Mechanical Properties of Photosensitive Polyimide Film by Nanoindentation and Microtensile Test

2005 ◽  
Vol 297-300 ◽  
pp. 237-243 ◽  
Author(s):  
Shin Hur ◽  
Sung In Hong ◽  
Dong Kil Shin
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Polyimide Film ◽  
Nanoindentation Test ◽  
Strain Rates ◽  
Polyimide Films ◽  
Free Standing ◽  
Micro Fabrication ◽  
Microtensile Test

A free-standing photosensitive polyimide film with thickness of 10µm is fabricated with the different curing temperatures using a micro fabrication process. The microtensile specimens of a strip type are made to facilitate a tensile testing. The Young’s modulus and yield strength of photosensitive polyimide film are measured with various strain rates from 10-4 /s to 10-3 /s by using a microtensile test. Also, the hardness and Young’s modulus of polyimide films are obtained from nanoindentation test. Finally, the mechanical properties measured from microtensile test are compared with those from nanoindentation test.

The mechanical Properties of CVD Diamond Films, and Diamond Coated Fibres and Wires

1995 ◽  
Vol 383 ◽  
Author(s):  
E D Nicholson ◽  
J E Field ◽  
P G Partridge ◽  
M N R Ashfold
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Microwave Plasma ◽  
Young's Modulus ◽  
Protective Coatings ◽  
Small Diameter ◽  
Cvd Diamond ◽  
Film Stress ◽  
Free Standing ◽  
Film Property

ABSTRACTTwo areas of thin film property measurement are addressed. The first is that of flat films, either on a substrate or free-standing. The film properties only are of interest. Therefore, when the film remains attached to a substrate during testing, an appropriate analysis is used to subtract the effect of the substrate. The films under test are prospective protective coatings and ‘window’ materials for infrared applications, namely CVD diamond (Hot filament Assisted, HFACVD and Microwave plasma assisted, MPACVD) and Germanium carbide (Ge:C). The mechanical properties under investigation are the Young's modulus and the internal film stress.In the second case the substrates are small diameter fibres and wires coated with CVD diamond. The mechanical properties measured were composite, containing contributions from both the substrate and the film. These coated fibres and wires, have possible applications as reinforcement phases in the production of composites. They are silicon carbide (SiC) and Tungsten (W) of diameters varying between 10 and 125μm. A technique has been developed to measure the Young's modulus of individual coated fibres.

Hardness and Young's modulus of amorphous a-SiC thin films determined by nanoindentation and bulge tests

1994 ◽  
Vol 9 (1) ◽  
pp. 96-103 ◽  
Author(s):  
M.A. El Khakani ◽  
M. Chaker ◽  
A. Jean ◽  
S. Boily ◽  
J.C. Kieffer ◽  
...  
Keyword(s):  
Thin Films ◽  
Mechanical Properties ◽  
Silicon Carbide ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Chemical Vapor ◽  
Free Standing ◽  
Film Composition ◽  
Sputtering Deposition ◽  
Sic Films

Due to its interesting mechanical properties, silicon carbide is an excellent material for many applications. In this paper, we report on the mechanical properties of amorphous hydrogenated or hydrogen-free silicon carbide thin films deposited by using different deposition techniques, namely plasma enhanced chemical vapor deposition (PECVD), laser ablation deposition (LAD), and triode sputtering deposition (TSD). a-SixC1−x: H PECVD, a-SiC LAD, and a-SiC TSD thin films and corresponding free-standing membranes were mechanically investigated by using nanoindentation and bulge techniques, respectively. Hardness (H), Young's modulus (E), and Poisson's ratio (v) of the studied silicon carbide thin films were determined. It is shown that for hydrogenated a-SixC1−x: H PECVD films, both hardness and Young's modulus are dependent on the film composition. The nearly stoichiometric a-SiC: H films present higher H and E values than the Si-rich a-SixC1−x: H films. For hydrogen-free a-SiC films, the hardness and Young's modulus were as high as about 30 GPa and 240 GPa, respectively. Hydrogen-free a-SiC films present both hardness and Young's modulus values higher by about 50% than those of hydrogenated a-SiC: H PECVD films. By using the FTIR absorption spectroscopy, we estimated the Si-C bond densities (NSiC) from the Si-C stretching absorption band (centered around 780 cm−1), and were thus able to correlate the observed mechanical behavior of a-SiC films to their microstructure. We indeed point out a constant-plus-linear variation of the hardness and Young's modulus upon the Si-C bond density, over the NSiC investigated range [(4–18) × 1022 bond · cm−3], regardless of the film composition or the deposition technique.

scholarly journals Crystallite Size on Micromechanical Characteristics of WO3 Microparticles

2021 ◽  
Vol 9 (3A) ◽  
Author(s):  
Asep Bayu Dani Nandiyanto ◽  
◽  
Farid Triawan ◽  
Rubani Firly ◽  
Kikuo Kishimoto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Crystallite Size ◽  
Young’S Modulus ◽  
Precise Measurement ◽  
Young's Modulus ◽  
Nanoindentation Test ◽  
Micromechanical Characteristics ◽  
High Pressure Reaction ◽  
The Relationship

This study evaluated the relationship between crystallite size and micromechanical characteristics of micrometersized monoclinic WO3 particles. To avoid the existence of other parameters in the measurement (such as impurities and porous structure in the particle), micrometer WO3 particles were prepared using a direct heat treatment of ultrapure micrometer-sized ammonium tungstate powders. The crystallite size was controlled independently in constant WO3 particle outer diameters to obtain a precise measurement result. The mechanical properties, i.e., hardness and Young’s modulus, were measured by load-controlled nanoindentation test on the singular WO3 particles. The force and displacement relationship data was plotted and analyzed to obtain the relationship between crystallite size and mechanical properties. The results revealed that the micromechanical properties of WO3 particles were strongly dependent on the crystallite size. The hardness and Young’s modulus values increased more than three times when increasing the crystallite size to about 40 nm. The study was completed with a proposed mechanism of crack propagation inside the particle due to static load. The study demonstrates the important role of crystallite size in determining the micromechanical characteristics of WO3 particles. The result is useful especially when utilizing WO3 microparticles for various processes involving extreme conditions, such as high pressure reaction.

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

2019 ◽  
Vol 107 (2) ◽  
pp. 207 ◽  
Author(s):  
Jaroslav Čech ◽  
Petr Haušild ◽  
Miroslav Karlík ◽  
Veronika Kadlecová ◽  
Jiří Čapek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Alloying ◽  
Young’S Modulus ◽  
Milling Time ◽  
Young's Modulus ◽  
Element Model ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Particles ◽  
Complete Homogenization

FeAl20Si20 (wt.%) powders prepared by mechanical alloying from different initial feedstock materials (Fe, Al, Si, FeAl27) were investigated in this study. Scanning electron microscopy, X-ray diffraction and nanoindentation techniques were used to analyze microstructure, phase composition and mechanical properties (hardness and Young’s modulus). Finite element model was developed to account for the decrease in measured values of mechanical properties of powder particles with increasing penetration depth caused by surrounding soft resin used for embedding powder particles. Progressive homogenization of the powders’ microstructure and an increase of hardness and Young’s modulus with milling time were observed and the time for complete homogenization was estimated.

scholarly journals First principles computation of composition dependent elastic constants of omega in titanium alloys: implications on mechanical behavior

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. Salloom ◽  
S. A. Mantri ◽  
R. Banerjee ◽  
S. G. Srinivasan
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
First Principles ◽  
Young's Modulus ◽  
Group Vi ◽  
Group V ◽  
Β Phase ◽  
Ti Alloys ◽  
Ω Phase ◽  
Stabilizer Concentration

AbstractFor decades the poor mechanical properties of Ti alloys were attributed to the intrinsic brittleness of the hexagonal ω-phase that has fewer than 5-independent slip systems. We contradict this conventional wisdom by coupling first-principles and cluster expansion calculations with experiments. We show that the elastic properties of the ω-phase can be systematically varied as a function of its composition to enhance both the ductility and strength of the Ti-alloy. Studies with five prototypical β-stabilizer solutes (Nb, Ta, V, Mo, and W) show that increasing β-stabilizer concentration destabilizes the ω-phase, in agreement with experiments. The Young’s modulus of ω-phase also decreased at larger concentration of β-stabilizers. Within the region of ω-phase stability, addition of Nb, Ta, and V (Group-V elements) decreased Young’s modulus more steeply compared to Mo and W (Group-VI elements) additions. The higher values of Young’s modulus of Ti–W and Ti–Mo binaries is related to the stronger stabilization of ω-phase due to the higher number of valence electrons. Density of states (DOS) calculations also revealed a stronger covalent bonding in the ω-phase compared to a metallic bonding in β-phase, and indicate that alloying is a promising route to enhance the ω-phase’s ductility. Overall, the mechanical properties of ω-phase predicted by our calculations agree well with the available experiments. Importantly, our study reveals that ω precipitates are not intrinsically embrittling and detrimental, and that we can create Ti-alloys with both good ductility and strength by tailoring ω precipitates' composition instead of completely eliminating them.

scholarly journals Tailoring a Low Young Modulus for a Beta Titanium Alloy by Combining Severe Plastic Deformation with Solution Treatment

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3467
Author(s):  
Anna Nocivin ◽  
Doina Raducanu ◽  
Bogdan Vasile ◽  
Corneliu Trisca-Rusu ◽  
Elisabeta Mirela Cojocaru ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Solution Treatment ◽  
Young Modulus ◽  
Orthopedic Implants ◽  
Beta Titanium Alloy

The present paper analyzed the microstructural characteristics and the mechanical properties of a Ti–Nb–Zr–Fe–O alloy of β-Ti type obtained by combining severe plastic deformation (SPD), for which the total reduction was of etot = 90%, with two variants of super-transus solution treatment (ST). The objective was to obtain a low Young’s modulus with sufficient high strength in purpose to use the alloy as a biomaterial for orthopedic implants. The microstructure analysis was conducted through X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) investigations. The analyzed mechanical properties reveal promising values for yield strength (YS) and ultimate tensile strength (UTS) of about 770 and 1100 MPa, respectively, with a low value of Young’s modulus of about 48–49 GPa. The conclusion is that satisfactory mechanical properties for this type of alloy can be obtained if considering a proper combination of SPD + ST parameters and a suitable content of β-stabilizing alloying elements, especially the Zr/Nb ratio.

scholarly journals Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 461
Author(s):  
Konrad Kosiba ◽  
Konda Gokuldoss Prashanth ◽  
Sergio Scudino
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Equilibrium Phase ◽  
Antibacterial Properties ◽  
Equilibrium Phase Diagram ◽  
Compressive Yield Strength ◽  
X Ray ◽  
Fine Grained ◽  
Equilibrium Phases

The phase and microstructure formation as well as mechanical properties of the rapidly solidified Mg67Ag33 (at. %) alloy were investigated. Owing to kinetic constraints effective during rapid cooling, the formation of equilibrium phases is suppressed. Instead, the microstructure is mainly composed of oversaturated hexagonal closest packed Mg-based dendrites surrounded by a mixture of phases, as probed by X-ray diffraction, electron microscopy and energy dispersive X-ray spectroscopy. A possible non-equilibrium phase diagram is suggested. Mainly because of the fine-grained dendritic and interdendritic microstructure, the material shows appreciable mechanical properties, such as a compressive yield strength and Young’s modulus of 245 ± 5 MPa and 63 ± 2 GPa, respectively. Due to this low Young’s modulus, the Mg67Ag33 alloy has potential for usage as biomaterial and challenges ahead, such as biomechanical compatibility, biodegradability and antibacterial properties are outlined.

scholarly journals Effect of Nanopores on Mechanical Properties of the Shape Memory Alloy

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 529
Author(s):  
Chunzhi Du ◽  
Zhifan Li ◽  
Bingfei Liu
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Shape Memory ◽  
Young’S Modulus ◽  
Residual Strain ◽  
Surface Effect ◽  
Young's Modulus ◽  
Strain Curve ◽  
Stress Strain ◽  
Strength Limit

Nanoporous Shape Memory Alloys (SMA) are widely used in aerospace, military industry, medical and health and other fields. More and more attention has been paid to its mechanical properties. In particular, when the size of the pores is reduced to the nanometer level, the effect of the surface effect of the nanoporous material on the mechanical properties of the SMA will increase sharply, and the residual strain of the SMA material will change with the nanoporosity. In this work, the expression of Young’s modulus of nanopore SMA considering surface effects is first derived, which is a function of nanoporosity and nanopore size. Based on the obtained Young’s modulus, a constitutive model of nanoporous SMA considering residual strain is established. Then, the stress–strain curve of dense SMA based on the new constitutive model is drawn by numerical method. The results are in good agreement with the simulation results in the published literature. Finally, the stress-strain curves of SMA with different nanoporosities are drawn, and it is concluded that the Young’s modulus and strength limit decrease with the increase of nanoporosity.

Effect of Castor Oil Impregnation on the Physical and Mechanical Properties of Bacterial Cellulose

2012 ◽  
Vol 3 (1) ◽  
pp. 13-26
Author(s):  
Myrtha Karina ◽  
Lucia Indrarti ◽  
Rike Yudianti ◽  
Indriyati
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Bacterial Cellulose ◽  
Young’S Modulus ◽  
Castor Oil ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
Scanning Electron Micrographs ◽  
Elongation At Break ◽  
Acetone Water

The effect of castor oil on the physical and mechanical properties of bacterial cellulose is described. Bacterial cellulose (BC) was impregnated with 0.5–2% (w/v) castor oil (CO) in acetone–water, providing BCCO films. Scanning electron micrographs revealed that the castor oil penetrated the pores of the bacterial cellulose, resulting in a smoother morphology and enhanced hydrophilicity. Castor oil caused a slight change in crystallinity indices and resulted in reduced tensile strength and Young's modulus but increased elongation at break. A significant reduction in tensile strength and Young's modulus was achieved in BCCO films with 2% castor oil, and there was an improvement in elongation at break and hydrophilicity. Impregnation with castor oil, a biodegradable and safe plasticiser, resulted in less rigid and more ductile composites.

Mechanical Properties of Pyrolytic "SiOCN" Thin Coatings

1993 ◽  
Vol 308 ◽  
Author(s):  
Sandrine Bec ◽  
André Tonck ◽  
Jean-Luc Loubet
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Ceramic Coatings ◽  
Optical Observation ◽  
Thin Coatings ◽  
Polymer Precursors ◽  
Polymeric State

ABSTRACTPyrolysis of polymer precursors (polysilazane) is a technologically and economically interesting way to produce thin ceramic coatings. However, many cracks appear and decohesion occurs during pyrolysis when the ceramic coatings (SiOCN) are thicker than 0.5 micrometers. In order to understand these cracking phenomena, the coatings are mechanically characterized by nanoindentation at different stages of the pyrolysis heat treatment.During pyrolysis, the cracking temperature is detected by in-situ optical observation. The thickness of the coatings varies during pyrolysis from 3 micrometers at the polymeric state to 1 micrometer at the ceramic state. The coatings' properties, hardness and Young's modulus are evaluated after heat treatment, taking into account the substrate's influence. A large variation of these properties occurs at the cracking temperature. Both the hardness and the Young's modulus are multiplied by a factor of 10. By analysing these results, we show that cracking is correlated with the evolution of the coatings' mechanical properties during the transformation.

Sign in / Sign up

Export Citation Format

Share Document