Research and Design on a New Roll of Material Conveying Composite Regulating Machine System

2012 ◽  
Vol 503-504 ◽  
pp. 432-436
Author(s):  
Jun Xu Liu
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
System Design ◽  
Structure Design ◽  
Machine System ◽  
Design Structure ◽  
Conceptual Designs ◽  
Research And Design

This paper studies the old offset machine mathematical model, corrects the shortcomings of its mathematical model and presents a more effective, more reasonable mathematical models. Then the conceptual designs, system design, structure design of the model are carried out. After nearly 2 years operating, the deviation adjusting mechanism has been proved to possess a good practicability and adjusting deviation.

scholarly journals STUDY OF TRANSIENT AND STATIONARY OPERATION MODES OF SYNCHRONOUS SYSTEM CONSISTING IN TWO MACHINES

2017 ◽  
Vol 60 (3) ◽  
pp. 228-236
Author(s):  
V. S. Safaryan
Keyword(s):  
Mathematical Model ◽  
Steady State ◽  
Power System ◽  
Mathematical Models ◽  
Coordinate System ◽  
Electric Power ◽  
Electric Power System ◽  
Machine System ◽  
Transient Regimes ◽  
The Mathematical Model

The solution of the problem of reliable functioning of an electric power system (EPS) in steady-state and transient regimes, prevention of EPS transition into asynchronous regime, maintenance and restoration of stability of post-emergency processes is based on formation and realization of mathematical models of an EPS processes. During the functioning of electric power system in asynchronous regime, besides the main frequencies, the currents and voltages include harmonic components, the frequencies of which are multiple of the difference of main frequencies. At the two-frequency asynchronous regime the electric power system is being made equivalent in a form of a two-machine system, functioning for a generalized load. In the article mathematical models of transient process of a two-machine system in natural form and in d–q coordinate system are presented. The mathematical model of two-machine system is considered in case of two windings of excitement at the rotors. Also, in the article varieties of mathematical models of EPS transient regimes (trivial, simple, complete) are presented. Transient process of a synchronous two-machine system is described by the complete model. The quality of transient processes of a synchronous machine depends on the number of rotor excitation windings. When there are two excitation windings on the rotor (dual system of excitation), the mathematical model of electromagnetic transient processes of a synchronous machine is represented in a complex form, i.e. in coordinate system d, q, the current of rotor being represented by a generalized vector. In asynchronous operation of a synchronous two-machine system with two excitation windings on the rotor the current and voltage systems include only harmonics of two frequencies. The mathematical model of synchronous steady-state process of a two-machine system is also provided, and the steady-state regimes with different structures of initial information are considered.

A mathematical model and an algorithm for sampling sets of components on the Assembly enterprises of space technology

2018 ◽  
Vol 15 (1) ◽  
pp. 39-55
Author(s):  
V. B. Rudakov ◽  
V. M. Makarov ◽  
M. I. Makarov
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Space Technology ◽  
Economic Costs ◽  
Problem Statement ◽  
Optimal Plan ◽  
Product Mix ◽  
Technical Parameters ◽  
Complex Products ◽  
Assembly Plants

The article considers the problem of determining the rational plans of the input sampling reliability and technical parameters of components of space technology, the totality of which is supplied to the Assembly plants for the manufacture of complex products of space technology. Problem statement and mathematical model based on the minimization of the economic costs of control and losses related to the risks of taking wrong decisions, are given in the article. The properties of the mathematical models are investigated, the algorithm for its optimization is developed. The result is an optimal plan for the sampling of sets of components, which includes: an optimal product mix subject to mandatory control of the aggregate and optimum risks of first and second kind, when acceptance number of statistical plan is zero. The latter circumstance is due to the high requirements of reliability and technical parameters of products of space technology.

Dynamic Analysis on a Cable-Driven Interventional Active Catheter Using Kane's Method Combined with Screw Theory

2014 ◽  
Vol 527 ◽  
pp. 140-145
Author(s):  
Da Xu Zhao ◽  
Bai Chen ◽  
Guo Zhong Shou ◽  
Yu Qi Gu
Keyword(s):  
Mathematical Model ◽  
Dynamic Analysis ◽  
Motion Control ◽  
Screw Theory ◽  
Driving Forces ◽  
Structure Design ◽  
Kinematics And Dynamics ◽  
Existing Problems ◽  
Blind Area ◽  
The Mathematical Model

In view of the existing problems of traditional interventional catheters, particularly poor activity, operation difficulty and mass blind area, a novel interventional catheter with a cable-driven active head-end is proposed, and a prototype was built to verify the performance. This paper deals with the kinematics and dynamics of the cable-driven prototype, a dynamic model based on Kanes method combined with screw theory was presented in this paper. According the mathematical model and the prototypes structure, the analysis of kinematics and dynamics of active head-end-end is done in the environment of Mathematica. The needed driving forces of every joint when the system moving along planned trajectory are calculated. The results can provide a basis for the structure design and motion control of the interventional active catheter.

Rapid determination of glomerular filtration rate by single-bolus inulin: a comparison of estimation analyses

1998 ◽  
Vol 84 (6) ◽  
pp. 2154-2162 ◽  
Author(s):  
Cord Sturgeon ◽  
Albert D. Sam ◽  
William R. Law
Keyword(s):  
Mathematical Model ◽  
Glomerular Filtration Rate ◽  
Mathematical Models ◽  
Glomerular Filtration ◽  
Filtration Rate ◽  
Rapid Determination ◽  
Constant Infusion ◽  
Sprague Dawley ◽  
Single Bolus ◽  
Sprague Dawley Rats

Rapid measurement of glomerular filtration rate (GFR) by an inulin single-bolus technique would be useful, but its accuracy has been questioned. We hypothesized that reported inaccuracies reflect the use of inappropriate mathematical models. GFR was measured in 14 intact and 5 unilaterally nephrectomized conscious male Sprague-Dawley rats (mean weight 368 ± 12 g) by both single-bolus (25 mg/kg) and constant-infusion techniques (0.693 mg ⋅ kg−1 ⋅ min−1). The temporal decline in plasma inulin concentration was analyzed through biexponential curve fitting, which accounted for renal inulin loss before complete vascular and interstitial mixing. We compared our mathematical model based on empirical rationale with those of other investigators whose studies suggest inaccuracy of single-bolus methods. Our mathematical model yielded GFR values by single bolus that agreed with those obtained by constant infusion [slope = 0.94 ± 0.16 (SE); y intercept = 0.23 ± 0.64; r = 0.82]. In comparison to the data obtained by constant inulin infusion, this method yielded a very small bias of −0.0041 ± 0.19 ml/min. Two previously reported models yielded unsatisfactory values (slope = 1.46 ± 0.34, y intercept = 0.47 ± 1.5, r = 0.72; and slope = 0.17 ± 1.26, y intercept = 17.15 ± 5.14, r = 0.03). The biases obtained by using these methods were −2.21 ± 0.42 and −13.90 ± 1.44 ml/min, respectively. The data indicate that when appropriate mathematical models are used, inulin clearance after single-bolus delivery can be used to measure GFR equivalent to that obtained by constant infusion of inulin. Attempts to use methods of analysis for simplicity or expediency can result in unacceptable measurements relative to the clinical range of values seen.

Twin Models

1970 ◽  
Vol 19 (1-2) ◽  
pp. 141-141
Author(s):  
L. Gedda ◽  
G. Brenci ◽  
M. T. Lun
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Genetic Parameters ◽  
Simultaneous Recording ◽  
Theoretical Relationship ◽  
Twin Models

The theoretical relationship between the distribution of a given trait in a population of twin pairs and several genetic parameters has been examined. In particular, a series of mathematical models has been worked out, that, when applied to a twin population, nonselected for the occurrence of a given trait and nondiagnosed as to zygosity, leads to an estimate of:1) The MZ: DZ ratio in the population;2) The frequency of the genotype responsible for a given trait;3) The probability of manifestation of the trait;4) The value of epistatic factors.A further mathematical model affords the estimate of linkage in the hypothesis of simultaneous recording of more than one trait.

A Symmetry Analysis of Design Structure: 1,000 Years of Continuity and Change in Puebloan Ceramic Design

2010 ◽  
Vol 75 (4) ◽  
pp. 743-772 ◽  
Author(s):  
Dorothy K. Washburn ◽  
Donald W. Crowe ◽  
Richard V.N. Ahlstrom
Keyword(s):  
Social Relationships ◽  
Structural Integrity ◽  
Structure Design ◽  
American Southwest ◽  
Agricultural Communities ◽  
Continuity And Change ◽  
15Th Century ◽  
Design Structure ◽  
Settlement Type ◽  
Ceramic Design

This paper postulates that cultural entities with long term structural integrity are characterized by symmetrical relationships between and among the constituent sectors of society. We demonstrate how such social relationships are embedded in the symmetrical arrangements of motifs in geometric design. We test this premise with an analysis of 1000 years of ceramic design from the northern American Southwest, AD 600-1600, with a description of the continuities and changes in the plane pattern symmetries that structure design. Two major points of change in symmetry use at c. AD 900 and AD 1300 correlate with changes in settlement type from pithouses to unit pueblos and from unit pueblos to multi-storied plaza oriented pueblos that accompanied adjustments to changes in environmental conditions. We propose that in the American Southwest the predominant use of bifold symmetry is a structural metaphor for the reciprocal social relationships basic to the organization of small puebloan agricultural communities and that the changes in these symmetries reflect the changing integration of the household into an increasingly complex social system. This interpretation of the meaning of design structure is derived from cosmological principles embedded in 20th century ritual songs of the Hopi, descendents of the prehistoric puebloans, as well as depicted in images in their 15th century kiva wall murals. We present this interpretation of the sequence of pueblo development in the American Southwest in terms of the changing symmetrical nature of the social relationships that integrated the agricultural communities as an example of the insights possible with this new approach to design analysis.

Numerical modelling of swirling momentumless turbulent wake dynamics

2018 ◽  
pp. 37-48
Author(s):  
Андрей Геннадьевич Деменков ◽  
Геннадий Георгиевич Черных
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Mathematical Models ◽  
Equations Of Motion ◽  
Turbulent Wake ◽  
The Body ◽  
Jet Flows ◽  
Reynolds Stresses ◽  
Bodies Of Revolution ◽  
Averaged Equations

С применением математической модели, включающей осредненные уравнения движения и дифференциальные уравнения переноса нормальных рейнольдсовых напряжений и скорости диссипации, выполнено численное моделирование эволюции безымпульсного закрученного турбулентного следа с ненулевым моментом количества движения за телом вращения. Получено, что начиная с расстояний порядка 1000 диаметров от тела течение становится автомодельным. На основе анализа результатов численных экспериментов построены упрощенные математические модели дальнего следа. Swirling turbulent jet flows are of interest in connection with the design and development of various energy and chemical-technological devices as well as both study of flow around bodies and solving problems of environmental hydrodynamics, etc. An interesting example of such a flow is a swirling turbulent wake behind bodies of revolution. Analysis of the known works on the numerical simulation of swirling turbulent wakes behind bodies of revolution indicates lack of knowledge on the dynamics of the momentumless swirling turbulent wake. A special case of the motion of a body with a propulsor whose thrust compensates the swirl is studied, but there is a nonzero integral swirl in the flow. In previous works with the participation of the authors, a numerical simulation of the initial stage of the evolution of a swirling momentumless turbulent wake based on a hierarchy of second-order mathematical models was performed. It is shown that a satisfactory agreement of the results of calculations with the available experimental data is possible only with the use of a mathematical model that includes the averaged equations of motion and differential equations for the transfer of normal Reynolds stresses along the rate of dissipation. In the present work, based on the above mentioned mathematical model, a numerical simulation of the evolution of a far momentumless swirling turbulent wake with a nonzero angular momentum behind the body of revolution is performed. It is shown that starting from distances of the order of 1000 diameters from the body the flow becomes self-similar. Based on the analysis of the results of numerical experiments, simplified mathematical models of the far wake are constructed. The authors dedicate this work to the blessed memory of Vladimir Alekseevich Kostomakha.

Mathematical modelling.

2021 ◽  
Author(s):  
Ed Rutgers Durner
Keyword(s):  
Mathematical Model ◽  
Mathematical Modelling ◽  
Mathematical Models ◽  
Growth And Development ◽  
Fertilizer Recommendations ◽  
Mathematical Equations

Abstract Plants are studied to understand their growth and development so that their quality and productivity can be optimised. Models are developed that can be simple and descriptive, or quite complex with numerous mathematical equations; their level of complexity is linked to their purpose. This summary serves as an introduction to mathematical models in horticulture. It is not a manual for modelling itself, but rather an overview of how important mathematical models are in horticultural production. Mathematical models are used extensively in horticulture both extrinsically, i.e. when calculating chilling hour accumulations and intrinsically, i.e. when applying fertilizer to a crop. In chilling calculations, developed models are used directly. Fertilizer recommendations were probably developed using a mathematical model. The first part of this article discusses models in general and reviews general characteristics of mathematical models. The second part outlines the major uses of mathematical modelling in modern horticultural production. Presentations of specific models are limited in order to present a general discussion of models with examples that will interest most horticulturists.

Review of communication methods and system design structure for solar monitoring system

2018 ◽  
Author(s):  
S. S. S. Ranjit ◽  
A. F. M. F. Aqil ◽  
S. S. S. Baljit ◽  
Y. C. Wong
Keyword(s):  
System Design ◽  
Monitoring System ◽  
Design Structure ◽  
Communication Methods

scholarly journals World Experience in Creating Mathematical Models of Air Springs: Advantages and Disadvantages

2021 ◽  
pp. 25-42
Author(s):  
A. Y Kuzyshyn ◽  
S. A Kostritsia ◽  
Yu. H Sobolevska ◽  
А. V Batih
Keyword(s):  
Mathematical Model ◽  
Finite Element ◽  
Mathematical Models ◽  
Dynamic Behavior ◽  
High Speed ◽  
Vertical Direction ◽  
Rolling Stock ◽  
Air Spring ◽  
Advantages And Disadvantages ◽  
Mechanical Models

Purpose. Taking into account the production and commissioning of modern high-speed rolling stock, the authors are aimed to analyze the currently created mathematical models describing the dynamic behavior of the air spring, systematize them and consider the advantages and disadvantages of each model type. Methodology. For the analysis, a comparative chronological method was used, which makes it possible to trace the development of several points of view, concepts, theories. In accordance with the adopted decision equations, the existing models of air springs were divided into three groups: mechanical, thermodynamic and finite-elements. When analyzing mathematical models, the influence of a number of parameters on the dynamic behavior of the air spring, such as disturbing force frequency, heat transfer, nonlinear characteristics of materials, the shape of the membrane, etc., was considered. Findings. A feature of mechanical models is the determination of input parameters based on the analysis of experimental results, requires access to complex measuring equipment and must be performed for each new model of an air spring separately. Unlike mechanical models, which allow taking into account the damping effect of an air spring in the horizontal and vertical direction, thermodynamic models are mainly focused on studying the dynamic behavior of an air spring in the vertical direction. The use of the finite element method makes it possible to most accurately reproduce the dynamic behavior of an air spring, however, it requires significant expenditures of time and effort to create a finite element model and perform calculations. Originality. Mathematical models of the dynamic behavior of an air spring are systematized, and the importance of their study in conjunction with a spatial mathematical model of high-speed rolling stock is emphasized. Practical value. The analysis of the mathematical models of the dynamic behavior of the air spring shows the ways of their further improvement, indicates the possibility of their use in the spatial mathematical model of the rolling stock in accordance with the tasks set. It will allow, even at the design stage of high-speed rolling stock, to evaluate its dynamic characteristic and traffic safety indicators when interacting with a railway track.

Sign in / Sign up

Export Citation Format

Share Document