The Regeneration of the Spent Catalyst Resulted from 3,4,5,6-Tetrachloropyridine-2-Carbonitrile Synthesis

2012 ◽  
Vol 550-553 ◽  
pp. 2436-2446 ◽  
Author(s):  
Yang Li ◽  
Qiu Hong Ai ◽  
Hao Xin Wang ◽  
He’an Luo
Keyword(s):  
Activated Carbon ◽  
Thermal Desorption ◽  
Flow Rate ◽  
Social Benefit ◽  
Process Conditions ◽  
Spent Catalyst ◽  
Economical Benefit ◽  
Iodine Adsorption ◽  
Optimized Conditions ◽  
Temperature Time

In order to optimize the process conditions for regeneration of activated carbon form spent catalyst resulted from 3,4,5,6-tetrachloropyridine-2-carbonitrile synthesis. A two-step process involving the thermal desorption of spent activated carbon and the activation of activated carbon treated by thermal desorption with steam was designed. The influence of desorption temperature, time and the flow rate of nitrogen on the yield of chlorides, the iodine adsorption capacity and the yield of activated carbon were investigated, respectively . The optimal desorption conditions were: temperature of 650°C, time of 90min and the flow rate of nitrogen of 30ml/min. The yield of the chlorides obtained under the optimal conditions was 14.85%. The regeneration of activated carbon treated by thermal desorption with steam; the optimized conditions analyzed by RSM were regeneration temperature of 696°C, time of 84 min and flow rate of steam of 0.58g/min. The experimental results on the optimized conditions were iodine adsorption value of 1003.59mg / g, These methods can not only recover chloride in the spent activated carbon, but also the regeneration activated carbon could partially replace the fresh activated carbon, which would bring an obvious economical benefit and social benefit.

Preparation of Eupatorium Adenophorum Based Porous Carbon with Microwave Heating using Response Surface Methodology

2014 ◽  
Vol 33 (5) ◽  
pp. 427-437
Author(s):  
Zhao-qiang Zheng ◽  
Hong-ying Xia ◽  
C. Srinivasakannan ◽  
Jin-hui Peng ◽  
Li-bo Zhang
Keyword(s):  
Activated Carbon ◽  
Microwave Heating ◽  
Process Parameters ◽  
Flow Rate ◽  
Porous Carbon ◽  
Steam Flow ◽  
Process Conditions ◽  
Eupatorium Adenophorum ◽  
Activation Temperature ◽  
Steam Flow Rate

AbstractEupatorium adenophorum was utilized as raw materials for the preparation of activated carbon via microwave assisted steam activation. Influences of the three vital process parameters – activation temperature, activation duration and steam flow rate – have been assessed on the adsorption capacity and yield of Eupatorium adenophorum activated carbon (EAAC). The process parameters were optimized utilizing the Design Expert software and were identified to be an activation duration of 45 min, an activation temperature of 950 °C and a steam flow rate of 0.7 ml/min, with the resultant iodine number and yield being 1,010 mg/g and 20.13% respectively. The validity of process model to optimize the process parameters was verified using the analysis of variance (ANOVA). The key parameters that characterize quality of the porous carbon such as the BET surface area, total pore volume and average pore diameter were estimated to be 1,142 m2/g, 0.84 ml/g and 3.3 nm respectively, for the sample corresponding to the optimized process conditions. Additionally the pore structure is characterized using Scanning Electron Microscope (SEM). The present work strongly supports utilization of Eupatorium adenophorum as a potential precursor through microwave heating.

scholarly journals Activated Carbon Production from Agricultural Biomass Using Response Surface Method (RSM) for Cd (II) Removal

2014 ◽  
Vol 69 (3) ◽  
Author(s):  
Mutah Musa ◽  
Akira Kikuchi ◽  
Zaiton Abdul Majid ◽  
Jafariah Jaafar ◽  
Mohd Razman Salim
Keyword(s):  
Activated Carbon ◽  
Response Surface ◽  
Response Surface Method ◽  
Correlation Coefficients ◽  
Good Prospect ◽  
Surface Method ◽  
Model Equations ◽  
Optimized Conditions ◽  
Temperature Time

The production of activated carbon (AC) from sugarcane bagasse (SCB) was carried out using central composite design of response surface method to run a limited number of experiments with the possibility of revealing the interaction of three selected factors of temperature, time and nitrogen/steam flowrate at different levels. Two second order quadratic regression model equations were developed using statistical analysis with Design Expert® software. The models were used for the prediction of removal of Cd2+ and carbon yield. Correlation coefficients (R2) were 0.957 for removal and 0.985 for yield, showing the sufficiency of the model in predicting response within 13 experimental runs. Characterization of the product with optimal performance which was produced at 900oC, with nitrogen/steam flow of 100 mL/min and activation time of 30 minutes, was carried out. The performance showed this AC sample was able to remove 62.42% Cd2+ from an aqueous solution with concentration 2 mg/L within 2 hours at optimized conditions. Experimental results indicated that AC from SCB had good prospect for Cd2+ removal.

Effect of Activated Time on the Properties of ZnO/AC Composites from Spent Catalysts

2012 ◽  
Vol 518-523 ◽  
pp. 579-583 ◽  
Author(s):  
Wen Jin ◽  
Wen Wen Qu ◽  
Jin Hui Peng ◽  
Xin Hui Duan
Keyword(s):  
Zinc Oxide ◽  
Activated Carbon ◽  
Thermal Treatment ◽  
Surface Morphology ◽  
Catalyst Support ◽  
Spent Catalyst ◽  
Spent Catalysts ◽  
Iodine Adsorption ◽  
Organic Deposits ◽  
Good Precursor

After being subjected to thermal treatment by microwave, a carbon-based spent catalyst from vinyl acetate synthesis has been proved to be a good precursor for the production of ZnO/activated carbon (AC) composites. Different operating activated times were found to have effect on the properties of the composites. As the activated time rises, the surface area of the activated carbon that is acting as the catalyst support increases due to the decomposition of the organic deposits that are clogging the porous structure. XRD was used to evaluate the transformation of zinc acetate to zinc oxide after thermal treatment. Both the iodine adsorption capacity and the yield of the resulting composites were calculated and SEM-EDX analysis was used to evaluate the changes in surface morphology.

A Profoundly Touchy Approved Spectrofluorimetric Approach for Assurance of Ixabepilone as Anticancer Drug by Utilizing Its Quenching Impact on Acetoxymercuric Fluorescein Reagent

2021 ◽  
pp. 39-52
Author(s):  
Hesham Salem ◽  
Amany Abdelaziz ◽  
Aliaa Gamal ◽  
Ramy El Sabaa
Keyword(s):  
Human Plasma ◽  
Anticancer Drug ◽  
Fluorescence Intensity ◽  
Solution Concentration ◽  
Quenching Effect ◽  
Bulk Powder ◽  
Optimized Conditions ◽  
Temperature Time ◽  
Sulfur Containing ◽  
Satisfactory Recovery

A dependable, sensitive, basic and cheap spectrofluorimetric approach has been created for test of sulfur-containing drug; ixabepilone in bulk powder, vials and human plasma. The approach depends on the quenching effect of ixabepilone on the fluorescence intensity of acetoxymercuric fluorescene (AMF) reagent at λem of 530 nm and λex of 500 nm. Parameters which will control the reaction such as pH, AMF solution concentration, temperature, time and solvents were examined and optimized. According to the optimized conditions, the proposed approach was practiced over the concentration area of 20-100 ng mL-1 with adequate linearity (r = 0.9998). The developed approach was approved confirming to ICH rules in terms of accuracy, precision, linearity, LOD and LOQ. The proposed approach was practiced to analyze ixabepilone in Ixempra® vials with satisfactory recovery % of 99.89 and RSE% of 1.24. The results achieved were compared to those achieved by an already reported HPLC approach.

Optimization for Powder Yield of Spray-Dried Garlic Extract Powder Using Box-Behnken Experimental Design

2020 ◽  
Vol 859 ◽  
pp. 301-306
Author(s):  
Nattakanwadee Khumpirapang ◽  
Supreeya Srituptim ◽  
Worawut Kriangkrai
Keyword(s):  
Experimental Design ◽  
Spray Drying ◽  
Flow Rate ◽  
Interactive Effect ◽  
Garlic Extract ◽  
Process Conditions ◽  
Inlet Temperature ◽  
Feed Flow Rate ◽  
Air Inlet ◽  
Liquid Feed

Garlic exerts its pharmacological activities; antihyperglycemic, antihyperlipidemia, antihypercholesterolemic, and antihypertensive activity. Therefore, the aim of this study was to determine and optimize the influence of the individual and interactive effect of process conditions variables on the yield of garlic extract powders by three factors and three level-Box-Behnken design under response surface methodology. Spray drying processes the transformation of a garlic juice extract into a dried powder, where usually maltodextrin (MD) as a drying agent is used. According to experimental design, the mixing of garlic juice extract (85 – 95 %w/w) and MD (5 – 15 %w/w) were dried at an air inlet temperature 110°C - 150°C and liquid feed flow rate 5 – 35 rpm. The optimum spray-drying process conditions which maximized the yield of garlic extract powder (31%w/w) were found as follows: air inlet temperature of 150°C, the liquid feed flow rate of 16 rpm, and 5 %w/w MD. The experimental values slightly closed to the corresponding predicted values. Hence, the developed model was adequate and possible to use.

scholarly journals NILAI TAMBAH MINYAK AKAR WANGI DENGAN PEMEKATAN KADAR VETIVEROL MENGGUNAKAN EKSTRAKSI CO2 FLUIDA SUPERKRITIK

2014 ◽  
Vol 16 (2) ◽  
pp. 76-81 ◽  
Author(s):  
Anny Sulaswatty ◽  
Egi Agustian
Keyword(s):  
Carbon Dioxide ◽  
Refractive Index ◽  
Specific Gravity ◽  
Supercritical Fluid Extraction ◽  
Supercritical Fluid ◽  
Flow Rate ◽  
Optical Rotation ◽  
Process Conditions ◽  
Fluid Extraction ◽  
Great Opportunity

Potensi Indonesia akan minyak akar wangi yang berorientasi ekspor dalam industri kosmetik, parfum, sabun, keperluan terapi, antiseptik, massage oil, farmasi dan pestisida memberikan peluang yang besar untuk memenuhi kebutuhan dunia. Guna nilai tambah minyak akar wangi dengan meningkatkan kadar vetiverol sebagai komponen utama, diaplikasikan teknologi ekstraksi fluida karbondioksida superkritik yang merupakan perpaduan ekstraksi, fraksinasi dan deodorisasi dengan didukung keunggulan karbondioksida sebagai pelarut yang inert, ramah lingkungan, mudah dipisahkan, dan berdaya larut tinggi.  Minyak akar wangi Garut (Java vetiver oil) sebagai bahan baku, mempunyai karakteristik  kadar vetiverol  39.03 %; Bobot jenis 0.9977; indeks bias 1.5247;  putaran optik +38.1; kelarutan dalam alkohol 95%  yaitu 1:1 jernih; bilangan asam 28.1; bilangan ester 24.6; bilangan ester setelah asetilasi 115.5; serta tidak mengandung minyak lemak dan  minyak keruing. Pemilihan kondisi proses guna menghasilkan kandungan vetiverol optimal dilakukan dengan memvariasikan laju alir gas CO2, tekanan dan suhu sebagai parameter penting dalam keberhasilan proses ekstraksi minyak akar wangi dengan fluida CO2 superkritik. Pemilihan laju alir konstan dan lebih stabil  diperoleh pada 5.5 liter/menit, sedangkan untuk variasi tekanan ekstraktor (1500, 1750, 2000 psi) dan suhu ekstraktor (40-50oC);  tekanan dan suhu separator  500 psi dan 25oC serta waktu proses selama lima jam dengan pengambilan ekstrak setiap jam. Tekanan dan suhu proses yang optimal diperoleh pada 1750 psi dan suhu 40oC  dengan  rafinat minyak akar wangi berkadar vetiverol  51.82 %,  bilangan ester 7.2 dan bilangan ester setelah asetilasi  172.4. Tingginya tekanan dan rendahnya suhu berpengaruh terhadap perolehan ekstrak; penurunan rafinat; peningkatan nilai  bobot jenis ekstrak dan rafinat; indeks bias ekstrak dan rafinat; putaran optik ekstrak dan rafinat; peningkatan viskositas ekstrak dan rafinat; peningkatan bilangan ester ekstrak, bilangan ester setelah asetilasi ekstrak, serta kandungan vetiverol.Kata Kunci: Minyak Akar Wangi, Vetiverol, Ekstraksi Fluida Superkritik Potential Indonesian vetiver oil export oriented industry of cosmetics, perfumes, soaps, therapeutic purposes, antiseptic, massage oil, pharmaceutical and pesticide presents a great opportunity to meet the needs of the world. In order to add value vetiver oil by increasing the levels vetiverol as the main component, was applied to carbon dioxide supercritical fluid extraction technology which is a combination of extraction, fractionation and deodorization with excellence supported carbon dioxide as an inert solvent, eco-friendly, easily separated, and the high solubility. Garut vetiver oil (Java vetiver oil) as raw material, has the characteristics vetiverol levels 39.03%, specific gravity of 0.9977; refractive index of 1.5247; optical rotation +38.1; solubility in alcohol 95% is a clear 1:1; acid number 28.1; ester number 24.6; ester number after acetylation 115.5; as well as fats and oils contain no oil keruing. The selection process conditions in order to produce optimal vetiverol content performed by varying the flow rate of CO2 gas, pressure and temperature as an important parameter in the success of vetiver oil extraction with supercritical CO2 fluid. The selection of a constant flow rate and more stable obtained at 5.5 liters / min, whereas for pressure variation extractor (1500-2000 psi) and extractor temperature (40-50oC); separator pressure and temperature of 500 psi and 25 °C as well as the processing time for five hours by taking extracts every hour. Pressure and temperature optimum process obtained at 1750 psi and a temperature of 40oC with rafinat vetiverol vetiver oil yield of 51.82%, ester number 7.2, and ester number after acetylation 172.4. The high pressure and low temperature affect the acquisition of the extract; rafinat decline; increase in the value of specific gravity and rafinat extracts; refractive index and rafinat extract; optical rotation and rafinat extract; increase in the viscosity of the extract and rafinat; increase in numbers ester extract, ester number after acetylation extracts, as well as the content vetiverol. Key word: Vetiver Oil, Vetiverol, Supercritical Fluid Extraction.

scholarly journals HUBUNGAN KINERJA DAN MANFAAT KOPERASI PERTANIAN DI KABUPATEN KOLAKA

Agro Ekonomi ◽  
2017 ◽  
Vol 24 (1) ◽  
pp. 71
Author(s):  
Ilma Sarimutaqiyma Rianse ◽  
Slamet Hartono ◽  
Any Suryantini
Keyword(s):  
Secondary Data ◽  
Social Benefit ◽  
Sem Analysis ◽  
Primary Data ◽  
Financial Report ◽  
Cooperative Development ◽  
Economical Benefit ◽  
Economy Benefit ◽  
Development Orientation ◽  
And Training

This research aimed at investigating : (1) the analysis of cooperation based on agricultural criterion in Kolaka District based on cooperation performance analysis based on agricultural criterion in Kolaka District according to cooperative development orientation and cooperation classification orientation; (2) the cooperation performance based on farmer’s perception and cooperation apparatus; (3) find out the benefit found by the farmer  as the member; (4) the analysis of correlation between performance and benefit obtained by farmer as cooperation member. This research applied analytical method. The data used consists of primary and secondary data. Primary data in this research is taken from questioner answer returned by cooperation apparatus respondent and stakeholders who asses the performance and benefit from 10 Agriculture Cooperation of Kolaka District. Secondary data obtained were as: (a) the data of financial report or the balance 10 Agriculture Cooperation in Kolaka District year 2006-2010, (b) the data of profit and loss data 10 Agriculture Cooperation in Kolaka District year 2006-2010. The research finding shown that based on Cooperation Cllasification Orientation, the Agriculture Cooperation in Kolaka District in average was 61.58 in 2007 and included quite good category. In 2008, the average of the cooperation performance was 62.05 and included in quite good category. In 2009 the average of cooperation performance was 62.38 and included in quite good category. In 2010 the average of cooperation  performance was 61.28 and include in quite good category. Then, majority of cooperation apparatus and stakeholders asses that agriculture cooperation in Kolaka District include in quite good criteria that is 48.75%. furthermore, majority of respondents asses that agriculture cooperation in Kolaka District is beneficial, that is 65%. Based on SEM analysis, the correlation of agriculture cooperation performance positively correlates with the finding benefit by farmers. The correlation of coefficient value  of 0.85 has statistical value 14.40. the correlation of standardization value of 0.85 shows the performance and beneficial agriculture cooperation which brings the real correlation. Sequentially, the performance components give the biggest to smallest con tribution that is, caring towards the community is 0.86. the component of voluntary and opened membership is 0.80. the controlling by member democratically is 0.79. the economically participant of the member is 0.71. the education and training give contribution to 0.25. then to components of cooperation benefit sequentially give the biggest to smallest contribution that is marketing economy benefit is 0.96. credit benefit is 0.88. economical benefit of farmer necessity is 0.86. the contribution to social benefit is 0.48.

A Study on the Effect of Process Parameters on Surface Topography of Al Thin Films on Various Substrates Using AFM

2011 ◽  
Vol 383-390 ◽  
pp. 903-908
Author(s):  
S. Shanmugan ◽  
D. Mutharasu ◽  
Z. Hassan ◽  
H. Abu. Hassan
Keyword(s):  
Thin Films ◽  
Surface Topography ◽  
Flow Rate ◽  
Gas Flow ◽  
Process Conditions ◽  
Gas Flow Rate ◽  
Glass Substrates ◽  
Sputtering Power ◽  
Large Particles ◽  
Ar Gas

Al thin films were prepared over different substrates at various process conditions using DC sputtering. The surface topography of all prepared films was examined using AFM technique. Very smooth, uniform and dense surface were observed for Al films coated over Glass substrates. The observed particle size was nano scale (20 -70 nm) for Glass substrates. Sputtering power showed immense effect on surface roughness with respective to Ar gas flow rate. Noticeable change on surface with large particles was observed in Copper substrates at various sputtering power and gas flow rate.

Sign in / Sign up

Export Citation Format

Share Document