Grinding Force of Ultrasonic Vibration Assisted Grinding Combined with EDM

2012 ◽  
Vol 500 ◽  
pp. 287-294 ◽  
Author(s):  
Peng Yan ◽  
Jian Hua Zhang ◽  
Guo Sheng Su
Keyword(s):  
Ultrasonic Vibration ◽  
Pulse Discharge ◽  
Processing Parameters ◽  
Grinding Force ◽  
Force Model ◽  
Grinding Process ◽  
Machining Parameters ◽  
Processing Efficiency ◽  
Machined Surface ◽  
Ultrasonic Vibration Assisted Grinding

In the ultrasonic vibration assisted grinding and EDM, grinding and pulse discharge machining are favorable conditions for each other, can significantly improve the processing efficiency by adjusting the processing parameters, and get high-quality machined surface. The grinding force is an important parameter in characterizing the grinding process, which is the g the main object of study in grinding process. The interaction of ultrasonic vibration, grinding and EDM is investigated. From the view of material removal volume, the volume of removal by EMD is calculated. Then the volume by grinding is gotten. The grinding force model of combined machining is established. The influence machining parameters on grinding force is studied, which is helpful for the detection and control of grinding force.

scholarly journals On the Grinding Performance of Alumina Wheels in Ultrasonic Vibration-Assisted Grinding of Hardened GCr15 Steel

2021 ◽  
Author(s):  
Yutong Qiu ◽  
Biao Zhao ◽  
Yang Cao ◽  
Wenfeng Ding ◽  
Yucan Fu ◽  
...  
Keyword(s):  
Surface Quality ◽  
Ultrasonic Vibration ◽  
Grinding Force ◽  
Grinding Wheel ◽  
Wear Property ◽  
Wheel Wear ◽  
Machined Surface ◽  
Gcr15 Steel ◽  
Abrasive Grains ◽  
Ultrasonic Vibration Assisted Grinding

Abstract Composite manufacturing with multiple energy fields is an important source of processing technology innovation. In this work, comparative experiments on the conventional grinding (CG) and ultrasonic vibration-assisted grinding (UVAG) of hardened GCr15 steel were conducted with WA wheel. The grinding wheel wear patterns and chips were characterized. In addition, grinding force, force ratio, and ground surface quality were investigated to evaluate wheel performance. Results illustrate that the interaction between abrasive grains and workpiece in UVAG process has the characteristics of high frequency and discontinuity. The wear property of abrasive grains is changed and the grinding force is decreased because the generation of micro-fracture in abrasive grains improves the grinding wheel self-sharpening. Better surface quality is obtained, the surface roughness is reduced by up to 18.96%, and the number of defects on the machined surface is reduced through the superior reciprocating ironing of UVAG. Accordingly, WA wheel performance is improved by UVAG.

Investigation on Machining Characteristics for Tangential Ultrasonic Vibration Assisted Grinding

2010 ◽  
Vol 34-35 ◽  
pp. 282-286
Author(s):  
Wei Feng Lang ◽  
Hong Li Zhang
Keyword(s):  
Surface Quality ◽  
Ultrasonic Vibration ◽  
Critical Speed ◽  
Grinding Force ◽  
Machining Parameters ◽  
Theory Analysis ◽  
Kinematic Characteristics ◽  
Ultrasonic Vibration Assisted Grinding ◽  
Machining Characteristics ◽  
Good Agreement

A critical speed formula was given based on the analysis of kinematic characteristics during tangential ultrasonic vibration assisted grinding (TUAG) process. By the formula, the machining parameters can be correctly set to insure the separate characteristics of TUAG process. The grinding force can be decreased and the machining surface quality can be improved during TUAG process with separability. Grinding experiments were conducted, and the experiment results are in good agreement with theory analysis results.

Analysis and Experimental Investigation of Grinding Force in Ultrasonic Vibration Mill-Grinding of Brittle Materials

2013 ◽  
Vol 568 ◽  
pp. 3-8
Author(s):  
Guo Chao Qiao ◽  
Guo Jun Dong ◽  
Ming Zhou
Keyword(s):  
Experimental Investigation ◽  
Silicon Nitride ◽  
Ultrasonic Vibration ◽  
Grinding Force ◽  
Force Model ◽  
Machining Parameters ◽  
Indentation Fracture ◽  
Grinding Forces ◽  
Nitride Ceramics ◽  
Vibration Mill

Based on the Kinematic analysis, the indentation fracture mechanics is used to build a force model of ultrasonic vibration mill-grinding. To verify the force model, experiments are carried out for silicon nitride ceramics with various machining parameters, meanwhile grinding forces are measured. Finally, comparison between predicted results with experimental results is presented.

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

2013 ◽  
Vol 770 ◽  
pp. 207-212
Author(s):  
Yan Wang ◽  
Bin Lin ◽  
Shao Lei Wang ◽  
Xiao Yan Cao
Keyword(s):  
Ultrasonic Vibration ◽  
Removal Rate ◽  
Grinding Force ◽  
Force Model ◽  
Frequency Increase ◽  
Ductile Materials ◽  
Grinding Force Model ◽  
Force Increase ◽  
Force Ratio ◽  
Ultrasonic Vibration Assisted Grinding

Ultrasonic vibration Assisted Grinding (UAG) is an effective processingmethod for difficultmachiningmetalmaterial.This paper put forward a new model to predict the grinding force in UAG. The paper presents the abrasive grain motion equations, removal rate model,grinding force model and grinding force ratio model.According to the grinding force model, the grinding force will decrease as the spindle speed, vibration amplitude and vibration frequency increase. The grinding force increase as the grinding depth and feed rate increase.

Study on Grinding Force in Two-Dimensional Ultrasonic Grinding Nano-Ceramics

2010 ◽  
Vol 42 ◽  
pp. 204-208 ◽  
Author(s):  
Xiang Dong Li ◽  
Quan Cai Wang
Keyword(s):  
Mathematical Model ◽  
Ultrasonic Vibration ◽  
Contact Time ◽  
Reaction Force ◽  
Grinding Force ◽  
Two Dimensional ◽  
Indentation Fracture ◽  
Ultrasonic Grinding ◽  
The Impact ◽  
Ultrasonic Vibration Assisted Grinding

In this paper, the characteristic of grinding force in two-dimensional ultrasonic vibration assisted grinding nano-ceramic was studied by experiment based on indentation fracture mechanics, and mathematical model of grinding force was established. The study shows that grinding force mainly result from the impact of the grains on the workpiece in ultrasonic grinding, and the pulse power is much larger than normal grinding force. The ultrasonic vibration frequency is so high and the contact time of grains with the workpiece is so short that the pulse force will be balanced by reaction force from workpiece. In grinding workpiece was loaded by the periodical stress field, which accelerates the fatigue fracture.

Grinding Force Model for Low-Speed Grinding Based on Impact Principle

2013 ◽  
Vol 797 ◽  
pp. 123-128
Author(s):  
Ming He Liu ◽  
Xiu Ming Zhang ◽  
Shi Chao Xiu
Keyword(s):  
Sliding Friction ◽  
Impact Load ◽  
Grinding Force ◽  
Calculation Model ◽  
Force Model ◽  
Grinding Process ◽  
Low Speed ◽  
Impact Area ◽  
Force Mechanism ◽  
The Impact

In the low-speed grinding process, the force generated when the wheel grinding the workpiece is the result of sliding friction, plough and cutting. While in the actual study, the cutting process has attracted extensive attention. Impact effect to the entire grinding process on the contact is ignored so that the error exists between the calculation grinding force and the measured grinding force. Basing on the shock effect to the grinding process, the paper divides the contact area into impact area and cutting area. And the model of impact load generated from single grit is built. Moreover, the grinding force theoretical calculation model and total grinding force mathematical model is also constructed by analyzing the impact load affecting on the grinding force mechanism. Finally experimental study verifies the correctness of theoretical analysis.

scholarly journals Effect to the Surface Composition in Ultrasonic Vibration-Assisted Grinding of BK7 Optical Glass

2020 ◽  
Vol 10 (2) ◽  
pp. 516 ◽  
Author(s):  
Pei Yi Zhao ◽  
Ming Zhou ◽  
Xian Li Liu ◽  
Bin Jiang
Keyword(s):  
Surface Roughness ◽  
Ultrasonic Vibration ◽  
Material Removal ◽  
Surface Composition ◽  
Rotation Speed ◽  
Optical Glass ◽  
Machined Surface ◽  
Spindle Rotation ◽  
Ultrasonic Vibration Assisted Grinding ◽  
Ductile Removal

Because of the changes in cutting conditions and ultrasonic vibration status, the proportion of multiple material removal modes are of uncertainty and complexity in ultrasonic vibration-assisted grinding of optical glass. Knowledge of the effect of machined surface composition is the basis for better understanding the influence mechanisms of surface roughness, and also is the key to control the surface composition and surface quality. In the present work, 32 sets of experiments of ultrasonic vibration-assisted grinding of BK7 optical glass were carried out, the machined surface morphologies were observed, and the influence law of machining parameters on the proportion of different material removal was investigated. Based on the above research, the effect of surface composition was briefly summarized. The results indicated that the increasing of spindle rotation speed, the decreasing of feed rate and grinding depth can improve the proportion of ductile removal. The introduction of ultrasonic vibration can highly restrain the powdering removal, and increase the proportion of ductile removal. Grinding depth has a dominant positive effect on the surface roughness, whereas the spindle rotation speed and ultrasonic amplitude both have negative effect, which was caused by the reduction of brittle fracture removal.

scholarly journals Machinability Investigation in Dry Turning of Ti–6al–4v With a Novel Tib2-based Cermet Tool Using Response Surface Methodology

2020 ◽  
Author(s):  
Yikun Yuan ◽  
Wenbin Ji ◽  
Shijie Dai ◽  
Huibo Zhang
Keyword(s):  
Surface Roughness ◽  
Cutting Temperature ◽  
Cutting Parameters ◽  
Machining Parameters ◽  
Processing Efficiency ◽  
Machined Surface ◽  
Dry Turning ◽  
Diffusion Wear ◽  
Cutting Length ◽  
Machined Surface Roughness

Abstract To ensure accuracy and improve the processing efficiency of Ti–6Al–4V alloys, dry turning experiment of Ti–6Al–4V was carried out using a novel TiB2-based cermet tool. The tool was reinforced by nanoscale VC additive and exhibited excellent hardness and fracture toughness.Response Surface Methodology (RSM) was used in the experiment to verify andevaluatethe cutting performance ofTiB2-based cermet tool.The cutting forces and machined surface roughness (Ra) were selected as the optimization objective. An analysis of variance (ANOVA) was used to find out the effective machining parameters on response factorsand demonstrate correctness of the models. It was found that theeffective factor on surface roughness was feed rate, while cutting depth significantly affected cutting forces.And the confirmation experiments showedthat the predicted values were in good agreement with experimental values. Based on the optimized cutting parameters, the tool life was measured and tool wear mechanismwasinvestigated. When the vc, apandfwere 100 mm/min, 0.16 mm, 0.1 mm/rev respectively for Ra optimization, the cutting length and tool lifecould reach to 3233 m and 29.4 min, respectively, due to the excellentwear resistance and stability of TiB2-based cermet tool at high cutting temperature. In this case, the main wear mechanism was adhesive wear and diffusion wear.

Sign in / Sign up

Export Citation Format

Share Document