Displacement Back Analysis Research on Bolt-Grouting Supporting Parameter of Rock Mass in Jointed Rock Roadway

2004 ◽  
Vol 261-263 ◽  
pp. 1563-1568
Author(s):  
Le Wen Zhang ◽  
Shu Chen Li ◽  
Shu Cai Li
Keyword(s):  
Rock Mass ◽  
Mass Parameter ◽  
Back Analysis ◽  
Jointed Rock ◽  
Singular Value ◽  
Surrounding Rock ◽  
Elastic Model ◽  
Rock Stability ◽  
The Stability ◽  
Rock Roadway

The method of bolt-grouting supporting, grouting into surrounding rock mass by bolts in jointed rock mass roadway, is obtained wide application. However, it is difficult to determine rock mass parameter of bolt-grouting supporting. This paper begins with the displacement, which is measured easily in practice. The method of back analysis is adopted to calculate the equivalent mechanics parameters of bolt-grouting rock mass. In process of back analysis three mechanics models is supposed which are homogeneous elastic model, inhomogeneous elastic model and elastic-plastic model and corresponding algorithm is established. What's more, this paper discusses the stability of inverse algorithm and copes the problem of back analysis parameter probably instable with QR decomposed algorithm and singular value decomposed algorithm, which will be a theoretical base to determine the mechanics parameter of bolt-grouting supporting rock mass and to estimate the surrounding rock stability. In a word, the method is established to estimate mechanics parameters of bolt-grouting jointed surrounding rock mass, and some significant results are obtained, which are of reference for actual project.

Application of ABAQUS in Surrounding Rock Stability Analysis of Shallow Large Cross-Section Tunnel

2015 ◽  
Vol 777 ◽  
pp. 8-12 ◽  
Author(s):  
Lin Zhen Cai ◽  
Cheng Liang Zhang
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Strong Support ◽  
Surrounding Rock ◽  
Tunnel Engineering ◽  
Tunnel Excavation ◽  
Rock Stability ◽  
Rock Bolting ◽  
Excavation Support ◽  
The Stability

HuJiaDi tunnel construction of Dai Gong highway is troublesome, the surrounding-rock mass give priority to full to strong weathering basalt, surrounding rock integrity is poor, weak self-stability of surrounding rock, and tunnel is prone to collapse. In order to reduce disturbance, taking advantage of the ability of rock mass, excavation adopt the method of "more steps, short footage and strong support". The excavation method using three steps excavation, The excavation footage is about 1.2 ~ 1.5 m; The surrounding rock bolting system still produce a large deformation after completion of the first support construction, it shows that the adopted support intensity cannot guarantee the stability of the tunnel engineering. Using ABAQUS to simulate tunnel excavation support, optimizing the support parameters of the tunnel, conducting comparative analysis with Monitoring and Measuring and numerical simulation results, it shows that the displacement - time curves have a certain consistency in numerical simulation of ABAQUS and Monitoring and Measuring.

scholarly journals Numerical Simulation of Stress Arching Effect in Horizontally Layered Jointed Rock Mass

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1138
Author(s):  
Xiao Huang ◽  
Huaining Ruan ◽  
Chong Shi ◽  
Yang Kong
Keyword(s):  
Rock Mass ◽  
Pressure Coefficient ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Surrounding Rock ◽  
Beam Structure ◽  
Underground Engineering ◽  
Joint Spacing ◽  
Arching Effect ◽  
The Stability

Stress arching effect during the excavation of broken surrounding rock in underground engineering has an important influence on the stability of surrounding rock after underground excavation. To determine the stress arching effect in horizontally layered jointed rock mass, the stress arching characteristics of surrounding rock mass after excavation is analyzed in this study by using a series of numerical tests. The formation mechanism of stress arch is revealed through a comparison of the stress characteristics of a voussoir beam structure and theoretical analysis of multi-block mechanical relationship of jointed rock mass. The method for determining the boundaries of a stress arching zone is proposed, and the influence of various factors on a stress arch is further discussed. Results show that after the excavation of horizontally layered jointed rock mass, the stress arch bunch (SAB) is formed in the lower strata above the cavern, and the global stress arch (GSA) is formed in the higher strata, both of which are symmetrical arch stress patterns. The SAB is the mechanical manifestation of the voussoir beam structure formed by several low-level sandstone layers, and the GSA is caused by the uneven displacement between blocks. Compared with the GSA, the SAB is more sensitive to various influencing factors. The extent of stress arching zone decreases with the increase of an internal friction angle of the joint, lateral pressure coefficient, and overburden depth. In addition, the joint spacing of rock strata is conducive to the development of a stress arch. Results can provide technical support for deformation control and the stability analysis of broken surrounding rock in underground engineering.

scholarly journals Risk Analysis and Extension Assessment for the Stability of Surrounding Rock in Deep Coal Roadway

2019 ◽  
Vol 16 (23) ◽  
pp. 4752
Author(s):  
Chunjing Gao ◽  
Dongmei Huang ◽  
Xikun Chang ◽  
Han Xi
Keyword(s):  
Rock Mass ◽  
Risk Analysis ◽  
Coal Mine ◽  
Element Model ◽  
Surrounding Rock ◽  
Deep Mine ◽  
Factors Affecting ◽  
Rock Stability ◽  
The Stability ◽  
Hazard Sources

In order to evaluate the surrounding rock stability of deep roadways, the diversity of accident hazard sources in deep coal mining is statistically analyzed. To conduct an effective evaluation, first, the risk analysis of the factors affecting the rock mass accidents is carried out, and the comprehensive safety index system of rock accidents in deep mine roadway is established. Further, combining the theory of hazard sources with the extension method, a matter–element model for the risk assessment of rock mass accidents in deep roadway is established. Finally, the hazard sources for the surrounding rock stability of deep roadway in the E-Zhuang coal mine of Xinwen Ming area are evaluated. The results show that the risk grade of the surrounding rock for deep roadways in E-Zhuang coal mine is “B”, which is generally safe, the human factors and organizational management factors are relatively safe, and some suggestions for improvement are put forward.

scholarly journals Investigation of Deep Shaft-Surrounding Rock Support Technology Based on a Post-Peak Strain-Softening Model of Rock Mass

2021 ◽  
Vol 12 (1) ◽  
pp. 253
Author(s):  
Jianjun Zhang ◽  
Yang Wang ◽  
Baicong Yao ◽  
Dongxu Chen ◽  
Chuang Sun ◽  
...  
Keyword(s):  
Rock Mass ◽  
Strain Softening ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Surrounding Rock ◽  
Peak Strain ◽  
Rock Support ◽  
Support Structure ◽  
The Stability ◽  
Surrounding Rock Deformation

To control the large deformation that occurs in deep shaft-surrounding rock, the post-peak strain-softening characteristics of deep jointed rock mass are discussed in detail. An equivalent post-peak strain-softening model of jointed rock mass is established based on continuum theory and the geological strength index surrounding rock grading system, and numerical simulations are performed using FLAC3D software. The convergence-constraint method is used to analyze the rock support structure interaction mechanism. A composiste support technique is proposed in combination with actual field breakage conditions. During the initial support stage, high-strength anchors are used to release the rock stress, and high-stiffness secondary support is provided by well rings and poured concrete. This support technology is applied in the accessory well of a coal mine in Niaoshan, Heilongjiang, China. The stability of the surrounding rock support structure is calculated and analyzed by comparing the ideal elastic-plastic model and equivalent jointed rock mass strain-softening model. The results show that a support structure designed based on the ideal elastic-plastic model cannot meet the stability requirements of the surrounding rock and that radial deformation of the surrounding rock reaches 300 mm. The support structure designed based on the equivalent joint strain-softening model has a convergence rate of surrounding rock deformation of less than 1 mm/d after 35 days of application. The surrounding rock deformation is finally controlled at 140 mm, indicating successful application of the support technology.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

scholarly journals Study on the Deformation Mechanism of Soft Rock Roadway under Blasting Disturbance in Baoguo Iron Mine

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Hong-di Jing ◽  
Yuan-hui Li ◽  
Kun-meng Li
Keyword(s):  
Rock Mass ◽  
Deformation Mechanism ◽  
Soft Rock ◽  
Deformation Monitoring ◽  
Underground Mines ◽  
Blasting Vibration ◽  
Iron Mine ◽  
The Stability ◽  
Soft Rock Roadway ◽  
Rock Roadway

In order to study the deformation mechanism of soft rock roadway in underground mines, it is necessary not only to study the influence of the dynamic disturbance caused by the cyclic mining blasting vibration on the stability of the soft rock roadway but also to study the degradation of the roadway surrounding rock itself and other factors. The paper presented a synthetic research system to investigate the factors that influence roadway rock structure deterioration in Baoguo Iron Mine. Firstly, the stability of rock mass was analyzed from the perspective of the physical and structural characteristics of the rock mass. Afterwards, according to monitoring data of mining blasting vibration, a suitable safety blasting prediction model for Baoguo Iron Mine was determined. And then, combining the results of mining blasting vibration monitoring and deformation monitoring, the effect of cyclic mining blasting on the stability of the soft rock roadway was obtained. By systematically studying the intrinsic factors of rock quality degradation and external environmental disturbances and their interactions, this paper comprehensively explores the deformation mechanism of soft rock roadway and provides the support for fundamentally solving the large deformation problems of soft rock roadway in underground mines.

Hydro-Mechanical Coupled Analysis of the Stability of Surrounding Rock Mass of Underground Water-Sealed Oil Storage

2013 ◽  
Vol 405-408 ◽  
pp. 402-405 ◽  
Author(s):  
Yun Jie Zhang ◽  
Tao Xu ◽  
Qiang Xu ◽  
Lin Bu
Keyword(s):  
Rock Mass ◽  
Underground Water ◽  
Surrounding Rock ◽  
Comsol Multiphysics ◽  
Coupled Analysis ◽  
Coupling Theory ◽  
Oil Storage ◽  
Stability Of Surrounding Rock ◽  
Straight Wall ◽  
The Stability

Based on the fluid-solid coupling theory, we study the stability of surrounding rock mass around underground oil storage in Huangdao, Shandong province, analyze the stress of the surrounding rock mass around three chambers and the displacement change of several key monitoring points after excavation and evaluate the stability of surrounding rock mass using COMSOL Multiphysics software. Research results show that the stress at both sides of the straight wall of cavern increases, especially obvious stress concentration forms at the corners of the cavern, and the surrounding rock mass moves towards the cavern after excavation. The stress and displacement of the surrounding rock mass will increase accordingly after setting the water curtains, but the change does not have a substantive impact on the stability of surrounding rock mass.

Precise grading of surrounding rock based on the numerical calculation of the jointed rock mass

2022 ◽  
pp. 1-32
Author(s):  
Dan Huang ◽  
Xiao-Qing Li ◽  
Wen-Chao Song
Keyword(s):  
Rock Mass ◽  
Numerical Calculation ◽  
Calculation Method ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Surrounding Rock ◽  
Geological Survey ◽  
Survey Method ◽  
Synthetic Rock ◽  
Numerical Calculation Method

In this study, grading of surrounding rock was based on rock mass basic quality (BQ) values according to the specifications in China. Numerical approach was to construct synthetic rock mass (SRM) model to represent the jointed rock mass, and obtain the strength of the rock mass. It represented intact rock by the bonded particle model (BPM), and represent joint behaviour by the smooth joint model (SJM) to construct the discrete fracture network (DFN). In the Hongtuzhang Tunnel, the micro properties of granite cores with different weathered degrees were determined by the validation process, and the calculation representative elementary volume (REV) of surrounding rock was 15 m×15 m. Five slightly weathered, three slightly to moderately weathered, and two moderately weathered granite surrounding rock mass models were established based on the probability distribution of joint sets in each borehole, the conversion BQ value was acquired according by the calculated strength of rock mass model. It was discussed the differences of surrounding rock grades between the geological survey method and the numerical calculation method, and then found that the geological survey report is higher than the numerical calculation method predicted. And the numerical calculation is consistent with the actual excavation of rock mass at borehole A1388.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

scholarly journals Numerical Simulation on Large Deformation of Weak Rock Mass Tunnel Under High Geostress

2018 ◽  
Vol 175 ◽  
pp. 03025
Author(s):  
Feng Zhou ◽  
Hongjian Jiang ◽  
Xiaorui Wang
Keyword(s):  
Rock Mass ◽  
Large Deformation ◽  
Lateral Pressure ◽  
Simulation Analysis ◽  
Pressure Coefficient ◽  
Surrounding Rock ◽  
Analog Simulation ◽  
Lateral Pressure Coefficient ◽  
High Geostress ◽  
The Stability

The problem about the stability of tunnel surrounding rock is always an important research object of geotechnical engineering, and the right or wrong of the result from stability analysis on surrounding rock is related to success or failure of an underground project. In order to study the deformation rules of weak surrounding rock along with lateral pressure coefficient and burying depth varying under high geostress and discuss the dynamic variation trend of surrounding rock, the paper based on the application of finite difference software of FLAC3D, which can describe large deformation character of rock mass, analog simulation analysis of surrounding rock typical section of the class II was proceeded. Some conclusions were drawn as follows: (1) when burying depth is invariable, the displacements of tunnel surrounding rock have a trend of increasing first and then decreasing along with increasing of lateral pressure coefficient. The floor heave is the most sensitive to change of lateral pressure coefficient. The horizontal convergence takes second place. The vault subsidence is feeblish to change of lateral pressure coefficient. (2) The displacements of tunnel surrounding rock have some extend increase along with increasing of burying depth. The research conclusions are very effective in analyzing the stability of surrounding rock of Yunling tunnel. These are going to be a reference to tunnel supporting design and construction.

Sign in / Sign up

Export Citation Format

Share Document