Computer Program in Visual Basic Language for Manufacture of Helical Cutting Tools

2012 ◽  
Vol 488-489 ◽  
pp. 813-818
Author(s):  
Ngoc Thiem Vu ◽  
Shinn Liang Chang ◽  
Jackson Hu ◽  
Tacker Wang
Keyword(s):  
Computer Program ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Technical Parameters ◽  
Manufacture Process ◽  
Basic Language ◽  
Tool Profile ◽  
Relief Angle ◽  
Economical Consideration ◽  
Visual Basic Language

The helical cutting tools have complex geometries. A rack cutter is the most economical tool that has been used for manufacturing helical cutting tool. In this paper, the computer program has been designed to evaluate the manufacture abilities following design concept and analyze the technical parameters of helical cutting tool. The program can simulate the sections of helical cutting tool and the rack cutter, analyze the clearance angle, relief angle, and width top of the helical cutting tool, and modify the rack cutter profile to show the helical cutting tool profile suitably. This program can predict the differences during manufacture process and give the best solution for economical consideration.

Development of program-driven plug-in for conical counter-rotating twin screw based on SolidWorks

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Liqun Dong ◽  
Junwei Zhang ◽  
Liang Qin ◽  
Ping Xue ◽  
Yun Ma ◽  
...  
Keyword(s):  
Parametric Design ◽  
Cone Angle ◽  
Three Dimensional ◽  
Visual Basic ◽  
Automatic Generation ◽  
Three Dimensional Model ◽  
Modeling Process ◽  
Basic Language ◽  
Twin Screw ◽  
Visual Basic Language

Abstract Owing to the existence of the cone angle, the size of a conical counter-rotating twin screw continuously changes along the axis, so it is not easy to model using SolidWorks. In this study, the parametric design of the modeling process is completed based on the Visual Basic language and a program-driven method. Finally, the SolidWorks program plug-in and user interface are developed to complete the automatic generation of the three-dimensional model of a conical counter-rotating twin screw.

scholarly journals Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1783
Author(s):  
Hamza A. Al-Tameemi ◽  
Thamir Al-Dulaimi ◽  
Michael Oluwatobiloba Awe ◽  
Shubham Sharma ◽  
Danil Yurievich Pimenov ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Cutting Tool ◽  
Good Practice ◽  
Cutting Tools ◽  
Statistical Design ◽  
Cutting Parameters ◽  
Statistical Design Of Experiments ◽  
Hole Quality ◽  
Coated Tools ◽  
Tool Coating

Aluminum alloys are soft and have low melting temperatures; therefore, machining them often results in cut material fusing to the cutting tool due to heat and friction, and thus lowering the hole quality. A good practice is to use coated cutting tools to overcome such issues and maintain good hole quality. Therefore, the current study investigates the effect of cutting parameters (spindle speed and feed rate) and three types of cutting-tool coating (TiN/TiAlN, TiAlN, and TiN) on the surface finish, form, and dimensional tolerances of holes drilled in Al6061-T651 alloy. The study employed statistical design of experiments and ANOVA (analysis of variance) to evaluate the contribution of each of the input parameters on the measured hole-quality outputs (surface-roughness metrics Ra and Rz, hole size, circularity, perpendicularity, and cylindricity). The highest surface roughness occurred when using TiN-coated tools. All holes in this study were oversized regardless of the tool coating or cutting parameters used. TiN tools, which have a lower coating hardness, gave lower hole circularity at the entry and higher cylindricity, while TiN/TiAlN and TiAlN seemed to be more effective in reducing hole particularity when drilling at higher spindle speeds. Finally, optical microscopes revealed that a built-up edge and adhesions were most likely to form on TiN-coated tools due to TiN’s chemical affinity and low oxidation temperature compared to the TiN/TiAlN and TiAlN coatings.

scholarly journals Remaining Useful Life Prediction of Cutting Tools Using an Inverse Gaussian Process Model

2021 ◽  
Vol 11 (11) ◽  
pp. 5011
Author(s):  
Yuanxing Huang ◽  
Zhiyuan Lu ◽  
Wei Dai ◽  
Weifang Zhang ◽  
Bin Wang
Keyword(s):  
Surface Roughness ◽  
Failure Criterion ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Remaining Useful Life ◽  
Model Parameters ◽  
Inverse Gaussian ◽  
Wear Process ◽  
Useful Life ◽  
Dynamic Wear

In manufacturing, cutting tools gradually wear out during the cutting process and decrease in cutting precision. A cutting tool has to be replaced if its degradation exceeds a certain threshold, which is determined by the required cutting precision. To effectively schedule production and maintenance actions, it is vital to model the wear process of cutting tools and predict their remaining useful life (RUL). However, it is difficult to determine the RUL of cutting tools with cutting precision as a failure criterion, as cutting precision is not directly measurable. This paper proposed a RUL prediction method for a cutting tool, developed based on a degradation model, with the roughness of the cutting surface as a failure criterion. The surface roughness was linked to the wearing process of a cutting tool through a random threshold, and accounts for the impact of the dynamic working environment and variable materials of working pieces. The wear process is modeled using a random-effects inverse Gaussian (IG) process. The degradation rate is assumed to be unit-specific, considering the dynamic wear mechanism and a heterogeneous population. To adaptively update the model parameters for online RUL prediction, an expectation–maximization (EM) algorithm has been developed. The proposed method is illustrated using an example study. The experiments were performed on specimens of 7109 aluminum alloy by milling in the normalized state. The results reveal that the proposed method effectively evaluates the RUL of cutting tools according to the specified surface roughness, therefore improving cutting quality and efficiency.

Cutting Tool Wear and Mechanisms of Chip Formation During High-Speed Machining of Compacted Graphite Iron

2007 ◽  
Author(s):  
Niniza S. P. Dlamini ◽  
Iakovos Sigalas ◽  
Andreas Koursaris
Keyword(s):  
Tool Wear ◽  
Surface Finish ◽  
Failure Criterion ◽  
Cutting Tool ◽  
Flank Wear ◽  
Cutting Tools ◽  
Compacted Graphite Iron ◽  
Crater Wear ◽  
Compacted Graphite ◽  
Cutting Speeds

Cutting tool wear of polycrystalline cubic boron nitride (PcBN) tools was investigated in oblique turning experiments when machining compacted graphite iron at high cutting speeds, with the intention of elucidating the failure mechanisms of the cutting tools and presenting an analysis of the chip formation process. Dry finish turning experiments were conducted in a CNC lathe at cutting speeds in the range of 500–800m/min, at a feed rate of 0.05mm/rev and depth of cut of 0.2mm. Two different tool end-of-life criteria were used: a maximum flank wear scar size of 0.3mm (flank wear failure criterion) or loss of cutting edge due to rapid crater wear to a point where the cutting tool cannot machine with an acceptable surface finish (surface finish criterion). At high cutting speeds, the cutting tools failed prior to reaching the flank wear failure criterion due to rapid crater wear on the rake face of the cutting tools. Chip analysis, using SEM, revealed shear localized chips, with adiabatic shear bands produced in the primary and secondary shear zones.

Hard Nano-Crystalline Coatings for Cutting Tools

2007 ◽  
Vol 567-568 ◽  
pp. 185-188 ◽  
Author(s):  
Miroslav Piska
Keyword(s):  
High Speed ◽  
Metal Cutting ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Dry Cutting ◽  
Nano Crystalline ◽  
The Right ◽  
Machining Productivity ◽  
Hard Cutting ◽  
Cutting Tool Materials

Modern trends in metal cutting, high speed/feed machining, dry cutting and hard cutting set more demanding characteristics for cutting tool materials. The exposed parts of the cutting edges must be protected against the severe loading conditions and wear. The most significant coatings methods for cutting tools are PVD and CVD/MTCVD today. The choice of the right substrate or the right protective coating in the specific machining operation can have serious impact on machining productivity and economy. In many cases the deposition of the cutting tool with a hard coating increases considerably its cutting performance and tool life. The coating protects the tool against abrasion, adhesion, diffusion, formation of comb cracks and other wear phenomena.

scholarly journals Preparation and cutting performance of nano-scaled Al2O3-coated micro-textured cutting tool prepared by atomic layer deposition

2021 ◽  
Vol 40 (1) ◽  
pp. 77-86
Author(s):  
Siwen Tang ◽  
Pengfei Liu ◽  
Zhen Su ◽  
Yu Lei ◽  
Qian Liu ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Atomic Layer Deposition ◽  
Cutting Force ◽  
Cutting Tool ◽  
Orthogonal Cutting ◽  
Cutting Tools ◽  
Atomic Layer ◽  
Cutting Performance ◽  
Cutting Test ◽  
Layer Deposition

Abstract Al2O3 nano-scaled coating was prepared on micro-textured YT5 cemented carbide cutting tools by atomic layer deposition ALD. The effect of Al2O3 nano-scaled coating, with and without combined action of texture, on the cutting performance was studied by orthogonal cutting test. The results were compared with micro-textured cutting tool and YT5 cutting tool. They show that the micro-texture and nano-scaled Al2O3 coated on the micro-texture both can reduce the cutting force and friction coefficient of the tool, and the tools with nano-scaled Al2O3 coated on the micro-texture are more efficient. Furthermore, the friction coefficient of the 100 nm Al2O3-coated micro-texture tool is relatively low. When the distance of the micro-pits is 0.15 mm, the friction coefficient is lowest among the four kinds of pit textured nanometer coating tools. The friction coefficient is the lowest when the direction of the groove in strip textured nanometer coating tool is perpendicular to the main cutting edge. The main mechanism of the nanometer Al2O3 on the micro-textured tool to reduction in cutting force and the friction coefficient is discussed. These results show that the developed tools effectively decrease the cutting force and friction coefficient of tool–chip interface.

Representation and Exchange of Digital Catalogues of Cutting Tools

2014 ◽  
Author(s):  
Yujiang Li ◽  
Qiuling Huang ◽  
Mikael Hedlind ◽  
Gunilla Sivard ◽  
Magnus Lundgren ◽  
...  
Keyword(s):  
System Architecture ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Cloud Manufacturing ◽  
Software Systems ◽  
Semantic Classification ◽  
Product Models ◽  
Important Research Topic ◽  
Manufacturing Resource ◽  
General Product

Information management for manufacturing resources such as cutting tools is an important research topic in the context of cloud manufacturing. Vendors and customers usually use catalogues to communicate information for such manufacturing resource. Incompatibilities of information in syntax, semantics, and structure among supply chains often result in inefficient manual sharing and management of the catalogue information. It is difficult for cloud based applications to pool information from various sources. This communication failure calls for a system neutral solution for data modeling and exchange to enhance interoperability of the cutting tool catalogue information. Previous studies has present solutions for representation of the cutting tool information with STEP AP242 (ISO/DIS 10303-242) with semantic classification referring to a PLib (ISO 13584, Part Library) based dictionary. This approach can be extended for the catalogue modeling, due to functionalities for specification and configuration control of general product variants in the same standard. With a modeling approach with standardized information schemas, system architecture to guide implementation is proposed to enhance the communication in practice. Relative elements to represent vendors’ catalogues and customers’ requirements are modeled. Associations to the PLib-based dictionary complete semantics and enable information mapping between vendors and customers. Principles of the mapping are identified to facilitate implementation of related software systems. Prototypes are developed to verify the proposed system architecture. The proposed solution is promising to migrate to other types of products than cutting tools, because the data models are based on the general product models defined in AP242.

Wear of Coated Cutting Tool Based on AdvantEdge

2014 ◽  
Vol 551 ◽  
pp. 221-227
Author(s):  
Zhi Qiang Zhang ◽  
Tie Qiang Gang ◽  
Yi Kai Yi
Keyword(s):  
Wear Rate ◽  
Coating Thickness ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Simulation Software ◽  
Machining Process ◽  
Sliding Velocity ◽  
Coating Materials ◽  
Element Simulation ◽  
Coated Tool

In this paper, based on finite element simulation software AdvantEdge, the effects of different coating materials and thickness on the wear of cutting tools during the machining process have been studied. For the tools with coating materials of TiAlN, Al2O3, TiN, TiC, we can calculate the wear rate according to the Usui mathematical model of tool wear, and then consider thickness factor of TiC coating. Because of the lowest thermal conductivity, the workpiece cut by TiC coated tool will soften first and more over cutting time, it result in the lowest wear rate. And with the increase of coating thickness, the effect of "thermal barrier" is more obvious for the relatively thicker coating tool, but the relative sliding velocity between the chip and tool is increasing meanwhile, so a suitable coating thickness is necessary.

Forecasting Performance of Ceramic Cutting Tool

2017 ◽  
Vol 736 ◽  
pp. 86-90 ◽  
Author(s):  
Vyacheslav Maksarov ◽  
A. Khalimonenko
Keyword(s):  
Electrical Resistance ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Tool Material ◽  
Ceramic Materials ◽  
Specific Electrical Resistance ◽  
Testing Methods ◽  
Microstructural Parameters ◽  
Forecasting Performance ◽  
Nondestructive Testing Methods

The article considers the problems of forecasting the performance of cutting tools equipped with replaceable ceramic cutting bits. It is proposed to forecast the operability of ceramic tools on the ground of dependence between its performance characteristics and the microstructural parameters of the tool material. It is proposed to determine the parameters of ceramic bits microstructure by a nondestructive testing methods based on measuring the specific electrical resistance of ceramic materials. As a result of the study we have undertaken, a relationship was detected between the performance and specific electrical resistance of ceramic cutting tools.

Sign in / Sign up

Export Citation Format

Share Document