Numerical Study on Effect of Hydrogen Peroxide Additive on Ethanol HCCI Engine

2012 ◽  
Vol 433-440 ◽  
pp. 244-250 ◽  
Author(s):  
Tian Li ◽  
Jun Deng ◽  
Tang Tang Bao ◽  
Zhi Jun Wu
Keyword(s):  
Hydrogen Peroxide ◽  
Numerical Study ◽  
Engine Performance ◽  
Chemical Mechanism ◽  
No Production ◽  
Cylinder Pressure ◽  
Ethanol Mixture ◽  
Hcci Engine ◽  
Engine Model ◽  
Production Mechanisms

In this article, based on a combined chemical mechanism with detailed ethanol oxidization and NO production mechanisms, a single cylinder ethanol HCCI engine model was established using the software CHEMKIN. Comparing with experimental data, this model can well predict cylinder pressure and NO emission. By changing mole fraction of hydrogen peroxide in initial ethanol mixture at different conditions, the effect of hydrogen peroxide additive on ethanol HCCI engine performance was investigated. The results show that hydrogen peroxide can effectively improve cylinder pressure and advance heat release progress, without notably increasing NO production.

A Comprehensive Study on Natural Gas HCCI Engine Response to Different Initial Conditions via a Thermo-Kinetic Engine Model

2009 ◽  
Author(s):  
Omid Jahanian ◽  
Seyed Ali Jazayeri
Keyword(s):  
Natural Gas ◽  
Initial Conditions ◽  
Chemical Species ◽  
Engine Performance ◽  
Operating Conditions ◽  
Zone Model ◽  
Operating Characteristics ◽  
Hcci Engine ◽  
Engine Model ◽  
Homogenous Charge Compression Ignition

Homogenous Charge Compression Ignition (HCCI) combustion is a promising concept to reduce engine emissions and fuel consumption. In this paper, a thermo-kinetic model is developed to study the operating characteristics of a natural gas HCCI engine. The zero-dimensional single zone model consist detail chemical kinetics of natural gas oxidation including 325 reactions with 53 chemical species, and is validated with experimental results of reference works for two different engines, Volvo TD 100 and Caterpillar 3500, in 5 operating conditions. Then, the influence of parameters such as manifold temperature/pressure and equivalence ratio on in-cylinder temperature/pressure trends and start of combustion is studied. Measurements for Volvo engine show that SOC occurs 3–5 CAD earlier with every 15K increase in initial temperature. These whole results are explained in detail to describe the engine performance thoroughly.

An Experimental and Numerical Study of a Hydrogen Fueled, Directly Injected, Heavy Duty Engine at Knock-Limited Conditions

2020 ◽  
Author(s):  
Joel Mortimer ◽  
Stephen Yoannidis ◽  
Farzad Poursadegh ◽  
Zhewen Lu ◽  
Michael Brear ◽  
...  
Keyword(s):  
High Efficiency ◽  
Numerical Study ◽  
Engine Performance ◽  
Cylinder Pressure ◽  
Heavy Duty ◽  
Ignition Timing ◽  
High Compression Ratio ◽  
Combustion Modeling ◽  
Wide Range ◽  
The Impact

Abstract This paper presents an experimental and numerical study of a directly injected, spark-ignited (DI SI), heavy duty hydrogen fueled engine at knock-limited conditions. The impact of air-fuel ratio and ignition timing on engine performance is first investigated experimentally. Two-zone combustion modeling of the hydrogen fueled cylinder is then used to infer burn profiles and unburned, end-gas conditions using the measured in-cylinder pressure traces. Simulation of the autoignition chemistry in this end-gas is then undertaken to identify key parameters that are likely to impact knock-limited behavior. The experiments demonstrate knock-limited performance on this high compression ratio engine over a wide range of air-fuel ratios, λ. Other trends with λ are qualitatively similar to those shown in previous studies of hydrogen fueled engines. Kinetic simulations then suggest that some plausible combination of residual nitric oxide from previous cycles and locally high charge temperatures at intake valve closing can lead to autoignition at the knock-limited conditions identified in the experiments. This prompts a parametric study that shows how increased λ makes hydrogen less likely to autoignite, and suggests options for the design of high efficiency, directly injected, hydrogen fueled engines.

scholarly journals On the Turbulence-Chemistry Interaction of an HCCI Combustion Engine

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5876
Author(s):  
Marco D’Amato ◽  
Annarita Viggiano ◽  
Vinicio Magi
Keyword(s):  
Combustion Chamber ◽  
Numerical Study ◽  
Combustion Process ◽  
Operating Conditions ◽  
Chemical Mechanism ◽  
Model Parameters ◽  
Time Duration ◽  
Hcci Engine ◽  
Hcci Combustion ◽  
Engine Combustion

A numerical study was carried out to evaluate the influence of engine combustion chamber geometry and operating conditions on the performance and emissions of a homogeneous charge compression ignition (HCCI) engine. Combustion in an HCCI engine is a very complex phenomenon that is influenced by several factors that need to be controlled, such as gas temperature, heat transfer, turbulence and auto-ignition of the gas mixture. An eddy dissipation concept (EDC) combustion model was used to take into account the interaction between turbulence and chemistry. The model assumed that reactions occur in small turbulent structures called fine-scales, whose characteristic lengths and times depend mainly on the turbulence level. The model parameters were slightly modified with respect to the standard model proposed by Magnussen, to correctly simulate the characteristics of the HCCI combustion process. A reduced iso-octane chemical mechanism with 186 species and 914 chemical reactions was employed together with a sub-mechanism for NOx. The model was validated by comparing the results with available experimental data in terms of pressure and instantaneous heat release rate. Two engine chamber geometries with and without a cavity in the piston were considered, respectively. The two engines provided significant differences in terms of fluid-dynamic patterns and turbulence intensity levels in the combustion chamber. The results show that combustion started earlier and proceeded faster for the flat piston, leading to an increase in both the peak pressure and gross indicated mean effective pressure, as well as a reduction of CO and UHC emissions. An additional analysis was performed by considering a case without swirl for the flat-piston case. Such an analysis shows that the swirl motion reduces the time duration of combustion and slightly increases the gross indicated work per cycle.

scholarly journals Engine Malfunctioning Conditions Identification through Instantaneous Crankshaft Torque Measurement Analysis

2021 ◽  
Vol 11 (8) ◽  
pp. 3522
Author(s):  
Konstantinos-Marios Tsitsilonis ◽  
Gerasimos Theotokatos
Keyword(s):  
Operating Conditions ◽  
Cylinder Pressure ◽  
Dynamics Model ◽  
Engine Model ◽  
Measurement Analysis ◽  
Start Of Injection ◽  
Rate Of Heat Release ◽  
Relationship Of ◽  
Diagnostic Measurement ◽  
The Relationship

In this study a coupled thermodynamics and crankshaft dynamics model of a large two-stroke diesel engine was utilised, to map the relationship of the engine Instantaneous Crankshaft Torque (ICT) with the following frequently occurring malfunctioning conditions: (a) change in Start of Injection (SOI), (b) change in Rate of Heat Release (RHR), (c) change in scavenge air pressure, and (d) blowby. This was performed using frequency analysis on the engine ICT, which was obtained through a series of parametric runs of the coupled engine model, under the various malfunctioning and healthy operating conditions. This process demonstrated that engine ICT can be successfully utilised to identify the distinct effects of malfunctions (c) or (d), as they occur individually in any cylinder. Furthermore by using the same process, malfunctions (a) and (b) can be identified as they occur individually for any cylinder, however there is no distinct effect on the engine ICT among these malfunctions, since their effect on the in-cylinder pressure is similar. As a result, this study demonstrates the usefulness of the engine ICT as a non-intrusive diagnostic measurement, as well as the benefits of malfunctioning conditions mapping, which allows for quick and less resource intensive identification of engine malfunctions.

scholarly journals Axial Compressor Mean-Line Analysis: Choking Modelling and Fully-Coupled Integration in Engine Performance Simulations

2021 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Ioannis Kolias ◽  
Alexios Alexiou ◽  
Nikolaos Aretakis ◽  
Konstantinos Mathioudakis
Keyword(s):  
Axial Compressor ◽  
Engine Performance ◽  
Engine Model ◽  
Multi Stage ◽  
Transient Simulations ◽  
Full Knowledge ◽  
Compressor Performance ◽  
First Time ◽  
Performance Calculation ◽  
Fully Coupled

A mean-line compressor performance calculation method is presented that covers the entire operating range, including the choked region of the map. It can be directly integrated into overall engine performance models, as it is developed in the same simulation environment. The code materializing the model can inherit the same interfaces, fluid models, and solvers, as the engine cycle model, allowing consistent, transparent, and robust simulations. In order to deal with convergence problems when the compressor operates close to or within the choked operation region, an approach to model choking conditions at blade row and overall compressor level is proposed. The choked portion of the compressor characteristics map is thus numerically established, allowing full knowledge and handling of inter-stage flow conditions. Such choking modelling capabilities are illustrated, for the first time in the open literature, for the case of multi-stage compressors. Integration capabilities of the 1D code within an overall engine model are demonstrated through steady state and transient simulations of a contemporary turbofan layout. Advantages offered by this approach are discussed, while comparison of using alternative approaches for representing compressor performance in overall engine models is discussed.

scholarly journals A Comparison of Ethanol, Methanol, and Butanol Blending with Gasoline and Its Effect on Engine Performance and Emissions Using Engine Simulation

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1322
Author(s):  
Simeon Iliev
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Engine Simulation ◽  
Engine Model ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Blended Fuels

Air pollution, especially in large cities around the world, is associated with serious problems both with people’s health and the environment. Over the past few years, there has been a particularly intensive demand for alternatives to fossil fuels, because when they are burned, substances that pollute the environment are released. In addition to the smoke from fuels burned for heating and harmful emissions that industrial installations release, the exhaust emissions of vehicles create a large share of the fossil fuel pollution. Alternative fuels, known as non-conventional and advanced fuels, are derived from resources other than fossil fuels. Because alcoholic fuels have several physical and propellant properties similar to those of gasoline, they can be considered as one of the alternative fuels. Alcoholic fuels or alcohol-blended fuels may be used in gasoline engines to reduce exhaust emissions. This study aimed to develop a gasoline engine model to predict the influence of different types of alcohol-blended fuels on performance and emissions. For the purpose of this study, the AVL Boost software was used to analyse characteristics of the gasoline engine when operating with different mixtures of ethanol, methanol, butanol, and gasoline (by volume). Results obtained from different fuel blends showed that when alcohol blends were used, brake power decreased and the brake specific fuel consumption increased compared to when using gasoline, and CO and HC concentrations decreased as the fuel blends percentage increased.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

A Multi-Cylinder HCCI Engine Model for Control

2004 ◽  
Author(s):  
Jason S. Souder ◽  
Parag Mehresh ◽  
J. Karl Hedrick ◽  
Robert W. Dibble
Keyword(s):  
Design Process ◽  
Control Design ◽  
The Other ◽  
Variable Valve Timing ◽  
Valve Timing ◽  
Coupling Effects ◽  
Hcci Engine ◽  
Engine Model ◽  
Hcci Engines ◽  
Variable Valve

Homogeneous charge compression ignition (HCCI) engines are a promising engine technology due to their low emissions and high efficiencies. Controlling the combustion timing is one of the significant challenges to practical HCCI engine implementations. In a spark-ignited engine, the combustion timing is controlled by the spark timing. In a Diesel engine, the timing of the direct fuel injection controls the combustion timing. HCCI engines lack such direct in-cylinder mechanisms. Many actuation methods for affecting the combustion timing have been proposed. These include intake air heating, variable valve timing, variable compression ratios, and exhaust throttling. On a multi-cylinder engine, the combustion timing may have to be adjusted on each cylinder independently. However, the cylinders are coupled through the intake and exhaust manifolds. For some of the proposed actuation methods, affecting the combustion timing on one cylinder influences the combustion timing of the other cylinders. In order to implement one of these actuation methods on a multi-cylinder engine, the engine controller must account for the cylinder-to-cylinder coupling effects. A multi-cylinder HCCI engine model for use in the control design process is presented. The model is comprehensive enough to capture the cylinder-to-cylinder coupling effects, yet simple enough for the rapid simulations required by the control design process. Although the model could be used for controller synthesis, the model is most useful as a starting point for generating a reduced-order model, or as a plant model for evaluating potential controllers. Specifically, the model includes the dynamics for affecting the combustion timing through exhaust throttling. The model is readily applicable to many of the other actuation methods, such as variable valve timing. Experimental results validating the model are also presented.

Effect of Narrow Cut Oil Shale Derived Distillates on HCCI Engine Performance

2009 ◽  
Author(s):  
Scott J. Eaton ◽  
Bruce G. Bunting ◽  
Samuel A. Lewis ◽  
Craig Fairbridge
Keyword(s):  
Oil Shale ◽  
Engine Performance ◽  
Hcci Engine

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

Sign in / Sign up

Export Citation Format

Share Document