Study on Self-Reinforcement of High-Density Polyethylene Extruded with Vibration in Low Temperature

2011 ◽  
Vol 337 ◽  
pp. 368-371
Author(s):  
Xue Mei Qin ◽  
Bao Shan Shi ◽  
Bing Li
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
High Density Polyethylene ◽  
Crystal Morphology ◽  
High Density ◽  
Axial Vibration ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron Microcopy

The effect of vibration on the microstructure and mechanical properties of high-density polyethylene (HDPE) sheets, obtained through vibration plasticating extruder in low temperature, were studied systematically. Property Tests show that the tensile strength and the Vika temperature were much improved under the reciprocating axial vibration in low temperature. Differential scanning calorimetry , scanning electron microcopy and wide angle X-ray diffraction were executed to analyze the microstructure of the samples. The results indicate that the vibration extrudate in low temperature has higher crystallinity, perfect crystallite, and new crystal morphology formed , which account for enhancement of the mechanical properties and Vika temperature of sheets, compared to conventional static extrudate.

Measurement and Analysis on Tensile Strength and Crystallinity of Vibrating Extruded High-Density Polyethylene (HDPE) Sheet

2011 ◽  
Vol 291-294 ◽  
pp. 561-564
Author(s):  
Bao Shan Shi ◽  
Xue Mei Qin ◽  
Bing Li
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Low Temperature ◽  
High Density Polyethylene ◽  
High Density ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Scanning Electron Microcopy ◽  
Measurement And Analysis ◽  
Result Show

By the apparatus of differential scanning calorimetry (DSC), scanning electron microcopy (SEM) and wide angle X-ray diffraction (WAXD), The effect of vibration on the microstructure and mechanical properties of high-density polyethylene (HDPE) sheets, obtained through vibration plasticating extruder in low temperature, were measured and analysed. The result show that the tensile strength was much improved under the reciprocating axial vibration in low temperature. The phenomenon indicate that the vibration extrudate in low temperature has higher crystallinity, perfect crystallite, and strong inter-spherulite ties, which account for enhancement of the mechanical properties of sheets, compared to conventional static extrusion.

scholarly journals Structures and mechanical properties of talc and carbon black reinforced high density polyethylene composites : Effects of organic and inorganic fillers

2013 ◽  
Vol 37 (1) ◽  
pp. 11-20 ◽  
Author(s):  
Nasrin Parvin ◽  
Md Samir Ullah ◽  
Md Forhad Mina ◽  
Md Abdul Gafur
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
High Density Polyethylene ◽  
Filler Content ◽  
High Density ◽  
Inorganic Filler ◽  
X Ray Diffraction ◽  
Compression Moulding ◽  
X Ray ◽  
Academy Of Sciences

Organic filler like carbon black (CB) and inorganic filler like talc (T) with 0, 0.5, 1.0, 10, 20 and 40 wt% were separately loaded in high density polyethylene (HDPE) by the extrusion moulding method at 160oC. Then, different sets of filler loaded HDPE composites were prepared using the compression moulding technique, and their structures and mechanical properties were characterized. The pure HDPE sample, as examined by the X-ray diffraction (XRD) technique, showed orthorhombic structure, which did not change either with filler types or with their concentration. The only variations found in the structure are the changes of crystallinity and crystallized size that depend on both types of fillers and their concentrations. Incorporation of CB in HDPE emphasizes the crystallinity and crystallized size more than that of T. The tensile strength of the composite decreases with the increase of both types of fillers, and this decrease is explained on the basis of Nielson model, which basically describes a poor interaction between filler and HDPE matrix. An increase of Young’s modulus of 350% is observed with the increasing CB and T contents, representing an increase of the stiffness in the materials. Flexural strength increased with the increase of CB content but decreased with the increase of talc content. Although the microhardness was observed to increase with both types of fillers, the hardness value was 80% higher for CB loaded-composites than that of T at 40 wt% filler content. These findings strongly indicate that the compatibility of HDPE is better with organic filler than with inorganic one. DOI: http://dx.doi.org/10.3329/jbas.v37i1.15675 Journal of Bangladesh Academy of Sciences, Vol. 37, No. 1, 11-20, 2013

Measurement and Analysis on Dynamics Cold Crystallization Parameter of High-Density Polyethylene (HDPE) Sheet by Vibration Force Field

2011 ◽  
Vol 103 ◽  
pp. 447-451
Author(s):  
Bing Li ◽  
Xue Mei Qin ◽  
Bao Shan Shi
Keyword(s):  
Molecular Weight ◽  
Low Temperature ◽  
Crystalline Structure ◽  
High Density Polyethylene ◽  
Crystalline Polymer ◽  
High Density ◽  
Polymer Materials ◽  
Heat Of Fusion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry

Physics mechanics properties of polymer materials don’t only depend on their chemical constitution, molecular weight and distribution of molecular weight, but also depend on their agglomerate configuration. The effect of vibration on the microstructure and mechanical properties of high-density polyethylene (HDPE) sheets, obtained through vibration plasticating extruder in low temperature, were studied systematically. Crystalline polymer is analyzed by differential scanning calorimetry(DSC), wide angle X ray diffraction(WAXD). The test result which represents parameters of crystalline structure is helped to judge the outside factors for crystalline structure, such as melting point, crystallinity and heat of fusion by DSC and crystallinity, crystal plane distance and grain size by WAXD, and canning electron microcopy (SEM). The results indicate that the vibration extrudate in low temperature has higher crystallinity, perfect crystallite, and strong inter-spherulite ties.

scholarly journals Structure and Mechanical Properties of High-Density Polyethylene Composites Reinforced with Glassy Carbon

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4024
Author(s):  
Piotr Olesik ◽  
Marcin Godzierz ◽  
Mateusz Kozioł ◽  
Jakub Jała ◽  
Urszula Szeluga ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Glassy Carbon ◽  
High Density Polyethylene ◽  
Mechanical Performance ◽  
High Density ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Carbon Fillers ◽  
Composite Samples

In this paper, we investigated theimpact of glassy carbon (GC) reinforcement oncrystal structure and the mechanical performance of high-density polyethylene (HDPE). We made composite samples by mixing HDPE granules with powder in ethanol followed bymelt mixing in a laboratory extruder. Along with the investigated composite, we also prepared samples with carbon nanotubes (CNT), graphene (GNP) and graphite (Gr) to compare GC impact with already used carbon fillers. To evaluate crystal structure and crystallinity, we used X-ray diffraction (XRD) and differential scanning calorimetry (DSC). We supported the XRD results with a residual stress analysis (RSA) according to the EN15305 standard. Analysis showed that reinforcing with GC leads to significant crystallite size reduction and low residual stress values. We evaluated the mechanical properties of composites with hardness and tensile testing. The addition of glassy carbon results inincreased mechanical strength incomposites with CNT and GNP.

scholarly journals Crystalline Characteristics and Their Influence in the Mechanical Performance in Poly(ε-Caprolactone) / High Density Polyethylene Blends

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1874
Author(s):  
Enrique Blázquez-Blázquez ◽  
Ernesto Pérez ◽  
Vicente Lorenzo ◽  
María L. Cerrada
Keyword(s):  
Differential Scanning Calorimetry ◽  
High Density Polyethylene ◽  
Mechanical Performance ◽  
Thermal Characterization ◽  
High Density ◽  
Mechanical Behaviors ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Polyethylene Blends

Blends of poly(ε-caprolactone) (PCL) and high-density polyethylene (HDPE) have been prepared at different compositions in order to assess the effect of HDPE on gas transport and mechanical behaviors of PCL. Previous to this evaluation, a complete morphological, structural, and thermal characterization were performed using techniques, including SEM, contact angle, FTIR, differential scanning calorimetry, and X-ray diffraction with synchrotron radiation at small and wide angles. Low HDPE incorporations allow interactions to be established at interfaces in the amorphous regions and the enhancement of the mechanical performance. Consequently, the addition of a small amount of HDPE (ranging from 5 to 10 wt%) appears to be appropriate in certain bio-applications where a higher mechanical behavior is required.

scholarly journals Effects of Sintering Temperature on Densification, Microstructure and Mechanical Properties of Al-Based Alloy by High-Velocity Compaction

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 218
Author(s):  
Xianjie Yuan ◽  
Xuanhui Qu ◽  
Haiqing Yin ◽  
Zaiqiang Feng ◽  
Mingqi Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Velocity ◽  
Sintered Density ◽  
Sintering Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
High Velocity Compaction ◽  
Sintered Temperature

This present work investigates the effects of sintering temperature on densification, mechanical properties and microstructure of Al-based alloy pressed by high-velocity compaction. The green samples were heated under the flow of high pure (99.99 wt%) N2. The heating rate was 4 °C/min before 315 °C. For reducing the residual stress, the samples were isothermally held for one h. Then, the specimens were respectively heated at the rate of 10 °C/min to the temperature between 540 °C and 700 °C, held for one h, and then furnace-cooled to the room temperature. Results indicate that when the sintered temperature was 640 °C, both the sintered density and mechanical properties was optimum. Differential Scanning Calorimetry, X-ray diffraction of sintered samples, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, and Transmission Electron Microscope were used to analyse the microstructure and phases.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

Tuning the Mechanical Properties of High-Density Polyethylene by ECAE Process

2015 ◽  
Author(s):  
Catalin Fetecau ◽  
Felicia Stan ◽  
Laurentiu Sandu ◽  
Florin Susac
Keyword(s):  
Mechanical Properties ◽  
High Density Polyethylene ◽  
Equal Channel Angular Extrusion ◽  
Morphological Changes ◽  
Longitudinal Axis ◽  
High Density ◽  
Scanning Calorimetry ◽  
Plastic Deformations ◽  
The Third ◽  
Indentation Tests

This paper investigates the ability of the equal channel angular extrusion (ECAE) process to induce morphological changes and hence tune the mechanical properties of high-density polyethylene (HDPE). In this study, differential scanning calorimetry (DSC), compression and cylindrical macro-indentation tests have been used to investigate the evolution of the mechanical properties of HDPE processed by ECAE up to four passes via route BC, i.e. counter clockwise 90° billet rotation about its longitudinal axis. It was found that the ECAE process induces significant plastic deformations with changes in the crystalline structure. The ECAE process increased the HDPE crystallinity by 10 to 15%. The number of ECAE passes has a significant effect on the magnitude of the mechanical properties especially on the elastic modulus and yield stress. Young’s modulus and yield strength decreased with increasing the number of ECAE passes and reached a stationary state after the third pass.

Effects of Cooling Rate and Sn Addition on the Microstructure of Ti-Nb-Sn Alloys

2011 ◽  
Vol 172-174 ◽  
pp. 190-195 ◽  
Author(s):  
Giorgia T. Aleixo ◽  
Eder S.N. Lopes ◽  
Rodrigo Contieri ◽  
Alessandra Cremasco ◽  
Conrado Ramos Moreira Afonso ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cooling Rate ◽  
Melting Furnace ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Β Phase ◽  
Arc Melting ◽  
Ti Alloys ◽  
Ω Phase

Ti-based alloys present unique properties and hence, are employed in several industrial segments. Among Ti alloys, β type alloys form one of the most versatile classes of materials in relation to processing, microstructure and mechanical properties. It is well known that heat treatment of Ti alloys plays an important role in determining their microstructure and mechanical behavior. The aim of this work is to analyze microstructure and phases formed during cooling of β Ti-Nb-Sn alloy through different cooling rates. Initially, samples of Ti-Nb-Sn system were prepared through arc melting furnace. After, they were subjected to continuous cooling experiments to evaluate conditions for obtaining metastable phases. Microstructure analysis, differential scanning calorimetry and X-ray diffraction were performed in order to evaluate phase transformations. Depending on the cooling rate and composition, α” martensite, ω phase and β phase were obtained. Elastic modulus has been found to decrease as the amount of Sn was increased.

Sign in / Sign up

Export Citation Format

Share Document