ◽  
Yaozu Liao ◽  
Chungang Min ◽  
Ping Du ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Repeated Use ◽  
Real Wastewater ◽  
Adsorption Desorption ◽  
Order Rate Equation

Poly(1-amino-5-chloroanthraquinone) (PACA) nanofibrils were applied as novel nanoadsorbents for highly toxic mercury removal from aqueous solutions. A series of batch adsorption experiments were conducted to study the effect of adsorbent dose, pH, contact time, and metal concentration on Hg(II) uptake by PACA nanofibrils. Kinetic data indicated that the adsorption process of PACA nanofibrils for Hg(II) achieved equilibrium within 2 h following a pseudo-second-order rate equation. The adsorption mechanism of PACA nanofibrils for Hg(II) was investigated by Fourier transform-infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) analyses. The adsorption isotherm of Hg(II) fitted well the Langmuir model, exhibiting superb adsorption capacity of 3.846 mmol of metal per gram of adsorbent. Lastly, we found out that the as-synthesized PACA nanofibrils are efficient in Hg(II) removal from real wastewater. Furthermore, five consecutive adsorption-desorption cycles demonstrated that the PACA nanofibrils were suitable for repeated use without considerable changes in the adsorption capacity.

scholarly journals Preparation of GO/MIL-101(Fe,Cu) composite and its adsorption mechanisms for phosphate in aqueous solution

2021 ◽  
Author(s):  
You Wu ◽  
Zuannian Liu ◽  
Bakhtari Mohammad Fahim ◽  
Junnan Luo
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Mechanism ◽  
Nitrogen Adsorption ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Adsorption Desorption

Abstract In this study, MIL-101(Fe), MIL-101(Fe,Cu), and Graphene Oxide (GO) /MIL-101(Fe,Cu) were synthesized to compose a novel sorbent. The adsorption properties of these three MOFs-based composites were compared toward the removal of phosphate. Furthermore, the influencing factors including reaction time, pH, temperature and initial concentration on the adsorption capacity of phosphate on these materials as well as the reusability of the material were discussed. The structure of fabricated materials and the removal mechanism of phosphate on the composite material were analyzed by Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analysis and zeta potential. The results show that the maximum adsorption capacity of phosphate by the composite GO/MIL-101(Fe,Cu)-2% was 204.60 mg·g− 1, which is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe). likewise the specific surface area of GO/MIL-101(Fe,Cu)-2% is 778.11 m2/g is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe),which are 747.75 and 510.66m2/g respectively. The adsorption mechanism of phosphate is electrostatic attraction, form coordination bonds and hydrogen bonds. The fabricated material is a promising adsorbent for the removal of phosphate with good reusability.

Purification of phloridzin from Lithocarpus polystachyus Rehd leaves using polymeric adsorbents functionalized with glucosamine and β-cyclodextrin

2014 ◽  
Vol 68 (11) ◽  
Author(s):  
Qian-Wen Wang ◽  
Jia-Jia Liu ◽  
Xiong Liu ◽  
Hong-Wei Zha ◽  
Na Ren
Keyword(s):  
Fourier Transform ◽  
Adsorption Capacity ◽  
Chromatographic Separation ◽  
Adsorption Properties ◽  
Purification Method ◽  
Freundlich Model ◽  
High Efficient ◽  
One Step ◽  
The Fourier Transform ◽  
Column Chromatographic

AbstractA high-efficient purification method of flavonoids from Lithocarpus polystachyus Rehd leaves is reported. Two adsorbents functionalized with glucosamine (GA) and β-cyclodextrin (β-CD) were synthesized and characterized by the Fourier transform infrared (FTIR) spectra. Also, adsorption properties and purification effect of flavonoids on different adsorbents were investigated. Two typical commercial adsorbents, AB-8 and D101, were employed as the reference materials. The adsorption capacity was enhanced remarkably by the introduction of GA and β-CD groups to the adsorbents. Moreover, the isotherms were well fitted by the Freundlich model. After a one-step column chromatographic separation, the purity of phloridzin increased significantly from 14.65 % to 79.48 % for PS-CD, to 66.56 % for PS-GA, 44.68 % for D101, and to 52.84 % for AB-8. This study provides a novel alternative matrix for the purification of phloridzin from Lithocarpus polystachyus Rehd leaves extracts.

scholarly journals Enhanced Removal of Soluble and Insoluble Dyes over Hierarchical Zeolites: Effect of Synthesis Condition

Inorganics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 52
Author(s):  
Ani Iryani ◽  
Ahmad Masudi ◽  
Ade I. Rozafia ◽  
Djoko Hartanto ◽  
Mardi Santoso ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Mechanism ◽  
Dye Adsorption ◽  
Nitrogen Adsorption ◽  
Langmuir Model ◽  
Order Kinetic ◽  
Hierarchical Zeolites ◽  
Hierarchical Zeolite ◽  
First Order ◽  
Adsorption Desorption

A hierarchical zeolite ZSM-5 with micro and meso-pore was prepared by optimising the most affecting parameter in sequence of desilication and dealumination. The physicochemical properties of zeolite were characterised with XRD, nitrogen adsorption–desorption, FTIR and SEM. The potential of this zeolite for decolorisation of CR, RY, MB, RhB, DB-1 and DB-14 was evaluated with adsorption isotherm, thermodynamics, kinetics, and influencing parameter for adsorption. The unique modification of ZSM-5 resulted in lower crystallinity, easier porosity control, rich terminal silanol and unbridged silanol groups which assisted in higher adsorption capacity. The adsorption capacity of the optimum ZSM-5 was 323, 435, 589, 625, 61 and 244 mg/g for CR, RY, MB, RhB, DB-1 and DB-14, respectively. The dye adsorption progressed through pseudo-first-order kinetic and close to the Langmuir model. The adsorption mechanism is proposed mainly through interaction between deprotonated silanol site and the electron-rich dye site.

scholarly journals Adsorption Properties of Waste Building Sludge for Environmental Protection

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 309
Author(s):  
Barbora Doušová ◽  
Eva Bedrnová ◽  
Pavel Reiterman ◽  
Martin Keppert ◽  
David Koloušek ◽  
...  
Keyword(s):  
Environmental Protection ◽  
Adsorption Capacity ◽  
Environmentally Friendly ◽  
Adsorption Properties ◽  
Langmuir Model ◽  
Adsorption Selectivity ◽  
Laboratory Temperature ◽  
Adsorption Affinity ◽  
Adsorption Data ◽  
Modified Forms

Waste building sludge (WBS) originating in the production of concrete prestressed poles (CSW) and technical stone (TSW) used in original and Fe-modified forms (CSWFe, TSWFe) was tested as an environmentally friendly and cheap sorbent of selected cations (Cd2+, Pb2+, Cs+) and anions (AsO43−, PO43−, CrO42−) from water. The experiments were performed with 0.1 and 0.5 mmol·L−1 model solutions in a batch manner at laboratory temperature. Adsorption data were fitted with the Langmuir model. The adsorption of cations (Pb2+ and Cd2+) ran almost quantitatively (>97%) on both CSW and TSW. Cesium (Cs+) adsorption on TSW reached 80%, while in the case of CSW, it was ineffective. The modification of CSW and TSW with FeII (CSWFe and TSWFe) improved their adsorption selectivity to anions by up to 70%. The adsorption of PO43− and AsO43− ran quantitatively (>98%) on modified CSWFe and TSWFe and also on initial CSW, while CrO42− was effectively adsorbed (≈80%) on TSWFe only. The adsorption affinity of tested ions in terms of adsorption capacity and sorbent consumption declined in order as follows: Pb2+ ≈ Cd2+ >> Cs+ for cations and AsO43− ≈ PO43− > CrO42− for anions.

scholarly journals Effect of Sodium Benzenesulfonate on SO42− Removal from Water by Polypyrrole-Modified Activated Carbon

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Feng Zhang ◽  
Dong-Sheng Wang ◽  
Fan Yang ◽  
Tian-Yu Li ◽  
Hong-Yan Li ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Granular Activated Carbon ◽  
Langmuir Model ◽  
Sulfate Adsorption ◽  
Modified Activated Carbon ◽  
Pseudo Second Order ◽  
Acidic Conditions ◽  
Adsorption Desorption ◽  
Desorption Cycle

Sodium benzenesulfonate was doped into polypyrrole-modified granular activated carbon (pyrrole-FeCl3·(6H2O)-sodium benzenesulfonate-granular activated carbon; PFB-GAC) with the goal of improving the modified GAC’s ability to adsorb sulfate from aqueous solutions. At a GAC dosage of 2.5 g and a pyrrole concentration of 1 mol L−1, the adsorption capacity of PFB-GAC prepared using a pyrrole:FeCl3·(6H2O):sodium benzenesulfonate ratio of 1000 : 1500 : 1 reached 23.05 mg g−1, which was eight times higher than that for GAC and two times higher than that for polypyrrole-modified GAC without sodium benzenesulfonate. Adsorption was favored under acidic conditions and high initial sulfate concentrations. Doping with sodium benzenesulfonate facilitated polymerization to give polypyrrole. Sodium benzenesulfonate introduced more imino groups to the polypyrrole coating, and the N+ sites improved ion exchange of Cl− and SO42− and increased the adsorption capacity of sulfate. Adsorption to the PFB-GAC followed pseudo-second-order kinetics. The adsorption isotherm conformed to the Langmuir model, and adsorption was exothermic. Regeneration using a weak alkali (NH3·H2O), which released OH− slowly, caused less damage to the polypyrrole than using a strong alkali (NaOH) as the regeneration reagent. NH3·H2O at a concentration of 12 mol L−1 (with the same OH− concentration as 2 mol L−1 NaOH) released 85% of the sorbed sulfate in the first adsorption-desorption cycle, and the adsorption capacity remained >6 mg g−1after five adsorption-desorption cycles.

scholarly journals Removal of Cd(II) from Aquatic System UsingOscillatoriasp. Biosorbent

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Seyed Naser Azizi ◽  
Abasalt Hosseinzadeh Colagar ◽  
Seyede Maryam Hafeziyan
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Biomass Concentration ◽  
Adsorption Properties ◽  
Langmuir Model ◽  
Ion Concentration ◽  
Solution Ph ◽  
Batch Mode ◽  
Freundlich Model ◽  
Biosorption Capacity

Biosorption of Cd(II) ions from aqueous solutions by native and driedOscillatoriasp. Cyanobacterium biomass was investigated in the batch mode. TheOscillatoriasp. was prepared from Molecular and Cell Laboratory of University of Mazandaran and grown in BG-11 medium. A comparison of Cd(II) adsorption properties of dried with nativeOscillatoriasp. biomass was made, the dried one showed a higher biosorption capacity and faster kinetic. The influence of solution pH, contact time, biomass concentration, initial metal ion concentration, and presence of coions using driedOscillatoriasp. biomass as well as pretreatment on the biosorption capacity of the biomass were studied. Various pretreatments ofOscillatoriasp. increased biosorption of Cd(II) at pH 7 in comparison with native biomass. However, heating at 100°C in a water bath showed significant improvement in Cd(II) biosorption capacity. The experimental biosorption data was well fitted to the Freundlich model compared to the Langmuir model, and the amount of Cd(II) removed from solution increased with increasing Cd(II) concentration. In addition, the dried biomass was investigated for Cd(II) removal from the simulated real sample containing about 14 mg/l Cd(II) at pH 7, under the same experimental condition.

scholarly journals Magnetic biochar combining adsorption and separation recycle for removal of chromium in aqueous solution

2016 ◽  
Vol 75 (5) ◽  
pp. 1177-1184 ◽  
Author(s):  
Ouyang Xin ◽  
Han Yitong ◽  
Cao Xi ◽  
Chen Jiawei
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Pyrolysis Temperature ◽  
Langmuir Model ◽  
Isothermal Adsorption ◽  
Magnetic Biochar ◽  
Fecl3 Solution ◽  
Peanut Hulls ◽  
Ft Ir ◽  
Adsorption Desorption

Biochar has been developed in recent years for the removal of contaminants such as Cr (VI) in water. The enhancement of the adsorption capacity of biochar and its recyclable use are still challenges. In this study, magnetic biochar derived from corncobs and peanut hulls was synthesized under different pyrolysis temperatures after pretreating the biomass with a low concentration of 0.5 M FeCl3 solution. The morphology, specific surface area, saturation magnetization and Fourier transform infrared spectroscopy (FT-IR) spectra were characterized for biochar. The magnetic biochar performed well in combining adsorption and separation recycle for the removal of Cr (VI) in water. The Cr (VI) adsorbance of the biochar was increased with the increase in pyrolysis temperature, and the magnetic biochar derived from corncobs showed better performance for both magnetization and removal of Cr (VI) than that from peanut hulls. The Langmuir model was used for the isothermal adsorption and the maximum Cr (VI) adsorption capacity of corncob magnetic biochar pyrolyzed at 650 °C reached 61.97 mg/g. An alkaline solution (0.1 M NaOH) favored the desorption of Cr (VI) from the magnetic biochar, and the removal of Cr (VI) still remained around 77.6% after four cycles of adsorption-desorption. The results showed that corncob derived magnetic biochar is a potentially efficient and recoverable adsorbent for remediation of heavy metals in water.

scholarly journals Biosorption of Lead, Mercury, and Cadmium Ions by Aspergillus terreus Immobilized in a Natural Matrix

2010 ◽  
Vol 59 (1) ◽  
pp. 37-44 ◽  
Author(s):  
YIH-MIN SUN ◽  
CHING-YI HORNG ◽  
FU-LIN CHANG ◽  
LI-CHUN CHENG ◽  
WEN-XUAN TIAN
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Fungal Biomass ◽  
Metal Uptake ◽  
Aspergillus Terreus ◽  
Significant Loss ◽  
Adsorption Selectivity ◽  
Freundlich Model ◽  
Biosorption Process ◽  
Repeated Use

Our aim was to investigate the biosorption of Pb2+, Hg2+, Cd2 from aqueous solution by Aspergillus terreus (both free and immobilized on loofa sponge discs). Our results show that the adsorption capacity of fungal biomass on loofa sponge (FBLS) is superior to free fungal biomass (FFB). The adsorption selectivity by FBLS was in the order Pb2+>Hg2+>Cd2+. The maximum metal ions adsorbed was 247.2, 37.7, 23.8 mg/g FBLS for Pb2+, Hg2+ and Cd2+, respectively. Metal uptake by FBLS was affected by the pH of the metal solution, but independent of temperature (10-50 degrees C). The Langmuir model was more suitable than the Freundlich model to describe the biosorption process of FBLS. The regenerated FBLS was found to be effective for repeated use for five cycles without significant loss in adsorption capacity. This research demonstrates that FBLS possesses excellent capacity for Pb2+ biosorption from aqueous solution and industrial wastewaters.

Sign in / Sign up

Export Citation Format

Share Document