Fracture Mechanics and Fatigue Cracks Reduction of Polymeric Asphalt Pavements

2006 ◽  
Vol 324-325 ◽  
pp. 1277-1280
Author(s):  
Akbar K. Haghi ◽  
Mahyar Arabani ◽  
Morteza Shakeri
Keyword(s):  
Performance Test ◽  
Fatigue Cracks ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Pavements ◽  
Computational Studies ◽  
Strength Tests ◽  
Asphalt Mix ◽  
Indirect Tensile ◽  
Cracking Process

The objective of this research was to advance understanding of the cracking process via laboratory and computational studies and to convey the obtained results in a form that can be utilized for the prediction of cracking in flexible pavements. The primary purpose of this project reported herein was to evaluate the effects of tire cords on the fatigue response of asphalt mix and to develop recommendations for improving the fatigue performance of asphalt pavements. Based on the results presented in this paper, the indirect tensile strength tests can propose as a simple performance test for fatigue cracking of asphalt mixture. The results clearly demonstrate a great potential procedure for the fatigue cracking evaluation of asphalt mixture.

Evaluation of Asphalt Mixture Performance Using Cracking and Durability Tests at a Full-Scale Pavement Facility

2021 ◽  
pp. 036119812110218
Author(s):  
Amir Golalipour ◽  
Varun Veginati ◽  
David J. Mensching
Keyword(s):  
Performance Test ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Field Performance ◽  
Optimization Procedure ◽  
Cyclic Fatigue ◽  
Intermediate Temperature ◽  
Index Test ◽  
Reclaimed Asphalt ◽  
Indirect Tensile

In the asphalt materials community, the most critical research need is centered around a paradigm shift in mixture design from the volumetric process of the previous 20-plus years to an optimization procedure based on laboratory-measured mechanical properties that should lead to an increase in long-term pavement performance. This study is focused on advancing the state of understanding with respect to the value of intermediate temperature cracking tests, which may be included in a balanced mix design. The materials included are plant-mixed, laboratory-compacted specimens reheated from the 2013 Federal Highway Administration’s (FHWA’s) Accelerated Loading Facility (ALF) study on reclaimed asphalt pavement/reclaimed asphalt shingle (RAP/RAS) materials. Six commonly discussed intermediate temperature (cracking and durability) performance testing (i.e., Asphalt Mixture Performance Tester [AMPT] Cyclic Fatigue, Cantabro, Illinois Flexibility Index Test [I-FIT], Indirect Tensile Cracking [ITC, also known as IDEAL-CT], Indirect Tensile Nflex, and Texas Overlay Test) were selected for use in this study based on input from stakeholders. Test results were analyzed to compare differences between the cracking tests. In addition, statistical analyses were conducted to assess the separation among materials (lanes) for each performance test. Cyclic fatigue and IDEAL-CT tests showed the most promising results. The ranking from these two tests’ index parameters matched closely with ALF field performance. Furthermore, both showed reasonable variability of test data and they were successful in differentiating between different materials.

Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements

2011 ◽  
Vol 415-417 ◽  
pp. 1531-1536
Author(s):  
Fu Ming Liu ◽  
Duan Yi Wang
Keyword(s):  
Tensile Strain ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Asphalt Pavements ◽  
Moisture Susceptibility ◽  
Scale Test ◽  
And Performance ◽  
Wheel Tracking ◽  
Fatigue Endurance

This paper presents the results of laboratory and performance tests for an asphalt treated base (ATB) and mixes developed in this study for perpetual asphalt pavements. Laboratory tests for the mixes included moisture susceptibility, wheel tracking and fatigue tests. The results of performance test indicated that the resistances of the high content binder ATB against moisture and fatigue damage were better than those of the lower one. It was also found from the full scale test sections that the tensile strain values at the bottom of the asphalt layer for the ATB sections were low when the asphalt layer thicknesses of the ATB sections were not thicker than those of the conventional sections. All the tensile strain values measured from the ATB sections were within the fatigue endurance limit of 70 microstrain which is the fatigue criterion of a perpetual asphalt pavement.

Performance-based mix design of unmodified and lime-modified hot mix asphalt

2012 ◽  
Vol 39 (7) ◽  
pp. 824-833 ◽  
Author(s):  
Sangyum Lee ◽  
Cheolmin Baek ◽  
Je-Jin Park
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Mix Design ◽  
Direct Tension ◽  
Element Analysis ◽  
Asphalt Content ◽  
National Cooperative

This paper presents the performance evaluation of unmodified and lime-modified hot mix asphalt (HMA) mixtures at varying asphalt content using asphalt mixture performance test developed from National Cooperative Highway Research Program project 9-19 and 9-29 and the viscoelastic continuum damage finite element analysis. Test methods adopted in this study are the dynamic modulus test for stiffness, the triaxial repeated load permanent deformation test for rutting, and the direct tension test for fatigue cracking. The findings from this study support conventional understanding of the effects of asphalt content and lime modification on the fatigue cracking and rutting performance. Finally, the optimum asphalt content for both lime-modified and unmodified mixtures are proposed based on the knowledge gleaned from the performance-based mix design methodology. With additional validation and calibration, the comprehensive methodology described in this paper may serve as the foundation for a performance-based HMA mix design and performance-related HMA specifications.

scholarly journals Effect of aging on the physical-mechanical characteristics of an asphalt mixture with rubber

2021 ◽  
Vol 2102 (1) ◽  
pp. 012020
Author(s):  
J G Bastidas-Martínez ◽  
J C Ruge ◽  
R A G Zuluaga ◽  
L Medina
Keyword(s):  
Mechanical Characteristics ◽  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Mix ◽  
Aging Conditions ◽  
Short And Long Term ◽  
Indirect Tensile ◽  
Recycled Rubber ◽  
Monotonic Loads

Abstract This paper evaluated the physical-mechanical characteristics of two asphalt mixtures. One mix with conventional asphalt and the other with asphalt modified with recycled rubber grain. For this purpose, the asphalt mix designs were made by means of the Marshall methodology. Subsequently, asphalt mixtures were manufactured to analyze the action of monotonic loads (indirect tensile strength) and dynamic loads (resilient modulus). Previously, each type of asphalt mix was subjected to short- and long-term aging conditions, following Aastho guidelines. It is concluded that the incorporation of recycled rubber grain makes the changes in mechanical properties with aging not very noticeable in relation to mixtures without this material.

scholarly journals Evaluation of Fatigue Life of CRM-Reinforced SMA and Its Relationship to Dynamic Stiffness

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Nuha Salim Mashaan ◽  
Mohamed Rehan Karim ◽  
Mahrez Abdel Aziz ◽  
Mohd Rasdan Ibrahim ◽  
Herda Yati Katman ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Resilient Modulus ◽  
Dynamic Stiffness ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Crumb Rubber ◽  
Fatigue Properties ◽  
Tensile Fatigue ◽  
Indirect Tensile

Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

scholarly journals Laboratory and Field Aging Effect on Bitumen Chemistry and Rheology in Porous Asphalt Mixture

2019 ◽  
Vol 2673 (3) ◽  
pp. 365-374 ◽  
Author(s):  
Ruxin Jing ◽  
Aikaterini Varveri ◽  
Xueyan Liu ◽  
Athanasios Scarpas ◽  
Sandra Erkens
Keyword(s):  
Asphalt Mixture ◽  
Chemical Properties ◽  
Aging Effect ◽  
Tensile Tests ◽  
Asphalt Pavements ◽  
Porous Asphalt ◽  
Oxidative Aging ◽  
Infrared Spectrometer ◽  
Short And Long Term ◽  
Indirect Tensile

Oxidative aging takes place in bituminous materials during the construction and service life of asphalt pavements and has a significant effect on their performance. In this study, porous asphalt cores were obtained from field test sections each year from 2014 to 2017. The evolution of the properties of the field cores and the recovered bitumen with time was investigated. Cyclic indirect tensile tests were performed to determine changes in the mechanical behavior of porous asphalt due to aging. Additionally, bitumen was extracted and recovered from 13 mm slices along the depth of the cores. The rheological and chemical properties of the recovered bitumen, as well as that of original bitumen aged in standard short- and long-term aging protocols, were investigated by means of dynamic shear rheometer and Fourier transform infrared spectrometer. The results show that the degree of aging is spatially dependent, resulting in a stiffness gradient within the asphalt layer. Moreover, the results demonstrate a weak relation between field aging and the standard laboratory aging protocols.

scholarly journals Study of Asphalt-Concrete Pavement Fatigue Modeling

2021 ◽  
Vol 16 (1) ◽  
pp. 24-36
Author(s):  
Peteris Skels ◽  
Viktors Haritonovs ◽  
Pavel Akishin ◽  
Andris Freimanis
Keyword(s):  
Fatigue Cracks ◽  
Fatigue Cracking ◽  
Element Model ◽  
Fatigue Behaviour ◽  
Asphalt Pavements ◽  
Fatigue Properties ◽  
Surface Loading ◽  
Asphalt Concrete Pavement ◽  
Cyclic Surface

Deterioration of asphalt pavements due to fatigue cracking is one of the most common highway pavement failure types. If the fatigue cracks are allowed to develop and grow, the driving comfort and safety, i.e., serviceability of the pavement, decreases. Pavement fatigue behaviour is not a straightforward mechanism and involves many factors and effects, thus computational methods are developed in order to help understand how the pavement works. This paper explores the accuracy and applicability of a less computational resource demanding procedure that uses transient material mechanical behaviour to model the long-term behaviour of a pavement structure. First, the mechanical and fatigue properties of asphalt were determined at the laboratory. Then a four-layer finite-element model was created using Ansys software. Two different models – with and without infinity elements – and two different fatigue simulation procedures – full and simplified – were considered. Material parameters were obtained by the laboratory tests and material properties degraded over time. Cyclic surface loading was applied to simulate the passing of a truck – 6 million fatigue cycles were simulated.

scholarly journals Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1738 ◽  
Author(s):  
Hongyin Li ◽  
Hailong Jiang ◽  
Wenwu Zhang ◽  
Peng Liu ◽  
Shanshan Wang ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Field Investigation ◽  
Compression Tests ◽  
Modified Asphalt ◽  
Asphalt Mix ◽  
Low Temperature Cracking ◽  
Indirect Tensile

Resistance of asphalt mix to low-temperature cracking and rutting at high temperature is very important to ensure the service performance of asphalt pavement under seasonal changes in temperature and loading. However, it is challenging to balance the improvement of such resistance by using additives, e.g., anti-rutting agent (ARA). This study focuses on improving the flexibility of anti-rutting asphalt mix by incorporating crumb rubber (CR) and ARA. The properties of the prepared modified asphalt mix were evaluated in the laboratory by performing wheel tracking, three-point bending, indirect tensile, and uniaxial compression tests. The experimental results showed that the dynamic stability of modified asphalt mix was significantly increased due to the addition of ARA and further improved by incorporating CR. The maximum bending strain at −10 °C was increased due to the contribution of CR. The results of indirect tensile strength and resilient modulus further indicated that the CR-modified anti-rutting mixture was more flexible. Moreover, the field observation and evaluation indicated that the CR-modified anti-rutting asphalt pavement met the standard requirements, better than normal asphalt mixture in many parameters. A conclusion can be made that incorporating CR in asphalt mixture prepared with ARA can improve pavement performance at both high and low in-service temperatures.

scholarly journals Laboratory Study on the Fatigue Resistance of Asphaltic Concrete Containing Titanium Dioxide

2018 ◽  
Vol 34 ◽  
pp. 01021
Author(s):  
Rosnawati Buhari ◽  
Mohd Ezree Abdullah ◽  
Mohd Khairul Ahmad ◽  
Saiful Azhar Tajudin ◽  
Siti Khatijah Abu Bakar
Keyword(s):  
Titanium Dioxide ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Indirect Tensile

This study aims to evaluate the fatigue performance of modified asphalt mixture using Indirect Tensile Fatigue Test. Titanium Dioxide (TiO2) powder in a form of rutile was used for producing asphalt concrete with lower mixing and compaction temperature compared to conventional hot mix asphalt without reducing its physical and mechanical also resistance to fatigue. The characteristic of the asphalt and modified asphalt was evaluated using penetration test, softening test and rotational viscosity test. Titanium dioxide of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance and to fulfill the objectives of this experimental study. As a result, TiO2 as an additive is potential to decrease the penetration and increasing the softening point of the asphalt. In terms of fatigue performance testing, addition TiO2 additive does help in improving the fatigue properties as it shows greater result than the control asphalt. In conclusion, TiO2 is great in improving fatigue properties.

scholarly journals A Study on the Design Method for the Material Composition of Small Particle-Size Asphalt Mixture for Controlling Cracks in Asphalt Pavement

2019 ◽  
Vol 9 (10) ◽  
pp. 1988 ◽  
Author(s):  
Jiyu Xin ◽  
Jianzhong Pei ◽  
Mitsuyoshi Akiyama ◽  
Rui Li ◽  
Jiupeng Zhang ◽  
...  
Keyword(s):  
Particle Size ◽  
Crack Resistance ◽  
Small Particle ◽  
Performance Test ◽  
Design Method ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Material Composition ◽  
Asphalt Pavements ◽  
Small Particle Size

Generally, various kinds of cracks are the main type of distresses during the service period of asphalt pavements. To save maintenance costs and improve the crack resistance of asphalt pavements effectively, this paper presents a unique design method for the material composition of small particle-size (SPS) asphalt mixture for controlling cracks in asphalt pavement. First, Stone Mastic Asphalt (SMA)-II was designed as a basic gradation according to the A.N. Talbot curve and SMA-II-1, SMA-II-2 and SMA-II-3 were designed according to the Superpave mix design method, the Bailey method and the Particle interference theory, respectively. Second, based on Marshall test results, the optimal fiber content and optimal asphalt content of three gradations were determined. Then, the influence of the passing rate of 1.18-mm sieve and 0.075-mm sieve on the air voids of SMA-II and the influence of the filler-asphalt ratio on the performance of SMA-II were investigated, and an appropriate range of filler-asphalt ratio was obtained. Finally, a high-temperature performance test, a water stability test, and a skid resistance test demonstrate that the overall performance of SMA-II can satisfy the specifications. A low-temperature bend test and analysis of bending strain energy density show that SMA-II with a crumb rubber modifier and a polymer fiber has better crack resistance performance than SMA-I (SBS-modified mixture). Life-cycle cost analysis shows the economic advantage of SPS asphalt thin overlays over traditional AC-13 thin overlays.

Sign in / Sign up

Export Citation Format

Share Document